LicensebyState

Kansas to Oregon: residential contractor license reciprocity

No credit· Start overVerified September 17, 2026· 13 sources

Kansas does not issue a statewide residential contractor license, so there is nothing to transfer. Here is Oregon's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

CCB application with the NASCLA examination in place of the pre-license training (every state)

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

Oregon runs no contractor reciprocity at all. OAR 812-006-0300(6) says in terms that there are no reciprocal agreements with other states or with organizations that test contractors, and nothing in ORS chapter 701 recognizes a license issued elsewhere, so a residential contractor license held in another state does not by itself waive or shorten any step here. What the Board does accept is the NASCLA Accredited Examination for Commercial General Building Contractors: under OAR 812-006-0310 an RMI who has passed it satisfies the 16-hour pre-license training requirement outright, whenever the exam was taken, and only has to sit the Oregon contractor test, with the pass proved by the RMI's entry in the NASCLA National Examination Database. That rule sits in the division governing every RMI and is not limited to a commercial endorsement, so it is available to an applicant taking the Residential General Contractor endorsement. An RMI without the NASCLA credential simply takes 16 hours of training from a CCB-approved provider first and then the same Oregon test. There is no trade or classification examination in Oregon at all: the only test is the Oregon contractor test on laws, rules and business practices, 80 scored questions in 180 minutes with 70 percent to pass, open book against the NASCLA Contractors Guide to Business, Law and Project Management for Oregon, and it is never waived. Everything after that is the same for an applicant from any state: registration with the Oregon Secretary of State, a $25,000 residential bond and at least $500,000 per occurrence of liability insurance filed on the Board's own forms, workers' compensation cover if the business has employees, and the $400 application fee.

Oregon requires no trade experience for a residential endorsement, so documented out-of-state years neither shorten nor replace any step at this level. Two other routes to RMI status exist but rarely help an inbound contractor: continuous association with an Oregon-licensed business from before 1 July 2000 with no lapse over 24 months, and a sole proprietor exemption under Oregon Laws 2018 chapter 46. Separately, OAR 812-003-0265 gives the spouse of an active-duty servicemember stationed in Oregon a temporary authorization of up to two years on a current out-of-state general, commercial or residential contractor license in good standing, proving competency by the NASCLA examination, the Oregon examination, or eight years of licensed contracting in another state, plus three hours of Board education and the usual fee, bond and insurance. The Board publishes no fee for the 16-hour pre-license training because each approved provider sets its own price; the provider list and the licensing call center on 503-378-4621 are where to ask. The license must be applied for within two years of passing the Oregon test.

At a glance

Trade exam
Waived
Law / code exam
Required
Out-of-state hours
Do not count
Typical processing
About 42 days

What you must already have

  • You must have passed a licensing exam in Kansas that the destination considers comparable.OAR 812-006-0310 accepts the pass whenever it was earned and proves it by the RMI's name appearing in the NASCLA National Examination Database, so no transcript is sent by the candidate. The NASCLA examination is an exam credential rather than a license or an interstate agreement, so it is open to a candidate from any state and gives no advantage tied to where the applicant is licensed now. It does not waive the Oregon contractor test, the bond, the insurance, the fee or any other requirement. An applicant without it takes 16 hours of approved training instead.
  • The business must designate at least one Responsible Managing Individual: an owner or an employee who exercises management or supervisory authority over the construction activities of the business. An RMI who is not an owner may serve only one licensee at a time, and a business that loses its RMI must appoint a replacement immediately or a temporary RMI for no more than 14 days, or the license is suspended.
  • You must have no disciplinary action or unresolved complaints on your record.ORS 701.098(1)(d). The application also requires five years of construction-related court judgments, administrative orders, pending complaints, convictions and indictments from any state, and unpaid construction debt blocks a new license for the business owners and for the RMI until it is satisfied.

