LicensebyState

Ohio to Hawaii: general contractor license reciprocity

No credit· Start overVerified September 17, 2026· 15 sources

Ohio does not issue a statewide general contractor license, so there is nothing to transfer. Here is Hawaii's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

Out-of-state experience credited toward the four years, full Hawaii examination (every state)

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

Hawaii runs no reciprocity at any level. The Board's FAQ says so in one line: Hawaii has no reciprocity agreements with other states, and all applicants must meet the same licensing and examination requirements. Its form list carries no verification-of-licensure form and no examination waiver, its rules contain no provision recognizing another state's license, and Hawaii is not one of the states that accepts the NASCLA Accredited Examination. An arriving contractor therefore files as a new applicant, but does not start from zero: the four years of supervisory experience within the past ten years may be served under another state's license, the Board asks for proof of that licensure, and an out-of-state contractor who held a license in that state is among the people who may sign the notarized experience certificates. At least three certificates are required, one for each classification sought, together with a Chronological History of Projects that sets out each job, what was built in-house and what was subcontracted, the contract amount and the real on-site supervision time. Once the Board approves the application at a monthly meeting, the qualifying person has six months to pass both examination parts at seventy-five percent each.

Nevada's endorsement charts map the Hawaii B General Building Contractor license onto the Nevada B and B-2 classifications for experience purposes, but Hawaii publishes nothing in the other direction and names no state, so no pairwise agreement is authored here. A Class B applicant who also wants a specialty classification files a separate project list and sits a separate part II examination for each one, though the ten subclassifications that come free with Class B need neither. HAR 16-77-35(b) also allows the Board to ask a Class C licensee who is applying for a Class A or Class B license for a current financial statement and supporting documents. A licensee already holding a Hawaii license in a classification may be excused the examination only where it qualified by written examination within the previous four years and is applying in that same classification.

At a glance

Trade exam
Required
Law / code exam
Required
Out-of-state hours
Count toward eligibility

What you must already have

  • Four full years of supervisory experience within the ten years immediately before the application, in the classification applied for, at the level of journeyman, foreman, supervisor or contractor, counting only time actually spent on site supervising and directing employees.HRS 444-11(a)(2) lets the Board accept experience acquired on a self-employed or unlicensed basis where it can be verified. Technical training may be approved as acceptable experience but never counts for more than one year. Design time, ordering materials and scheduling around rain-outs or deliveries do not count.
  • Supervisory years worked under another state's contractor license count toward the four years. The Board asks an applicant with licensed experience elsewhere to provide proof of licensure, and an out-of-state contractor who held a license in that state may sign an experience certificate. The proof of licensure does not replace the certificates or the project list.
  • You must have no disciplinary action or unresolved complaints on your record.
  • The qualifying person must be at least eighteen and, unless applying as a sole proprietor, must be employed by the licensed contracting entity as its Responsible Managing Employee. The principal RME must be in residence in Hawaii while the entity's license is in effect or a project is under construction, and a licensee must keep a physical place of business in the State; a post office box is not accepted.

