LicensebyState

Illinois to Virginia: general contractor license reciprocity

No credit· Start overVerified September 17, 2026· 16 sources

Illinois does not issue a statewide general contractor license, so there is nothing to transfer. Here is Virginia's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

NASCLA Accredited Examination in place of the Virginia CBC trade exam

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

Virginia accepts the NASCLA Accredited Examination for Commercial General Building Contractors as equivalent to its own Commercial Building (CBC) technical examination, so a qualified individual who already holds the NASCLA credential from any state does not sit the Virginia trade examination. The Board's own words on the license application are that the NASCLA examination is equivalent but the applicant must still provide compatible experience, which means the qualified individual still documents one year of commercial building experience for Class C, three years for Class B or five years for Class A on the Experience Verification Form. Nothing else is waived: the designated employee of a Class A or Class B firm still passes the Advanced, General and Virginia portions of the PSI business examination, the firm still meets the net worth or surety bond requirement for its class, and a member of responsible management or the designated employee still completes eight hours of Board-approved pre-license education. An applicant without the NASCLA credential takes the Virginia CBC technical examination through PSI instead, and out-of-state experience counts toward eligibility either way. Where the application is for CBC or Commercial Improvement (CIC) only, the Contractor Transaction Recovery Fund assessment is not charged and the application fee drops accordingly.

The NASCLA route is an examination credential, not an agreement with any particular state, so it is open to an applicant arriving from anywhere. Applicants from North Carolina should read the agreement row as well. Virginia's universal license recognition program does not cover the Class A, B or C contractor license; its Board for Contractors recognition forms are for individual credentials such as the tradesman license. Two of the Board's other published arrangements are electrical rather than building ones and do not reach the Commercial Building classification: North Carolina Unlimited and Intermediate electrical contractor licenses paired with the Virginia Class A or Class B electrical contractor business license, and an Ohio entry pairing Ohio's Business and Law examination with Virginia's Advanced and General law examinations, which on the Board's agreements document is the second half of the Ohio master electrician entry. Ohio does not license general or residential building contractors at the state level, so an Ohio building contractor applies to Virginia through the route described above.

At a glance

Trade exam
Waived
Law / code exam
Required
Out-of-state hours
Count toward eligibility
Typical processing
About 30 days

What you must already have

  • You must have passed a licensing exam in Illinois that the destination considers comparable.The Board's license application states, in the Commercial Building and Commercial Improvement section, that the NASCLA examination is equivalent but the applicant must still provide compatible experience. The NASCLA examination is a single commercial general building trade examination accepted by participating boards in place of their own; it is not a license and does not waive the business examination, application, financial responsibility or pre-license education requirements.
  • The qualified individual must have one year (Class C), three years (Class B) or five years (Class A) of experience in commercial building contracting, documented on the Experience Verification Form; experience earned in another state counts18VAC50-22-40, -50 and -60 set the ladder by license class.
  • Your Illinois license must be active and in good standing.Certification or Letter of Good Standing showing license number, initial date of licensure, expiration date, means of obtaining licensure and all closed disciplinary actions.
  • You must have no disciplinary action or unresolved complaints on your record.

What you'll do to get licensed in Virginia

  1. 1Application fee. Pay the application fee ($414.50). Class A initial license fee for an application requesting Commercial Building (CBC) or Commercial Improvement (CIC) only, which does not pay the Recovery Fund assessment; the equivalent Class B fee is $394.50 and Class C $249.50. Adding any other classification or specialty restores the $25 Contractor Transaction Recovery Fund assessment and makes the fee $439.50 for Class A, $419.50 for Class B and $274.50 for Class C. All amounts include the technology fee of $7.25 per year and are not refundable..
  2. 2Financial responsibility. Show financial responsibility of at least $45,000. Class A applicants must document at least $45,000 of net worth or equity, and Class B applicants at least $15,000, using the Board's Financial Statement Form with supporting documentation, a CPA-reviewed financial statement or a CPA audit. Class C has no financial requirement..
  3. 3Surety bond. Post a surety bond ($50,000) (if applicable). A $50,000 surety bond on the Board's Surety Bond Form may be filed instead of the net worth documentation for a Class A or Class B license..
  4. 4Law / code exam. Pass a law, rules, or code exam. PSI contractor business examination for the designated employee: the Advanced, General and Virginia portions for Class A and the General and Virginia portions for Class B. It is not waived by the NASCLA credential. Class C licenses have no designated employee..
  5. 5Trade exam. Pass the destination's trade exam (if applicable). Virginia Commercial Building (CBC) technical examination through PSI, required only for a qualified individual who does not hold the NASCLA Accredited Examination; the Board must pre-approve the Experience Verification Form first..
  6. 6Exam fee. Pay the exam fee ($72). Paid directly to PSI: the designated employee's business examination is $40 for one portion, $72 for two portions and $85 for three, and a qualified individual specialty examination is $85. Examination fees are set by the Board's vendor contract and may not exceed $200 per element..
  7. 7Other. Eight hours of Board-approved pre-license education, completed by the designated employee or a member of responsible management for Class A and Class B, or by a member of responsible management for Class C..
  8. 8Other. Certification or Letter of Good Standing from each out-of-state board, prepared by that board, if an out-of-state license is being submitted for experience credit or under an examination agreement. (if applicable).
  9. 9Business license. Obtain a business license. Registration of the business entity with the Virginia State Corporation Commission, including out-of-state businesses, plus compliance with the business license requirements of every county, city and town where the firm performs work..
  10. 10Background check. Complete a background check (if applicable). An original criminal history record dated within 90 days is required from each jurisdiction where any person listed on the application has a felony conviction, or a non-marijuana misdemeanor conviction within the last three years..
  11. 11License fee. Pay the license or certificate fee ($300). Class A renewal every two years: the $270 renewal fee in 18VAC50-22-140 plus the $30 Recovery Fund assessment. Class B renewal is $260 and Class C $220, each plus the $30 assessment. Licenses expire two years from the last day of the month in which they were issued..

