LicensebyState

Kentucky to Florida: residential contractor license reciprocity

No credit· Start overVerified September 17, 2026· 14 sources

Kentucky does not issue a statewide residential contractor license, so there is nothing to transfer. Here is Florida's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

Certification by endorsement (states without a reciprocal agreement)

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

Florida accepts the NASCLA Accredited Examination for the Certified Residential class as well as for the two commercial classes: Form DBPR CILB 10 marks the NASCLA option 'applicable only for the General, Building, and Residential license', and the Board's reciprocity notice treats the NASCLA exam from 2009 forward as substantially similar to all Florida Division 1 trade knowledge exams, naming the RC class among them. A residential contractor licensed anywhere other than Louisiana, Mississippi or North Carolina applies on that $350 form under one of three options. Option A covers the NASCLA credential, and also any other national, regional, state or territorial examination the Board finds substantially equivalent, which needs an official score report and an Examination Evaluation Questionnaire from the origin exam provider; the Board's own form warns that a comparison of a state-specific test is 'very stringent and rarely approved'. Option B is for a license whose issuance criteria were substantially equivalent, proved with the license and the origin statutes and rules. Option C is for an applicant who has held the same or a similar contracting license for at least 10 years before applying, active now or within the last 2 years, and it adds a board-approved 2-hour Florida Building Code course covering wind mitigation. Everyone must still meet the experience standard of s. 489.111(2) and pass the Florida Business and Finance examination, and applicants who do not qualify for a waiver register with Professional Testing ($135) and sit the three-part Division 1 examination through Pearson VUE.

The Contract Administration and Project Management parts are waived on the NASCLA route, on an accepted equivalence under Option A or B, and under the 10-year provision in Option C; applicants outside those routes sit both parts. The Business and Finance exam and the Florida Building Code attestation are not waived on any option. The Board does not publish a processing time for endorsement applications; the Customer Contact Center is 850-487-1395.

At a glance

Trade exam
Waived
Law / code exam
Required
Out-of-state hours
Count toward eligibility

What you must already have

  • Your Kentucky license must be active and in good standing.
  • You must have passed a licensing exam in Kentucky that the destination considers comparable.The NASCLA Accredited Examination for Commercial General Building Contractors (NASCLA General Contractors Exam, 2009 forward) is accepted for the Certified Residential class: Form DBPR CILB 10 marks the option 'applicable only for the General, Building, and Residential license', and the Board's reciprocity notice treats the exam as substantially similar to all Florida Division 1 trade knowledge exams, listing RC among them. NASCLA applicants select Option A, skip the score report and Examination Evaluation Questionnaire, have the NASCLA transcript released to the Board, and still complete the experience section. The same option is open to any other national, regional, state or territorial licensing examination the Board finds substantially equivalent, evidenced by an official score report and an Examination Evaluation Questionnaire completed by the origin exam provider.
  • You must have held your Kentucky license for at least 10 years.Option C only: the same or a similar contracting license held for at least 10 years before the date of application, currently active or active within the last 2 years
  • Experience under s. 489.111(2): four years as a worker or foreman with at least one year as a foreman, or a four-year construction-related degree plus one year, or the published college-credit combinations. Residential applicants must show experience in three of the five experience areas listed in the application under Rule 61G4-15.001(3). Experience earned in another state counts and is documented with a full employment and project history.