What you'll do to get licensed in Hawaii

  1. 1Law / code exam. Pass a law, rules, or code exam. Part I of the contractor examination: the building, safety, health, labor and lien laws of Hawaii and the basic administrative principles of the contracting business. Seventy-five percent is needed to pass. It is never waived for an out-of-state applicant. The Board strongly recommends obtaining a copy of the contractor licensing law and rules before sitting it..
  2. 2Trade exam. Pass the destination's trade exam. Part II of the contractor examination: trade knowledge in the classification requested, here Class B general building. Seventy-five percent is needed to pass. The applicant registers with the testing agency only after the Board approves the application and issues an examination approval letter, and must pass both parts within six months or file a new application and fee. A failed part may be retaken for a further fee inside that six-month window..
  3. 3Application fee. Pay the application fee ($50). $50 nonrefundable application fee for each application filed, payable to Commerce and Consumer Affairs. More than one classification may be requested on a single application, but a contracting entity and its Responsible Managing Employee file separate applications and pay the fee separately, so an inbound company and its qualifying person pay $50 each. A further $10 contractors education fund fee accompanies every application, and a dishonored payment carries a $25 service charge..
  4. 4Exam fee. Pay the exam fee. Examination fees are paid directly to the testing agency when the approved applicant registers, and are charged for each part taken. The Board's published FAQ lists $75 per part, with most classifications taking both parts, but that document dates from before the examinations moved to PSI Services LLC, so confirm the current amount with PSI on (833) 333-4754 before registering. An interpreter, if the Board approves one, adds $100 to the examination fee..
  5. 5License fee. Pay the license or certificate fee. The Board assesses the license fee after the application is approved and the examinations are passed, telling the applicant the exact amount at that point. Its published FAQ gives $663 for a contracting entity or sole proprietor licensed in the first year of the two-year cycle and $494 in the second, and $438 or $334 on the same split for a Responsible Managing Employee, so budget for both. Licenses run to September 30 of the next even-numbered year whatever date they were issued. On-time renewal currently costs $338 for an entity or sole proprietor, $208 for an RME and $160 for an inactive license, plus $5 education fund and $10 recovery fund fees..
  6. 6Financial responsibility. Show financial responsibility. A current financial statement, dated within one year, that is compiled, reviewed or audited and accompanied by an independent accountant's report from a CPA or public accountant holding a current permit to practice; an accountant licensed in another state attaches a copy of that license. For compiled and reviewed statements the applicant also signs the Board's own Financial Statement form CT-02 whether or not the accountant used it. The Board publishes no minimum net worth or working capital figure: it weighs the statement together with the credit reports and the tax clearance to decide whether the applicant has financial integrity, and whether to impose a bond. RMEs do not file a financial statement; the entity or sole proprietor does..
  7. 7Surety bond. Post a surety bond (if applicable). A surety bond is not automatic in Hawaii. The Board may require one as proof of financial integrity, and sets the amount case by case; the bond form leaves the penal sum blank. Where one is imposed, it runs to the State of Hawaii on form CT-09, is conditioned on compliance with HRS chapter 444 and on paying employees' wages, is continuous, and can be canceled by the surety only on thirty days' written notice. Both the applicant and the surety notarize it. After a licensee has maintained the bond for at least a year it may ask the Board to waive it on proof of financial integrity, supported by current credit reports, financial statements and a tax clearance..
  8. 8Insurance. Carry the required insurance. A certificate of comprehensive liability and property damage insurance with minimum limits of $100,000 bodily injury each person, $300,000 bodily injury each occurrence and $50,000 property damage each occurrence, plus a workers' compensation certificate from a carrier authorized in Hawaii or proof of self-insurance or exclusion. An out-of-state contractor may use a non-admitted carrier where the producer qualifies for an exemption under HRS 431:9A-104(b)(6). Coverage must be continuous for the life of the license: a lapse forfeits both the entity and the RME license automatically, and if it is not restored within sixty days both must apply as new applicants. Certificates are filed fastest through the Board's online insurance submittal system..
  9. 9Business license. Obtain a business license. The contracting entity must be registered with the DCCA Business Registration Division before it can be licensed: a Hawaii corporation or LLC files a stamped copy of its articles, a foreign corporation its certificate of authority and a partnership its registration statement, and an entity registered for more than a year attaches a Certificate of Good Standing issued within the past year. Any trade name must be separately registered and a filed-stamped copy supplied. A current Hawaii tax clearance, issued within six months, is filed with the application and again at every renewal, and the name on it must match the license name exactly..
  10. 10Background check. Complete a background check. A current and complete credit report for each officer, partner, manager or member, issued not more than six months earlier and covering at least the previous five years, showing each current and past debt, its status and any public records; a summary or a bare credit score is not accepted. Where a partner or member is itself a business, the credit reports of its officers or a comprehensive business credit report are filed instead. The RME files a credit report with the RME application as well..
  11. 11Continuing education. Complete continuing education (if applicable). Hawaii imposes no continuing education requirement on contractors. Renewal by September 30 of each even-numbered year instead turns on continued financial integrity: a current tax clearance or payment arrangement, a statement about any liens, undisputed debts or judgments, proof that workers' compensation and liability coverage have been maintained without a break, and proof that any bond the Board imposed is current..
  12. 12Other. The application, fee and every supporting document must reach the Board's Honolulu office on or before the first Tuesday of the month before the meeting at which it will be considered; the Board meets monthly except in December, and faxed or emailed copies are not accepted. An application is abandoned if licensure is not completed within a year of filing or the examinations are not passed after eligibility, and the Board keeps a denied application for two years. A Social Security number must be given or the application is treated as deficient..

