New York to New Mexico: residential contractor license reciprocity
New York does not issue a statewide residential contractor license, so there is nothing to transfer. Here is New Mexico's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Out-of-state residential contractor applying for GB-2 (all states)
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
A residential contractor licensed in another state gets no exam waiver and no shortened path to a New Mexico GB-2 license. The only reciprocity the Construction Industries Division publishes is for the EE-98J electrical journeyman certificate, 14.6.3 NMAC contains no endorsement or substantial-equivalence route for a contractor or Qualifying Party, and the NASCLA exam waiver that CID does operate is limited to the GB-98 and EE-98 classifications, not GB-2. What does carry across is the work itself: out-of-state experience counts in full toward the two years (4,000 hours) of foreman-level experience, provided it was gained while employed by a contractor licensed in the trade or was legal work in the state where it was performed, and the out-of-state contractor who signs the notarized affidavit attaches a copy of their own current state license. The applicant files the Qualifying Party application and General Building Work Experience Verification affidavits with PSI, waits for CID or PSI to approve the experience, then passes the GB-2 exam and the Business and Law exam, and the company that will hold the license applies separately with the bond, the tax registration certificate and proof of the Qualifying Party's exams. Statute does let the division enter reciprocal agreements with states having equivalent requirements, but none covering a building classification has been published.
Accredited college, university, manufacturer, vocational or apprenticeship training counts as one-half year of experience per year and may not exceed half of the two-year requirement. Estimating, project management, ordering supplies and supervising do not count as hands-on experience on the affidavit, and the affidavit must state whether the experience was residential or commercial. Once PSI approves the application, every remaining requirement must be met within six months or the fees are forfeited, and the trade exam and the Business and Law exam must both be passed within one year of each other. An exam may not be repeated more than twice in any 30-day period. Military service members, their spouses and dependent children and veterans who are currently licensed and in good standing in another jurisdiction with substantially equivalent requirements have a separate expedited route: CID issues within 30 days and waives the license fees for the first three years. A homeowner-scale exemption exists for an individual doing one project at a time for no more than $7,200 a year in casual or handyman work, but it does not extend to electrical, plumbing or gas fitting and requires an annual declaration to the division.
At a glance
- Trade exam
- Required
- Law / code exam
- Required
- Out-of-state hours
- Count toward eligibility
What you must already have
- You must document at least 4,000 hours of qualifying work experience.Two years (4,000 hours) of foreman-level practical or related trade experience in residential building, gained within the ten years immediately before application (14.6.6.9(B)(1) NMAC; NMSA 60-13-14(B)(8) as reduced by rule). It is documented on notarized General Building Work Experience Verification affidavits, one per employer or affiant, completed by an employer, supervisor, foreman or other contractor rather than by the applicant.
- Experience must have been gained while employed by a contractor licensed in the trade being applied for, or be work that was legal in the state where it was performed. An out-of-state contractor certifying the experience attaches a copy of their current state license to the affidavit; where the state does not license that trade, proof that the company was active and valid, such as a tax certificate or corporation papers, is attached instead.
- The Qualifying Party must be at least 18 and may qualify only one licensed entity unless there is at least thirty percent common ownership between the entities. CID may deny a license or certificate where the applicant or the proposed Qualifying Party has a disqualifying felony conviction, and an applicant denied on that basis may submit written evidence of mitigation or rehabilitation and appeal.
What you'll do to get licensed in New Mexico
- 1Application fee. Pay the application fee ($30). Non-refundable Qualifying Party application fee, paid to PSI with the notarized application and work-experience affidavits. Complete packets go to the PSI Albuquerque office by hand or mail; faxed and emailed forms are not accepted..
- 2Other. Qualifying Party certificate fee, charged for each classification on the application (14.5.5.14(A) NMAC). With the $30 application fee this is the $36 the Construction Industries Division quotes for a single-classification Qualifying Party filing. ($6).
