LicensebyState

Illinois to Tennessee: residential contractor license reciprocity

No credit· Start overVerified September 17, 2026· 9 sources

Illinois does not issue a statewide residential contractor license, so there is nothing to transfer. Here is Tennessee's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

BC-A Residential license by examination (states without a trade exam waiver)

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

A residential contractor arriving from a state that has no trade exam waiver agreement with Tennessee gets no examination credit for the license held elsewhere. The applicant entity files the Initial New Contractor Application online, names a Qualifying Agent, supplies a CPA-reviewed or CPA-audited financial statement, proof of general liability and workers' compensation insurance, a Letter of Reference and a notarized Contractor's Affidavit, and the Qualifying Agent sits both the Tennessee Business and Law examination and the BC-A Residential trade examination. What does carry across state lines is experience: the Board sets the classification and the monetary limit partly on documented experience running projects of the size requested, the application expressly allows experience earned in other states or while working for other contractors, and the Board generally looks for about three years. Tennessee does not accept the NASCLA Accredited Examination at this level; the Board maps it to the commercial BC-B classification. Applications are decided at Board meetings, which are held at least six times a year.

Contractors building single-family homes for $125,000 or less can take the restricted residential route instead: a three-day Board-approved Limited Residential course at a Tennessee community college or vocational school replaces both the BC-A trade examination and the Business and Law examination, and the license is issued as BC-A/r. That license needs a positive working capital and net worth, carries no 10% bid tolerance, and does not allow joint ventures or home inspections; raising the limit or adding a classification later requires the examinations and a reviewed financial statement. Separately, a Home Improvement license rather than a contractor license covers residential improvement contracts of $3,000 to $24,999 in Bradley, Davidson, Hamilton, Haywood, Knox, Marion, Robertson, Rutherford and Shelby counties; that license needs a $10,000 surety bond or equivalent security and no trade exam waiver can be used for it. The Board does not publish a processing time; the Board office is (615) 741-8307 or (800) 544-7693.

At a glance

Trade exam
Required
Law / code exam
Required
Out-of-state hours
Count toward eligibility

What you must already have

  • Documented construction experience appropriate to the classification and monetary limit requested. Tennessee sets no fixed minimum number of years, but the Board states it prefers about three years and weighs experience, plant and equipment when it assigns a classification.Experience may be shown through previous employment, volunteer work, internships, education or training, evidenced by letters of recommendation, certificates, diplomas or employment verification, and may have been earned working for other contractors or in another state.
  • The Qualifying Agent who holds the out-of-state credential is an owner, officer or full-time employee of the Tennessee applicant entity; a Qualifying Agent who is not an owner files a Power of Attorney with the application.

What you'll do to get licensed in Tennessee

  1. 1Trade exam. Pass the destination's trade exam. Tennessee BC-A Residential trade examination, administered after the Board approves the application. It is open book, 100 questions, 300 minutes, 73% to pass..
  2. 2Law / code exam. Pass a law, rules, or code exam. Tennessee Business and Law examination, taken by the Qualifying Agent after the Board approves the application. It is open book, 50 questions, 140 minutes, 73% to pass, and is drawn from the Contractors' Guide to Business, Law and Project Management, Tennessee Edition. It is not waived by any trade exam waiver agreement or by the NASCLA examination; the only contractor license that does not require it is the restricted residential BC-A/r. Examination scores are typically treated by the Board as valid for two years..
  3. 3Application fee. Pay the application fee ($250). Non-refundable application and initial license fee of $250, paid with the Initial New Contractor Application at core.tn.gov (Tenn. Comp. R. & Regs. 0680-01-.20(1)). The license renews every two years at $200, with a $20 per month late penalty for up to twelve months..
  4. 4Exam fee. Pay the exam fee. Examination fee, paid to the testing company rather than to the Board. The Board's rule sets the fee as whatever the administering company charges subject to Board approval, so no amount is published by the Board; Prov began administering Tennessee contractor examinations on July 1, 2026 and publishes the current fee when an examination is booked. One fee is charged for each examination taken..
  5. 5Financial responsibility. Show financial responsibility. Financial statement prepared by a licensed public accountant or CPA on the accountant's letterhead, in the name of the applicant entity, conforming to GAAP and dated no more than twelve months before the application. There is no fixed minimum dollar figure: the monetary limit on the license is set at ten times the lesser of working capital and net worth, supported by experience, so a $150,000 limit needs $15,000 of each and an unlimited license needs $300,000 of each. A reviewed opinion is required for a limit of $3,000,000 or less and an audited opinion above that. A line of credit or a Board Guaranty Agreement may be used to supplement working capital or net worth..
  6. 6Surety bond. Post a surety bond (if applicable). Optional alternative to the CPA-reviewed or CPA-audited financial statement: from July 1, 2026 the Board accepts a Contractors' Surety Bond on the Board's own form in an amount of at least 50% of the monetary limit requested. A bond or Guaranty Agreement may also be required in addition to the financial statement where the statement is primarily cash without fixed assets or where a parent company guarantees the applicant..
  7. 7Insurance. Carry the required insurance ($100,000). Certificate of general liability insurance in the same name as the license, listing the Board as certificate holder. The Board's minimum coverage is set by the monetary limit requested: $100,000 of coverage for a limit up to $500,000, $500,000 of coverage for a limit of $501,001 to $1,500,000, and $1,000,000 of coverage above $1,500,001 to unlimited. Workers' compensation insurance is also required unless the business has no employees and qualifies for an exemption or registers as a Construction Services Provider. The amount shown is the lowest coverage tier..
  8. 8Business license. Obtain a business license. The license is issued to a legal entity in its exact name, so the corporation, LLC or limited partnership must be registered with the Tennessee Secretary of State before the license is issued; an entity formed in another state registers as a foreign entity and files its Certificate of Authority or Articles of Organization. A separate business tax license from the Tennessee Department of Revenue is needed for each city or county the contractor operates in..
  9. 9Other. Letter of Reference on the Board's form from a past client, employer or code official who can speak to construction experience; it may be from outside Tennessee but may not come from a relative, and only one is needed. Also required: a Contractor's Affidavit signed and notarized by the Qualifying Agent, owners, partners, members, main officers and major stockholders, a statement of experience and management information, and a list of equipment. An interview at a Board meeting may be required, for example where the Qualifying Agent is not a majority owner and has been employed less than six months, where the experience shown is thin for the limit requested, or where there is complaint, judgment, bankruptcy or felony history..