Published fees on this path total $786.50, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Surety bond

A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.

  • Surety bond · $50,000 · if applicable

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Law / code exam
  • Trade exam · if applicable

Continuing education

Renewals usually need approved CE hours, often on the latest NEC. Reciprocal licensees are rarely exempt.

  • Other

Business registration

If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.

  • Business license

How Virginia licenses general contractors

Virginia general contractor · “Class A, B or C Contractor, Commercial Building (CBC)

Statewide license

Verified September 17, 2026· 9 sources

Issued by Virginia Board for Contractors (DPOR)

Unlimited and commercial building work in Virginia is a Class A license with the Commercial Building (CBC) classification, issued by the Board for Contractors at DPOR to a business entity rather than to a person. The class letter is purely about money: Class A carries no monetary ceiling and requires $45,000 of documented net worth or equity, Class B is capped at $150,000 per project and $1 million a year and requires $15,000, and Class C is capped at $30,000 per project and $250,000 a year with no financial requirement; a $50,000 surety bond on the Board's form may replace the financial statement for Class A or Class B. The CBC classification covers construction, remodeling, repair, improvement, removal and demolition of commercial, industrial, institutional, governmental and accessory-use buildings, including multi-family housing, and absorbs the commercial improvement, concrete, masonry, roofing, painting, billboard, marine facility, recreational facility and industrialized building specialties for that work; it does not cover electrical, plumbing, HVAC or gas fitting, which are separate classifications, and it does not cover dwellings and townhouses, which are the RBC classification. Heavy civil work is its own Highway/Heavy (H/H) classification. The firm names a qualified individual with five years of commercial building experience for Class A (three for Class B, one for Class C) who passes the CBC technical examination or holds the NASCLA Accredited Examination, and a designated employee who passes the Advanced, General and Virginia portions of the PSI business examination. Eight hours of Board-approved pre-license education are required for every class, and the license runs two years from the last day of the month of issuance.

Moving to VirginiaLeaving Virginia

Why Illinois has nothing to transfer

Illinois general contractor · “No statewide license; local titles include Chicago General Contractor Class A, B or C

Licensed by cities and counties

Verified September 17, 2026· 18 sources

Illinois has no statewide general, commercial or building contractor license and no state board that examines or qualifies builders, so an out-of-state general contractor license has nothing at the state level to transfer into. The State does license pieces of the work: the Department of Financial and Professional Regulation licenses roofing contractors under the Illinois Roofing Industry Licensing Act, in a limited tier for residential buildings of eight units or less and an unlimited tier for residential, commercial and industrial roofs, and also licenses architects, professional and structural engineers, land surveyors and alarm contractors, while the Department of Public Health licenses plumbers, plumbing contractors and irrigation contractors and separate state programs cover elevator and fire sprinkler contractors. Commercial building itself is controlled by home rule municipalities through the building permit, and the City of Chicago's General Contractor license, graded Class A through E by project value, is by far the most consequential credential in the state. A general contractor arriving in Illinois gets licensed or registered in each jurisdiction where they will pull permits, carries the insurance and bonds those jurisdictions require, and makes sure the roofing, plumbing, electrical and mechanical scopes are performed under the correct state or municipal trade licenses.