- 3Trade exam. Pass the destination's trade exam. GB-2 Residential Building Contractor exam, administered by PSI once CID or PSI approves the experience affidavits: 80 questions, 225 minutes, open book, 75% (60 points) to pass. Content covers sitework, footings and foundations, concrete and reinforcement, masonry, carpentry, roofing, associated trades, general code, plan reading and estimating, and OSHA safety, against the 2021 New Mexico Residential Building Code (14.7.3 NMAC), the 2021 International Residential Code, the 2021 International Energy Conservation Code and 29 CFR 1926..
- 4Exam fee. Pay the exam fee ($134.53). PSI fee for the GB-2 exam, charged for a first attempt or a retake..
- 5Law / code exam. Pass a law, rules, or code exam. Contractor's Business and Law exam, required of all new Qualifying Party candidates: 50 questions, 130 minutes, open book, 75% (38 points) to pass, covering licensing requirements, estimating and bidding, business organization and financial management, tax and labor law, project management and lien law, contracts, risk management, and environment and safety. An approved Business and Law course taken with a CID-approved vendor may be completed in place of the exam..
- 6Exam fee. Pay the exam fee ($68.88). PSI fee for the Business and Law exam..
- 7Contractor license. Hold or obtain a contractor license ($30). Non-refundable contractor license application fee paid to PSI by the business, filed with the notarized Contractor License Application, a copy of the Qualifying Party's certificate or passing score reports, and the Business and Law score or course certificate. A $6 certificate fee covering the license certificate and two wallet cards is charged with it..
- 8License fee. Pay the license or certificate fee ($300). Classification fee for GB-2, covering the full three-year license term on PSI's current schedule. Adding a GS specialty classification alongside it does not raise the total above $300 for the category. Late renewal costs $1 a day for the first 30 days and the equivalent of one year's fee from 30 to 90 days; after 90 days the license is cancelled and the business must reapply..
- 9Surety bond. Post a surety bond ($10,000). $10,000 code bond from a corporate surety authorized to transact business in New Mexico, issued in the exact name shown on the application and effective for the entire three-year license period. It is the statutory proof of responsibility, may be drawn on only to cure division-certified code violations the licensee has not corrected, and must be kept in force for the whole term; claims are limited to two years after final inspection or issuance of a certificate of occupancy..
- 10Insurance. Carry the required insurance. Workers' compensation coverage is required of every licensed entity, and failure to maintain it is cause for revocation of the license. A sole proprietor with no employees may be exempt; the Workers' Compensation Administration can confirm. An application is placed on hold while the applicant is out of compliance..
- 11Business license. Obtain a business license. A registration certificate issued within the last twelve months by the New Mexico Taxation and Revenue Department in the exact name on the license application, plus proof of registration with the New Mexico Public Regulation Commission for a corporation or LLC, or with the Secretary of State for a limited liability partnership or limited partnership. A corporation, LLC, LP or LLP must be legally authorized to do business in New Mexico before the license issues, and the proposed business name must be cleared with PSI first..
- 12Background check. Complete a background check. CID reviews the application against the disqualifying felony convictions listed in 14.6.3.8(F) NMAC and may deny a license or certificate on that basis; sealed, dismissed, expunged or pardoned convictions and juvenile adjudications are not used. An application is also held where there are pending CID disciplinary actions, a workers' compensation compliance problem, a child support delinquency for the proposed Qualifying Party, or an open unlicensed-activity investigation..
Published fees on this path total $533.41, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Trade exam
- Exam fee · $134.53
- Law / code exam
- Exam fee · $68.88
Surety bond
A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.
- Surety bond · $10,000
Liability insurance
Some states require proof of general liability or workers' compensation coverage at licensing time.