What you'll do to get licensed in Florida

  1. 1Application fee. Pay the application fee ($350). Form DBPR CILB 10 certification by endorsement application fee.
  2. 2Trade exam. Pass the destination's trade exam (if applicable). Florida Division 1 Contract Administration and Project Management examinations through Pearson VUE, required only for applicants who do not qualify through the NASCLA examination, an accepted equivalence or the 10-year provision.
  3. 3Law / code exam. Pass a law, rules, or code exam. Florida Business and Finance examination through Pearson VUE; it is not waived on any endorsement option, including the NASCLA route.
  4. 4Exam fee. Pay the exam fee ($135). Professional Testing, Inc. registration fee, charged each time a registration is made for any exam part.
  5. 5Exam fee. Pay the exam fee ($80). Pearson VUE administration fee for the Business and Finance computer-based test (Contract Administration and Project Management are $40 each).
  6. 6License fee. Pay the license or certificate fee ($200). Initial certification fee under Rule 61G4-12.009, reduced to $100 if the application is submitted in the second year of the biennium; biennial renewal is also $200.
  7. 7Business license. Obtain a business license ($50) (if applicable). Application or renewal fee for each business organization the certificate holder qualifies, filed on Form CILB 6-C.
  8. 8Background check. Complete a background check. Electronic fingerprints for the criminal history check required by s. 489.115, F.S..
  9. 9Financial responsibility. Show financial responsibility. A credit report from a nationally recognized agency showing a FICO-derived score and a public records statement checked at local, state and federal levels, with no unsatisfied judgments or liens; a score below 660 must be offset with a Board-approved 14-hour financial responsibility course. A business credit report is required as well when qualifying a business. The Board publishes no minimum net worth or working capital figure for this class: Rule 61G4-15.006 sets none, and s. 489.115(5)(b) only caps what the Board could require. Ask the Customer Contact Center at 850-487-1395 before assuming a dollar threshold applies..
  10. 10Insurance. Carry the required insurance. Public liability insurance of $100,000 and property damage insurance of $25,000 (the 'all other categories' figures on the Board's applications), plus workers' compensation coverage or a filed exemption.
  11. 11Other. Examination covering the Florida Building Code: NASCLA applicants attest on the application to having passed one, and applicants using the 10-year endorsement option provide proof of a board-approved 2-hour Florida Building Code course including wind mitigation techniques.
  12. 12Continuing education. Complete continuing education (if applicable). 14 hours of continuing education each renewal cycle, with mandatory hours in workplace safety, workers' compensation, business practices, building code and laws and rules. Certified licenses expire August 31 of every even-numbered year..

Published fees on this path total $765, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Trade exam · if applicable
  • Law / code exam
  • Exam fee · $135
  • Exam fee · $80

Business registration

If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.

  • Business license · $50 · if applicable

Liability insurance

Some states require proof of general liability or workers' compensation coverage at licensing time.

  • Insurance

Continuing education

Renewals usually need approved CE hours, often on the latest NEC. Reciprocal licensees are rarely exempt.

  • Other
  • Continuing education · if applicable

How Florida licenses residential contractors

Florida residential contractor · “Certified Residential Contractor (CR)

State license plus local requirements

Verified September 17, 2026· 6 sources

Issued by Florida Construction Industry Licensing Board (Department of Business and Professional Regulation)

Florida's homes-only tier is the Certified Residential Contractor (occupation code CR), issued by the Construction Industry Licensing Board within DBPR. Section 489.105(3)(c), F.S. limits the class to construction, remodeling, repair or improvement of one-, two- or three-family residences not exceeding two habitable stories above no more than one uninhabitable story, plus accessory structures. Florida licenses the person: an individual qualifies by experience and examination, receives a certificate of competency, and then files a separate application to qualify a business organization, so a contractor moving to Florida applies in their own name first. Florida runs two tracks at every level: a certified contractor holds a department certificate of competency and may contract in any jurisdiction in the state, while a registered contractor (code RR) has satisfied a county or city competency board instead and may contract only in the jurisdictions that granted that competency. Out-of-state applicants almost always want the certified license, because it is statewide and is the only track the Board's reciprocity and endorsement applications lead to.

How local licensing works in Florida

Why this level is Hybrid. Under s. 489.105(8) and (10), F.S., DBPR both certifies contractors statewide and registers contractors who qualified through a local licensing board, and a registered contractor 'may contract only in such jurisdictions'. The board's own application list therefore carries paired occupation codes for every Division I class: CR and RR for residential, CB/RB for building, CG/RG for general. The local route exists in the larger counties, and a state certificate makes it unnecessary.

Miami-Dade County. The Construction Trades Qualifying Board licenses Building, Building Specialties, Electrical, Maintenance, Mechanical and Plumbing contractors under Chapter 10 of the county code. It reciprocates only with Broward and Palm Beach counties in specific trade categories, and requires at least 75 percent on journeyman exams and 70 percent on other reciprocal category exams. Separately, Miami-Dade offers state-certified contractors a voluntary registration that speeds up permit applications in unincorporated Miami-Dade by pre-verifying license status and insurance.