How local licensing works in Illinois

How it works in Illinois. No Illinois agency issues a general, commercial, building or unlimited contractor license, and there is no Illinois qualifying party or state business-and-law exam for general building work. Home rule municipalities control commercial construction through the permit, and each one writes its own contractor ordinance, so a contractor is licensed or registered separately in every jurisdiction where they build. Where a city does license, the credential is generally based on insurance, financial solvency, entity documents and a fee rather than on a competence exam, and none of the programs reviewed recognizes a general contractor license issued by another state. What genuinely travels into Illinois is a state trade license: roofing under 225 ILCS 335, plumbing under the Department of Public Health, and the state elevator, fire sprinkler and alarm credentials, all of which cities check before they issue a permit.

Chicago. Chicago's General Contractor license is the one credential that shapes commercial work in Illinois. It is required to bid on, undertake, hire or supervise, or control the means and methods of any 'regulated activity' - work requiring a building, sign or demolition (wrecking) permit, a sewer permit, a Department of Public Health permit for sandblasting, grinding or chemical washing, work exempt from permit under Section 402 of the Chicago Construction Codes Administrative Provisions, or work under a stormwater management plan. Licenses go to businesses, including sole proprietorships, in five classes graded by project value, defined as 'the fair market value of materials and labor provided by all contractors and subcontractors as part of all concurrent and consecutive regulated activities at the same site': Class A unlimited value, ordinary or complex demolition, $5 million per occurrence of insurance, $3,500.00; Class B up to $20 million, ordinary or complex demolition, $3 million, $1,800.00; Class C up to $10 million, ordinary demolition, $2 million, $1,300.00; Class D up to $4 million, ordinary demolition, $2 million, $900.00; Class E up to $500,000, no demolition, $1 million, $300.00. The Class B, C and D project limits and the Class C and D insurance figures took effect January 1, 2026, and for Class C and D licenses issued before that date the higher insurance requirement is enforced when the policy on file expires. Commercial general liability must come from an insurer authorized in Illinois and rated B+ or higher by A.M. Best, covering bodily injury, personal injury, property damage and completed operations, with primary plus excess or umbrella policies allowed above $1 million; the full requirements are in Section 4-36-090 of the Municipal Code. The application also needs a statement of financial solvency on the supplied form, proof of authority to do business in Illinois, an Assumed Name Certificate where a trade name is used, and government photo identification for the controlling persons. There is no exam, no experience review and no qualifying party. Continental Testing Services handles applications and renewals by mail for the Department of Buildings; the license is valid one year and is automatically inactivated if the insurance policy lapses. A licensed general contractor's own employees and subcontractors under its supervision and control do not need their own general contractor license, but electrical, plumbing, mason, drain layer, elevator mechanic and board-up work must be done by the holders of those separate City licenses, and anyone contracting directly with the owner needs their own license and must be listed on the permit.

Cook County (unincorporated areas). Every contractor working in unincorporated Cook County registers with the Department of Building and Zoning: $150 per trade to start and $75 per trade annually by December 31, with $1,000,000 general liability naming Cook County Building and Zoning at 69 W. Washington, Suite 2830, Chicago as certificate holder. The owner or a corporate officer files, with the Articles of Incorporation or current Annual Domestic Report. Roofing registrants file the State of Illinois roofing license and demolition registrants a fully approved bond. No exam. Check the site against the county's CookViewer tool first, because much of suburban Cook County is incorporated and licensed by its own village.

Aurora. A General contractor registration costs $200 and consists of the Contractor Licensing Application, a certificate of insurance naming the City of Aurora as primary and non-contributory additional insured with $1,000,000 general aggregate and $500,000 per occurrence, statutory workers' compensation, and Secretary of State registration or a county DBA certificate. Aurora tests only electrical and mechanical contractors, accepting ICC certifications or licenses from named municipalities in place of its own exam; the General category has no test. Elevator, fire suppression, roofing and sign registrations are also $200, and a dumpster or right-of-way obstruction registration needs a $5,000 surety bond. Delinquent permits will block a renewal.

Evanston. General Contractor registration is $150 a year, renewable through the Citizen Portal, with general liability of at least $300,000 per occurrence, bodily injury and property damage of at least $100,000 per occurrence each, and workers' compensation at statutory minimums naming Evanston as certificate holder. Right-of-way work requires $1,000,000 per occurrence with the city as an additional insured. State-regulated contractors submit a copy of the state license. Trade registration is $125.

