Illinois to North Carolina: general contractor license reciprocity
Illinois does not issue a statewide general contractor license, so there is nothing to transfer. Here is North Carolina's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
NASCLA Accredited Examination in place of the North Carolina Building Contractor examination
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
North Carolina does not recognize an out-of-state general contractor license on its own, but it does accept the NASCLA Accredited Examination for Commercial General Building Contractors in place of its own Building Contractor trade examination. That route is open to anyone regardless of which state licensed them: sit the NASCLA examination before applying, then file the North Carolina application with the NASCLA pass letter and transcript purchase receipt attached and take the North Carolina Business and Law examination. Everything else still applies in full, including the financial responsibility figure for the limitation requested, the background check, character references and entity registration. An applicant who does not hold the NASCLA credential and comes from a state without a waiver agreement simply takes the North Carolina Building Contractor examination instead: 90 questions, 200 minutes, 70% to pass. North Carolina requires no trade experience for licensure, so out-of-state years do not shorten any step.
The Board confirms NASCLA acceptance on its own contractor FAQ and in 21 NCAC 12A .0303(c), which names the NASCLA examination alongside an origin state examination as the qualifying exam. The FAQ states acceptance for the Building classification; it does not say the NASCLA examination is accepted for the Residential classification. The NASCLA examination is bought and scheduled from NASCLA, not from the Board or PSI, and it is taken before the North Carolina application is filed. Without NASCLA and without a waiver agreement, substitute the North Carolina Building Contractor examination for the waived trade examination below; the Business and Law examination is then part of that classification examination rather than a separate sitting.
At a glance
- Trade exam
- Waived
- Law / code exam
- Required
- Out-of-state hours
- Do not count
What you must already have
- You must have passed a licensing exam in Illinois that the destination considers comparable.NASCLA Accredited Examination for Commercial General Building Contractors, passed before the North Carolina application is filed. The Board asks for the NASCLA pass letter and the transcript purchase receipt to be attached to the application.
- The qualifier is at least 18 years old and possesses good moral character as determined by the Board (G.S. 87-10). North Carolina sets no minimum trade experience or apprenticeship hours for a general contractor license.
What you'll do to get licensed in North Carolina
- 1Law / code exam. Pass a law, rules, or code exam. North Carolina Business and Law examination: 40 questions, 90 minutes, 70% to pass, covering erosion and sedimentation control, licensing, liens, contracts, project management, safety and business practices. Required of applicants who qualify on the NASCLA examination rather than the North Carolina Building Contractor examination..
- 2Trade exam. Pass the destination's trade exam (if applicable). Not required if the NASCLA Accredited Examination has been passed. Otherwise the North Carolina Building Contractor examination applies: 90 questions, 200 minutes, 70% to pass, open book, administered by PSI Services LLC after the Board issues an eligibility letter..
- 3Application fee. Pay the application fee ($75). Nonrefundable application fee set by the limitation requested: $75 for a limited license, $100 for an intermediate license and $125 for an unlimited license (G.S. 87-10(a1); 21 NCAC 12A .0304(a)). The amount shown is the limited-license fee..
- 4Exam fee. Pay the exam fee ($79). $79 per examination, paid to PSI Services LLC when the examination is scheduled. The NASCLA examination itself is bought from NASCLA and is not covered by this fee..
- 5Financial responsibility. Show financial responsibility of at least $17,000. Evidence of financial responsibility for the entity that will hold the license. Current assets must exceed current liabilities by at least $17,000 for a limited license (or total net worth of at least $80,000), $75,000 for an intermediate license, or $150,000 for an unlimited license. Intermediate and unlimited applicants must show the figure in an agreed-upon procedures report on the Board form or an audited financial statement prepared by a CPA or independent accountant. Statements must be no more than twelve months old and conform to GAAP (21 NCAC 12A .0204). The amount shown is the limited-license working capital figure..
- 6Surety bond. Post a surety bond ($175,000) (if applicable). Optional alternative to the working capital or net worth figure: a continuous surety bond of $175,000 for a limited license, $500,000 for an intermediate license or $1,000,000 for an unlimited license, from a surety authorized in North Carolina and rated Superior or Excellent by A.M. Best. Proof is filed with the application and with every annual renewal, and the bond must stay in force until the licensee can show the required working capital (21 NCAC 12A .0204(e))..