What you'll do to get licensed in Oregon

  1. 1Other. At least 16 hours of pre-license training on business practices and law from a CCB-approved education provider, taken by the RMI. It is required of every applicant except an RMI who has passed the NASCLA Accredited Examination for Commercial General Building Contractors, and except the two narrow RMI routes based on pre-2000 Oregon licensure or the sole proprietor exemption. Providers set their own prices, so the Board publishes no figure; the approved provider list is on the CCB site and the education team can be reached on 503-934-2227. (if applicable).
  2. 2Law / code exam. Pass a law, rules, or code exam. The Oregon contractor test, administered by PSI at test centers in Oregon and other states or by remote proctor: 80 scored questions in 180 minutes, plus 8 unscored questions and 20 minutes, with 70 percent needed to pass. It is open book against the NASCLA Contractors Guide to Business, Law and Project Management for Oregon Construction Contractors, 2nd edition, which may be highlighted, tabbed and annotated beforehand. The subjects are Oregon contractor laws and regulations, business structure, employees, subcontractors, contracts, lien law, bidding and estimating, project management, building codes, jobsite safety, environmental factors, exterior shell, financial management and tax basics. A failed test may be retaken without limit, though not the same version on consecutive attempts, and the license application must follow within two years of the pass..
  3. 3Exam fee. Pay the exam fee ($60). PSI examination fee, payable when the test is scheduled. It covers first-time and repeat takers and stays valid for one year from the date of payment..
  4. 4Application fee. Pay the application fee ($400). CCB license application fee for a new license, set at $400 for applications received from 1 July 2025. It covers the two-year license; renewal is a further $400 every two years, and changing or adding an endorsement later costs $20. Application fees are not refunded. A licensee who is a sole proprietor or general partner on active duty in the armed forces does not pay a renewal fee falling due during that service..
  5. 5Surety bond. Post a surety bond ($25,000). A $25,000 residential surety bond for the Residential General Contractor endorsement, filed with the application. The Board accepts only its own CCB Residential Surety Bond form signed by an authorized agent of the surety or an attorney-in-fact, bearing a bond number, and filed within 60 days of the date the surety executed it. A residential bond answers only for residential and small commercial work, so a contractor also taking a commercial endorsement posts a second, commercial bond. Other residential endorsements carry different figures: $20,000 for Residential Specialty and $15,000 for Residential Limited and the restricted residential endorsements..
  6. 6Insurance. Carry the required insurance ($500,000). General liability insurance of at least $500,000 per occurrence for the Residential General Contractor endorsement, covering products and completed operations, with the certificate naming Construction Contractors Board, PO Box 14140, Salem, OR 97309 as certificate holder. Proof is filed with the application and again at every renewal. Residential Specialty needs $300,000 and Residential Limited $100,000. A contractor holding both a residential and a commercial endorsement carries a single policy at the higher of the two amounts..
  7. 7Insurance. Carry the required insurance (if applicable). Workers' compensation coverage, required of any business that is non-exempt, meaning it has employees. A sole proprietor with no employees, and a business in which every owner, officer or member is a family member, may file as exempt; the Board defines family as parents, spouses, sisters, brothers, daughters, sons, daughters-in-law, sons-in-law and grandchildren. A non-exempt applicant supplies its carrier, policy number, Workers' Compensation Division compliance number and employer tax identification numbers, and any change between exempt and non-exempt status must be reported to the Board within 10 days..
  8. 8Business license. Obtain a business license. A business entity that is required to register with the Oregon Secretary of State's Corporation Division must be registered, active and in good standing before the license issues, and every assumed business name used by the applicant must be registered as that entity's assumed business name. An out-of-state entity registers in Oregon in the same way..
  9. 9Background check. Complete a background check. The RMI clears a background check after the application is filed. The application itself asks the business and its owners and officers to disclose, for the five years before the application and from any state, unsatisfied construction-related court judgments and administrative orders, pending complaints alleging money owed, and judgments of conviction or indictments for the crimes listed in ORS 701.098, along with unpaid workers' compensation penalties and unpaid employee wages. Unsatisfied construction debt keeps both the owners and the RMI from obtaining a new CCB license until it is paid..
  10. 10Continuing education. Complete continuing education (if applicable). Not required to obtain the license. Each two-year license period a residential contractor must have an owner, officer, RMI or employee complete at least eight hours of continuing education, being three hours on CCB laws, regulations and business practices plus five hours of other approved courses. A contractor who has not held an Oregon residential license at any point in the six years before the renewal date completes an additional eight hours, so a newly licensed arrival owes 16 hours before the first renewal. Contractors who also hold certain Oregon licenses, including architect, engineer, electrician and plumber, are exempt..
  11. 11Other. A contractor whose Oregon work will include boiler, electrical, elevator or plumbing installation also needs the matching Building Codes Division contractor license, and OAR 918-030-0015 requires an active CCB license before the division will issue or renew one. The CCB license comes first, and it does not replace the division license..