Broward County. The Building Code Division's Central Examining Boards issue county Certificates of Competency; the applications, examining board calendar and descriptions of mandatory and voluntary certifications are published in the county's contractor packet (954-765-4400 x9876).

Out-of-state applicants. No county program reviewed publishes a rule that recognizes an out-of-state contractor license. Reciprocity and endorsement are state routes on Forms CILB 32 and CILB 10, and the license they produce is valid in every Florida jurisdiction.

Moving to FloridaLeaving Florida

Why Kentucky has nothing to transfer

Kentucky residential contractor · “Building or residential contractor license or registration (city- or county-issued)

Licensed by cities and counties

Verified September 17, 2026· 14 sources

Issued by No state authority; cities and counties license or register residential building contractors

Kentucky issues no statewide residential building, home builder or home improvement contractor license, so an out-of-state residential builder has nothing at state level to transfer and no state reciprocity to apply for. What Kentucky does license is the trades: the Department of Housing, Buildings and Construction (HBC) says on its own home page that it "licenses/certifies plumbers, electricians, boiler contractors, sprinkler and/or fire alarm contractors and building inspectors", and its administrative regulations in Title 815 add heating, ventilation and air conditioning licensing, elevator safety, boilers and pressure vessels, manufactured homes and home inspectors. Anyone self-performing plumbing, electrical, HVAC, boiler or fire-protection work in Kentucky needs the matching HBC license whatever the local building rules say, and that is where the state-level reciprocity conversation belongs. Housing work itself is licensed jurisdiction by jurisdiction and the rules differ sharply: Louisville Metro issues a Building Type A - Residential contractor license with six hours of continuing education before each renewal, Lexington-Fayette registers a "general contractor, residential only" class under its Contractors Registration Ordinance, and the joint Bowling Green - Warren County Contractors Licensing Board issues a General Contractors License for remodeling and building. Owensboro and Covington sit at the other end: neither publishes a contractor competency license at all, and a builder there files an occupational business license and carries insurance instead. None of these credentials involves a trade or business-law exam, and none of them gives any weight to a license held in another state, so the practical work is registering in each place where permits will be pulled and carrying the insurance each one demands.

How local licensing works in Kentucky

How local licensing works. No Kentucky agency licenses residential builders or remodelers, and there is no state qualifying party, no state exam and no state reciprocity for this work. Each city and county decides for itself, so identify the building department with jurisdiction over the address before applying anywhere. A credential issued by one Kentucky jurisdiction does not carry into the next one, and none of the jurisdictions below grants anything for a license held in another state. Two statewide obligations apply wherever the project is: the HBC license for any self-performed plumbing, electrical, HVAC, boiler or fire-protection work, and compliance with the Kentucky Building Code adopted in 815 KAR Chapter 007.

Louisville Metro (Jefferson County). The Office of Construction Review issues the contractor licenses for the merged city-county. A builder chooses a term and then a scope. License A "lets you work on one or more permitted projects during a calendar year, which runs from January 1st to December 31st"; License B "allows you to work on only one permitted project during a calendar year." The scopes are Building A-Residential, Building A-Residential/Commercial, Building A-Commercial and Building B. Building Type A costs $125 a year and Building Type B $50 per permit, and "only one Building Type B license will be granted per person/company per renewal year." Six continuing education credit hours from a pre-approved list are required before renewal for Building A-R, Building A-RC and Building B, which is to say for everyone whose scope touches houses. The filing is a certificate of liability insurance naming the Office of Construction Review as certificate holder, workers' compensation and unemployment insurance or a signed and notarized affidavit that neither applies, an Occupational License Number from the Revenue Commission of Jefferson County on (502) 574-4860, and the application itself through the Metro business portal. Annual renewals must arrive with current liability insurance, the continuing education records for residential contractors, a workers' compensation form and a subcontractor list, and "any missing items will result in ALL items being returned." There is no exam, no experience requirement and no bond on the building categories; only the wrecking classes carry a written exam, a surety bond and a year of supervisory experience. Office of Construction Review, 444 S. 5th St., Suite 100, (502) 574-3321.

