LicensebyState

Illinois to Tennessee: general contractor license reciprocity

No credit· Start overVerified September 17, 2026· 9 sources

Illinois does not issue a statewide general contractor license, so there is nothing to transfer. Here is Tennessee's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

BC-B or BC license, including the NASCLA Accredited Examination route

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

Tennessee accepts the NASCLA Accredited Examination for Commercial General Building Contractors in place of its own commercial trade examination. The Board's exam information page names the NASCLA national commercial examination as accepted, and the Board's trade exam waiver document matches it to the BC-B Commercial classification, alongside the NASCLA electrical examination which matches to CE. A contractor who already holds the NASCLA credential therefore does not sit the Tennessee BC-B trade examination, but must still pass the Tennessee Business and Law examination and complete the whole application: Qualifying Agent, CPA-reviewed or CPA-audited financial statement, general liability and workers' compensation insurance, Letter of Reference, notarized Contractor's Affidavit and Secretary of State registration. An applicant with neither the NASCLA credential nor a license from a waiver state sits the Tennessee trade examination for the classification requested as well as Business and Law. Out-of-state experience counts either way, because the Board weighs documented experience on projects of the size requested when it sets the classification and the monetary limit.

The trade examination is waived only for an applicant holding the NASCLA Accredited Examination for Commercial General Building Contractors or a license from one of the waiver states listed separately on this page. Everyone else sits the Tennessee examination for the classification requested: BC-B Commercial, BC Building Construction for combined residential, commercial and industrial work, BC-b(sm) for small commercial up to $1,500,000, or BC-C Industrial. The Business and Law examination is never waived on this route. Applications are decided at Board meetings, held at least six times a year, and an interview may be required. The Board does not publish a processing time; the Board office is (615) 741-8307 or (800) 544-7693.

At a glance

Trade exam
Waived
Law / code exam
Required
Out-of-state hours
Count toward eligibility

What you must already have

  • You must have passed a licensing exam in Illinois that the destination considers comparable.The Board's exam information page states that Tennessee accepts NASCLA accredited examinations for Commercial General Building Contractors and for Electrical contractors, and the Board's trade exam waiver document lists a NASCLA row mapping the national commercial and electrical examinations to the Tennessee BC-B and CE classifications. The Board does not map the NASCLA examination to the residential BC-A classification. The NASCLA credential is origin-independent: it is an examination a candidate sits, not a license held in another state, and it does not waive the Tennessee Business and Law examination or any application, financial, insurance or registration requirement.
  • Documented construction experience appropriate to the classification and monetary limit requested. Tennessee sets no fixed minimum number of years, but the Board states it prefers about three years and weighs experience, plant and equipment when it assigns a classification.Experience may be shown through previous employment, volunteer work, internships, education or training, evidenced by letters of recommendation, certificates, diplomas or employment verification, and may have been earned working for other contractors or in another state.
  • The Qualifying Agent who holds the out-of-state credential is an owner, officer or full-time employee of the Tennessee applicant entity; a Qualifying Agent who is not an owner files a Power of Attorney with the application.