Published fees on this path total $250, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Trade exam
  • Law / code exam
  • Exam fee

Surety bond

A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.

  • Surety bond · if applicable

Liability insurance

Some states require proof of general liability or workers' compensation coverage at licensing time.

  • Insurance · $100,000

Business registration

If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.

  • Business license

How Tennessee licenses residential contractors

Tennessee residential contractor · “Contractor license, BC-A Residential classification (BC-A/r restricted under $125,000)

Statewide license

Verified September 17, 2026· 8 sources

Issued by Tennessee Board for Licensing Contractors (Department of Commerce and Insurance)

Tennessee licenses contractors at state level, and the residential tier is the BC-A classification issued by the Board for Licensing Contractors under T.C.A. Title 62, Chapter 6. A contractor license must be in hand before bidding on, offering on or contracting for a project of $25,000 or more, and BC-A covers construction, remodeling, repair or improvement of one-, two-, three- and four-family residences not exceeding three stories, plus accessory structures. The license belongs to the business rather than to the person: it is issued to a sole proprietor, corporation, LLC or partnership in that entity's exact name and is qualified by a named Qualifying Agent, an owner, officer or full-time employee who personally passes the examinations, so an inbound builder applies as or for the entity that will sign contracts. Every license also carries a monetary limit, the largest single contract the licensee may take, set at ten times the lesser of the applicant's working capital and net worth as shown on a CPA-reviewed or CPA-audited financial statement, together with documented experience on projects of that size. Contractors building single-family homes for $125,000 or less may instead hold the restricted BC-A/r license, which replaces both examinations with a three-day Board-approved course at a Tennessee community college or vocational school. Residential improvement work between $3,000 and $24,999 in nine named counties falls under the Board's separate Home Improvement license instead of this one.

Moving to TennesseeLeaving Tennessee

Why Illinois has nothing to transfer

Illinois residential contractor · “No statewide license; local titles include Chicago General Contractor Class D or E and Chicago Home Repair

Licensed by cities and counties

Verified September 17, 2026· 19 sources

Illinois issues no statewide residential contractor, home builder or remodeler license, and no state agency examines or qualifies people who build or remodel houses. What the State does license is narrower and worth knowing: the Department of Financial and Professional Regulation licenses roofing contractors under the Illinois Roofing Industry Licensing Act, where a limited license covers residential properties of eight units or less and an unlimited license covers residential, commercial and industrial roofs, and a municipality or county may not issue a building permit to a roofing contractor without proof of that state license. IDFPR also licenses architects, professional and structural engineers, land surveyors and alarm contractors, and the Department of Public Health licenses plumbers, plumbing contractors and irrigation contractors, but nowhere on IDFPR's list of regulated professions is there a general, residential or building contractor. Everything else is local: Illinois municipalities are home rule units and license or register residential contractors one jurisdiction at a time, with the City of Chicago's General Contractor license by far the most consequential. A builder moving to Illinois therefore has no state license to transfer and no reciprocity to apply for; the practical work is registering in each city or county where they will pull permits, carrying the insurance each one demands, and obtaining the state roofing license if the company will do roofing. Statewide consumer law still applies: the Home Repair and Remodeling Act requires a written contract for any home repair or remodeling job over $1,000 and the "Home Repair: Know Your Consumer Rights" pamphlet on every job.

