New York to New Mexico: general contractor license reciprocity
New York does not issue a statewide general contractor license, so there is nothing to transfer. Here is New Mexico's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
GB-98 trade exam waived on the NASCLA Accredited Examination (every state)
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
New Mexico runs no named-state contractor reciprocity: the only reciprocity the Construction Industries Division publishes is for the EE-98J electrical journeyman certificate, and holding another state's general contractor license is worth nothing on its own here. What CID does accept, from an applicant in any state, is the NASCLA Accredited Examination. Under 14.6.3.8(G)(2)(f) NMAC the bureau chief may waive the state-specific written trade exam for a Qualifying Party who passed the NASCLA general construction accredited examination, and CID's own Qualifying Party application limits that waiver to the GB-98 and EE-98 classifications, so at this level a NASCLA pass replaces the two-part GB-98 exam. Three things come with it: the candidate must have used the NASCLA scores to obtain a license in another state and held that license for at least a year, must attach a letter of good standing from that state, and must release the NASCLA transcript to New Mexico from the NASCLA website rather than sending a copy. Nothing else is waived. The four years (8,000 hours) of foreman-level experience, at least two of them commercial, must still be documented on notarized affidavits, the Business and Law exam or approved course still applies, and the company still files the bond, the tax registration certificate and the entity paperwork. An applicant without a NASCLA pass simply sits the GB-98 exam.
The rule says the bureau chief 'may waive' the trade exam, and CID verifies the NASCLA transcript itself after PSI accepts the application and the experience; if CID denies the waiver the applicant is contacted and registered for the full exam sequence, so do not stop studying while the transcript is being checked. The NASCLA waiver is not open at the GB-2 residential level. Out-of-state experience counts in full toward the 8,000 hours where it was gained working for a contractor licensed in the trade or was legal work in the state where it was performed, and an out-of-state contractor signing the affidavit attaches a copy of their current state license; accredited training counts at one-half year per year up to half the requirement, and estimating, project management and supervision do not count as hands-on. Once PSI approves the application, all remaining requirements must be met within six months or the fees are forfeited, exam scores are good for one year, and the trade and Business and Law results must be within a year of each other. NMSA 60-13-14(C) allows the division, with the commission's consent, to enter reciprocal licensing agreements with states having equivalent requirements; no such agreement covering a building classification has been published, so ask the Construction Industries Division before assuming one exists.
At a glance
- Trade exam
- Waived
- Law / code exam
- Required
- Out-of-state hours
- Count toward eligibility
What you must already have
- You must have passed a licensing exam in New York that the destination considers comparable.14.6.3.8(G)(2)(f) NMAC lets the bureau chief waive the state-specific written trade exam for a Qualifying Party who passed the NASCLA general construction accredited examination at the passing score, and CID's Qualifying Party application states the waiver is 'Applicable for Qualifying Party's applying for GB98 & EE98 ONLY' and that it 'removes the trade exam requirement ONLY'. The transcript must be released to New Mexico through the NASCLA website; CID verifies it directly. NASCLA is an exam credential rather than a license or an agreement between states, so it is available to a candidate from any state, and it waives no fee, bond, insurance, entity or experience requirement.
- You must have held your New York license for at least 1 year.CID's Qualifying Party application requires that the candidate 'must have taken the exam, used scores to obtain a license in another state, and held that license for a minimum of one year'. A NASCLA pass that was never used to obtain a license, or a license held for less than a year, does not support the waiver.
- Your New York license must be active and in good standing.
- You must document at least 8,000 hours of qualifying work experience.Four years (8,000 hours) of foreman-level practical or related trade experience within the ten years immediately before application, of which at least two years must be commercial experience (14.6.6.9(B)(2) NMAC; NMSA 60-13-14(B)(8)). It is documented on notarized General Building Work Experience Verification affidavits, one per employer or affiant, completed by an employer, supervisor, foreman or other contractor, and the affidavit must say whether the experience was residential or commercial. The NASCLA waiver does not reduce it.
- Experience must have been gained while employed by a contractor licensed in the trade being applied for, or be work that was legal in the state where it was performed. An out-of-state contractor certifying the experience attaches a copy of their current state license to the affidavit; where that state does not license the trade, proof that the company was active and valid is attached instead.
