LicensebyState

Illinois to Virginia: residential contractor license reciprocity

No credit· Start overVerified September 17, 2026· 16 sources

Illinois does not issue a statewide residential contractor license, so there is nothing to transfer. Here is Virginia's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

Out-of-state residential builders: experience transfers, the RBC exam does not

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

Virginia has no general reciprocity or license-recognition route into the contractor license for residential builders arriving from a state other than North Carolina or Ohio, so the firm applies as a new applicant. What does transfer is experience: the application asks for every contractor license, certification and registration the business, its qualified individual, its designated employee and its responsible management hold outside Virginia, and the Board will review a current out-of-state license as proof of the one, three or five years of residential building experience its class requires. To have it counted, the out-of-state board must supply a Certification or Letter of Good Standing giving the license number, the initial date of licensure, the expiration date, how the license was obtained (examination, reciprocity and so on) and any closed disciplinary actions. The qualified individual still sits the Virginia RBC technical examination with PSI after the Board pre-approves the Experience Verification Form, a Class A or Class B firm's designated employee still sits the business examination, and the eight-hour pre-license education course is still required. The Board's universal license recognition program covers Virginia's individual tradesman and other personal credentials, not the Class A, B or C contractor license, so it is not a route to this license.

The class letter is about contract value, not about houses versus commercial work: a residential builder can hold any of Class A, B or C with the RBC classification, and the fees, net worth and experience figures below change with the class. Virginia also requires the firm to register with the State Corporation Commission and to comply with the local license requirements of every county, city and town where it works. The Board's agreement list also carries an Ohio entry, pairing Ohio's Business and Law examination with Virginia's Advanced and General law examinations, but on the Board's own agreements document that sentence belongs to the Ohio master electrician entry and the arrangement is an electrical one; it does not reach the Class A, B or C building classifications, and Ohio does not license residential or general building contractors at the state level in any case. The Board publishes only the existence of its agreements, not their terms; call (804) 367-8511 or email [email protected] before assuming an out-of-state credential will be accepted.

At a glance

Trade exam
Required
Law / code exam
Required
Out-of-state hours
Count toward eligibility
Typical processing
About 30 days

What you must already have

  • The qualified individual must have one year (Class C), three years (Class B) or five years (Class A) of experience in residential building contracting; experience earned in another state counts18VAC50-22-40, -50 and -60 set the ladder by license class; the Board pre-approves the Experience Verification Form before the qualified individual may sit the RBC technical examination.
  • Your Illinois license must be active and in good standing.Certification or Letter of Good Standing showing license number, initial date of licensure, expiration date, means of obtaining licensure and all closed disciplinary actions.
  • You must have no disciplinary action or unresolved complaints on your record.

What you'll do to get licensed in Virginia

  1. 1Application fee. Pay the application fee ($274.50). Class C initial license fee on the current application form, which combines the $235 fee in 18VAC50-22-100, the $25 Contractor Transaction Recovery Fund assessment and the technology fee of $7.25 per year. The same form charges $419.50 for Class B and $439.50 for Class A. Fees are not refundable..
  2. 2Financial responsibility. Show financial responsibility of at least $15,000 (if applicable). Class B applicants must document at least $15,000 of net worth or equity and Class A applicants at least $45,000, using the Board's Financial Statement Form with supporting documentation, a CPA-reviewed financial statement or a CPA audit. Class C has no financial requirement..
  3. 3Surety bond. Post a surety bond ($50,000) (if applicable). A $50,000 surety bond on the Board's Surety Bond Form may be filed instead of the net worth documentation for a Class A or Class B license..
  4. 4Trade exam. Pass the destination's trade exam. Virginia Residential Building (RBC) technical examination for the qualified individual, administered by PSI after the Board pre-approves the application and Experience Verification Form..
  5. 5Law / code exam. Pass a law, rules, or code exam. PSI contractor business examination for the designated employee of a Class A or Class B firm: the General and Virginia portions for Class B, and the Advanced, General and Virginia portions for Class A. Class C licenses have no designated employee and no business examination..
  6. 6Exam fee. Pay the exam fee ($85). Paid directly to PSI: $85 for a qualified individual specialty examination such as RBC, and for the designated employee's business examination $40 for one portion, $72 for two or $85 for three. Examination fees are set by the Board's vendor contract and may not exceed $200 per element..
  7. 7Other. Eight hours of Board-approved pre-license education, completed by the designated employee or a member of responsible management for Class A and Class B, or by a member of responsible management for Class C. The Board approves the courses but providers set their own prices..
  8. 8Other. Certification or Letter of Good Standing from each out-of-state board, prepared by that board, if an out-of-state license is being submitted for experience credit or under an examination agreement. (if applicable).
  9. 9Business license. Obtain a business license. Registration of the business entity with the Virginia State Corporation Commission, including out-of-state businesses, plus compliance with the business license requirements of every county, city and town where the firm performs work..
  10. 10Background check. Complete a background check (if applicable). An original criminal history record dated within 90 days is required from each jurisdiction where any person listed on the application has a felony conviction, or a non-marijuana misdemeanor conviction within the last three years..
  11. 11License fee. Pay the license or certificate fee ($250). Class C renewal every two years: the $220 renewal fee in 18VAC50-22-140 plus the $30 Recovery Fund assessment. Class B renewal is $260 and Class A $270, each plus the $30 assessment. Licenses expire two years from the last day of the month in which they were issued..