Published fees on this path total $50, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Law / code exam
  • Trade exam
  • Exam fee

Surety bond

A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.

  • Surety bond · if applicable

Liability insurance

Some states require proof of general liability or workers' compensation coverage at licensing time.

  • Insurance

Business registration

If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.

  • Business license

Continuing education

Renewals usually need approved CE hours, often on the latest NEC. Reciprocal licensees are rarely exempt.

  • Continuing education · if applicable

How Hawaii licenses general contractors

Hawaii general contractor · “Class B General Building Contractor

Statewide license

Verified September 17, 2026· 8 sources

Issued by Hawaii Contractors License Board (DCCA Professional and Vocational Licensing Division)

Hawaii's building tier is the Class B general building contractor license issued by the Contractors License Board at the Department of Commerce and Consumer Affairs. HRS 444-7 splits the contracting business into just three branches, Class A general engineering for fixed works such as highways, bridges, harbors, dams and utility plants, Class B general building for structures, and Class C specialty for the individual trades, and there is no residential class anywhere in Hawaii law, so Class B is the license for houses and for commercial buildings alike. A Class B license covers any contract requiring more than two unrelated building trades, and it automatically carries ten Class C subclassifications, among them carpentry framing, carpentry remodeling, drywall, scaffolding, cement concrete and roofing shingles, without a further examination or fee. It does not cover a job that needs only one or two unrelated trades unless the holder also carries the matching specialty license, and electrical and plumbing work always needs the C-13 or C-37 classification plus an individually licensed electrician or plumber. The license is held by the business and qualified by a person: a corporation, partnership, joint venture, LLC or LLP must employ a licensed Responsible Managing Employee, who is the one with the four years of supervisory experience and the passed examinations, and who must live in Hawaii while the license is in force. A contractor trading in their own name is licensed as a sole proprietor instead.

Moving to HawaiiLeaving Hawaii

Why Ohio has nothing to transfer

Ohio general contractor · “General / building contractor registration (city-issued)

Licensed by cities and counties

Verified September 17, 2026· 20 sources

Issued by No state authority; cities and counties register commercial building contractors

Ohio has no statewide general, commercial or unlimited building contractor license, so there is nothing at state level for an out-of-state general contractor's license to transfer into and no NASCLA route to take. The Ohio Construction Industry Licensing Board licenses individual contractors in five specialty trades only - electrical, HVAC, refrigeration, plumbing and hydronics - under R.C. Chapter 4740, and its board has an electrical section, a plumbing and hydronics section and an HVAC and refrigeration section but no building section. Those five licenses are also the only ones Ohio's reciprocity agreements reach: OCILB's published partner list names Alabama, Arkansas, Kentucky, Louisiana, Mississippi, North Carolina, South Carolina, Tennessee, Texas, Virginia and West Virginia, and every entry is scoped to one or more of the five trades. Commercial building is instead controlled through city permitting, and the requirements are administrative rather than technical: Columbus registers a General Contractor on a $25,000 bond and a liability certificate with no exam, Cincinnati registers a Building Construction Contractor on insurance and workers' compensation for $131.25 a year, Cleveland requires general contractors to be bonded, insured and registered under Chapter 3107 of its Codified Ordinances, and Akron requires anyone whose work needs a permit to register. Toledo and Dayton license only the trades and have no commercial building contractor license at all, and Summit County, which issues Akron's building permits, replaced annual contractor registration with a permit-based process in 2024. None of these registrations involves a trade or business-law exam, a qualifying party, a financial statement or an experience review, and none of them recognizes another state's license, so a general contractor arriving in Ohio registers jurisdiction by jurisdiction and makes sure the electrical, HVAC, refrigeration, plumbing and hydronics scope is performed under the correct OCILB state licenses.