- 7Background check. Complete a background check. Criminal background check through the third-party vendor the Board names, paid directly to the vendor. Every qualifier submits to the check, along with the sole proprietor, the president of a corporation, all managers and members of an LLC, or all partners of a partnership (21 NCAC 12A .0303(b))..
- 8Business license. Obtain a business license. The license is issued to a legal entity, so the individual, corporation, LLC or partnership that will contract must be formed and, if organized outside North Carolina, authorized to transact business in the State before the license is issued (G.S. 87-10.1)..
- 9Insurance. Carry the required insurance (if applicable). The Board states there is no insurance or bonding requirement for a general contractor license itself. North Carolina workers compensation law still applies to the business independently of licensure, and owners, lenders and general contractors commonly require general liability coverage by contract..
- 10Continuing education. Complete continuing education. Renewal condition rather than an entry requirement: at least one qualifier on a building, residential or unclassified license must complete eight hours of Board-approved continuing education each year, made up of a two-hour mandatory course and six elective hours, with up to four elective hours carried forward (G.S. 87-10.2)..
- 11Other. Letters of character reference required by 21 NCAC 12A .0303(a)(9) and .0308, certified copies of court records for any criminal convictions of the applicant or its qualifiers, and disclosure of disciplinary history with this or any other licensing agency..
Published fees on this path total $154, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Law / code exam
- Trade exam · if applicable
- Exam fee · $79
Surety bond
A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.
- Surety bond · $175,000 · if applicable
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Business license
Liability insurance
Some states require proof of general liability or workers' compensation coverage at licensing time.
- Insurance · if applicable
Continuing education
Renewals usually need approved CE hours, often on the latest NEC. Reciprocal licensees are rarely exempt.
- Continuing education
How North Carolina licenses general contractors
North Carolina general contractor · “General Contractor, Building classification (Limited, Intermediate or Unlimited)”
Statewide license
Issued by North Carolina Licensing Board for General Contractors
The unlimited tier in North Carolina is the Building classification of the General Contractor license, issued by the North Carolina Licensing Board for General Contractors and required for any single undertaking costing $40,000 or more. The Building classification covers all building construction and demolition, commercial, industrial, institutional and residential alike, plus parking decks, site work and paving, storm drainage, retaining walls, recreational facilities and a list of specialty categories including concrete, masonry, roofing, metal erection, interior construction, swimming pools and asbestos. The Board also issues Highway, Public Utilities and Specialty classifications for work outside building construction, and separate North Carolina boards license the electrical, plumbing, heating and fire sprinkler trades. As with every classification, the license is held by a business and qualified by a named individual who passes the examination, and it carries a monetary limitation: Limited up to $750,000 per project, Intermediate up to $1,500,000, and Unlimited with no project cap, each set by the working capital, net worth or surety bond the applicant can show. North Carolina accepts the NASCLA Accredited Examination for this classification, and it holds examination waiver agreements with a short list of named states, but the Board states it does not have full reciprocity with any state.
Why Illinois has nothing to transfer
Illinois general contractor · “No statewide license; local titles include Chicago General Contractor Class A, B or C”
Licensed by cities and counties
Illinois has no statewide general, commercial or building contractor license and no state board that examines or qualifies builders, so an out-of-state general contractor license has nothing at the state level to transfer into. The State does license pieces of the work: the Department of Financial and Professional Regulation licenses roofing contractors under the Illinois Roofing Industry Licensing Act, in a limited tier for residential buildings of eight units or less and an unlimited tier for residential, commercial and industrial roofs, and also licenses architects, professional and structural engineers, land surveyors and alarm contractors, while the Department of Public Health licenses plumbers, plumbing contractors and irrigation contractors and separate state programs cover elevator and fire sprinkler contractors. Commercial building itself is controlled by home rule municipalities through the building permit, and the City of Chicago's General Contractor license, graded Class A through E by project value, is by far the most consequential credential in the state. A general contractor arriving in Illinois gets licensed or registered in each jurisdiction where they will pull permits, carries the insurance and bonds those jurisdictions require, and makes sure the roofing, plumbing, electrical and mechanical scopes are performed under the correct state or municipal trade licenses.