What you'll do to get licensed in New Mexico
- 1Application fee. Pay the application fee ($30). Non-refundable Qualifying Party application fee, paid to PSI with the notarized application, the work-experience affidavits and, for a NASCLA waiver, the letter of good standing from the licensing state. Complete packets go to the PSI Albuquerque office by hand or mail; faxed and emailed forms are not accepted..
- 2Other. Qualifying Party certificate fee, charged for each classification on the application (14.5.5.14(A) NMAC). With the $30 application fee this is the $36 the Construction Industries Division quotes for a single-classification Qualifying Party filing. ($6).
- 3Trade exam. Pass the destination's trade exam (if applicable). GB-98 General Building Contractor exam, required only where the NASCLA waiver is not used or is not granted. It is a two-part test administered by PSI: Part 1 is the GB-2 Residential Building Contractor paper, 80 questions in 225 minutes, and Part 2 is the commercial paper, 100 questions in 310 minutes, both open book and both needing 75% to pass. Part 2 covers sitework, concrete, masonry, carpentry, metals, roofing, associated trades, general code, plan reading and estimating, and OSHA safety against the 2021 New Mexico Commercial Building Code (14.7.2 NMAC) and the 2021 International Building Code. Both parts must be passed; a candidate who fails one part retakes only that part..
- 4Exam fee. Pay the exam fee ($269.06). PSI fee for the two-part GB-98 exam taken as a combination, which includes the GB-2 paper. A single part costs $134.53 as a retake. A candidate whose NASCLA waiver is approved pays no trade exam fee..
- 5Law / code exam. Pass a law, rules, or code exam. Contractor's Business and Law exam, required of all new Qualifying Party candidates and never waived by the NASCLA route: 50 questions, 130 minutes, open book, 75% (38 points) to pass, covering licensing requirements, estimating and bidding, business organization and financial management, tax and labor law, project management and lien law, contracts, risk management, and environment and safety. An approved Business and Law course taken with a CID-approved vendor may be completed in place of the exam, and an individual who is already an active Qualifying Party does not repeat it when adding a classification..
- 6Exam fee. Pay the exam fee ($68.88). PSI fee for the Business and Law exam..
- 7Contractor license. Hold or obtain a contractor license ($30). Non-refundable contractor license application fee paid to PSI by the business, filed with the notarized Contractor License Application, a copy of the Qualifying Party's certificate or passing score reports, and the Business and Law score or course certificate. A $6 certificate fee covering the license certificate and two wallet cards is charged with it..
- 8License fee. Pay the license or certificate fee ($300). Classification fee for GB-98, covering the full three-year license term on PSI's current schedule. Adding a GS specialty classification alongside it does not raise the total above $300 for the category. Late renewal costs $1 a day for the first 30 days and the equivalent of one year's fee from 30 to 90 days; after 90 days the license is cancelled and the business must reapply..
- 9Surety bond. Post a surety bond ($10,000). $10,000 code bond from a corporate surety authorized to transact business in New Mexico, issued in the exact name shown on the application and effective for the entire three-year license period. It is the statutory proof of responsibility, may be drawn on only to cure division-certified code violations the licensee has not corrected, and must be kept in force for the whole term; claims are limited to two years after final inspection or issuance of a certificate of occupancy. New Mexico sets no net worth, working capital or financial statement test for a contractor license..
- 10Insurance. Carry the required insurance. Workers' compensation coverage is required of every licensed entity, and failure to maintain it is cause for revocation of the license. A sole proprietor with no employees may be exempt; the Workers' Compensation Administration can confirm. An application is placed on hold while the applicant is out of compliance. CID does not require a general liability policy for the license itself, though owners and general contractors normally require one by contract..
- 11Business license. Obtain a business license. A registration certificate issued within the last twelve months by the New Mexico Taxation and Revenue Department in the exact name on the license application, plus proof of registration with the New Mexico Public Regulation Commission for a corporation or LLC, or with the Secretary of State for a limited liability partnership or limited partnership. A corporation, LLC, LP or LLP must be legally authorized to do business in New Mexico before the license issues, the proposed name must be cleared with PSI first, and each member of a joint venture must itself hold a New Mexico license..