Lexington-Fayette Urban County. The Division of Building Inspection runs a Contractors Registration Ordinance: "this ordinance requires all contractors to register with the Building Inspection" and "unregistered contractors cannot obtain building permits." There are three classes under Ordinance 5-90(a). A general contractor, residential only "constructs up to 4-family homes (4-Plex), performs home remodeling, and may supervise, arrange, and/or perform more than two unrelated building trades or crafts." A general contractor covers everything larger. A specialty contractor "performs commercial, industrial, public works and residential construction and specializes in two or fewer unrelated building trades or crafts." Registration takes four steps: a $10 Home Office Certificate or a $25 Certificate of Occupancy if the business address is in Fayette County; an occupational business license from Revenue at 218 E. Main St., 2nd floor, (859) 258-3340; general liability insurance and workers' compensation with LFUCG as certificate holder, or the "Workers Comp Exempt" declaration on the application if neither applies; and the online Contractor Registration Application through the city's permitting portal with the occupational license and certificate of insurance uploaded. No exam, experience or bond is required for any of the three classes. The division's published fee schedule prices permits rather than registrations and lists no contractor registration fee, so ask Building Inspection for the current amount before filing. 101 E. Vine St., (859) 258-3770, [email protected].

Bowling Green and Warren County. A single joint Contractors Licensing Board licenses for both the city and the county under Ordinance 91-58 WC and Ordinance 91-25 BG. A General Contractors License is needed by anyone "doing any type of general contract work in Bowling Green / Warren County including pulling permits for building or remodeling, construction management, or if you would have two or more subcontractors per job", and costs $250. A Specialty Contractors License covers subcontract work or a job with at most one subcontractor, and costs $100. Both fees are non-refundable and renewals are annual, pro-rated for a mid-year filing. The filing is the application plus a certificate of insurance naming the board as certificate holder, with "a minimum requirement for General Liability Insurance [of] $100,000 per occurrence", workers' compensation coverage shown on the certificate or a notarized Affidavit of Exemption, and a notarized Partnership Agreement for a partnership. Licenses are non-transferable and "any change in ownership nullifies previous licenses." There is no exam and no experience review, and the board says so directly: "the Contractors Licensing Board does not warrant that you are otherwise qualified to perform your trade or specialty by the issuance of its license." A Bowling Green occupational license is also needed for work inside the city limits and a Warren County occupational license for work outside them. Contractors Licensing Board, 1141 State Street, Suite 200, 270-781-3530.

Owensboro and Daviess County. There is no Owensboro contractor license. The Owensboro Metropolitan Planning Commission's Building & Electrical Division "issues all building and electrical permits required by the Kentucky Building Code and National Electrical Code" for Owensboro-Daviess County, along with HVAC, sign and parking lot permits and certificates of occupancy, and it issues no contractor credential of any kind. What a builder needs instead is the city's business registration: "any person, partnership, corporation, or other legal entity must register with the Occupational License Division prior to conducting business inside the city limits", with "a minimum license fee of seventy-five ($75.00) dollars due with registration." New construction draws at least three field inspections - footer and foundation, framing and final - before a certificate of occupancy issues. Occupational License Division, 101 East 4th Street, 270-687-5600.

Covington and Kenton County (Northern Kentucky). Planning and Development Services of Kenton County is the building department for Covington and the surrounding communities, and its rule is short: "when completing work within Kenton County, all contractors must obtain and maintain a Kenton County occupational license and provide proof of Kentucky workers' compensation insurance coverage. In addition, the Kentucky Department of Housing, Buildings, and Construction requires a license for electrical, HVAC, plumbing, and fire suppression work. Contractors must provide copies of all these items before any permits can be issued." There is no residential builder license, exam or bond. In Covington itself a zoning permit from the city, and a certificate of appropriateness where a historic preservation overlay applies, must come before PDS will issue the building permit. PDS, 1840 Simon Kenton Way, Suite 3400, Covington, 859-331-8980; building permits 859-957-2408.