- Insurance
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Business license
How New Mexico licenses residential contractors
New Mexico residential contractor · “GB-2 Residential Building Contractor”
Statewide license
New Mexico licenses homebuilders statewide through the Construction Industries Division of the Regulation and Licensing Department, and the homes-only classification is GB-2 Residential: erect, alter, repair or demolish residences and apartment houses of not more than four family units in occupancy Groups R-1, R-2 and R-3, plus incidental Group U structures and any GS specialty work kept inside that residential scope. Anything commercial, and any residential building beyond four units, needs the GB-98 General Building classification instead. The license is held by a business, not by a person: CID issues it to a qualified entity that employs or is owned by a Qualifying Party, and the Qualifying Party is the individual who documents the experience, sits the exams and holds a personal, non-transferable certificate of qualification, so a builder moving to New Mexico applies first as a Qualifying Party and then for the company license. A GB-2 Qualifying Party needs two years (4,000 hours) of foreman-level practical or related trade experience gained within the ten years before applying, and must pass the GB-2 trade exam and the Contractor's Business and Law exam, or take an approved Business and Law course in place of that exam. Every licensed entity files a $10,000 code bond and carries workers' compensation coverage, and licenses run for three years. CID publishes reciprocity for one credential only, the EE-98J electrical journeyman certificate, so no other state's contractor license is recognized at this level.
Why New York has nothing to transfer
New York residential contractor · “Home Improvement Contractor license (municipal; title and scope vary by jurisdiction)”
Licensed by cities and counties
New York issues no statewide residential contractor, home improvement contractor or home builder license. The Department of State's Division of Licensing Services regulates 35 occupations — real estate brokers and salespersons, appraisers, home inspectors, manufactured housing, security and fire alarm installers, cosmetology and the like — and contractor is not among them. The only statewide law that reaches a residential contractor is General Business Law Article 36-A, which governs home improvement contracts rather than licenses: it requires a signed written contract, requires customer deposits taken before substantial completion to be held in escrow or covered by a bond, and asks the contract to state the contractor's "license number, if applicable" — the words "if applicable" are there precisely because the license, where one exists, comes from a county or a city. New York is one of the most fragmented licensing states in the country. New York City licenses home improvement contractors through the Department of Consumer and Worker Protection; Nassau, Suffolk, Westchester, Rockland and Putnam counties each run their own program; and cities including Yonkers and Buffalo license on top of or instead of the county. These licenses are held by the business and qualified by a named owner, officer or principal, so the reader is applying for a company license in their own name as the responsible individual. An out-of-state residential contractor has no state license to transfer and no state reciprocity to apply for, but a license already held elsewhere is not worthless: several New York jurisdictions accept it as evidence of qualifying experience.
How local licensing works in New York
How it works in New York. There is no state license, no state application and no state exam for residential contractors. A contractor must be licensed in every jurisdiction where the work is performed, and the licenses are not interchangeable — a Nassau County license does not authorize work in Suffolk, and a Westchester County license does not by itself authorize work in Yonkers. Almost every program licenses the business and requires one named owner, officer, principal or member to stand behind it, so budget for one application per county or city rather than one per person. Nothing in these programs is a state-to-state agreement, and none of them waives anything because of a license held in another state.
New York City — the one that matters most. The Department of Consumer and Worker Protection (DCWP) Home Improvement Contractor license is the single most consequential residential credential in the state: "A person or business must have a Home Improvement Contractor license to do construction, repair, remodeling, or other home improvement work to any residential land or building in New York City", including basements, driveways, fences, garages, landscaping, patios and swimming pools. One person — the sole proprietor, a general partner, a corporate officer, principal, director, member, or a shareholder owning 10% or more of the stock — must pass the Home Improvement Exam: 30 questions, at least 21 correct to pass, booked with ExamBuilder and sat at test centers open 9:00 a.m. to 5:00 p.m. seven days a week across the city, within 60 days of filing. The exam is included in the application fee for up to two attempts, and $50 buys two more. The applicant must either enroll in the Home Improvement Business Trust Fund for $200 or post a $20,000 surety bond, and must file a workers' compensation certificate naming DCWP at 42 Broadway, New York, NY 10004, or a CE-200 exemption. The license runs two years and expires on February 28 of odd years, so the fee is pro-rated by filing date: $200 from 1 March to 31 August of an odd year, $150 from 1 September of an odd year to the end of February, $100 from 1 March to 31 August of an even year, and $50 or $250 from 1 September of an even year depending on the term chosen. There is no experience requirement and no requirement that the business already be in New York.
