LicensebyState

Kansas to Oregon: general contractor license reciprocity

No credit· Start overVerified September 17, 2026· 13 sources

Kansas does not issue a statewide general contractor license, so there is nothing to transfer. Here is Oregon's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

CCB application with the NASCLA examination in place of the pre-license training (every state)

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

Oregon has no contractor reciprocity at the commercial level either. OAR 812-006-0300(6) states that there are no reciprocal agreements with other states or with organizations that test contractors, and ORS chapter 701 contains no provision recognizing a license issued elsewhere, so an out-of-state general contractor license buys nothing on its own. The Board does accept the NASCLA Accredited Examination for Commercial General Building Contractors: under OAR 812-006-0310 an RMI who has passed it satisfies the 16-hour pre-license training requirement, regardless of when the exam was taken, and needs only the Oregon contractor test, with the pass established by the RMI's entry in the NASCLA National Examination Database rather than by a transcript from the candidate. An RMI without it completes 16 hours of approved training and then takes the same Oregon test, which is the state's only examination: 80 scored questions in 180 minutes, 70 percent to pass, open book on Oregon laws, rules and business practices, and never waived. Out-of-state work does count in one place at this level: the eight combined years for Level 1 or four for Level 2 are certified by the contractor for its key employees and the statute nowhere requires the experience to have been earned in Oregon, so years spent as a licensed contractor, journeyman, foreperson or supervisor in another state count toward the endorsement. The remaining steps are the same for every applicant: registration with the Oregon Secretary of State, an $80,000 or $25,000 commercial bond and $2 million or $1 million of aggregate liability insurance on the Board's own forms according to the level chosen, workers' compensation cover if the business has employees, and the $400 application fee.

Level 1 and Level 2 are licensed to perform identical work, so the choice between them is a choice about experience, bond size, insurance limit and continuing education rather than about scope. The key-employee experience is certified by the contractor on the application and again at renewal; the Board publishes no verification form for it and no list of documents it will accept, so confirm with the licensing call center on 503-378-4621 what evidence it wants for years worked outside Oregon. Two other RMI routes exist but rarely help an inbound contractor: continuous association with an Oregon-licensed business from before 1 July 2000 with no lapse over 24 months, and a sole proprietor exemption under Oregon Laws 2018 chapter 46, which in any case only produces a residential endorsement. OAR 812-003-0265 separately gives the spouse of an active-duty servicemember stationed in Oregon a temporary authorization of up to two years, available for both commercial general levels, on a current out-of-state general, commercial or residential contractor license in good standing, with competency shown by the NASCLA examination, the Oregon examination, or eight years of licensed contracting in another state, plus three hours of Board education. The license must be applied for within two years of passing the Oregon test, and the Board charges no separate fee for the endorsement on a new application.

At a glance

Trade exam
Waived
Law / code exam
Required
Out-of-state hours
Count toward eligibility
Typical processing
About 42 days

What you must already have

  • You must have passed a licensing exam in Kansas that the destination considers comparable.OAR 812-006-0310 accepts the pass whenever it was earned and proves it by the RMI's name appearing in the NASCLA National Examination Database. The NASCLA examination is an exam credential rather than a license or an interstate agreement, so it is open to a candidate from any state and confers no advantage tied to where the applicant is licensed. It does not waive the Oregon contractor test, the key-employee experience, the bond, the insurance or the fee. An applicant without it takes 16 hours of approved training instead.
  • For Commercial General Contractor Level 1, one or more key employees with a combined total of at least eight years of construction experience; for Level 2, a combined total of at least four years. A key employee is an owner or employee who is a corporate officer, manager, superintendent, foreperson or lead person.The qualifying years are time worked as a licensed contractor, journeyman, foreperson or supervisor or as any other employee engaged in construction work for a licensed contractor, and ORS 701.050 does not confine that to Oregon, so out-of-state years count. Completion of an apprenticeship substitutes for up to three years, a bachelor's degree in a construction-related field for up to three, a bachelor's or master's degree in business, finance or economics for up to two, and an associate's degree in construction or building management for one. The contractor certifies the total on the application and at every renewal.
  • The business must designate at least one Responsible Managing Individual: an owner or an employee who exercises management or supervisory authority over the construction activities of the business. An RMI who is not an owner may serve only one licensee at a time, and a business that loses its RMI must appoint a replacement immediately or a temporary RMI for no more than 14 days, or the license is suspended.
  • You must have no disciplinary action or unresolved complaints on your record.ORS 701.098(1)(d). The application also requires five years of construction-related court judgments, administrative orders, pending complaints, convictions and indictments from any state, and unsatisfied construction debt blocks a new license for the business owners and for the RMI until it is paid.