How local licensing works in Illinois
How it works in Illinois. No Illinois agency issues a general, commercial, building or unlimited contractor license, and there is no Illinois qualifying party or state business-and-law exam for general building work. Home rule municipalities control commercial construction through the permit, and each one writes its own contractor ordinance, so a contractor is licensed or registered separately in every jurisdiction where they build. Where a city does license, the credential is generally based on insurance, financial solvency, entity documents and a fee rather than on a competence exam, and none of the programs reviewed recognizes a general contractor license issued by another state. What genuinely travels into Illinois is a state trade license: roofing under 225 ILCS 335, plumbing under the Department of Public Health, and the state elevator, fire sprinkler and alarm credentials, all of which cities check before they issue a permit.
Chicago. Chicago's General Contractor license is the one credential that shapes commercial work in Illinois. It is required to bid on, undertake, hire or supervise, or control the means and methods of any 'regulated activity' - work requiring a building, sign or demolition (wrecking) permit, a sewer permit, a Department of Public Health permit for sandblasting, grinding or chemical washing, work exempt from permit under Section 402 of the Chicago Construction Codes Administrative Provisions, or work under a stormwater management plan. Licenses go to businesses, including sole proprietorships, in five classes graded by project value, defined as 'the fair market value of materials and labor provided by all contractors and subcontractors as part of all concurrent and consecutive regulated activities at the same site': Class A unlimited value, ordinary or complex demolition, $5 million per occurrence of insurance, $3,500.00; Class B up to $20 million, ordinary or complex demolition, $3 million, $1,800.00; Class C up to $10 million, ordinary demolition, $2 million, $1,300.00; Class D up to $4 million, ordinary demolition, $2 million, $900.00; Class E up to $500,000, no demolition, $1 million, $300.00. The Class B, C and D project limits and the Class C and D insurance figures took effect January 1, 2026, and for Class C and D licenses issued before that date the higher insurance requirement is enforced when the policy on file expires. Commercial general liability must come from an insurer authorized in Illinois and rated B+ or higher by A.M. Best, covering bodily injury, personal injury, property damage and completed operations, with primary plus excess or umbrella policies allowed above $1 million; the full requirements are in Section 4-36-090 of the Municipal Code. The application also needs a statement of financial solvency on the supplied form, proof of authority to do business in Illinois, an Assumed Name Certificate where a trade name is used, and government photo identification for the controlling persons. There is no exam, no experience review and no qualifying party. Continental Testing Services handles applications and renewals by mail for the Department of Buildings; the license is valid one year and is automatically inactivated if the insurance policy lapses. A licensed general contractor's own employees and subcontractors under its supervision and control do not need their own general contractor license, but electrical, plumbing, mason, drain layer, elevator mechanic and board-up work must be done by the holders of those separate City licenses, and anyone contracting directly with the owner needs their own license and must be listed on the permit.
Cook County (unincorporated areas). Every contractor working in unincorporated Cook County registers with the Department of Building and Zoning: $150 per trade to start and $75 per trade annually by December 31, with $1,000,000 general liability naming Cook County Building and Zoning at 69 W. Washington, Suite 2830, Chicago as certificate holder. The owner or a corporate officer files, with the Articles of Incorporation or current Annual Domestic Report. Roofing registrants file the State of Illinois roofing license and demolition registrants a fully approved bond. No exam. Check the site against the county's CookViewer tool first, because much of suburban Cook County is incorporated and licensed by its own village.
Aurora. A General contractor registration costs $200 and consists of the Contractor Licensing Application, a certificate of insurance naming the City of Aurora as primary and non-contributory additional insured with $1,000,000 general aggregate and $500,000 per occurrence, statutory workers' compensation, and Secretary of State registration or a county DBA certificate. Aurora tests only electrical and mechanical contractors, accepting ICC certifications or licenses from named municipalities in place of its own exam; the General category has no test. Elevator, fire suppression, roofing and sign registrations are also $200, and a dumpster or right-of-way obstruction registration needs a $5,000 surety bond. Delinquent permits will block a renewal.
Evanston. General Contractor registration is $150 a year, renewable through the Citizen Portal, with general liability of at least $300,000 per occurrence, bodily injury and property damage of at least $100,000 per occurrence each, and workers' compensation at statutory minimums naming Evanston as certificate holder. Right-of-way work requires $1,000,000 per occurrence with the city as an additional insured. State-regulated contractors submit a copy of the state license. Trade registration is $125.
