LicensebyState

Kentucky to Florida: general contractor license reciprocity

No credit· Start overVerified September 17, 2026· 14 sources

Kentucky does not issue a statewide general contractor license, so there is nothing to transfer. Here is Florida's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

Certification by endorsement, including the NASCLA Accredited Examination route

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

Florida accepts the NASCLA Accredited Examination for Commercial General Building Contractors in place of its own trade knowledge parts. The Board's reciprocity notice states that the NASCLA General Contractors Exam from 2009 forward 'is substantially similar to all Florida Division 1 license trade knowledge exams', and Form DBPR CILB 10 tells NASCLA applicants to apply under Option A, where the official score report and the Examination Evaluation Questionnaire are not required; the NASCLA transcript is released to the Board instead. NASCLA applicants must still pass the Florida Business and Finance examination, attest to having passed an examination covering the Florida Building Code, and complete the experience section of the application. An applicant without the NASCLA credential uses the same $350 form under Option A with another examination the Board finds substantially equivalent (a comparison the form calls 'very stringent and rarely approved'), Option B for a license whose issuance criteria were substantially equivalent, or Option C for the same or a similar license held at least 10 years and active now or within the last 2 years, which adds a board-approved 2-hour Florida Building Code course. Applicants who are not approved for a waiver register with Professional Testing and sit the three Division 1 parts through Pearson VUE.

The trade parts are waived on the NASCLA route, on an accepted equivalence under Option A or B, and under the 10-year provision in Option C; applicants outside those routes sit the Florida Contract Administration and Project Management examinations. The Business and Finance exam is never waived. The Board does not publish a processing time for endorsement applications; the Customer Contact Center is 850-487-1395.

At a glance

Trade exam
Waived
Law / code exam
Required
Out-of-state hours
Count toward eligibility

What you must already have

  • You must have passed a licensing exam in Kentucky that the destination considers comparable.The NASCLA Accredited Examination for Commercial General Building Contractors (NASCLA General Contractors Exam, 2009 forward) is the route the Board names: applicants select Option A on Form DBPR CILB 10, skip the score report and Examination Evaluation Questionnaire, and have the NASCLA transcript released to the Board. The same option is open to any other national, regional, state or territorial licensing examination the Board finds substantially equivalent, evidenced by an official score report and an Examination Evaluation Questionnaire completed by the origin exam provider.
  • Your Kentucky license must be active and in good standing.
  • You must have held your Kentucky license for at least 10 years.Option C only: the same or a similar contracting license held for at least 10 years before the date of application, currently active or active within the last 2 years
  • Experience under s. 489.111(2): four years as a worker or foreman with at least one year as a foreman, or a four-year construction-related degree plus one year, or the published college-credit combinationsCertified General Contractor applicants must additionally show experience in four or more of the listed experience areas and at least one year of experience on the construction of structures four stories or higher, under Rule 61G4-15.001(2). Experience earned in another state counts and is documented with a full employment and project history.

What you'll do to get licensed in Florida

  1. 1Application fee. Pay the application fee ($350). Form DBPR CILB 10 certification by endorsement application fee.
  2. 2Law / code exam. Pass a law, rules, or code exam. Florida Business and Finance examination through Pearson VUE; it is not waived on any endorsement option, including the NASCLA route.
  3. 3Trade exam. Pass the destination's trade exam (if applicable). Florida Division 1 Contract Administration and Project Management examinations, required only for applicants who do not qualify through the NASCLA examination, an accepted equivalence or the 10-year provision.
  4. 4Other. Examination covering the Florida Building Code: NASCLA applicants attest on the application to having passed one, and applicants using the 10-year endorsement option provide proof of a board-approved 2-hour Florida Building Code course including wind mitigation techniques.
  5. 5Exam fee. Pay the exam fee ($135). Professional Testing, Inc. registration fee, charged each time a registration is made for any exam part.
  6. 6Exam fee. Pay the exam fee ($80). Pearson VUE administration fee for the Business and Finance computer-based test (Contract Administration and Project Management are $40 each).
  7. 7License fee. Pay the license or certificate fee ($200). Initial certification fee under Rule 61G4-12.009, reduced to $100 if the application is submitted in the second year of the biennium; biennial renewal is also $200.
  8. 8Business license. Obtain a business license ($50) (if applicable). Application or renewal fee for each business organization the certificate holder qualifies, filed on Form CILB 6-A.
  9. 9Background check. Complete a background check. Electronic fingerprints for the criminal history check required by s. 489.115, F.S..
  10. 10Financial responsibility. Show financial responsibility. A credit report from a nationally recognized agency showing a FICO-derived score and a public records statement checked at local, state and federal levels, with no unsatisfied judgments or liens; a score below 660 must be offset with a Board-approved 14-hour financial responsibility course. A business credit report is required as well when qualifying a business. The Board publishes no minimum net worth or working capital figure: Rule 61G4-15.006 sets none, and s. 489.115(5)(b) only caps what the Board could require at $20,000 for Division I. Ask the Customer Contact Center at 850-487-1395 before assuming a dollar threshold applies..
  11. 11Insurance. Carry the required insurance. Public liability insurance of $300,000 and property damage insurance of $50,000 for General and Building Contractors, plus workers' compensation coverage or a filed exemption.
  12. 12Continuing education. Complete continuing education (if applicable). 14 hours of continuing education each renewal cycle, with mandatory hours in workplace safety, workers' compensation, business practices, building code and laws and rules. Certified licenses expire August 31 of every even-numbered year..