- 12Background check. Complete a background check. CID reviews the application against the disqualifying felony convictions listed in 14.6.3.8(F) NMAC and may deny a license or certificate on that basis; sealed, dismissed, expunged or pardoned convictions and juvenile adjudications are not used. An application is also held where there are pending CID disciplinary actions, a workers' compensation compliance problem, a child support delinquency for the proposed Qualifying Party, or an open unlicensed-activity investigation..
Published fees on this path total $667.94, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Trade exam · if applicable
- Exam fee · $269.06
- Law / code exam
- Exam fee · $68.88
Surety bond
A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.
- Surety bond · $10,000
Liability insurance
Some states require proof of general liability or workers' compensation coverage at licensing time.
- Insurance
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Business license
How New Mexico licenses general contractors
New Mexico general contractor · “GB-98 General Building Contractor”
Statewide license
New Mexico's unlimited building tier is the GB-98 General Building classification issued by the Construction Industries Division: erect, alter, repair or demolish residential and commercial buildings and certain structures, including everything the GB-2 residential classification and the GF-5, GF-7 and GS specialty classifications cover, plus seal coating and striping of driveways and parking lots. There is no dollar cap on a GB-98 license, but it is a building classification rather than a universal one, so it excludes structures covered by the electrical (EE), mechanical and plumbing (MM), asphalt and concrete (GA) and fixed works (GF) classifications; the separate GA classifications run from GA-1, streets, roads and highways, through GA-98, and a GB-98 contractor may not prime a project whose major portion by dollar value falls in a GA classification or in most GF classifications. The license belongs to a business that employs or is owned by a Qualifying Party, and that individual is the one who documents the experience, passes the exams and holds a personal certificate of qualification. A GB-98 Qualifying Party needs four years (8,000 hours) of foreman-level experience within the last ten years, of which at least two years must be commercial, and must pass the two-part GB-98 exam and the Contractor's Business and Law exam or an approved course in its place. The entity files a $10,000 code bond and carries workers' compensation, and the license runs three years.
Why New York has nothing to transfer
New York general contractor · “General Contractor Registration (NYC) / General Contractor and Light Commercial Contractor license (Buffalo)”
Licensed by cities and counties
Issued by New York City and city building departments (no statewide general or building contractor license)
New York has no statewide general, commercial, building or unlimited contractor license, and no state board examines or qualifies builders. The Department of State's Division of Licensing Services regulates 35 occupations and none of them is contractor; what the state does license around construction is narrow and specialized — home inspectors, manufactured housing, security and fire alarm installers through the Department of State, and asbestos contractors through the Department of Labor — while the individual building trades are licensed locally rather than by the state. Commercial and new-building work is controlled through the building permit, city by city. New York City requires a General Contractor Registration from the Department of Buildings before a contractor can pull New Building permits for one-, two- and three-family homes, and a registered Construction Superintendent at new buildings and demolitions nine stories and below; Buffalo issues graded General Contractor, New Housing, Light Commercial and Demolition licenses through a monthly advisory board. Most county home improvement laws stop short of this tier on purpose — Suffolk's and Westchester's both exclude new home construction — so outside the cities that license, a commercial builder in New York works under the permit and the Uniform Code with no contractor credential at all. A general contractor arriving from another state has nothing to transfer at state level and no reciprocity to apply for: the work is registering where registration is required and making sure the electrical, plumbing and fire-protection scopes are performed by people holding the right local trade licenses.
How local licensing works in New York
How it works in New York. No New York agency issues a general, commercial, building or unlimited contractor license. There is no state qualifying party, no business-and-law exam, no financial statement filed with a state board and no NASCLA route, because there is no board to file with. That means an out-of-state general contractor's license, its classification and any NASCLA Accredited Examination score carry no weight at state level. What decides whether you can work is the jurisdiction: a registration in New York City, a graded license in Buffalo, a county home improvement license where the job is a renovation rather than a new building, and the correct local trade licenses for the subcontracted scopes everywhere.
