Missouri to North Carolina: general contractor license reciprocity
Missouri does not issue a statewide general contractor license, so there is nothing to transfer. Here is North Carolina's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
NASCLA Accredited Examination in place of the North Carolina Building Contractor examination
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
North Carolina does not recognize an out-of-state general contractor license on its own, but it does accept the NASCLA Accredited Examination for Commercial General Building Contractors in place of its own Building Contractor trade examination. That route is open to anyone regardless of which state licensed them: sit the NASCLA examination before applying, then file the North Carolina application with the NASCLA pass letter and transcript purchase receipt attached and take the North Carolina Business and Law examination. Everything else still applies in full, including the financial responsibility figure for the limitation requested, the background check, character references and entity registration. An applicant who does not hold the NASCLA credential and comes from a state without a waiver agreement simply takes the North Carolina Building Contractor examination instead: 90 questions, 200 minutes, 70% to pass. North Carolina requires no trade experience for licensure, so out-of-state years do not shorten any step.
The Board confirms NASCLA acceptance on its own contractor FAQ and in 21 NCAC 12A .0303(c), which names the NASCLA examination alongside an origin state examination as the qualifying exam. The FAQ states acceptance for the Building classification; it does not say the NASCLA examination is accepted for the Residential classification. The NASCLA examination is bought and scheduled from NASCLA, not from the Board or PSI, and it is taken before the North Carolina application is filed. Without NASCLA and without a waiver agreement, substitute the North Carolina Building Contractor examination for the waived trade examination below; the Business and Law examination is then part of that classification examination rather than a separate sitting.
At a glance
- Trade exam
- Waived
- Law / code exam
- Required
- Out-of-state hours
- Do not count
What you must already have
- You must have passed a licensing exam in Missouri that the destination considers comparable.NASCLA Accredited Examination for Commercial General Building Contractors, passed before the North Carolina application is filed. The Board asks for the NASCLA pass letter and the transcript purchase receipt to be attached to the application.
- The qualifier is at least 18 years old and possesses good moral character as determined by the Board (G.S. 87-10). North Carolina sets no minimum trade experience or apprenticeship hours for a general contractor license.
What you'll do to get licensed in North Carolina
- 1Law / code exam. Pass a law, rules, or code exam. North Carolina Business and Law examination: 40 questions, 90 minutes, 70% to pass, covering erosion and sedimentation control, licensing, liens, contracts, project management, safety and business practices. Required of applicants who qualify on the NASCLA examination rather than the North Carolina Building Contractor examination..
- 2Trade exam. Pass the destination's trade exam (if applicable). Not required if the NASCLA Accredited Examination has been passed. Otherwise the North Carolina Building Contractor examination applies: 90 questions, 200 minutes, 70% to pass, open book, administered by PSI Services LLC after the Board issues an eligibility letter..
- 3Application fee. Pay the application fee ($75). Nonrefundable application fee set by the limitation requested: $75 for a limited license, $100 for an intermediate license and $125 for an unlimited license (G.S. 87-10(a1); 21 NCAC 12A .0304(a)). The amount shown is the limited-license fee..
- 4Exam fee. Pay the exam fee ($79). $79 per examination, paid to PSI Services LLC when the examination is scheduled. The NASCLA examination itself is bought from NASCLA and is not covered by this fee..
- 5Financial responsibility. Show financial responsibility of at least $17,000. Evidence of financial responsibility for the entity that will hold the license. Current assets must exceed current liabilities by at least $17,000 for a limited license (or total net worth of at least $80,000), $75,000 for an intermediate license, or $150,000 for an unlimited license. Intermediate and unlimited applicants must show the figure in an agreed-upon procedures report on the Board form or an audited financial statement prepared by a CPA or independent accountant. Statements must be no more than twelve months old and conform to GAAP (21 NCAC 12A .0204). The amount shown is the limited-license working capital figure..
- 6Surety bond. Post a surety bond ($175,000) (if applicable). Optional alternative to the working capital or net worth figure: a continuous surety bond of $175,000 for a limited license, $500,000 for an intermediate license or $1,000,000 for an unlimited license, from a surety authorized in North Carolina and rated Superior or Excellent by A.M. Best. Proof is filed with the application and with every annual renewal, and the bond must stay in force until the licensee can show the required working capital (21 NCAC 12A .0204(e))..