Published fees on this path total $765, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Law / code exam
  • Trade exam · if applicable
  • Exam fee · $135
  • Exam fee · $80

Continuing education

Renewals usually need approved CE hours, often on the latest NEC. Reciprocal licensees are rarely exempt.

  • Other
  • Continuing education · if applicable

Business registration

If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.

  • Business license · $50 · if applicable

Liability insurance

Some states require proof of general liability or workers' compensation coverage at licensing time.

  • Insurance

How Florida licenses general contractors

Florida general contractor · “Certified General Contractor (CG)

State license plus local requirements

Verified September 17, 2026· 7 sources

Issued by Florida Construction Industry Licensing Board (Department of Business and Professional Regulation)

Florida's unlimited tier is the Certified General Contractor (occupation code CG), issued by the Construction Industry Licensing Board within DBPR. Section 489.105(3)(a), F.S. describes it as a contractor 'whose services are unlimited as to the type of work which he or she may do', subject only to the trade-license carve-outs in s. 489.113. Between residential and general sits the Certified Building Contractor (CB), limited to commercial buildings and residential buildings of not more than three stories, plus remodeling of any size building where the work does not affect structural members; General, Building and Residential together make up the Board's Division I. As at every level, a certified contractor holds a department certificate of competency good in any Florida jurisdiction, while a registered contractor (RG) has satisfied a county or city competency board and may contract only in those jurisdictions. The license is held by the individual who qualifies on experience and examination; qualifying a business organization is a separate application, so a contractor moving to Florida is licensed personally first. The practical difference between the General and Building classes for an arriving applicant is the four-story rule: a Certified General Contractor must document at least one year of experience on the construction of structures at least four stories in height.

How local licensing works in Florida

Why this level is Hybrid. Sections 489.105(8) and (10), F.S. create two tracks that both run through DBPR: state certification, valid statewide, and state registration of contractors who met a local jurisdiction's competency requirements, valid only in those jurisdictions. That is why the Board's application list pairs CG with RG, CB with RB and CR with RR. An arriving contractor who obtains the certified license never needs a local competency card, though local building departments still issue permits and may require registration of the state license.

Miami-Dade County. The Construction Trades Qualifying Board licenses Building and Building Specialties contractors, among other trades, under Chapter 10 of the county code. It reciprocates only with Broward and Palm Beach counties in specific trade categories (75 percent on journeyman exams, 70 percent on other reciprocal category exams) and offers state-certified contractors a voluntary registration that speeds permitting in unincorporated Miami-Dade by pre-verifying license status and insurance.

Broward County. The Building Code Division's Central Examining Boards issue Certificates of Competency; the applications, the examining board calendar and the list of mandatory and voluntary certifications are published in the county's contractor packet (954-765-4400 x9876).

Out-of-state applicants. The county programs reviewed publish no rule recognizing an out-of-state contractor license. The state routes, Form CILB 32 for reciprocity and Form CILB 10 for endorsement, are the ones that produce a statewide license.

Moving to FloridaLeaving Florida

Why Kentucky has nothing to transfer

Kentucky general contractor · “General or commercial building contractor license or registration (city- or county-issued)

Licensed by cities and counties

Verified September 17, 2026· 13 sources

Issued by No state authority; cities and counties license or register commercial building contractors