Nassau County. The Department of Consumer Affairs runs the most demanding program in the state and the one that most rewards an out-of-state license. One owner, officer or principal "must have at least 5 years of recent, relevant verifiable experience in the home improvement field", proved by "five years of W2's, 1099's, or a license in another municipality". A new two-year license is $650, plus a separate one-time $50 payment into the Restitution Fund, $110 for each additional location and $60 to replace a lost license; every applicant also submits to a one-time fingerprint-based background check costing about $90. Liability insurance must show bodily injury limits of $250,000/$500,000 and property damage of $100,000 with the department at 240 Old Country Road, Mineola as certificate holder. At least one principal needs EPA RRP lead-safety certification where lead paint may be disturbed; irrigation work needs a New York backflow tester certification; pool and spa work needs five years' experience plus a CBP, CST, CSP or CMS certification. Out-of-state businesses face an extra hurdle: "you must provide a Certificate of Authority to do business in NY State, have a NY State location, as well as an authorized contact person that has a NYS residence." A judgment and open-complaint search is run on every principal, and all subcontractors except plumbers and electricians must hold their own Nassau license. There is no written exam. (516) 571-2600.
Suffolk County. Licensing sits with the Department of Labor, Licensing and Consumer Affairs under Chapter 563 of the county code, and home improvement licenses are more than half of everything the county issues. "Home improvement contracting" is defined broadly — carpentry, fencing, driveways, flooring, HVAC ductwork, masonry, roofing, siding, pools and spas, waterproofing, landscaping and tree work — but it expressly excludes electrical and plumbing work and "the construction of a new home". The fee is a $200 application fee plus $200 per annum for the license itself, the term is two years, and each salesperson needs a $50-per-year identification card. The Director may require a surety bond "in an amount to be set by the Director, but in no event to exceed $100,000" and sets the liability insurance figure. There is no general trade exam, but pool and spa builders need an APSP Certified Building Professional certification plus two years' experience, pool and spa service contractors need a CST, CSP or CBP plus two years, and renewing pool contractors need six hours of continuing education. (631) 853-4600.
Westchester County. "Westchester law requires that home improvement contractors have a county license." The fee is $750 for the two-year term as of January 1, 2026, with $100 for expedited handling, $50 for late renewal, $10 per vehicle decal and $50 for a replacement certificate. Processing normally takes about 60 business days, or seven business days if expedited. The packet is documentary rather than examined: notarized application, proof of business name from wherever the company is based, liability insurance naming the department at 148 Martine Avenue, Room 407, White Plains as certificate holder, workers' compensation and disability certificates (or a CE-200), photo ID for every owner, officer, member, partner, manager and salesperson, and a notarized child support certification from sole proprietors and partners. The application asks directly whether the company is "licensed in any other jurisdiction" and for those license numbers. A bond or cash security of up to $50,000 may be required at the Director's discretion, at application or later. The county law does not apply to plumbing, electrical or architectural work, to work within a state-licensed occupation, or to "the construction of a new home building". The cover letter warns that "the CITY OF YONKERS has additional licensing requirements". (914) 995-2155.