Published fees on this path total $460, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Other · if applicable
  • Law / code exam
  • Exam fee · $60

Surety bond

A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.

  • Surety bond · $25,000

Liability insurance

Some states require proof of general liability or workers' compensation coverage at licensing time.

  • Insurance · $500,000
  • Insurance · if applicable

Business registration

If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.

  • Business license

Continuing education

Renewals usually need approved CE hours, often on the latest NEC. Reciprocal licensees are rarely exempt.

  • Continuing education · if applicable

How Oregon licenses residential contractors

Oregon residential contractor · “Construction contractor license with the Residential General Contractor (RGC) endorsement

Statewide license

Verified September 17, 2026· 6 sources

Issued by Oregon Construction Contractors Board (CCB)

Oregon licenses contractors statewide through the Construction Contractors Board, and under ORS 701.021 anyone who undertakes, offers to undertake or bids work as a contractor must hold a current CCB license and the endorsement that matches the work. The unusual part of Oregon's structure is that there is only one construction contractor license: what the applicant chooses is an endorsement, and the endorsement sets the bond and the insurance. The homes tier is the Residential General Contractor (RGC) endorsement, which allows an unlimited number of unrelated building trades on residential or small commercial structures and carries a $25,000 residential bond and general liability insurance of at least $500,000 per occurrence. Its narrower siblings are Residential Specialty ($20,000 bond, $300,000 insurance, one or two trades), Residential Limited ($15,000 and $100,000, for a business under $40,000 of gross sales a year and $5,000 a contract) and Residential Developer, and a license may carry one residential endorsement, one commercial endorsement, or one of each, in which case the contractor posts two bonds and carries one liability policy at the higher amount. The license is held by the business rather than by the person: a sole proprietor, partnership, LLC, corporation or trust applies, and it must at all times have at least one Responsible Managing Individual (RMI), an owner or employee who exercises management or supervisory authority over the construction activities and who has completed 16 hours of CCB-approved pre-license training and passed the Oregon contractor test. Oregon sets no net worth, working capital or financial statement test and no minimum trade experience for a residential endorsement, so a builder moving to Oregon applies as or for the business that will sign the contracts and names themselves as its RMI.

Moving to OregonLeaving Oregon

Why Kansas has nothing to transfer

Kansas residential contractor · “Residential contractor license (Class C in most Kansas jurisdictions)

Licensed by cities and counties

Verified September 17, 2026· 19 sources

Issued by No state authority; cities and counties license residential contractors

Kansas issues no statewide residential builder, home builder or home improvement contractor license, and it has no state contractor board or state contractor exam. Cities and counties license builders instead, and most of the larger ones use the same shape: a company-held license qualified by a named person, in classes lettered A for unlimited work, B for buildings up to three stories and C for houses and duplexes. What the legislature did do is standardize the test. K.S.A. 12-1556 designates a set of standard examinations for 'general contractors, building contractors and residential contractors', and K.S.A. 12-1557 requires any Kansas city or county that licenses builders to set a 75 percent passing score, to charge a uniform examination fee and to accept the resulting certificate of competency 'without additional examination' anywhere else in the state that licenses contractors. In practice that means the credential Kansas jurisdictions care about is a passing score on the ICC Kansas contractor examination series - 550 for the Class A general building contractor, 551 for Class B and 552 for Class C residential - rather than a license held anywhere else. A residential builder moving to Kansas therefore has no state license to transfer and nothing to reciprocate into; the practical work is sitting the Kansas standard examination once, then licensing the business in each place where it will pull permits. The state does license two things a residential builder touches: roofing contractors, who must register with the Kansas Attorney General under the Kansas Roofing Registration Act before selling roofing services for a fee, and mobile home installers.