How local licensing works in Illinois

How it works in Illinois. There is no state license, no state application and no state exam for residential contractors. Each municipality decides who may pull a residential building permit, so a contractor must be licensed or registered separately in every jurisdiction where they build, and a credential from one Illinois city is not valid in the next. Almost all of these local programs are about identity, insurance, bonding and fees rather than trade competence, and none of them reviews or credits a residential contractor license held in another state. Roofing is the exception in the other direction: the State license is mandatory everywhere in Illinois, and cities from Rockford to Joliet to Cook County check it at the permit counter.

Chicago. This is the license that matters. 'A City of Chicago general contractor license is required to perform most types of building construction, alteration, repair, and demolition work within the City of Chicago', and it is needed to bid on, undertake, hire or supervise, or control the means and methods of work requiring a building, sign or demolition permit. Licenses are issued to businesses, including sole proprietorships, in five classes set by project value - the fair market value of materials and labor supplied by all contractors and subcontractors across all concurrent and consecutive work at the same site. The two classes a homebuilder or remodeler usually needs are Class D, capped at $4 million with ordinary demolition and $2 million per occurrence of insurance, at a $900.00 license and renewal fee, and Class E, capped at $500,000 with no demolition and $1 million per occurrence, at $300.00. There is no exam, no experience review and no qualifying party. The application asks for a statement of financial solvency in the format supplied, proof of authority to do business in Illinois (not required for sole proprietors), an Assumed Name Certificate from the County Clerk if a trade name is used, proof of insurance for the class from an insurer authorized in Illinois and rated B+ or better by A.M. Best, and government photo identification for the controlling persons. Continental Testing Services processes the application and renewal by mail for the Department of Buildings; the license runs one year and 'is automatically inactivated if the associated insurance policy expires.' Reinstatement costs $100.00 per year or part year expired.

Chicago, work that does not need a permit. A business that fixes, replaces, alters, modernizes, improves or adds to residential property but does not need a building permit takes a Home Repair license from Business Affairs and Consumer Protection instead: $1,000.00 for a two-year term, with a certificate of insurance of at least $300,000 per occurrence, and the rule that 'Home Repair licensees may not pull building permits.' A general contractor license replaces it - 'a home repair license is not required for a business that holds a General Contractor license', though a general contractor doing residential work must still follow the home repair consumer protection rules, which include a written estimate before work, a written invoice on completion, prior approval before exceeding the estimate, and the license number on contracts, advertisements and vehicles. Acquiring vacant land to build a new home, or renovating more than half of an existing building's floor area, requires a separate Residential Real Estate Developer license.

Cook County (unincorporated areas). 'All contractors performing work in unincorporated Cook County are required to register with the Cook County Department of Building and Zoning.' Registration costs $150 per trade initially and $75 per trade annually, due by December 31, and needs a $1,000,000 general liability certificate naming Cook County Building and Zoning at 69 W. Washington, Suite 2830, Chicago as certificate holder, filed by the owner or a corporate officer with the Articles of Incorporation or the current Annual Domestic Report. Roofing registrants must submit the State of Illinois roofing license and demolition registrants an approved bond. There is no exam. Homeowners who live on the property get 'General' contractor registration free of charge. Use the county's CookViewer tool first to check whether a site is actually unincorporated. Contact [email protected] or 312-603-0512.

Aurora. The Division of Building and Permits registers a General contractor for a $200 fee. The packet is the Contractor Licensing Application, a certificate of insurance naming the City of Aurora as primary and non-contributory additional insured with $1,000,000 general aggregate and $500,000 per occurrence, workers' compensation in compliance with Illinois statute, and proof the business is registered with the Secretary of State or a county DBA certificate. There is no test for the General category - Aurora's municipal testing applies only to electrical and mechanical contractors, who may use ICC certifications or a license from an accepted testing municipality instead. Roofing registration is also $200 and requires the state license, and workers' compensation cannot be replaced by an employee affidavit for roofers. Outstanding or expired permits will block a renewal. Submit to [email protected]; 77 S Broadway, (630) 256-3130.

Evanston. 'All contractors performing work within City limits are required to register with the City, including but not limited to General Contractors, Electrical, Carpentry, Concrete, Excavation, Masonry, Landscaping, Fence, Roofing and Sign contractors.' General Contractor registration is $150 and trade registration $125, both renewable annually through the Citizen Portal. Insurance must be general liability of at least $300,000 per occurrence, bodily injury of at least $100,000 per occurrence, property damage of at least $100,000 per occurrence and workers' compensation at statutory minimums, with Evanston as certificate holder; sole proprietors and partnerships with no employees may file an affidavit in place of workers' compensation, and right-of-way work needs $1,000,000 per occurrence naming the city as additional insured. State-regulated contractors submit a copy of the state license. An owner-occupant of a single-unit residence may act as their own general contractor.