What you'll do to get licensed in Oregon

  1. 1Other. At least 16 hours of pre-license training on business practices and law from a CCB-approved education provider, taken by the RMI. It is required of every applicant except an RMI who has passed the NASCLA Accredited Examination for Commercial General Building Contractors, and except the narrow RMI route based on continuous Oregon licensure from before July 2000. Providers set their own prices, so the Board publishes no figure; the approved provider list is on the CCB site and the education team can be reached on 503-934-2227. (if applicable).
  2. 2Law / code exam. Pass a law, rules, or code exam. The Oregon contractor test, administered by PSI at test centers in Oregon and other states or by remote proctor: 80 scored questions in 180 minutes, plus 8 unscored questions and 20 minutes, with 70 percent needed to pass. It is open book against the NASCLA Contractors Guide to Business, Law and Project Management for Oregon Construction Contractors, 2nd edition, which may be highlighted, tabbed and annotated beforehand. The subjects are Oregon contractor laws and regulations, business structure, employees, subcontractors, contracts, lien law, bidding and estimating, project management, building codes, jobsite safety, environmental factors, exterior shell, financial management and tax basics. There is no separate commercial or trade examination. A failed test may be retaken without limit, though not the same version on consecutive attempts, and the license application must follow within two years of the pass..
  3. 3Exam fee. Pay the exam fee ($60). PSI examination fee, payable when the test is scheduled. It covers first-time and repeat takers and stays valid for one year from the date of payment..
  4. 4Application fee. Pay the application fee ($400). CCB license application fee for a new license, set at $400 for applications received from 1 July 2025. It covers the two-year license; renewal is a further $400 every two years, and changing or adding an endorsement later costs $20. Application fees are not refunded. A licensee who is a sole proprietor or general partner on active duty in the armed forces does not pay a renewal fee falling due during that service..
  5. 5Surety bond. Post a surety bond ($25,000). A commercial surety bond sized to the level chosen: $25,000 for Commercial General Contractor Level 2 and $80,000 for Level 1. The Board accepts only its own CCB Commercial Surety Bond form, signed by an authorized agent of the surety or an attorney-in-fact, bearing a bond number, and filed within 60 days of the date the surety executed it. A commercial bond answers only for small and large commercial work, so a contractor also taking a residential endorsement posts a second, residential bond. Commercial Specialty Level 1 is $55,000 and Level 2 $25,000..
  6. 6Insurance. Carry the required insurance ($1,000,000). General liability insurance sized to the level chosen: at least $1 million aggregate for Commercial General Contractor Level 2 and at least $2 million aggregate for Level 1, covering products and completed operations, with the certificate naming Construction Contractors Board, PO Box 14140, Salem, OR 97309 as certificate holder. Proof is filed with the application and again at every renewal. A contractor holding both a commercial and a residential endorsement carries a single policy at the higher of the two amounts..
  7. 7Insurance. Carry the required insurance (if applicable). Workers' compensation coverage, required of any business that is non-exempt, meaning it has employees. A sole proprietor with no employees, and a business in which every owner, officer or member is a family member, may file as exempt; the Board defines family as parents, spouses, sisters, brothers, daughters, sons, daughters-in-law, sons-in-law and grandchildren. A non-exempt applicant supplies its carrier, policy number, Workers' Compensation Division compliance number and employer tax identification numbers, and any change between exempt and non-exempt status must be reported to the Board within 10 days..
  8. 8Business license. Obtain a business license. A business entity that is required to register with the Oregon Secretary of State's Corporation Division must be registered, active and in good standing before the license issues, and every assumed business name used by the applicant must be registered as that entity's assumed business name. An out-of-state entity registers in Oregon in the same way. A joint venture is licensed and endorsed for bidding purposes if a named partner or joint venturer holds the license and endorsement..
  9. 9Background check. Complete a background check. The RMI clears a background check after the application is filed. The application itself asks the business and its owners and officers to disclose, for the five years before the application and from any state, unsatisfied construction-related court judgments and administrative orders, pending complaints alleging money owed, and judgments of conviction or indictments for the crimes listed in ORS 701.098, along with unpaid workers' compensation penalties and unpaid employee wages. Unsatisfied construction debt keeps both the owners and the RMI from obtaining a new CCB license until it is paid..
  10. 10Surety bond. Post a surety bond ($30,000) (if applicable). A separate $30,000 public works bond, filed with the Board before work starts on a qualifying public works project over $100,000. It is not part of the licensing application, but it is the second bond most commercial general contractors in Oregon end up posting. Disadvantaged, minority, women-owned, service-disabled veteran and emerging small businesses certified by the state may apply for an exemption..
  11. 11Continuing education. Complete continuing education (if applicable). Not required to obtain the license. Each two-year license period a Commercial General Contractor Level 2 must certify that one or more key employees completed at least 32 hours of continuing education; a Level 1 contractor's requirement scales with the lowest number of key employees it had during the period, at 16 hours for one, 32 for two, 48 for three, 64 for four and 80 for five or more. Hours count only if the key employee was employed by the contractor when the course was taken, and hours credited at one renewal cannot be reused at the next. Contractors who also hold certain Oregon licenses, including architect, engineer, electrician and plumber, are exempt..
  12. 12Other. A contractor whose Oregon work will include boiler, electrical, elevator or plumbing installation also needs the matching Building Codes Division contractor license, and OAR 918-030-0015 requires an active CCB license before the division will issue or renew one. The CCB license comes first, and it does not replace the division license..