- 7Background check. Complete a background check. Criminal background check through the third-party vendor the Board names, paid directly to the vendor. Every qualifier submits to the check, along with the sole proprietor, the president of a corporation, all managers and members of an LLC, or all partners of a partnership (21 NCAC 12A .0303(b))..
- 8Business license. Obtain a business license. The license is issued to a legal entity, so the individual, corporation, LLC or partnership that will contract must be formed and, if organized outside North Carolina, authorized to transact business in the State before the license is issued (G.S. 87-10.1)..
- 9Insurance. Carry the required insurance (if applicable). The Board states there is no insurance or bonding requirement for a general contractor license itself. North Carolina workers compensation law still applies to the business independently of licensure, and owners, lenders and general contractors commonly require general liability coverage by contract..
- 10Continuing education. Complete continuing education. Renewal condition rather than an entry requirement: at least one qualifier on a building, residential or unclassified license must complete eight hours of Board-approved continuing education each year, made up of a two-hour mandatory course and six elective hours, with up to four elective hours carried forward (G.S. 87-10.2)..
- 11Other. Letters of character reference required by 21 NCAC 12A .0303(a)(9) and .0308, certified copies of court records for any criminal convictions of the applicant or its qualifiers, and disclosure of disciplinary history with this or any other licensing agency..
Published fees on this path total $154, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Law / code exam
- Trade exam · if applicable
- Exam fee · $79
Surety bond
A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.
- Surety bond · $175,000 · if applicable
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Business license
Liability insurance
Some states require proof of general liability or workers' compensation coverage at licensing time.
- Insurance · if applicable
Continuing education
Renewals usually need approved CE hours, often on the latest NEC. Reciprocal licensees are rarely exempt.
- Continuing education
How North Carolina licenses general contractors
North Carolina general contractor · “General Contractor, Building classification (Limited, Intermediate or Unlimited)”
Statewide license
Issued by North Carolina Licensing Board for General Contractors
The unlimited tier in North Carolina is the Building classification of the General Contractor license, issued by the North Carolina Licensing Board for General Contractors and required for any single undertaking costing $40,000 or more. The Building classification covers all building construction and demolition, commercial, industrial, institutional and residential alike, plus parking decks, site work and paving, storm drainage, retaining walls, recreational facilities and a list of specialty categories including concrete, masonry, roofing, metal erection, interior construction, swimming pools and asbestos. The Board also issues Highway, Public Utilities and Specialty classifications for work outside building construction, and separate North Carolina boards license the electrical, plumbing, heating and fire sprinkler trades. As with every classification, the license is held by a business and qualified by a named individual who passes the examination, and it carries a monetary limitation: Limited up to $750,000 per project, Intermediate up to $1,500,000, and Unlimited with no project cap, each set by the working capital, net worth or surety bond the applicant can show. North Carolina accepts the NASCLA Accredited Examination for this classification, and it holds examination waiver agreements with a short list of named states, but the Board states it does not have full reciprocity with any state.
Why Missouri has nothing to transfer
Missouri general contractor · “Class A or B general contractor / construction business license (city-issued)”
Licensed by cities and counties
Issued by No state authority; cities and counties license or register commercial building contractors
Missouri has no statewide general, commercial or unlimited building contractor license, so there is nothing at state level for an out-of-state general contractor's license to transfer into and no NASCLA route to take, because Missouri is not a NASCLA participating state. Title XXII of the Revised Statutes, which contains every occupational licensing chapter, has no contractor or builder chapter, and the Division of Professional Registration regulates only one construction trade, electrical contractors. That voluntary statewide electrical contractor license under RSMo 324.900 to 324.945 is often mistaken for a general contractor credential; it is not. Its statutory definitions reach electrical contracting alone, and RSMo 324.925, which forces every city and county to honor it and bars them from testing a holder's proficiency, applies to electrical work only and expressly leaves local building regulation untouched. Commercial building is therefore governed city by city, and only one of Missouri's larger jurisdictions examines commercial builders: Independence issues Class A and Class B general contractor licenses to individuals on an ICC or Prometric score, a reciprocal license or a construction-related degree. Kansas City runs seventeen contractor license categories and none of them is a commercial building contractor - its own bulletin says a business license for construction "is the only city license required" for commercial building permits - and St. Louis City, St. Louis County, Springfield, Columbia and Jefferson City likewise license the trades and ask a commercial builder for nothing more than a business license.