How local licensing works in Kansas

How local licensing works. Every Kansas contractor license is issued by a city or a county, and the license belongs to the company rather than to the person; the company names a qualifying individual or qualifying party who supplies the examination result or degree, and losing that person usually inactivates the license. Two state statutes shape what the jurisdictions may ask. K.S.A. 12-1557 caps the examination at the designated standard test, sets the passing score at 75 percent, and makes the certificate of competency from that test valid for licensure 'without additional examination' in any other Kansas county or city that licenses contractors. K.S.A. 12-1558 lets a jurisdiction use a different examination instead, but a license granted on a non-standard examination does not authorize work outside that jurisdiction 'except when authorized by reciprocal agreement between the political subdivisions involved' - so the only contractor reciprocity Kansas law contemplates is between Kansas cities and counties, never with another state. None of the jurisdictions below gives any credit for a contractor license issued outside Kansas.

Johnson County (Overland Park, Olathe, Lenexa, Leawood, Shawnee and the rest of the county). Johnson County Contractor Licensing, a division of Planning, Housing and Community Development, issues and tracks eleven license types for the whole county. Building permits are issued by Johnson County Building Codes in the unincorporated county and by each city elsewhere, and the county's own application states the rule plainly: 'When a building permit is issued in the company/firm's name, the company/firm must comply with Johnson County Contractor Licensing Regulations (Resolution 076-24) and be subject to the jurisdiction of the Johnson County Contractor Licensing Review Board.' The residential class is Class C, which 'shall entitle the holder thereof to construct, remodel, repair, and demolish single-family or duplex residences and buildings accessory thereto', including framing, roofing, swimming pool construction, non-structural remodeling and repairs, but not HVAC, plumbing, electrical or fire protection work, which need the separate DM, DP, DE and DF or DFA licenses. Qualification is ICC exam 552 or KGC, Standard Residential Building Contractor, at 75 percent or better, or a Bachelor of Science or higher in architecture, relevant engineering, construction science or construction management from an ABET or ACCE accredited program. The company must designate a qualifying individual who works at least 30 hours a week for it, and every qualifying individual needs eight hours of approved continuing education a year for the company to renew. Insurance is $1,000,000 combined single limit per occurrence plus $1,000,000 completed operations, with the county named as certificate holder and 30 days' notice of any reduction, plus workers' compensation with $100,000 employer's liability or a notarized waiver if there are no employees. A Certificate of Good Standing is needed from the Secretary of State where the company is registered. Fees are a $100 application fee plus $225 per license type, so a single new license is $325; renewal is $225 per type with a $75 late fee from February 1. New applications cannot be filed online. Licenses are valid for one year. 111 S. Cherry Street, Suite 1000, Olathe; 913-715-2233 option 1.