Published fees on this path total $460, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Other · if applicable
  • Law / code exam
  • Exam fee · $60

Surety bond

A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.

  • Surety bond · $25,000
  • Surety bond · $30,000 · if applicable

Liability insurance

Some states require proof of general liability or workers' compensation coverage at licensing time.

  • Insurance · $1,000,000
  • Insurance · if applicable

Business registration

If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.

  • Business license

Continuing education

Renewals usually need approved CE hours, often on the latest NEC. Reciprocal licensees are rarely exempt.

  • Continuing education · if applicable

How Oregon licenses general contractors

Oregon general contractor · “Construction contractor license with the Commercial General Contractor Level 1 or Level 2 (CGC1/CGC2) endorsement”

Statewide license

Verified September 17, 2026· 6 sources

Issued by Oregon Construction Contractors Board (CCB)

Oregon's unlimited tier is the Commercial General Contractor endorsement, carried on the same single construction contractor license the Construction Contractors Board issues to everyone: ORS 701.021 requires a current CCB license plus the endorsement that matches the work, and the endorsement is what sets the bond and the insurance. A Commercial General Contractor may bid or perform work involving an unlimited number of unrelated building trades on small or large commercial structures, and it comes in two levels that are allowed to do exactly the same work and differ only in what stands behind them. Level 1 requires one or more key employees with a combined total of at least eight years of construction experience, an $80,000 commercial bond and general liability insurance of at least $2 million aggregate; Level 2 requires four combined years, a $25,000 commercial bond and at least $1 million aggregate. A key employee is an owner or employee who is a corporate officer, manager, superintendent, foreperson or lead person, the qualifying years are time as a licensed contractor, journeyman, foreperson or supervisor or as another employee doing construction work for a licensed contractor, and an apprenticeship or a construction-related bachelor's degree substitutes for up to three years, a bachelor's or master's in business, finance or economics for up to two, and an associate's degree in construction or building management for one. Alongside it sit Commercial Specialty Contractor Level 1 and Level 2 for one or two unrelated trades and Commercial Developer; a license may carry one commercial endorsement, one residential endorsement, or one of each, and a contractor holding both posts two bonds and carries one liability policy at the higher amount. As at every level the license belongs to the business and must at all times have at least one Responsible Managing Individual, an owner or employee with management or supervisory authority over its construction activities, who has completed 16 hours of CCB-approved pre-license training and passed the Oregon contractor test. Oregon imposes no net worth, working capital or financial statement test; the key-employee experience certification, the bond and the insurance are the only financial gates.