How local licensing works in Missouri
How it works in Missouri. No Missouri agency licenses general, commercial or unlimited building contractors, and there is no state qualifying party, no state business-and-law exam and no NASCLA acceptance to rely on. Cities and counties control commercial construction through the building permit, and almost all of them regulate the electrical, mechanical, plumbing and fire trades rather than the builder. The one statewide rule worth knowing is RSMo 324.925: a political subdivision must recognize the state's voluntary electrical contractor license in place of its own and may not test that holder's electrical proficiency, on pain of having its local sales tax distributions withheld. The statute is limited to electrical contracting - it creates no equivalent obligation for builders, and it expressly preserves each subdivision's power to implement codes, require business licenses, issue permits and inspect work. So a general contractor arriving in Missouri qualifies separately in each jurisdiction, and the only genuinely portable credential is a passing score on a national contractor examination, which matters in exactly one of the places below.
Independence. The clearest commercial program in the state, and the only one of the seven that examines a commercial builder. The city licenses the individual rather than the business - "contractor licenses belong to the licensed individual, NOT a company" - and the general contractor license "covers framing, footings, and general construction" in three classes: Class A, residential and commercial; Class B, residential and commercial up to three stories; Class C, residential only. Qualification is ICC or Prometric test scores from within the last five years at 75 percent or better, or "a current, active license with a jurisdiction that we reciprocate with," which the city defines as "any jurisdiction that issues licenses in a similar fashion," or a bachelor's degree in engineering, architecture or construction science from an accredited college or university. Only a master license holder may apply for or be named on a building permit; journeymen may not. Licenses expire December 31 annually with no proration, and a business license is required in addition. [email protected], (816) 325-7401.
Kansas City. City Planning & Development enforces Article XII of the Kansas City Building and Rehabilitation Code through seventeen categories of contractor license - demolition, electrical, elevator, fire protection, gas-fired appliance, mechanical, pipe fitting, plumbing, residential building and sign - and there is no commercial or general building category among them. The city says so directly in its residential licensing bulletin: "a Business License for Construction is the only city license required for a contractor performing swimming pool construction, uncovered deck construction, retaining walls, non-structural remodeling, installation of roof mounted solar panels with no or limited structural work, and commercial building permits." A commercial builder therefore buys the business license from the Finance Department, keeps a current Missouri Secretary of State registration, and makes sure each licensed trade on the job holds its own Kansas City contractor license and employs a certificate-of-qualification supervisor. Where the general contractor self-performs a regulated trade, the full route applies: a $60.00 certificate application with notarized reference letters and a recognized exam score, applicant at least 21 with a high school diploma or GED and documented experience, then a $60.00 application and $181.00 issuance fee for the company license, renewed quadrennially at $181.00. [email protected], (816) 513-1500.
St. Louis City. The Building Division runs four boards of examiners - the Committee of Electrical Examiners, the Mechanical Contractors Board of Examiners, the Plumbers and Drainlayers Board of Examiners and the Sprinkler System Contractors Board of Examiners - and none of them covers building contractors. A commercial general contractor takes out a construction or contracting business license from the License Collector: state tax number, application, clearance from the Collector of Revenue, an occupancy permit from the Building Division, and proof of workers' compensation coverage or a signed statement that it is not legally required. "All general contractors are required to furnish a list of the sub-contractors on any job to the License Collector." There is no exam, bond or experience review. Building Division, City Hall Room 425, 1200 Market St., (314) 622-3313.
St. Louis County. "The County does not license general contractors." It "does verify that out-of-state contractors are registered with the state," and it "does register all repair contractors that obtain permits for repairs from a natural disaster such as a flood or severe storm." Its licensing effort goes into the trades: electrical, mechanical (four contractor categories under the county Mechanical Code, chapter 1108 SLCRO) and plumbing, each with a licensing board, and "the County only issues trade permits to licensed contractors." Commercial permits for unincorporated county land come from Transportation and Public Works at 41 South Central Ave., 6th Floor, Clayton, 314-615-5184; inside the county's many municipalities, check the city's own building department too.