Yonkers. Inside Westchester County, Yonkers licenses separately through its Consumer Protection Bureau, and a contractor renovating existing one- to three-family dwellings in the city needs both. The Yonkers Home Improvement License costs $400, is non-refundable, runs two years and is not transferable. The packet requires a notarized application signed by an owner, partner or officer, vehicle registrations with automobile insurance (bumper stickers are issued for three vehicles, $10 for each additional one, and at least one vehicle must be listed), a DMV driver's license or non-driver ID, a $500,000 general contractor liability certificate naming the Office of Licensing/Consumer Protection, a workers' compensation certificate or CE-200, proof of business name, a NYS Certificate of Authority if the company charges sales tax, and a completed Work History Form. A background check is run on both the applicant and the business. Vehicles must display the business name, address and phone in eight-inch permanent letters or on a 2x3 foot sign. 914-377-6808.
Rockland County. Chapter 286 of the Laws of Rockland County requires everyone performing home improvement work in the county to hold a county Home Improvement License, issued by the Department of Consumer Protection / Weights and Measures. Rockland is unusually explicit about out-of-jurisdiction applicants: its applications are grouped by qualification route, one for applicants relying on experience in the trade classification, one for applicants who have held a license in another jurisdiction for at least five years without complaints or violations, and one for applicants posting a surety bond for the classification. A Home Improvement Licensing Board of trade members reviews credentials and investigates complaints, contractors must carry liability, workers' compensation and disability insurance, and general contractors must use licensed and insured subcontractors. Confirm the current fee and classification list with the department before filing: 845-364-3901.
Putnam County. The Office of Consumer Affairs registers home improvement contractors for $300, covering a two-year registration, and requires a $25,000 license and permit bond written for a two-year period, with the registration's expiration set to match the bond term. Also required: a certified business, partnership or corporate filing document, an ACORD liability certificate naming Putnam County Consumer Affairs as certificate holder and Putnam County as additionally insured with the scope of work spelled out, a workers' compensation form or CE-200, a notarized child support form for non-corporations, current vehicle registrations, a photo of the owner or highest-ranking officer, a driver's license from the applicant's home state, and — again a break for someone arriving with credentials — "copies of CURRENT HOME IMPROVEMENT LICENSES - if held in other municipalities". Decals come with the registration, extras are $5 each. Landscaping and lawn care contractors add a Lawn Care Best Management Practices certificate. 845-808-1617 ext. 46024.
Buffalo. Chapter 144 of the City of Buffalo Ordinances requires anyone "engaged in a home improvement business (i.e. painting, siding, roofing) or doing construction work in the City of Buffalo" to hold a city Contractor License, which "does not allow for plumbing, heating, cooling or electrical work". Working without one is an unclassified misdemeanor carrying up to $1,000 or 60 days. Residential categories are Handyman Contractor (minor repairs and maintenance, one named person, no roofing, siding or large renovations), Specialty Contractor, Sub-Contractor (cannot pull permits and must work under a prime) and New Housing Contractor. Minimum general liability aggregates are $50,000 for Handyman and Construction Manager, $500,000 for Light Commercial, Specialty, Subcontractor and New Housing, and $2,000,000 for General Contractor and every demolition grade. Applicants also file workers' compensation proof (C105.2, U-26.3, SI-12 or GSI-105.2) or a CE-200 that bars using subcontractors, register the business name with the Erie County Clerk even if it is registered elsewhere, and supply RRP or EPA lead firm certification unless exempt. The step that surprises people: the application must arrive at least seven days before the monthly Construction & Home Improvement Advisory Board meeting and "attendance at the meeting is mandatory for the applicant", in person or through a notarized representative. Ask the Office of Licenses for the current fee, which is not printed on the application packet: (716) 851-6583.
Rochester. Rochester licenses electricians, plumbers and stationary engineers / refrigeration operators and nothing else — there is no city home improvement or builder license. The city puts the duty on whoever pulls the permit: it is "the applicant's responsibility to ensure all required contractors are licensed, proof of insurance is filed and the project complies with the permit". Building Permit Office 585-428-6526.
Everywhere else. Outside these jurisdictions, hundreds of New York towns and villages regulate residential work only through the building permit and the state's Uniform Code, while others have their own contractor registration ordinances. Before signing anything, ask the county consumer affairs office and the town or village building department that covers the job site, and remember that General Business Law Article 36-A's written-contract and escrow rules apply everywhere in the state whether or not a license is required.