Moving to OregonLeaving Oregon

Why Kansas has nothing to transfer

Kansas general contractor · “General contractor license (Class A) or building contractor license (Class B)”

Licensed by cities and counties

Verified September 17, 2026· 18 sources

Issued by No state authority; cities and counties license general and building contractors

Kansas has no statewide general, commercial or unlimited building contractor license, no state contractor board and no state licensing exam, so there is nothing at state level for an out-of-state general contractor's license to transfer into and no NASCLA route to take. What the legislature provides instead is a shared test. K.S.A. 12-1556 designates standard examinations for general, building and residential contractors; K.S.A. 12-1557 tells every Kansas city or county that licenses builders to use that examination, to set the passing score at 75 percent, to charge a uniform examination fee and to accept the resulting certificate of competency 'without additional examination' anywhere else in the state; and K.S.A. 12-1558 lets a jurisdiction use a different examination, at the price that the resulting license is good only inside that jurisdiction unless the two political subdivisions have a reciprocal agreement. The examinations are the ICC Kansas contractor series, exam 550 for the Class A general building contractor with no height limit and 551 for the Class B building contractor up to three stories. Licenses are held by the company and qualified by a named individual, so a commercial contractor arriving in Kansas is really doing two things: getting one person through the Kansas standard examination, and then licensing the company in each jurisdiction where it will pull permits. Those jurisdictions differ in what else they want - Johnson County asks for $1,000,000 of liability cover and eight hours of continuing education a year, Wichita and Sedgwick County for $300,000 and a two-year license costing $1,000 at Class A, Lawrence for six years of documented Class A experience - and the Unified Government of Wyandotte County does not license general contractors for competency at all, only for occupational tax. Roofing is the one contractor credential Kansas itself issues, through the Attorney General's roofing registration, and it has a carve-out for a general contractor whose roofing work is not more than half of a project's cost.

How local licensing works in Kansas

How local licensing works. Contractor licensing in Kansas is entirely local, but it runs on a statewide examination. K.S.A. 12-1556 designates the standard examinations for general, building and residential contractors; these are published today by the International Code Council as the Kansas contractor series, exam ID 550 for the Standard General Building Contractor, 551 for the Standard Building Contractor and 552 for the Standard Residential Building Contractor. K.S.A. 12-1557 requires a licensing city or county to use that examination and 'shall not be allowed to ask further questions not designated on such examination', to prescribe a 75 percent passing score, and to honor the resulting certificate of competency 'without additional examination' - the certificate, in the statute's words, 'shall be valid proof of competency for licensure... in any county or city of the state which requires licensure of such contractors', and the licenses issued on it 'shall be valid in any other county or city which requires examination and licensure of such contractors.' K.S.A. 12-1558 permits a jurisdiction to use an alternative examination, but then the license works only inside that jurisdiction 'except when authorized by reciprocal agreement between the political subdivisions involved.' The plain consequence for someone arriving from another state: pass the Kansas standard examination once and it travels across Kansas; a license from Missouri, Oklahoma, Nebraska or anywhere else travels nowhere. No jurisdiction below publishes any credit for an out-of-state contractor license.

Johnson County (Overland Park, Olathe, Lenexa, Leawood, Shawnee and the rest of the county). Johnson County Contractor Licensing issues eleven license types for the whole county, and its application sets out the reach: building permits come from Johnson County Building Codes in the unincorporated county and from the city everywhere else, but 'when a building permit is issued in the company/firm's name, the company/firm must comply with Johnson County Contractor Licensing Regulations (Resolution 076-24) and be subject to the jurisdiction of the Johnson County Contractor Licensing Review Board.' Class A 'entitles the company to construct, remodel, repair, and demolish any structure... regardless of occupancy or height', and Class B covers 'all structures not exceeding three (3) stories in height'; neither entitles the holder to perform HVAC, plumbing, electrical or fire protection work, which need the separate DM, DP, DE and DF or DFA licenses, and there are further specialty classes for roofing, swimming pools and wood framing. Qualification is ICC exam 550 or KGA for Class A and 551 or KGB for Class B at 75 percent or better, or a Bachelor of Science or higher in architecture, relevant engineering, construction science or construction management from an ABET or ACCE accredited program; ICC National exams may also be considered at 75 percent where the outline content mirrors the Kansas exam. The company designates a qualifying individual working at least 30 hours a week, and every qualifying individual needs eight hours of approved continuing education a year for the company to renew. Insurance is $1,000,000 combined single limit per occurrence plus $1,000,000 completed operations, with the county as certificate holder, and workers' compensation with $100,000 employer's liability or a notarized waiver. Fees: $100 application plus $225 per license type, so $325 for one type and $550 for two, renewing at $225 per type with a $75 late fee from February 1. Licenses last one year and new applications must be filed on paper. 111 S. Cherry Street, Suite 1000, Olathe; 913-715-2233 option 1.