What you'll do to get licensed in Tennessee

  1. 1Law / code exam. Pass a law, rules, or code exam. Tennessee Business and Law examination, taken by the Qualifying Agent after the Board approves the application. It is open book, 50 questions, 140 minutes, 73% to pass, and is drawn from the Contractors' Guide to Business, Law and Project Management, Tennessee Edition. It is not waived by any trade exam waiver agreement or by the NASCLA examination; the only contractor license that does not require it is the restricted residential BC-A/r. Examination scores are typically treated by the Board as valid for two years..
  2. 2Trade exam. Pass the destination's trade exam (if applicable). Tennessee BC-B Commercial trade examination, administered after the Board approves the application. It is open book, 100 questions, 300 minutes, 73% to pass. It is required only of applicants who do not hold the NASCLA Accredited Examination for Commercial General Building Contractors and do not come in on a trade exam waiver. The equivalent examinations for the other general classifications are BC Building Construction (100 questions, 300 minutes), BC-b(sm) Small Commercial (70 questions, 200 minutes) and BC-C Industrial (72 questions, 210 minutes)..
  3. 3Application fee. Pay the application fee ($250). Non-refundable application and initial license fee of $250, paid with the Initial New Contractor Application at core.tn.gov (Tenn. Comp. R. & Regs. 0680-01-.20(1)). The license renews every two years at $200, with a $20 per month late penalty for up to twelve months..
  4. 4Exam fee. Pay the exam fee. Examination fee, paid to the testing company rather than to the Board. The Board's rule sets the fee as whatever the administering company charges subject to Board approval, so no amount is published by the Board; Prov began administering Tennessee contractor examinations on July 1, 2026 and publishes the current fee when an examination is booked. One fee is charged for each examination taken..
  5. 5Financial responsibility. Show financial responsibility. Financial statement prepared by a licensed public accountant or CPA on the accountant's letterhead, in the name of the applicant entity, conforming to GAAP and dated no more than twelve months before the application. There is no fixed minimum dollar figure: the monetary limit on the license is set at ten times the lesser of working capital and net worth, supported by experience, so a $150,000 limit needs $15,000 of each and an unlimited license needs $300,000 of each. A reviewed opinion is required for a limit of $3,000,000 or less and an audited opinion above that. A line of credit or a Board Guaranty Agreement may be used to supplement working capital or net worth..
  6. 6Surety bond. Post a surety bond (if applicable). Optional alternative to the CPA-reviewed or CPA-audited financial statement: from July 1, 2026 the Board accepts a Contractors' Surety Bond on the Board's own form in an amount of at least 50% of the monetary limit requested. A bond or Guaranty Agreement may also be required in addition to the financial statement where the statement is primarily cash without fixed assets or where a parent company guarantees the applicant..
  7. 7Insurance. Carry the required insurance ($100,000). Certificate of general liability insurance in the same name as the license, listing the Board as certificate holder. The Board's minimum coverage is set by the monetary limit requested: $100,000 of coverage for a limit up to $500,000, $500,000 of coverage for a limit of $501,001 to $1,500,000, and $1,000,000 of coverage above $1,500,001 to unlimited. Workers' compensation insurance is also required unless the business has no employees and qualifies for an exemption or registers as a Construction Services Provider. The amount shown is the lowest coverage tier..
  8. 8Business license. Obtain a business license. The license is issued to a legal entity in its exact name, so the corporation, LLC or limited partnership must be registered with the Tennessee Secretary of State before the license is issued; an entity formed in another state registers as a foreign entity and files its Certificate of Authority or Articles of Organization. A separate business tax license from the Tennessee Department of Revenue is needed for each city or county the contractor operates in..
  9. 9Other. Letter of Reference on the Board's form from a past client, employer or code official who can speak to construction experience; it may be from outside Tennessee but may not come from a relative, and only one is needed. Also required: a Contractor's Affidavit signed and notarized by the Qualifying Agent, owners, partners, members, main officers and major stockholders, a statement of experience and management information, and a list of equipment. An interview at a Board meeting may be required, for example where the Qualifying Agent is not a majority owner and has been employed less than six months, where the experience shown is thin for the limit requested, or where there is complaint, judgment, bankruptcy or felony history..

Published fees on this path total $250, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Law / code exam
  • Trade exam · if applicable
  • Exam fee

Surety bond

A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.

  • Surety bond · if applicable

Liability insurance

Some states require proof of general liability or workers' compensation coverage at licensing time.

  • Insurance · $100,000

Business registration

If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.

  • Business license

How Tennessee licenses general contractors

Tennessee general contractor · “Contractor license, BC-B Commercial or BC Building Construction classification

Statewide license

Verified September 17, 2026· 8 sources

Issued by Tennessee Board for Licensing Contractors (Department of Commerce and Insurance)

Tennessee licenses contractors at state level, and the unlimited tier is the BC family of building classifications issued by the Board for Licensing Contractors under T.C.A. Title 62, Chapter 6. BC-B Commercial covers buildings for use and occupancy by the general public, including residential buildings of more than four units or more than three stories; BC Building Construction is the full classification covering residential, commercial and industrial work and all 34 building categories; BC-b(sm) is small commercial capped at $1,500,000 and BC-C is industrial. A license is required before bidding on, offering on or contracting for a project of $25,000 or more. The license is held by the business, issued in the entity's exact name and qualified by a named Qualifying Agent who is an owner, officer or full-time employee and who sits the examinations, so an inbound contractor applies as or for the entity that will sign contracts. Every license carries a monetary limit set at ten times the lesser of working capital and net worth on a CPA-reviewed or CPA-audited financial statement, plus documented experience on projects of that size; above $3,000,000 the statement must be audited, and unlimited means showing $300,000 in both working capital and net worth. Tennessee accepts the NASCLA Accredited Examination for Commercial General Building Contractors in place of its own commercial trade examination, and has trade exam waiver agreements with a short list of named states.