Joliet. Registration is required before any permit is issued but costs nothing: 'there are no forms or fees for registration, unless you are a Sign Erector or for HVAC Testing.' The requirement is a certificate of insurance naming the City of Joliet, with minimum limits of $250,000 bodily injury per person, $500,000 bodily injury per occurrence and $250,000 property damage per occurrence. Trade credentials are checked separately: the Illinois State Roofer's License for roofing, the Illinois Plumbing Contractor Registration for plumbing, the State of Illinois elevator license, the Illinois sprinkler (FSC) and private alarm licenses, and a municipal electrical or HVAC license from Joliet's accepted list. Concrete work in the right-of-way needs a $10,000 street obstruction bond and demolition a $50,000 wrecking bond. Electrical, plumbing and HVAC contractors file a project-specific Letter of Intent, and all subcontractors must be listed on the permit application.

Rockford. 'General contractors are not required to be licensed.' Rockford controls commercial work through the permit only, and enforces the State roofing license: 'roofing contractors are required to obtain a license from the State of Illinois Department of Professional Regulation.'

Springfield. The Building and Zoning Department publishes electrical and mechanical contractor license and registration applications and no general contractor registration at all; its building permit application asks for the general contractor's name and address but for a license number only on the roofing line. Building and Zoning, 300 South 7th Street, Room 304, (217) 789-2171.

Peoria. Peoria licenses electrical and HVAC contractors individually at $150.00 each, on an open-book ICC exam or a Normal or Pekin license, plus boiler tenders and stationary engineers. Its four Contractor Business Licenses cover parking lot paving, sidewalks and driveways, right-of-way dumpsters and sewer connections, at $25.00 or $60.00 a year with $5,000 or $10,000 license and permit bonds. There is no general building contractor license.

Everywhere else. Every other Illinois city, village and county sets its own rules; many suburban villages register contractors and charge an annual fee, while others require only a permit and proof of insurance. Confirm the requirement, the current fee and the insurance limits with each building department before you bid work there.

Moving to IllinoisLeaving Illinois

Common questions

Do I have to take the Virginia general contractor exam if I'm licensed in Illinois?
The trade exam is waived, but Virginia requires a law or code exam.
What does it cost to get a Virginia general contractor license from Illinois?
Published fees on this path total $786.50, not counting exam vendor fees or bonds.
Do my Illinois work hours count in Virginia?
Yes. Documented out-of-state experience counts toward Virginia's eligibility requirements.
How long does the application take?
The board's published or typical processing time is about 30 days.
Does it work the other way, from Virginia to Illinois?
Not necessarily. Reciprocity is directed. Going from Virginia to Illinois, the mechanism is not applicable.

Sources

  1. NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
  2. 18VAC50-22-100 - Fees · 18VAC50-22-100; Va. Code § 54.1-1119 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
  3. 18VAC50-22-110 - Renewal required · 18VAC50-22-110 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
  4. 18VAC50-22-140 - Renewal fees · 18VAC50-22-140 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
  5. 18VAC50-22-20 - Definitions of license classifications · 18VAC50-22-20 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
  6. 18VAC50-22-40 - Requirements for a Class C license · 18VAC50-22-40 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
  7. 18VAC50-22-50 - Requirements for a Class B license · 18VAC50-22-50 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
  8. 18VAC50-22-60 - Requirements for a Class A license · 18VAC50-22-60 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
  9. 18VAC50-22-70 - Qualifications for licensure by reciprocity or substantial equivalency · 18VAC50-22-70 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
  10. 18VAC50-22-80 - Examination fees · 18VAC50-22-80 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
  11. Va. Code 54.1-1100 - Definitions (Class A, Class B and Class C contractors) · Va. Code § 54.1-1100 · Virginia General Assembly (LIS) · Statute · verified September 17, 2026
  12. Form A501-27LIC - Contractor Licensing Information and Application Instructions (v18, 08/01/2026) · Virginia Board for Contractors (DPOR) · Form · verified September 17, 2026
  13. Form A501-27EXINFO - Board for Contractors, Requirements for Qualified Individuals (v10, 09/01/2025) · Virginia Board for Contractors (DPOR) · Form · verified September 17, 2026
  14. DPOR Board for Contractors - program page (licensing, education and exams, reciprocal agreements) · Virginia Department of Professional and Occupational Regulation · Agency Page · verified September 17, 2026
  15. Virginia Board for Contractors - Reciprocal Licensing/Examination Agreements with Other Jurisdictions · Virginia Board for Contractors (DPOR) · Agreement Document · verified September 17, 2026
  16. DPOR - Universal License Recognition · Va. Code 54.1-204, 54.1-205 · Virginia Department of Professional and Occupational Regulation · Agency Page · verified September 17, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related