Wichita and Sedgwick County. The Metropolitan Area Building and Construction Department licenses contractors for unincorporated Sedgwick County, the City of Wichita and the small cities in its jurisdiction, including Andale, Bentley, Cheney, Clearwater, Colwich, Garden Plain, Goddard, Maize, Mulvane and Valley Center, where the MABCD license must be active but permitting starts with the city (and Valley Center requires its own license as well). MABCD states flatly that it 'does not reciprocate with other jurisdictions.' The unlimited class is Class A and the three-story class is Class B; general contractor licenses run two years and expire December 31 of each even year, with a penalty-free grace period to January 31. The qualified person files 'a copy of Kansas Standard ICC exam' at 75 percent or better, with an ICC test release form if the exam was taken outside Kansas, and must be an owner or full-time employee authorized in writing by the owners to bind the company in contracts. Two-year fees are $1,000 Class A, $600 Class B, $450 Class C Residential and $360 for Class D Residential Maintenance and the specialty classes, plus $50 for a new application; late renewal costs 25 percent extra in February and 50 percent after. Also required: liability insurance of at least $300,000 naming MABCD as certificate holder in the exact company name from an insurer accepted by the State of Kansas, workers' compensation and auto insurance certificates or notarized waivers for each, and a Kansas Certificate of Good Standing unless the applicant is a sole proprietor. Review takes up to two weeks. 271 W. 3rd, Suite 101, Wichita; 316-660-1840, by appointment.

Kansas City, Kansas and Wyandotte County. The Unified Government is the outlier among the large Kansas jurisdictions: it runs no general contractor competency license. 'General contractors and subcontractors are required to obtain a city occupational tax license (Business License) if working within Wyandotte County', handled by Business Licensing on (913) 573-8780, while 'trade masters are required to carry a master's license with Building Inspections', earned on a standard examination delivered through Prometric and approved by the Chief Building Inspector. A commercial builder therefore pays the occupational tax, pulls permits, and relies on separately licensed electrical, mechanical and plumbing masters for the licensed trades. Building Inspection and the License Department share the Neighborhood Resource Center at 4601 State Avenue, Indian Springs Marketplace; Building Inspection (913) 573-8620.

Topeka. Development Services issues every contractor and trade license in the city and requires all trades to be licensed before pulling permits. Class A is the Kansas Standard General Building Contractor with unlimited stories, ICC exam 550; Class B is the Kansas Standard Building Contractor up to three stories, ICC exam 551; Class C is residential only, ICC exam 552. All examinations require 75 percent or better, and results from Prometric, Thomson-Prometric, Experior, NAI-Block and Block are also accepted at that score subject to review. An official transcript for at least 30 hours of coursework from an accredited school in construction science, engineering or architecture is an alternative, provided the degree holder is the qualifying party and works for the company full time. The filing includes the application, the exam or educational certification, a qualifying party verification form, the Renovate Right form, a general liability certificate and a workers' compensation certificate or notarized affidavit naming City of Topeka Development Services, 620 SE Madison Unit 6, as certificate holder; allow up to ten days. Class A, B and C licensees need eight hours of continuing education a year, and every license renews by December 14. Fees are never prorated and no refunds are issued. The city does not publish its general contractor license fee online - call Development Services on 785-368-3905 for the current amount.

Lawrence. A Lawrence contractor license is required before undertaking any work in the city for which a building permit is required. Class A, General Contractor entitles the licensee to perform any permitted work in the city, including the Class D specialties; Class B, Building Contractor covers any structure not exceeding three stories from grade, plus non-structural remodeling, tenant finishes and repairs on all buildings. Class A needs six years of qualifying experience performing Class A work, or a valid Class B license plus ten years as a licensed Class B contractor; Class B needs four years, or a Class C license plus six years as a licensed Class C. Experience must be verified by a licensed contractor, building official, architect or engineer. Competency comes from a certificate of competency issued by a nationally recognized testing institution of the kind contemplated by K.S.A. 12-1556, from a bachelor's degree in engineering, architecture or construction science, or from 'an equivalent Contractor License from another jurisdiction with whom the City has an existing and valid reciprocity agreement' - a route the ordinance allows but for which it names no partner, so confirm with Building Inspections before counting on it. Fees are $75 for each applicant and each qualifying party plus a $75 annual license fee. Liability insurance must be at least $1,000,000 per occurrence including completed operations, from a Kansas-licensed insurer, alongside workers' compensation. The Building Official decides within 30 days, and an applicant whose license was revoked anywhere in the past five years is refused. The license is company-held; a change of name, ownership or qualifying party voids it and a new license must be obtained. Renewal takes eight hours of construction-related continuing education a year per qualifying party, payment of all delinquent city fees, and closing or extending inactive open permits. Class E licenses for mechanical, plumbing, electrical and fireplace work are separate and are not covered by a Class A license. (785) 832-7700.