Kentucky has no statewide general, commercial or unlimited building contractor license, so there is nothing at state level for an out-of-state general contractor's license to transfer into, no qualifying party to designate with the state and no NASCLA route to take. The Department of Housing, Buildings and Construction licenses the trades instead - its home page says it "licenses/certifies plumbers, electricians, boiler contractors, sprinkler and/or fire alarm contractors and building inspectors", and 815 KAR adds HVAC licensing, elevator safety, boilers and pressure vessels, manufactured homes and home inspectors, with no chapter for building contractors anywhere in the title. Commercial building is controlled through local permitting, and the requirements are administrative rather than technical. Louisville Metro issues a Building Type A - Commercial license for $125 a year on a liability certificate, a workers' compensation filing and a Jefferson County occupational license number, with no exam and no bond. Lexington-Fayette registers a general contractor who "performs commercial, industrial, public works, and/or residential construction of larger than four-family homes" under its Contractors Registration Ordinance, and unregistered contractors cannot obtain building permits there. Bowling Green and Warren County run a joint Contractors Licensing Board whose $250 General Contractors License covers construction management and permit pulling, while telling applicants plainly that the license does not warrant that they are qualified. Owensboro and Covington require only an occupational business license and insurance. A commercial builder arriving in Kentucky therefore registers jurisdiction by jurisdiction and makes sure the plumbing, electrical, HVAC, boiler and fire-protection scope is performed under the correct HBC state licenses.

How local licensing works in Kentucky

How local licensing works. Kentucky has no state general contractor board, no state business-and-law exam for builders and no statewide reciprocity for commercial construction. Every rule that binds a general contractor is either a trade license from the Department of Housing, Buildings and Construction, the Kentucky Building Code in 815 KAR Chapter 007, or a local ordinance. Find the building department with jurisdiction over the site first, then register there before bidding. A registration in one Kentucky jurisdiction is worth nothing in the next, and an out-of-state general contractor license is worth nothing in any of them.

Louisville Metro (Jefferson County). The Office of Construction Review licenses building contractors for the merged city-county. License A covers "one or more permitted projects during a calendar year" and License B a single permitted project; the work scopes are Building A-Residential, Building A-Residential/Commercial, Building A-Commercial and Building B. Building Type A is "for building contractors seeking to obtain multiple permits within Louisville Jefferson County" at $125 a year on a term running 1 January to 31 December; Building Type B is $50 and is limited to one permit per person or company per renewal year. The filing is a certificate of liability insurance with the Office of Construction Review as certificate holder, workers' compensation and unemployment insurance or a notarized affidavit where the contractor has no covered employees, an Occupational License Number from the Revenue Commission of Jefferson County, and the application through the Metro business portal. The six-hour continuing education requirement attaches to the scopes that include housing - Building A-R, Building A-RC and Building B - so a contractor registered purely as Building A-Commercial is the one building class without it. Renewals must include a subcontractor list. There is no exam, experience review, bond or financial statement on any building class. 444 S. 5th St., Suite 100, (502) 574-3321.

Lexington-Fayette Urban County. The Division of Building Inspection registers every contractor under the Contractors Registration Ordinance, and "unregistered contractors cannot obtain building permits." The commercial class, under Ordinance 5-90(a)(1), is the general contractor, who "performs commercial, industrial, public works, and/or residential construction of larger than four-family homes (4-plex); and may supervise, arrange, and/or perform wholly or partly more than two building trades or crafts." A firm that concentrates on one or two trades registers as a specialty contractor instead. The filing is a Home Office Certificate ($10) or Certificate of Occupancy ($25) where the business address is in Fayette County, an occupational business license from Revenue, general liability and workers' compensation insurance with LFUCG named as certificate holder, and the online Contractor Registration Application with those two documents uploaded. No exam, experience or bond is required. The published Building Inspection fee schedule covers permits and lists no contractor registration fee, so confirm the amount with the division. 101 E. Vine St., (859) 258-3770.

Bowling Green and Warren County. One joint Contractors Licensing Board serves the city and the county under Ordinance 91-58 WC and Ordinance 91-25 BG. The General Contractors License, $250 and non-refundable, is required of anyone "doing any type of general contract work in Bowling Green / Warren County including pulling permits for building or remodeling, construction management, or if you would have two or more subcontractors per job." The Specialty Contractors License is $100 and covers subcontract work or a job with at most one subcontractor. Insurance is the substantive test: a certificate naming the board as certificate holder with general liability of at least $100,000 per occurrence, workers' compensation shown on the certificate or a notarized Affidavit of Exemption, and a notarized Partnership Agreement for partnerships. Licenses are non-transferable, renewals are annual and pro-rated mid-year, and a change of ownership voids the license. There is no exam or experience requirement; the board states that it "does not warrant that you are otherwise qualified to perform your trade or specialty by the issuance of its license." A city occupational license is needed for work inside Bowling Green and a county one for work outside it. 1141 State Street, Suite 200, 270-781-3530.

Owensboro and Daviess County. There is no contractor license here. The Owensboro Metropolitan Planning Commission's Building & Electrical Division issues building, electrical, HVAC, sign and parking lot permits and certificates of occupancy for Owensboro-Daviess County under the Kentucky Building Code and the National Electrical Code, and issues no contractor credential; demolition permits come from City of Owensboro Public Works. A commercial builder registers with the city's Occupational License Division before doing business inside the city limits, with a minimum license fee of $75 at registration. 101 East 4th Street, 270-687-5600.