Published fees on this path total $609.50, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Surety bond

A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.

  • Surety bond · $50,000 · if applicable

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Trade exam
  • Law / code exam

Continuing education

Renewals usually need approved CE hours, often on the latest NEC. Reciprocal licensees are rarely exempt.

  • Other

Business registration

If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.

  • Business license

How Virginia licenses residential contractors

Virginia residential contractor · “Class A, B or C Contractor, Residential Building (RBC)

Statewide license

Verified September 17, 2026· 11 sources

Issued by Virginia Board for Contractors (DPOR)

Virginia licenses contractors through the Board for Contractors at the Department of Professional and Occupational Regulation, and the license is issued to a business entity rather than to a person. Every license carries two separate things: a class (A, B or C) that sets the dollar limit on the work, and one or more classifications or specialty designations that set the type of work. Class C covers a single contract or project over $1,000 but under $30,000 and under $250,000 of work in any 12 months; Class B covers $30,000 to under $150,000 per project and $250,000 to under $1 million a year, and requires $15,000 of documented net worth or equity; Class A has no monetary ceiling and requires $45,000 of net worth or equity. A $50,000 surety bond on the Board's form may be filed instead of the financial statement, and Class C has no financial requirement at all. Homes-only work is the Residential Building (RBC) classification, which covers dwellings and townhouses and their accessory structures and folds in concrete, home improvement, masonry, painting, roofing, landscape and swimming pool work on those properties, but never electrical, plumbing, HVAC or gas fitting and never commercial buildings; smaller repair and remodeling firms may instead take the Home Improvement (HIC) specialty. The firm names a qualified individual for each designation, who must have one year (Class C), three years (Class B) or five years (Class A) of experience in that work and must pass the Board's RBC technical examination, and Class A and Class B firms also name a designated employee who passes the PSI business examination. All classes need eight hours of Board-approved pre-license education, and licenses run two years from the last day of the month of issuance.

Moving to VirginiaLeaving Virginia

Why Illinois has nothing to transfer

Illinois residential contractor · “No statewide license; local titles include Chicago General Contractor Class D or E and Chicago Home Repair

Licensed by cities and counties

Verified September 17, 2026· 19 sources

Illinois issues no statewide residential contractor, home builder or remodeler license, and no state agency examines or qualifies people who build or remodel houses. What the State does license is narrower and worth knowing: the Department of Financial and Professional Regulation licenses roofing contractors under the Illinois Roofing Industry Licensing Act, where a limited license covers residential properties of eight units or less and an unlimited license covers residential, commercial and industrial roofs, and a municipality or county may not issue a building permit to a roofing contractor without proof of that state license. IDFPR also licenses architects, professional and structural engineers, land surveyors and alarm contractors, and the Department of Public Health licenses plumbers, plumbing contractors and irrigation contractors, but nowhere on IDFPR's list of regulated professions is there a general, residential or building contractor. Everything else is local: Illinois municipalities are home rule units and license or register residential contractors one jurisdiction at a time, with the City of Chicago's General Contractor license by far the most consequential. A builder moving to Illinois therefore has no state license to transfer and no reciprocity to apply for; the practical work is registering in each city or county where they will pull permits, carrying the insurance each one demands, and obtaining the state roofing license if the company will do roofing. Statewide consumer law still applies: the Home Repair and Remodeling Act requires a written contract for any home repair or remodeling job over $1,000 and the "Home Repair: Know Your Consumer Rights" pamphlet on every job.

How local licensing works in Illinois

How it works in Illinois. There is no state license, no state application and no state exam for residential contractors. Each municipality decides who may pull a residential building permit, so a contractor must be licensed or registered separately in every jurisdiction where they build, and a credential from one Illinois city is not valid in the next. Almost all of these local programs are about identity, insurance, bonding and fees rather than trade competence, and none of them reviews or credits a residential contractor license held in another state. Roofing is the exception in the other direction: the State license is mandatory everywhere in Illinois, and cities from Rockford to Joliet to Cook County check it at the permit counter.