- New York City (Department of Consumer and Worker Protection — Home Improvement Contractor license)
- Nassau County (Department of Consumer Affairs — Home Improvement License)
- Suffolk County (Department of Labor, Licensing and Consumer Affairs — Home Improvement Contractor license)
- Westchester County (Department of Consumer Protection — Home Improvement License)
- Rockland County (Consumer Protection / Weights and Measures — Home Improvement License, Chapter 286)
- Putnam County (Office of Consumer Affairs — Home Improvement Contractor Registration)
- Yonkers (Consumer Protection Bureau — Home Improvement License, required in addition to the Westchester County license)
- Buffalo (Office of Licenses — Handyman, Specialty, Sub-Contractor and New Housing Contractor licenses)
- Rochester (Licensed Trades — electrical, plumbing and SE/RO only; no home improvement license)
Common questions
- Do I have to take the New Mexico residential contractor exam if I'm licensed in New York?
- Yes. New Mexico requires the trade exam on this path, plus a law or code exam.
- What does it cost to get a New Mexico residential contractor license from New York?
- Published fees on this path total $533.41, not counting exam vendor fees or bonds.
- Do my New York work hours count in New Mexico?
- Yes. Documented out-of-state experience counts toward New Mexico's eligibility requirements.
- Does it work the other way, from New Mexico to New York?
- Not necessarily. Reciprocity is directed. Going from New Mexico to New York, the mechanism is not applicable.
Sources
- Construction Industries Licensing Act, NMSA 1978 Chapter 60, Article 13 (RLD compilation as of July 1, 2021) · NMSA 1978 §§ 60-13-3, 60-13-14, 60-13-14.1, 60-13-23, 60-13-49 · New Mexico Regulation and Licensing Department · Statute · verified September 17, 2026
- 14.5.5 NMAC - Construction Industries General Provisions: Fees · 14.5.5.8 and 14.5.5.14 NMAC · New Mexico Commission of Public Records, State Records Center and Archives · Admin Rule · verified September 17, 2026
- 14.6.3 NMAC - Construction Industries Licensing: Contractor's License Requirements · 14.6.3.8 NMAC · New Mexico Commission of Public Records, State Records Center and Archives · Admin Rule · verified September 17, 2026
- 14.6.6 NMAC - Construction Industries Licensing: Classifications and Scopes of Work · 14.6.6.8 and 14.6.6.9 NMAC · New Mexico Commission of Public Records, State Records Center and Archives · Admin Rule · verified September 17, 2026
- NM CID - How to Obtain a Contractor License and Contractor License Application (updated October 2023) · PSI Services for the New Mexico Construction Industries Division · Form · verified September 17, 2026
- State of New Mexico Contractor (Qualifying Party) Examinations Candidate Information Bulletin (PSI) · PSI Services for the NM Construction Industries Division · Other · verified September 17, 2026
- New Mexico Contractor Licensing - Frequently Asked Questions (CID / PSI) · PSI Services for the New Mexico Construction Industries Division · Faq · verified September 17, 2026
- PSI General Building Work Experience Verification - New Mexico Contractor Licensing Service · PSI Services for the New Mexico Construction Industries Division · Form · verified September 17, 2026
- New Mexico Licensing Fees (CID contractor, qualifying party and journeyman fee schedule) · PSI Services for the New Mexico Construction Industries Division · Other · verified September 17, 2026
- NM CID Qualifying Party Certificate Application and Instructions (instructions updated May 2025, form updated August 2025) · PSI Services for the New Mexico Construction Industries Division · Form · verified September 17, 2026
- NM Regulation and Licensing Department - Apply for a Construction Industries License · New Mexico Regulation and Licensing Department, Construction Industries Division · Agency Page · verified September 17, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.