New York City — General Contractor Registration. The Department of Buildings requires that "all contractors who build one-, two-, and three-family homes must register with the Department to obtain New Building permits." Registration is $300, renewal $240, late renewal $50, and the term is three years. The applicant must "be at least eighteen (18) years old", "be able to read and write the English language", show good moral character, pass a background investigation and prove financial solvency — the last of which means a company bank account with "a minimum end balance of at least $25,000 for the past three (3) months", evidenced by three consecutive statements. Insurance is general liability with a $1 million minimum, plus workers' compensation and disability certificates. The filing is a notarized LIC6 form with EIN documentation, government photo ID, a Child Support Certification Form and proof of business address, submitted through DOB NOW; paper applications have not been accepted since September 7, 2021. There is no exam and no published experience minimum.
New York City — larger and commercial work. For buildings above the one-to-three-family tier, New York City does not license the general contractor at all; it regulates the site. "A registered Construction Superintendent is required at new buildings and buildings under demolition nine stories and below" — registration $100, renewal $50, term three years, applied for in DOB NOW after a DOB-approved training course. Bigger jobs are governed by site safety requirements and by DOB's other licenses and registrations: electricians, master and journeyman plumbers and fire suppression piping contractors, riggers, sign hangers, hoisting machine operators, welders, concrete safety managers and concrete testing laboratories, site safety professionals and special inspection agencies. Qualifications for all of them are in Chapter 4 of the 2022 NYC Administrative Code. Separately, any work on residential property in the five boroughs still needs the DCWP Home Improvement Contractor license — see the residential level, because in practice most contractors working in New York City need that one first.
Buffalo. Buffalo is the New York city that most closely resembles a classic graded contractor license. Under Chapter 144 of the City Ordinances, anyone "doing construction work in the City of Buffalo" needs a city Contractor License, which "does not allow for plumbing, heating, cooling or electrical work", and working without one is an unclassified misdemeanor carrying up to $1,000 or 60 days. At this tier the categories are General Contractor — "Companies with extensive experience in major construction work will qualify. To perform construction of new residential and commercial structures without limitations", including infrastructure — New Housing Contractor (new residential and commercial structures up to three stories plus remodeling, excluding infrastructure), Light Commercial Contractor (repairs, remodeling, alterations, conversions and modernization of commercial property, plus additions and new accessory structures up to three stories), Construction Manager (oversight and scheduling only, cannot perform construction work) and Demolition Grades 1 through 4. Minimum general liability aggregates are $2,000,000 for General Contractor and every demolition grade, $500,000 for Light Commercial, Specialty, Subcontractor and New Housing, and $50,000 for Handyman and Construction Manager, with the Office of Licenses at 301 City Hall as certificate holder and no PO Box addresses accepted. Demolition Grades 2 and 3 need reference letters from two townships where demolition work was performed, waivable with a resume showing ten years of demolition experience; Grade 4 needs a New York State explosives license held by a major corporate officer. New Housing applicants file copies of the warranties given to new home buyers. Asbestos abatement requires the firm's New York State Department of Labor Asbestos License, lead abatement requires EPA firm certification, and fire suppression system installation requires approval from the Chief of Fire Prevention. Applications must arrive at least seven days before the monthly Construction & Home Improvement Advisory Board meeting, and "attendance at the meeting is mandatory for the applicant" unless a notarized letter authorizes a representative. The fee is not printed on the application packet; ask the Office of Licenses on (716) 851-6583.
The counties stop below this tier. Nassau, Suffolk, Westchester, Rockland and Putnam license home improvement, not building. Suffolk's Chapter 563 definition expressly excludes "the construction of a new home", and the Westchester law states that it "shall not apply to ... the construction of a new home building", along with plumbing work, electrical work and architectural services. A builder putting up new houses in those counties may therefore need no county license at all, while the same builder's remodeling arm does — and both still answer to the town or village building department. Check the scope with the county before assuming either way.
Yonkers and Rochester. Yonkers licenses home improvement contractors who "renovate existing dwellings of 1 to 3 families" and does not issue a commercial builder license; new and commercial construction is handled through the Department of Housing and Buildings permit process. Rochester licenses only electricians, plumbers and stationary engineers / refrigeration operators, and holds the permit applicant responsible for making sure "all required contractors are licensed, proof of insurance is filed and the project complies with the permit".