Covington and Kenton County (Northern Kentucky). Planning and Development Services of Kenton County is the building department, and it requires that "all contractors must obtain and maintain a Kenton County occupational license and provide proof of Kentucky workers' compensation insurance coverage", plus the HBC state license "for electrical, HVAC, plumbing, and fire suppression work", with copies of all of it on file "before any permits can be issued." There is no general contractor license, exam or bond. In Covington a zoning permit precedes the building permit, and a certificate of appropriateness is needed first inside a historic preservation overlay. PDS, 1840 Simon Kenton Way, Suite 3400, Covington, 859-331-8980.

What does and does not travel. An out-of-state general contractor license, a NASCLA Accredited Examination and out-of-state project experience carry no weight in any Kentucky jurisdiction, because none of them tests or qualifies commercial builders. Kentucky is not a NASCLA participating state, and no Kentucky city on this page accepts an examination in place of its own filing. What does matter is holding, or employing someone who holds, the Department of Housing, Buildings and Construction license for each state-licensed trade in scope - plumbing, electrical, HVAC, boilers, fire sprinklers and fire alarms - because those licenses are statewide, are the only Kentucky construction credentials with reciprocity rules of their own, and are separately demanded by several of the local building departments above.

Moving to KentuckyLeaving Kentucky

Common questions

Do I have to take the Florida general contractor exam if I'm licensed in Kentucky?
The trade exam is waived, but Florida requires a law or code exam.
How long do I need to have held my Kentucky license?
At least 10 years before applying.
What does it cost to get a Florida general contractor license from Kentucky?
Published fees on this path total $765, not counting exam vendor fees or bonds.
Do my Kentucky work hours count in Florida?
Yes. Documented out-of-state experience counts toward Florida's eligibility requirements.
Does it work the other way, from Florida to Kentucky?
Not necessarily. Reciprocity is directed. Going from Florida to Kentucky, the mechanism is not applicable.

Sources

  1. Broward County Building Code Division - Get a License (Central Examining Boards) · Broward County Building Code Division · Agency Page · verified September 17, 2026
  2. DBPR Construction Industry - Frequently Asked Questions · Florida Department of Business and Professional Regulation · Faq · verified September 17, 2026
  3. DBPR - Construction Industry Licensing Board (CILB) home page · Florida Department of Business and Professional Regulation · Agency Page · verified September 17, 2026
  4. CILB Reciprocity list (states with reciprocal licensing agreements) · Fla. Stat. § 489.115(3)(c) · Florida Construction Industry Licensing Board · Agreement Document · verified September 17, 2026
  5. Form DBPR CILB 10 - Application for Certification by Endorsement (Eff. June 2024) · Fla. Stat. § 489.115(3); Rule 61-35.010, F.A.C. · Florida Department of Business and Professional Regulation · Form · verified September 17, 2026
  6. Form DBPR CILB 32 - Application for Certification by Reciprocity (Eff. July 2024) · Fla. Stat. § 489.115(3)(c); Rule 61-35.010, F.A.C. · Florida Department of Business and Professional Regulation · Form · verified September 17, 2026
  7. DBPR Bureau of Education & Testing - Florida State Construction Examination Registration Instructions and Application 2026 (Professional Testing, Inc.) · Rule 61G4-16, F.A.C. · Florida Department of Business and Professional Regulation / Professional Testing, Inc. · Form · verified September 17, 2026
  8. Miami-Dade County - Contractors & Building Trades (Construction Trades Qualifying Board) · Miami-Dade County Department of Regulatory and Economic Resources · Agency Page · verified September 17, 2026
  9. Rule 61G4-12.009, F.A.C. - Fees · Rule 61G4-12.009, F.A.C. · Florida Construction Industry Licensing Board · Admin Rule · verified September 17, 2026
  10. Rule 61G4-15.006, F.A.C. - Financial Responsibility and Financial Stability, Grounds for Denial · Rule 61G4-15.006, F.A.C. · Florida Construction Industry Licensing Board · Admin Rule · verified September 17, 2026
  11. Florida Statutes s. 489.105 - Definitions (Part I, Construction Contracting) · Fla. Stat. § 489.105(3)(a)-(c), (8), (10) · Florida Legislature · Statute · verified September 17, 2026
  12. Florida Statutes s. 489.111 - Licensure by examination · Fla. Stat. § 489.111(2) · Florida Legislature · Statute · verified September 17, 2026
  13. Florida Statutes s. 489.115 - Certification and registration; endorsement; reciprocity · Fla. Stat. § 489.115(3), (5) · Florida Legislature · Statute · verified September 17, 2026
  14. NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related