Chicago. This is the license that matters. 'A City of Chicago general contractor license is required to perform most types of building construction, alteration, repair, and demolition work within the City of Chicago', and it is needed to bid on, undertake, hire or supervise, or control the means and methods of work requiring a building, sign or demolition permit. Licenses are issued to businesses, including sole proprietorships, in five classes set by project value - the fair market value of materials and labor supplied by all contractors and subcontractors across all concurrent and consecutive work at the same site. The two classes a homebuilder or remodeler usually needs are Class D, capped at $4 million with ordinary demolition and $2 million per occurrence of insurance, at a $900.00 license and renewal fee, and Class E, capped at $500,000 with no demolition and $1 million per occurrence, at $300.00. There is no exam, no experience review and no qualifying party. The application asks for a statement of financial solvency in the format supplied, proof of authority to do business in Illinois (not required for sole proprietors), an Assumed Name Certificate from the County Clerk if a trade name is used, proof of insurance for the class from an insurer authorized in Illinois and rated B+ or better by A.M. Best, and government photo identification for the controlling persons. Continental Testing Services processes the application and renewal by mail for the Department of Buildings; the license runs one year and 'is automatically inactivated if the associated insurance policy expires.' Reinstatement costs $100.00 per year or part year expired.

Chicago, work that does not need a permit. A business that fixes, replaces, alters, modernizes, improves or adds to residential property but does not need a building permit takes a Home Repair license from Business Affairs and Consumer Protection instead: $1,000.00 for a two-year term, with a certificate of insurance of at least $300,000 per occurrence, and the rule that 'Home Repair licensees may not pull building permits.' A general contractor license replaces it - 'a home repair license is not required for a business that holds a General Contractor license', though a general contractor doing residential work must still follow the home repair consumer protection rules, which include a written estimate before work, a written invoice on completion, prior approval before exceeding the estimate, and the license number on contracts, advertisements and vehicles. Acquiring vacant land to build a new home, or renovating more than half of an existing building's floor area, requires a separate Residential Real Estate Developer license.

Cook County (unincorporated areas). 'All contractors performing work in unincorporated Cook County are required to register with the Cook County Department of Building and Zoning.' Registration costs $150 per trade initially and $75 per trade annually, due by December 31, and needs a $1,000,000 general liability certificate naming Cook County Building and Zoning at 69 W. Washington, Suite 2830, Chicago as certificate holder, filed by the owner or a corporate officer with the Articles of Incorporation or the current Annual Domestic Report. Roofing registrants must submit the State of Illinois roofing license and demolition registrants an approved bond. There is no exam. Homeowners who live on the property get 'General' contractor registration free of charge. Use the county's CookViewer tool first to check whether a site is actually unincorporated. Contact [email protected] or 312-603-0512.

Aurora. The Division of Building and Permits registers a General contractor for a $200 fee. The packet is the Contractor Licensing Application, a certificate of insurance naming the City of Aurora as primary and non-contributory additional insured with $1,000,000 general aggregate and $500,000 per occurrence, workers' compensation in compliance with Illinois statute, and proof the business is registered with the Secretary of State or a county DBA certificate. There is no test for the General category - Aurora's municipal testing applies only to electrical and mechanical contractors, who may use ICC certifications or a license from an accepted testing municipality instead. Roofing registration is also $200 and requires the state license, and workers' compensation cannot be replaced by an employee affidavit for roofers. Outstanding or expired permits will block a renewal. Submit to [email protected]; 77 S Broadway, (630) 256-3130.

Evanston. 'All contractors performing work within City limits are required to register with the City, including but not limited to General Contractors, Electrical, Carpentry, Concrete, Excavation, Masonry, Landscaping, Fence, Roofing and Sign contractors.' General Contractor registration is $150 and trade registration $125, both renewable annually through the Citizen Portal. Insurance must be general liability of at least $300,000 per occurrence, bodily injury of at least $100,000 per occurrence, property damage of at least $100,000 per occurrence and workers' compensation at statutory minimums, with Evanston as certificate holder; sole proprietors and partnerships with no employees may file an affidavit in place of workers' compensation, and right-of-way work needs $1,000,000 per occurrence naming the city as additional insured. State-regulated contractors submit a copy of the state license. An owner-occupant of a single-unit residence may act as their own general contractor.