Springfield. A permit will not issue until "a City-licensed General Contractor (GC) or Trade Master (TM)" is named on it, so the general contractor credential is compulsory - but it is a business license from the License Division rather than a tested qualification. The city's examining program covers electricians, plumbers, gas fitters and mechanical craftsmen only, who must be "tested and certified to afford competence and knowledge of the codes" and who may present an identical Prometric, Experior, Block or ICC examination passed at 75 percent or better in another jurisdiction. Contractors file proof of workers' compensation or sign a notarized exemption statement. Permit desk 417-864-1585; License Division 417-864-1617.
Columbia. Building and Site Development certifies trades only - Trade Apprentice, Electrical, Mechanical and Plumbing - with tests "administered by a private testing firm according to a regular schedule," and the city maintains boards of electrical, plumbing and mechanical examiners but none for builders. A commercial contractor holds a city business license at $0.25 per $1,000 of gross receipts, minimum $75 and maximum $10,000 a year, plus a $45 application fee, and files a certificate of workers' compensation insurance if it has one or more employees. Business License Division 573-874-7378.
Jefferson City. "All contractors performing work in Jefferson City must have a local license," but only "electrical and plumbing contractors and their employees are required to obtain specific trade licenses directly from the Building Regulations Division"; "all other contractors are directed to the Business License Division to obtain their business license." A commercial builder files for the business license and sits no examination. Building Regulations (573) 634-6410, Business License Division (573) 634-6322.
Everywhere else. Other Missouri cities and counties write their own ordinances, and outside city limits many rural counties have no building permit program at all. Before bidding, ask each jurisdiction whether it licenses builders or only the trades, whether it will accept an ICC or Prometric score in place of its own test, and what business license, workers' compensation proof and insurance it requires. Expect to hold a separate credential in every jurisdiction where you pull permits.
- Independence (Community Development - Class A and Class B general contractor licenses, exam or reciprocal license required)
- Kansas City (City Planning & Development - no commercial building contractor license; business license for construction)
- St. Louis City (License Collector - construction/contracting business license; Building Division examines trades only)
- St. Louis County (no general contractor license; electrical, mechanical and plumbing licensing only)
- Springfield (Building Development Services - City-licensed General Contractor must be named on the permit)
- Columbia (Building and Site Development - trade certifications only; contractors hold a city business license)
- Jefferson City (Building Regulations Division - electrical and plumbing licensed; all other contractors take a business license)
Common questions
- Do I have to take the North Carolina general contractor exam if I'm licensed in Missouri?
- The trade exam is waived, but North Carolina requires a law or code exam.
- What does it cost to get a North Carolina general contractor license from Missouri?
- Published fees on this path total $154, not counting exam vendor fees or bonds.
- Do my Missouri work hours count in North Carolina?
- No. North Carolina does not credit out-of-state hours on this path.
- Does it work the other way, from North Carolina to Missouri?
- Not necessarily. Reciprocity is directed. Going from North Carolina to Missouri, the mechanism is not applicable.
Sources
- NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
- N.C.G.S. 87-10 - Application for license; examination; certificate; renewal · N.C.G.S. 87-10(a), (a1), (b), (c), (c1), (e) · North Carolina General Assembly · Statute · verified September 17, 2026
- N.C.G.S. 87-15.1 - Reciprocity of licensing · N.C.G.S. 87-15.1 · North Carolina General Assembly · Statute · verified September 17, 2026
- Classifications and limitations - NC Licensing Board for General Contractors · North Carolina Licensing Board for General Contractors · Agency Page · verified September 17, 2026
- FAQ for Contractors - NC Licensing Board for General Contractors · North Carolina Licensing Board for General Contractors · Faq · verified September 17, 2026
- Laws and Regulations Applicable to General Contracting in the State of North Carolina (2026 edition) · 21 NCAC 12A .0202, .0204, .0303, .0304, .0402, .0403, .0404 · North Carolina Licensing Board for General Contractors · Admin Rule · verified September 17, 2026
- License applicants - NC Licensing Board for General Contractors · North Carolina Licensing Board for General Contractors · Agency Page · verified September 17, 2026
- Licensure Application Questions - License Type Selector (online application preview) · North Carolina Licensing Board for General Contractors · Form · verified September 17, 2026
- State of North Carolina Licensing Board for General Contractors - Candidate Information Bulletin · PSI Services LLC for the North Carolina Licensing Board for General Contractors · Other · verified September 17, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.