Moving to TennesseeLeaving Tennessee

Why Illinois has nothing to transfer

Illinois general contractor · “No statewide license; local titles include Chicago General Contractor Class A, B or C

Licensed by cities and counties

Verified September 17, 2026· 18 sources

Illinois has no statewide general, commercial or building contractor license and no state board that examines or qualifies builders, so an out-of-state general contractor license has nothing at the state level to transfer into. The State does license pieces of the work: the Department of Financial and Professional Regulation licenses roofing contractors under the Illinois Roofing Industry Licensing Act, in a limited tier for residential buildings of eight units or less and an unlimited tier for residential, commercial and industrial roofs, and also licenses architects, professional and structural engineers, land surveyors and alarm contractors, while the Department of Public Health licenses plumbers, plumbing contractors and irrigation contractors and separate state programs cover elevator and fire sprinkler contractors. Commercial building itself is controlled by home rule municipalities through the building permit, and the City of Chicago's General Contractor license, graded Class A through E by project value, is by far the most consequential credential in the state. A general contractor arriving in Illinois gets licensed or registered in each jurisdiction where they will pull permits, carries the insurance and bonds those jurisdictions require, and makes sure the roofing, plumbing, electrical and mechanical scopes are performed under the correct state or municipal trade licenses.

How local licensing works in Illinois

How it works in Illinois. No Illinois agency issues a general, commercial, building or unlimited contractor license, and there is no Illinois qualifying party or state business-and-law exam for general building work. Home rule municipalities control commercial construction through the permit, and each one writes its own contractor ordinance, so a contractor is licensed or registered separately in every jurisdiction where they build. Where a city does license, the credential is generally based on insurance, financial solvency, entity documents and a fee rather than on a competence exam, and none of the programs reviewed recognizes a general contractor license issued by another state. What genuinely travels into Illinois is a state trade license: roofing under 225 ILCS 335, plumbing under the Department of Public Health, and the state elevator, fire sprinkler and alarm credentials, all of which cities check before they issue a permit.

Chicago. Chicago's General Contractor license is the one credential that shapes commercial work in Illinois. It is required to bid on, undertake, hire or supervise, or control the means and methods of any 'regulated activity' - work requiring a building, sign or demolition (wrecking) permit, a sewer permit, a Department of Public Health permit for sandblasting, grinding or chemical washing, work exempt from permit under Section 402 of the Chicago Construction Codes Administrative Provisions, or work under a stormwater management plan. Licenses go to businesses, including sole proprietorships, in five classes graded by project value, defined as 'the fair market value of materials and labor provided by all contractors and subcontractors as part of all concurrent and consecutive regulated activities at the same site': Class A unlimited value, ordinary or complex demolition, $5 million per occurrence of insurance, $3,500.00; Class B up to $20 million, ordinary or complex demolition, $3 million, $1,800.00; Class C up to $10 million, ordinary demolition, $2 million, $1,300.00; Class D up to $4 million, ordinary demolition, $2 million, $900.00; Class E up to $500,000, no demolition, $1 million, $300.00. The Class B, C and D project limits and the Class C and D insurance figures took effect January 1, 2026, and for Class C and D licenses issued before that date the higher insurance requirement is enforced when the policy on file expires. Commercial general liability must come from an insurer authorized in Illinois and rated B+ or higher by A.M. Best, covering bodily injury, personal injury, property damage and completed operations, with primary plus excess or umbrella policies allowed above $1 million; the full requirements are in Section 4-36-090 of the Municipal Code. The application also needs a statement of financial solvency on the supplied form, proof of authority to do business in Illinois, an Assumed Name Certificate where a trade name is used, and government photo identification for the controlling persons. There is no exam, no experience review and no qualifying party. Continental Testing Services handles applications and renewals by mail for the Department of Buildings; the license is valid one year and is automatically inactivated if the insurance policy lapses. A licensed general contractor's own employees and subcontractors under its supervision and control do not need their own general contractor license, but electrical, plumbing, mason, drain layer, elevator mechanic and board-up work must be done by the holders of those separate City licenses, and anyone contracting directly with the owner needs their own license and must be listed on the permit.

Cook County (unincorporated areas). Every contractor working in unincorporated Cook County registers with the Department of Building and Zoning: $150 per trade to start and $75 per trade annually by December 31, with $1,000,000 general liability naming Cook County Building and Zoning at 69 W. Washington, Suite 2830, Chicago as certificate holder. The owner or a corporate officer files, with the Articles of Incorporation or current Annual Domestic Report. Roofing registrants file the State of Illinois roofing license and demolition registrants a fully approved bond. No exam. Check the site against the county's CookViewer tool first, because much of suburban Cook County is incorporated and licensed by its own village.

Aurora. A General contractor registration costs $200 and consists of the Contractor Licensing Application, a certificate of insurance naming the City of Aurora as primary and non-contributory additional insured with $1,000,000 general aggregate and $500,000 per occurrence, statutory workers' compensation, and Secretary of State registration or a county DBA certificate. Aurora tests only electrical and mechanical contractors, accepting ICC certifications or licenses from named municipalities in place of its own exam; the General category has no test. Elevator, fire suppression, roofing and sign registrations are also $200, and a dumpster or right-of-way obstruction registration needs a $5,000 surety bond. Delinquent permits will block a renewal.