Joliet. 'All contractors performing work within the City of Joliet must have current registration on file prior to permit issuance. There are no forms or fees for registration, unless you are a Sign Erector or for HVAC Testing.' Registration is a certificate of insurance naming the City of Joliet as certificate holder, with minimum limits of $250,000 bodily injury per person, $500,000 bodily injury per occurrence and $250,000 property damage per occurrence, emailed to [email protected]. Roofing needs the Illinois State Roofer's License, plumbing the Illinois Plumbing Contractor Registration, irrigation the state irrigation license, siding a Vinyl Siding Installers certificate, and electrical and HVAC a license from one of the municipalities Joliet accepts. Electrical, plumbing and HVAC contractors also file a project-specific Letter of Intent, and all subcontractors must be listed on the permit application.

Rockford. 'General contractors are not required to be licensed.' Rockford requires a building permit for any structure over 120 square feet that is constructed, altered, enlarged, repaired or moved, and for all roofing work, and notes that 'roofing contractors are required to obtain a license from the State of Illinois Department of Professional Regulation.' Tent erectors and outdoor sign contractors need annual city licenses.

Springfield. The Building and Zoning Department's published list of applications contains electrical and mechanical contractor registrations and licenses and nothing else for contractors - there is no general contractor or home improvement registration. The city's building permit application collects the general contractor's name and address but asks for a license number only on the roofing line. Building and Zoning is at 300 South 7th Street, Room 304, (217) 789-2171.

Peoria. Peoria's Contractor Business Licenses cover only four activities - parking lot paving, sidewalk and driveway work, placing a dumpster or storage unit in the right-of-way, and sewer connections - at $25.00 or $60.00 a year with license and permit bonds of $5,000 or $10,000. Its trade licenses cover electrical and HVAC contractors at $150.00 each, issued to individuals rather than businesses and requiring an open-book ICC exam unless the applicant holds a Normal or Pekin license, plus boiler tender and stationary engineer licenses. There is no general building contractor or residential builder license in Peoria.

Everywhere else. Other Illinois municipalities set their own rules and most of them register rather than license residential builders. Ask the building or development services department of each city, village or county before contracting there, and confirm the current fee and insurance limits before buying coverage, because these are set locally and change independently.

Moving to IllinoisLeaving Illinois

Common questions

Do I have to take the Tennessee residential contractor exam if I'm licensed in Illinois?
Yes. Tennessee requires the trade exam on this path, plus a law or code exam.
What does it cost to get a Tennessee residential contractor license from Illinois?
Published fees on this path total $250, not counting exam vendor fees or bonds.
Do my Illinois work hours count in Tennessee?
Yes. Documented out-of-state experience counts toward Tennessee's eligibility requirements.
Does it work the other way, from Tennessee to Illinois?
Not necessarily. Reciprocity is directed. Going from Tennessee to Illinois, the mechanism is not applicable.

Sources

  1. Tennessee Board for Licensing Contractors - Contractor License Application Package and Instructions · T.C.A. Sections 62-6-111, 62-6-120 · Tennessee Board for Licensing Contractors · Form · verified September 17, 2026
  2. Tennessee Board for Licensing Contractors - Classification Outline · Tennessee Department of Commerce and Insurance · Agency Page · verified September 17, 2026
  3. Tennessee Board for Licensing Contractors - Exam Information · Tennessee Department of Commerce and Insurance · Agency Page · verified September 17, 2026
  4. Tennessee Board for Licensing Contractors - Fees · Tennessee Department of Commerce and Insurance · Agency Page · verified September 17, 2026
  5. Tennessee Board for Licensing Contractors - Get a Contractor License · T.C.A. Title 62, Chapter 6 · Tennessee Department of Commerce and Insurance · Agency Page · verified September 17, 2026
  6. Tennessee Board for Licensing Contractors - Home Improvement License · Tennessee Department of Commerce and Insurance · Agency Page · verified September 17, 2026
  7. Trade Exam Waiver (Reciprocity) with Tennessee and Request for Contractor License Verification (Rev. 06/2026) · Tennessee Board for Licensing Contractors · Agreement Document · verified September 17, 2026
  8. Tennessee Board for Licensing Contractors - Candidate Information Bulletin · PSI Services LLC for the Tennessee Board for Licensing Contractors · Other · verified September 17, 2026
  9. Rules of the Tennessee Board for Licensing Contractors, Chapter 0680-01 Licensing (November 2025 revision) · Tenn. Comp. R. & Regs. 0680-01-.02, -.12, -.13, -.16, -.20, -.29, -.30, -.32 · Tennessee Secretary of State, Division of Publications · Admin Rule · verified September 17, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related