Wichita and Sedgwick County. The Metropolitan Area Building and Construction Department licenses contractors for unincorporated Sedgwick County, the City of Wichita and the small cities it serves, and its position on outside credentials is explicit: 'MABCD does not reciprocate with other jurisdictions.' The residential general class is Class C - Residential, and there is also a Class D Residential Maintenance license; general contractor licenses run two years and expire on December 31 of each even year, with a grace period to January 31. The qualified person must produce 'a copy of Kansas Standard ICC exam' with a score of 75 percent or better, and must file an ICC test release form if the examination was taken outside Kansas. Two-year license fees are $1,000 for Class A, $600 for Class B, $450 for Class C Residential and $360 for Class D Residential Maintenance, roofing, siding, roofing and siding, swimming pool, wrecking, cell tower, fire sprinkler and 'not otherwise classified'; a new application costs an extra $50, and late renewal adds 25 percent in February and 50 percent after that. The filing also needs liability insurance of at least $300,000 naming MABCD as certificate holder in the exact company name, a workers' compensation certificate or a notarized waiver, an auto certificate or a notarized waiver, a Certificate of Good Standing from the Kansas Secretary of State unless the applicant is a sole proprietor, a qualified person declaration page, a company officers signature page and a letter authorizing the qualified person to bind the company in contracts. Roofing applicants must show their Kansas Attorney General roofer registration number. Review takes up to two weeks. 271 W. 3rd, Suite 101, Wichita; 316-660-1840, by appointment.

Kansas City, Kansas and Wyandotte County. The Unified Government works differently from the rest of the state: it does not run a competency license for builders. 'General contractors and subcontractors are required to obtain a city occupational tax license (Business License) if working within Wyandotte County', which is handled by Business Licensing on (913) 573-8780, while 'trade masters are required to carry a master's license with Building Inspections', earned on a Prometric or equivalent standard examination and administered through the Neighborhood Resource Center. A remodeler or homebuilder working in Kansas City, Kansas therefore registers and pays the occupational tax rather than qualifying a person, and makes sure the electrical, mechanical and plumbing scope is performed by licensed masters. Building Inspection and the License Department are both at 4601 State Avenue, Indian Springs Marketplace; Building Inspection (913) 573-8620.

Topeka. The Development Services Division 'is responsible for issuing all contractor and trade licenses in the City of Topeka', and 'all trades are required to be licensed and pull permits to work in City of Topeka.' The residential class is Class C, qualified by ICC exam 552, the Kansas Standard Residential Building Contractor examination, at 75 percent or better; Class B uses exam 551 and Class A exam 550. Topeka will also accept results from Prometric, Thomson-Prometric, Experior, NAI-Block and Block at 75 percent or better, subject to review, or an official transcript for at least 30 hours of coursework from an accredited school in construction science, engineering or architecture, in which case the degree holder becomes the qualifying party and must work for the company full time. The application is filed with the exam or educational certification, a qualifying party verification form, the Renovate Right form, a general liability certificate and a workers' compensation certificate or notarized affidavit, all naming City of Topeka Development Services, 620 SE Madison Unit 6, as certificate holder; processing takes up to ten days. Class A, B and C holders need eight hours of continuing education a year, licenses renew by December 14 each year, fees are not prorated, a lapse in the insurance certificate costs $30 to reinstate after a 30-day grace period, and an unreported address change costs $10. Roofers must supply their Kansas Attorney General roofer registration certificate number before Topeka will license them. The city does not publish its general contractor license fee online - ask Development Services on 785-368-3905 for the current amount before applying.

Lawrence. Chapter 5, Article 15 of the City Code requires a Lawrence contractor license before anyone may 'undertake or perform any action in the City for which a Building Permit is required.' The residential class is Class C, Residential Contractor, covering any permitted work 'on any detached dwelling or duplex'; Class B covers structures up to three stories and Class A everything. Class C needs two years of qualifying experience performing Class C work, or a valid Class D license plus four years as a licensed Class D contractor, and experience claims must be verified by a licensed contractor, building official, architect or engineer. Competency is shown by a certificate of competency from a nationally recognized testing institution of the kind contemplated by K.S.A. 12-1556, by a bachelor's degree in engineering, architecture or construction science, or 'an equivalent Contractor License from another jurisdiction with whom the City has an existing and valid reciprocity agreement' - the ordinance provides for such agreements but names none, so ask Building Inspections whether one covers your jurisdiction before relying on it. Fees are a $75 application fee for each applicant and each qualifying party plus a $75 annual license fee. Insurance is commercial general liability of not less than $1,000,000 per occurrence including completed operations, written by a Kansas-licensed insurer, plus workers' compensation. The Building Official decides within 30 days. The license is company-held, each qualifying party must be a principal or an employee working more than 30 hours a week, and any change of company name, ownership or qualifying party voids the license and requires a new one. Renewal needs eight hours of construction-related continuing education a year for every qualifying party, all delinquent fees paid and all inactive open permits closed or extended. Separate Class E licenses cover mechanical, plumbing, electrical and fireplace work, and those trades also need certified master or journeyman tradespeople. (785) 832-7700.