Joliet. Registration is required before any permit is issued but costs nothing: 'there are no forms or fees for registration, unless you are a Sign Erector or for HVAC Testing.' The requirement is a certificate of insurance naming the City of Joliet, with minimum limits of $250,000 bodily injury per person, $500,000 bodily injury per occurrence and $250,000 property damage per occurrence. Trade credentials are checked separately: the Illinois State Roofer's License for roofing, the Illinois Plumbing Contractor Registration for plumbing, the State of Illinois elevator license, the Illinois sprinkler (FSC) and private alarm licenses, and a municipal electrical or HVAC license from Joliet's accepted list. Concrete work in the right-of-way needs a $10,000 street obstruction bond and demolition a $50,000 wrecking bond. Electrical, plumbing and HVAC contractors file a project-specific Letter of Intent, and all subcontractors must be listed on the permit application.
Rockford. 'General contractors are not required to be licensed.' Rockford controls commercial work through the permit only, and enforces the State roofing license: 'roofing contractors are required to obtain a license from the State of Illinois Department of Professional Regulation.'
Springfield. The Building and Zoning Department publishes electrical and mechanical contractor license and registration applications and no general contractor registration at all; its building permit application asks for the general contractor's name and address but for a license number only on the roofing line. Building and Zoning, 300 South 7th Street, Room 304, (217) 789-2171.
Peoria. Peoria licenses electrical and HVAC contractors individually at $150.00 each, on an open-book ICC exam or a Normal or Pekin license, plus boiler tenders and stationary engineers. Its four Contractor Business Licenses cover parking lot paving, sidewalks and driveways, right-of-way dumpsters and sewer connections, at $25.00 or $60.00 a year with $5,000 or $10,000 license and permit bonds. There is no general building contractor license.
Everywhere else. Every other Illinois city, village and county sets its own rules; many suburban villages register contractors and charge an annual fee, while others require only a permit and proof of insurance. Confirm the requirement, the current fee and the insurance limits with each building department before you bid work there.
- Chicago (Department of Buildings - General Contractor license, Classes A-E)
- Chicago (Department of Buildings - Trade Licensing index for the separate trade contractor licenses)
- Cook County (Department of Building and Zoning - contractor registration, unincorporated areas)
- Aurora (Division of Building and Permits - General contractor registration)
- Evanston (Building and Inspection Services - General Contractor registration)
- Joliet (Building and Inspectional Services - contractor registration, no fee)
- Rockford (Construction and Development Services - general contractors not licensed)
- Springfield (Building and Zoning Department - electrical and mechanical registrations only)
- Peoria (Contractor Business Licenses and Trade Licenses)
- Naperville (City of Naperville - Permits and Licenses)
Common questions
- Do I have to take the North Carolina general contractor exam if I'm licensed in Illinois?
- The trade exam is waived, but North Carolina requires a law or code exam.
- What does it cost to get a North Carolina general contractor license from Illinois?
- Published fees on this path total $154, not counting exam vendor fees or bonds.
- Do my Illinois work hours count in North Carolina?
- No. North Carolina does not credit out-of-state hours on this path.
- Does it work the other way, from North Carolina to Illinois?
- Not necessarily. Reciprocity is directed. Going from North Carolina to Illinois, the mechanism is not applicable.
Sources
- NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
- N.C.G.S. 87-10 - Application for license; examination; certificate; renewal · N.C.G.S. 87-10(a), (a1), (b), (c), (c1), (e) · North Carolina General Assembly · Statute · verified September 17, 2026
- N.C.G.S. 87-15.1 - Reciprocity of licensing · N.C.G.S. 87-15.1 · North Carolina General Assembly · Statute · verified September 17, 2026
- Classifications and limitations - NC Licensing Board for General Contractors · North Carolina Licensing Board for General Contractors · Agency Page · verified September 17, 2026
- FAQ for Contractors - NC Licensing Board for General Contractors · North Carolina Licensing Board for General Contractors · Faq · verified September 17, 2026
- Laws and Regulations Applicable to General Contracting in the State of North Carolina (2026 edition) · 21 NCAC 12A .0202, .0204, .0303, .0304, .0402, .0403, .0404 · North Carolina Licensing Board for General Contractors · Admin Rule · verified September 17, 2026
- License applicants - NC Licensing Board for General Contractors · North Carolina Licensing Board for General Contractors · Agency Page · verified September 17, 2026
- Licensure Application Questions - License Type Selector (online application preview) · North Carolina Licensing Board for General Contractors · Form · verified September 17, 2026
- State of North Carolina Licensing Board for General Contractors - Candidate Information Bulletin · PSI Services LLC for the North Carolina Licensing Board for General Contractors · Other · verified September 17, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.