Storm-damaged communities. The Attorney General's Office of Consumer Protection runs joint emergency contractor registration programs with the City of Mayfield and Graves County, the City of Princeton and Caldwell County, the City of Dawson Springs and Hopkins County, and the City of Bremen and Muhlenberg County, "to register contractors looking to assist storm victims." The program "requires contractors to register prior to doing business", and registrants are issued placards that must be displayed on the job site and in the vehicle. It is a consumer-protection registration aimed at transient storm-chasers rather than a skill license, and it applies only in those communities. Details on (502) 871-2424.

Everywhere else. The remaining Kentucky cities and counties each set their own rules, from a full licensing board like Bowling Green's to nothing beyond an occupational license and proof of insurance. Ask the local building department what it requires before bidding, and expect to repeat the filing in each jurisdiction.

Moving to KentuckyLeaving Kentucky

Common questions

Do I have to take the Florida residential contractor exam if I'm licensed in Kentucky?
The trade exam is waived, but Florida requires a law or code exam.
How long do I need to have held my Kentucky license?
At least 10 years before applying.
What does it cost to get a Florida residential contractor license from Kentucky?
Published fees on this path total $765, not counting exam vendor fees or bonds.
Do my Kentucky work hours count in Florida?
Yes. Documented out-of-state experience counts toward Florida's eligibility requirements.
Does it work the other way, from Florida to Kentucky?
Not necessarily. Reciprocity is directed. Going from Florida to Kentucky, the mechanism is not applicable.

Sources

  1. Broward County Building Code Division - Get a License (Central Examining Boards) · Broward County Building Code Division · Agency Page · verified September 17, 2026
  2. DBPR Construction Industry - Frequently Asked Questions · Florida Department of Business and Professional Regulation · Faq · verified September 17, 2026
  3. DBPR - Construction Industry Licensing Board (CILB) home page · Florida Department of Business and Professional Regulation · Agency Page · verified September 17, 2026
  4. CILB Reciprocity list (states with reciprocal licensing agreements) · Fla. Stat. § 489.115(3)(c) · Florida Construction Industry Licensing Board · Agreement Document · verified September 17, 2026
  5. Form DBPR CILB 10 - Application for Certification by Endorsement (Eff. June 2024) · Fla. Stat. § 489.115(3); Rule 61-35.010, F.A.C. · Florida Department of Business and Professional Regulation · Form · verified September 17, 2026
  6. Form DBPR CILB 32 - Application for Certification by Reciprocity (Eff. July 2024) · Fla. Stat. § 489.115(3)(c); Rule 61-35.010, F.A.C. · Florida Department of Business and Professional Regulation · Form · verified September 17, 2026
  7. DBPR Bureau of Education & Testing - Florida State Construction Examination Registration Instructions and Application 2026 (Professional Testing, Inc.) · Rule 61G4-16, F.A.C. · Florida Department of Business and Professional Regulation / Professional Testing, Inc. · Form · verified September 17, 2026
  8. Miami-Dade County - Contractors & Building Trades (Construction Trades Qualifying Board) · Miami-Dade County Department of Regulatory and Economic Resources · Agency Page · verified September 17, 2026
  9. Rule 61G4-12.009, F.A.C. - Fees · Rule 61G4-12.009, F.A.C. · Florida Construction Industry Licensing Board · Admin Rule · verified September 17, 2026
  10. Rule 61G4-15.006, F.A.C. - Financial Responsibility and Financial Stability, Grounds for Denial · Rule 61G4-15.006, F.A.C. · Florida Construction Industry Licensing Board · Admin Rule · verified September 17, 2026
  11. Florida Statutes s. 489.105 - Definitions (Part I, Construction Contracting) · Fla. Stat. § 489.105(3)(a)-(c), (8), (10) · Florida Legislature · Statute · verified September 17, 2026
  12. Florida Statutes s. 489.111 - Licensure by examination · Fla. Stat. § 489.111(2) · Florida Legislature · Statute · verified September 17, 2026
  13. Florida Statutes s. 489.115 - Certification and registration; endorsement; reciprocity · Fla. Stat. § 489.115(3), (5) · Florida Legislature · Statute · verified September 17, 2026
  14. NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related