Everywhere else. Kansas has hundreds of other cities and counties, each free to license builders, to license only the trades, or to require nothing beyond a permit and proof of insurance. Find the building department with jurisdiction over the address and ask before you bid. Two obligations follow you across the whole state whatever the local answer: register with the Kansas Attorney General before providing roofing services for a fee unless you qualify as an exempt general contractor, and hold or employ the right trade credentials for any electrical, plumbing or mechanical work.

Moving to KansasLeaving Kansas

Common questions

Do I have to take the Oregon residential contractor exam if I'm licensed in Kansas?
The trade exam is waived, but Oregon requires a law or code exam.
What does it cost to get a Oregon residential contractor license from Kansas?
Published fees on this path total $460, not counting exam vendor fees or bonds.
Do my Kansas work hours count in Oregon?
No. Oregon does not credit out-of-state hours on this path.
How long does the application take?
The board's published or typical processing time is about 42 days.
Does it work the other way, from Oregon to Kansas?
Not necessarily. Reciprocity is directed. Going from Oregon to Kansas, the mechanism is not applicable.

Sources

  1. NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
  2. CCB Frequently Asked Questions (application), updated 3/2026 · Oregon Construction Contractors Board · Faq · verified September 17, 2026
  3. Construction Contractors Board - Continuing education · Oregon Construction Contractors Board · Agency Page · verified September 17, 2026
  4. CCB License Endorsements chart (11/2024) · Oregon Construction Contractors Board · Other · verified September 17, 2026
  5. Oregon Construction Contractors Board Examination Candidate Information Bulletin (PSI) · Oregon Construction Contractors Board / PSI Services LLC · Other · verified September 17, 2026
  6. Construction Contractors Board - How to get a CCB license (9 steps) · Oregon Construction Contractors Board · Agency Page · verified September 17, 2026
  7. CCB Sole Proprietorship License Application · Oregon Construction Contractors Board · Form · verified September 17, 2026
  8. Construction Contractors Board - Licensing (bonds, insurance, public works bond) · Oregon Construction Contractors Board · Agency Page · verified September 17, 2026
  9. OAR chapter 812, division 3 - Construction Contractors Board licensing · OAR 812-003-0131, 812-003-0142, 812-003-0152, 812-003-0153, 812-003-0260, 812-003-0265, 812-003-0270 · Oregon Secretary of State · Admin Rule · verified September 17, 2026
  10. OAR chapter 812, division 6 - Responsible Managing Individual, pre-licensure training, and testing · OAR 812-006-0100, 812-006-0110, 812-006-0150, 812-006-0160, 812-006-0300, 812-006-0310, 812-006-0450 · Oregon Secretary of State · Admin Rule · verified September 17, 2026
  11. OAR chapter 812, division 22 - Continuing education for residential contractors · OAR 812-022-0010, 812-022-0020 · Oregon Secretary of State · Admin Rule · verified September 17, 2026
  12. OAR 918-030-0015 - Contractor licenses (Building Codes Division requires a CCB license) · OAR 918-030-0015 · Oregon Secretary of State · Admin Rule · verified September 17, 2026
  13. ORS chapter 701 - Construction Contractors and Contracts (2025 edition) · ORS 701.005(16)-(17), 701.021, 701.042, 701.046, 701.050, 701.056, 701.063, 701.068, 701.073, 701.081, 701.084, 701.091, 701.098, 701.122 · Oregon Legislature · Statute · verified September 17, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related