Joliet. 'All contractors performing work within the City of Joliet must have current registration on file prior to permit issuance. There are no forms or fees for registration, unless you are a Sign Erector or for HVAC Testing.' Registration is a certificate of insurance naming the City of Joliet as certificate holder, with minimum limits of $250,000 bodily injury per person, $500,000 bodily injury per occurrence and $250,000 property damage per occurrence, emailed to [email protected]. Roofing needs the Illinois State Roofer's License, plumbing the Illinois Plumbing Contractor Registration, irrigation the state irrigation license, siding a Vinyl Siding Installers certificate, and electrical and HVAC a license from one of the municipalities Joliet accepts. Electrical, plumbing and HVAC contractors also file a project-specific Letter of Intent, and all subcontractors must be listed on the permit application.

Rockford. 'General contractors are not required to be licensed.' Rockford requires a building permit for any structure over 120 square feet that is constructed, altered, enlarged, repaired or moved, and for all roofing work, and notes that 'roofing contractors are required to obtain a license from the State of Illinois Department of Professional Regulation.' Tent erectors and outdoor sign contractors need annual city licenses.

Springfield. The Building and Zoning Department's published list of applications contains electrical and mechanical contractor registrations and licenses and nothing else for contractors - there is no general contractor or home improvement registration. The city's building permit application collects the general contractor's name and address but asks for a license number only on the roofing line. Building and Zoning is at 300 South 7th Street, Room 304, (217) 789-2171.

Peoria. Peoria's Contractor Business Licenses cover only four activities - parking lot paving, sidewalk and driveway work, placing a dumpster or storage unit in the right-of-way, and sewer connections - at $25.00 or $60.00 a year with license and permit bonds of $5,000 or $10,000. Its trade licenses cover electrical and HVAC contractors at $150.00 each, issued to individuals rather than businesses and requiring an open-book ICC exam unless the applicant holds a Normal or Pekin license, plus boiler tender and stationary engineer licenses. There is no general building contractor or residential builder license in Peoria.

Everywhere else. Other Illinois municipalities set their own rules and most of them register rather than license residential builders. Ask the building or development services department of each city, village or county before contracting there, and confirm the current fee and insurance limits before buying coverage, because these are set locally and change independently.

Moving to IllinoisLeaving Illinois

Common questions

Do I have to take the Virginia residential contractor exam if I'm licensed in Illinois?
Yes. Virginia requires the trade exam on this path, plus a law or code exam.
What does it cost to get a Virginia residential contractor license from Illinois?
Published fees on this path total $609.50, not counting exam vendor fees or bonds.
Do my Illinois work hours count in Virginia?
Yes. Documented out-of-state experience counts toward Virginia's eligibility requirements.
How long does the application take?
The board's published or typical processing time is about 30 days.
Does it work the other way, from Virginia to Illinois?
Not necessarily. Reciprocity is directed. Going from Virginia to Illinois, the mechanism is not applicable.

Sources

  1. 18VAC50-22-100 - Fees · 18VAC50-22-100; Va. Code § 54.1-1119 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
  2. 18VAC50-22-110 - Renewal required · 18VAC50-22-110 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
  3. 18VAC50-22-140 - Renewal fees · 18VAC50-22-140 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
  4. 18VAC50-22-20 - Definitions of license classifications · 18VAC50-22-20 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
  5. 18VAC50-22-30 - Definitions of specialty services · 18VAC50-22-30 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
  6. 18VAC50-22-40 - Requirements for a Class C license · 18VAC50-22-40 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
  7. 18VAC50-22-50 - Requirements for a Class B license · 18VAC50-22-50 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
  8. 18VAC50-22-60 - Requirements for a Class A license · 18VAC50-22-60 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
  9. 18VAC50-22-70 - Qualifications for licensure by reciprocity or substantial equivalency · 18VAC50-22-70 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
  10. 18VAC50-22-80 - Examination fees · 18VAC50-22-80 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
  11. Va. Code 54.1-1100 - Definitions (Class A, Class B and Class C contractors) · Va. Code § 54.1-1100 · Virginia General Assembly (LIS) · Statute · verified September 17, 2026
  12. Form A501-27LIC - Contractor Licensing Information and Application Instructions (v18, 08/01/2026) · Virginia Board for Contractors (DPOR) · Form · verified September 17, 2026
  13. Form A501-27EXINFO - Board for Contractors, Requirements for Qualified Individuals (v10, 09/01/2025) · Virginia Board for Contractors (DPOR) · Form · verified September 17, 2026
  14. DPOR Board for Contractors - program page (licensing, education and exams, reciprocal agreements) · Virginia Department of Professional and Occupational Regulation · Agency Page · verified September 17, 2026
  15. Virginia Board for Contractors - Reciprocal Licensing/Examination Agreements with Other Jurisdictions · Virginia Board for Contractors (DPOR) · Agreement Document · verified September 17, 2026
  16. DPOR - Universal License Recognition · Va. Code 54.1-204, 54.1-205 · Virginia Department of Professional and Occupational Regulation · Agency Page · verified September 17, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related