Everywhere else, and what does travel. Any other Kansas city or county may license builders on its own terms. The credential that actually moves around Kansas is the certificate of competency from the designated standard examination, not a license from another state and not the NASCLA Accredited Examination, which no Kansas agency participates in because Kansas has no state contractor agency. Before bidding, identify the building department with jurisdiction over the site and ask what it licenses. Statewide, register with the Kansas Attorney General before providing roofing services for a fee unless the project qualifies for the exempt general contractor carve-out - which requires, among other things, that roofing be no more than 50 percent of the total project cost and that the contractor not sell door to door - and use properly licensed masters for electrical, plumbing and mechanical work.

Moving to KansasLeaving Kansas

Common questions

Do I have to take the Oregon general contractor exam if I'm licensed in Kansas?
The trade exam is waived, but Oregon requires a law or code exam.
What does it cost to get a Oregon general contractor license from Kansas?
Published fees on this path total $460, not counting exam vendor fees or bonds.
Do my Kansas work hours count in Oregon?
Yes. Documented out-of-state experience counts toward Oregon's eligibility requirements.
How long does the application take?
The board's published or typical processing time is about 42 days.
Does it work the other way, from Oregon to Kansas?
Not necessarily. Reciprocity is directed. Going from Oregon to Kansas, the mechanism is not applicable.

Sources

  1. NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
  2. CCB Frequently Asked Questions (application), updated 3/2026 · Oregon Construction Contractors Board · Faq · verified September 17, 2026
  3. Construction Contractors Board - Continuing education · Oregon Construction Contractors Board · Agency Page · verified September 17, 2026
  4. CCB License Endorsements chart (11/2024) · Oregon Construction Contractors Board · Other · verified September 17, 2026
  5. Oregon Construction Contractors Board Examination Candidate Information Bulletin (PSI) · Oregon Construction Contractors Board / PSI Services LLC · Other · verified September 17, 2026
  6. Construction Contractors Board - How to get a CCB license (9 steps) · Oregon Construction Contractors Board · Agency Page · verified September 17, 2026
  7. CCB Sole Proprietorship License Application · Oregon Construction Contractors Board · Form · verified September 17, 2026
  8. Construction Contractors Board - Licensing (bonds, insurance, public works bond) · Oregon Construction Contractors Board · Agency Page · verified September 17, 2026
  9. OAR chapter 812, division 3 - Construction Contractors Board licensing · OAR 812-003-0131, 812-003-0142, 812-003-0152, 812-003-0153, 812-003-0260, 812-003-0265, 812-003-0270 · Oregon Secretary of State · Admin Rule · verified September 17, 2026
  10. OAR chapter 812, division 6 - Responsible Managing Individual, pre-licensure training, and testing · OAR 812-006-0100, 812-006-0110, 812-006-0150, 812-006-0160, 812-006-0300, 812-006-0310, 812-006-0450 · Oregon Secretary of State · Admin Rule · verified September 17, 2026
  11. OAR chapter 812, division 20 - Continuing education for construction contractors with commercial endorsements · OAR 812-020-0030 · Oregon Secretary of State · Admin Rule · verified September 17, 2026
  12. OAR 918-030-0015 - Contractor licenses (Building Codes Division requires a CCB license) · OAR 918-030-0015 · Oregon Secretary of State · Admin Rule · verified September 17, 2026
  13. ORS chapter 701 - Construction Contractors and Contracts (2025 edition) · ORS 701.005(16)-(17), 701.021, 701.042, 701.046, 701.050, 701.056, 701.063, 701.068, 701.073, 701.081, 701.084, 701.091, 701.098, 701.122 · Oregon Legislature · Statute · verified September 17, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related