Evanston. General Contractor registration is $150 a year, renewable through the Citizen Portal, with general liability of at least $300,000 per occurrence, bodily injury and property damage of at least $100,000 per occurrence each, and workers' compensation at statutory minimums naming Evanston as certificate holder. Right-of-way work requires $1,000,000 per occurrence with the city as an additional insured. State-regulated contractors submit a copy of the state license. Trade registration is $125.

Joliet. Registration is required before any permit is issued but costs nothing: 'there are no forms or fees for registration, unless you are a Sign Erector or for HVAC Testing.' The requirement is a certificate of insurance naming the City of Joliet, with minimum limits of $250,000 bodily injury per person, $500,000 bodily injury per occurrence and $250,000 property damage per occurrence. Trade credentials are checked separately: the Illinois State Roofer's License for roofing, the Illinois Plumbing Contractor Registration for plumbing, the State of Illinois elevator license, the Illinois sprinkler (FSC) and private alarm licenses, and a municipal electrical or HVAC license from Joliet's accepted list. Concrete work in the right-of-way needs a $10,000 street obstruction bond and demolition a $50,000 wrecking bond. Electrical, plumbing and HVAC contractors file a project-specific Letter of Intent, and all subcontractors must be listed on the permit application.

Rockford. 'General contractors are not required to be licensed.' Rockford controls commercial work through the permit only, and enforces the State roofing license: 'roofing contractors are required to obtain a license from the State of Illinois Department of Professional Regulation.'

Springfield. The Building and Zoning Department publishes electrical and mechanical contractor license and registration applications and no general contractor registration at all; its building permit application asks for the general contractor's name and address but for a license number only on the roofing line. Building and Zoning, 300 South 7th Street, Room 304, (217) 789-2171.

Peoria. Peoria licenses electrical and HVAC contractors individually at $150.00 each, on an open-book ICC exam or a Normal or Pekin license, plus boiler tenders and stationary engineers. Its four Contractor Business Licenses cover parking lot paving, sidewalks and driveways, right-of-way dumpsters and sewer connections, at $25.00 or $60.00 a year with $5,000 or $10,000 license and permit bonds. There is no general building contractor license.

Everywhere else. Every other Illinois city, village and county sets its own rules; many suburban villages register contractors and charge an annual fee, while others require only a permit and proof of insurance. Confirm the requirement, the current fee and the insurance limits with each building department before you bid work there.

Moving to IllinoisLeaving Illinois

Common questions

Do I have to take the Tennessee general contractor exam if I'm licensed in Illinois?
The trade exam is waived, but Tennessee requires a law or code exam.
What does it cost to get a Tennessee general contractor license from Illinois?
Published fees on this path total $250, not counting exam vendor fees or bonds.
Do my Illinois work hours count in Tennessee?
Yes. Documented out-of-state experience counts toward Tennessee's eligibility requirements.
Does it work the other way, from Tennessee to Illinois?
Not necessarily. Reciprocity is directed. Going from Tennessee to Illinois, the mechanism is not applicable.

Sources

  1. NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
  2. Tennessee Board for Licensing Contractors - Contractor License Application Package and Instructions · T.C.A. Sections 62-6-111, 62-6-120 · Tennessee Board for Licensing Contractors · Form · verified September 17, 2026
  3. Tennessee Board for Licensing Contractors - Classification Outline · Tennessee Department of Commerce and Insurance · Agency Page · verified September 17, 2026
  4. Tennessee Board for Licensing Contractors - Exam Information · Tennessee Department of Commerce and Insurance · Agency Page · verified September 17, 2026
  5. Tennessee Board for Licensing Contractors - Fees · Tennessee Department of Commerce and Insurance · Agency Page · verified September 17, 2026
  6. Tennessee Board for Licensing Contractors - Get a Contractor License · T.C.A. Title 62, Chapter 6 · Tennessee Department of Commerce and Insurance · Agency Page · verified September 17, 2026
  7. Trade Exam Waiver (Reciprocity) with Tennessee and Request for Contractor License Verification (Rev. 06/2026) · Tennessee Board for Licensing Contractors · Agreement Document · verified September 17, 2026
  8. Tennessee Board for Licensing Contractors - Candidate Information Bulletin · PSI Services LLC for the Tennessee Board for Licensing Contractors · Other · verified September 17, 2026
  9. Rules of the Tennessee Board for Licensing Contractors, Chapter 0680-01 Licensing (November 2025 revision) · Tenn. Comp. R. & Regs. 0680-01-.02, -.12, -.13, -.16, -.20, -.29, -.30, -.32 · Tennessee Secretary of State, Division of Publications · Admin Rule · verified September 17, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related