Everywhere else. Outside the jurisdictions above, commercial construction in New York is governed by the Uniform Code and the local building department, and in most towns and villages a general contractor needs no license — only permits, insurance and licensed trades. Confirm with the building department for the job site, and where the project involves residential property anywhere in the state, General Business Law Article 36-A's written-contract and deposit-escrow rules still apply.
- New York City (Department of Buildings — General Contractor Registration for 1-, 2- and 3-family New Building permits)
- New York City (Department of Buildings — Construction Superintendent registration, nine stories and below)
- Buffalo (Office of Licenses — General Contractor, New Housing, Light Commercial, Construction Manager and Demolition licenses)
- Suffolk County (home improvement license excludes the construction of a new home)
- Westchester County (home improvement license does not apply to the construction of a new home building)
- Yonkers (Consumer Protection Bureau licenses 1-3 family renovation only; no commercial builder license)
- Rochester (Licensed Trades — electrical, plumbing and SE/RO only; no builder license)
Common questions
- Do I have to take the New Mexico general contractor exam if I'm licensed in New York?
- The trade exam is waived, but New Mexico requires a law or code exam.
- How long do I need to have held my New York license?
- At least 1 year before applying.
- What does it cost to get a New Mexico general contractor license from New York?
- Published fees on this path total $667.94, not counting exam vendor fees or bonds.
- Do my New York work hours count in New Mexico?
- Yes. Documented out-of-state experience counts toward New Mexico's eligibility requirements.
- Does it work the other way, from New Mexico to New York?
- Not necessarily. Reciprocity is directed. Going from New Mexico to New York, the mechanism is not applicable.
Sources
- NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
- Construction Industries Licensing Act, NMSA 1978 Chapter 60, Article 13 (RLD compilation as of July 1, 2021) · NMSA 1978 §§ 60-13-3, 60-13-14, 60-13-14.1, 60-13-23, 60-13-49 · New Mexico Regulation and Licensing Department · Statute · verified September 17, 2026
- 14.5.5 NMAC - Construction Industries General Provisions: Fees · 14.5.5.8 and 14.5.5.14 NMAC · New Mexico Commission of Public Records, State Records Center and Archives · Admin Rule · verified September 17, 2026
- 14.6.3 NMAC - Construction Industries Licensing: Contractor's License Requirements · 14.6.3.8 NMAC · New Mexico Commission of Public Records, State Records Center and Archives · Admin Rule · verified September 17, 2026
- 14.6.6 NMAC - Construction Industries Licensing: Classifications and Scopes of Work · 14.6.6.8 and 14.6.6.9 NMAC · New Mexico Commission of Public Records, State Records Center and Archives · Admin Rule · verified September 17, 2026
- NM CID - How to Obtain a Contractor License and Contractor License Application (updated October 2023) · PSI Services for the New Mexico Construction Industries Division · Form · verified September 17, 2026
- State of New Mexico Contractor (Qualifying Party) Examinations Candidate Information Bulletin (PSI) · PSI Services for the NM Construction Industries Division · Other · verified September 17, 2026
- New Mexico Contractor Licensing - Frequently Asked Questions (CID / PSI) · PSI Services for the New Mexico Construction Industries Division · Faq · verified September 17, 2026
- PSI General Building Work Experience Verification - New Mexico Contractor Licensing Service · PSI Services for the New Mexico Construction Industries Division · Form · verified September 17, 2026
- New Mexico Licensing Fees (CID contractor, qualifying party and journeyman fee schedule) · PSI Services for the New Mexico Construction Industries Division · Other · verified September 17, 2026
- NM CID Qualifying Party Certificate Application and Instructions (instructions updated May 2025, form updated August 2025) · PSI Services for the New Mexico Construction Industries Division · Form · verified September 17, 2026
- NM Regulation and Licensing Department - Apply for a Construction Industries License · New Mexico Regulation and Licensing Department, Construction Industries Division · Agency Page · verified September 17, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.