How local licensing works in Ohio

How local licensing works. No Ohio agency issues a general, commercial, building or unlimited contractor license, and there is no Ohio equivalent of a qualifying party, a NASCLA route or a state business-and-law exam for builders. Ohio has around 800 certified building departments, each with its own contractor rules, so identify the department with jurisdiction over the site - the Board of Building Standards map at com.ohio.gov/JurisdictionMap does this by address - and register there before bidding. One statewide rule shapes what those departments ask for: R.C. 4740.12 provides that "no political subdivision, district, or agency of the state may adopt an ordinance or rule that requires contractor registration and the assessment of a registration or license fee unless that ordinance or rule also requires any contractor who registers and pays the registration or license fee to be licensed in the contractor's trade pursuant to this chapter", which OCILB describes as requiring building and health departments with a registration program to demand the state license before issuing commercial permits.

Columbus. Building and Zoning Services registers a General Contractor under Chapter 4114 of the Columbus Building Code. The registration "can be associated with all permits to build new 1, 2, or 3 family, multi-family (4 or more dwelling units), and commercial structures, as well as alter or add to existing multi-family and commercial structures." The filing is a notarized application, "a Bond in the amount of $25,000" on the city's own bond form under C.C. 4114.515, and a certificate of liability insurance with "limits of liability no less than $300,000.00 for damages to a single person and $500,000.00 for one occurrence", naming Building and Zoning Services as certificate holder. There is no exam, experience, reference or financial requirement, and no board hearing - the General Contractor registration is one of the few Columbus categories that does not go before a review board. The 2026 fee schedule sets a $350 annual contractor license and registration fee, with $100 for a change of assignment or elective suspension; the registration runs to "the end of the twelfth month from the date of issuance." 111 North Front Street, (614) 645-7433, [email protected].

Cleveland. The Department of Building & Housing requires that contractors "must be bonded, insured, and registered" and that "contractors must be registered with the City of Cleveland within their trade in order to obtain permits. Separate permits are required for each separate trade, i.e. general, plumbing, HVAC, electrical, and elevator." Registration sits in Chapter 3107 of the Codified Ordinances, Registration of Contractors, which provides for a Certificate of Registration and a Limited Certificate of Registration with separate qualifications for each. A General Contractor Registration Application package is published in the Contractor Packages section of the city's construction permitting resources page, and the bond, insurance and fee figures are stated in that package and in Chapter 3107 rather than on the department's web pages - confirm them with Building & Housing on 216-664-2910 before filing. Registration status is verified on 216-664-2884, and electrical, plumbing and HVAC registrations require the OCILB state license first.

Cincinnati. Buildings & Inspections registers contractors under Chapter 1106 of the Municipal Code, and commercial builders fall in the Building Construction Contractor class, the catch-all that "will apply to all other contractors that are not addressed in the two previous descriptions" and covers specialties such as crane operations, demolition, carpentry, masonry and glazing alongside new one-, two- and three-family construction. Electrical, plumbing, HVAC, hydronic and refrigeration firms register in the separate OCILB Licensed Specialty Contractor class on their state licenses, and that city registration runs to the state license's expiry date. The filing is the signed application, liability insurance with "minimum liability limits of one hundred thousand dollars ($100,000) for damages to a single person, and three hundred thousand dollars ($300,000) for one (1) occurrence" (crane operators carry $1,000,000 per occurrence, $2,000,000 aggregate and a $4,000,000 or $10,000,000 umbrella depending on lift capacity), proof of Ohio workers' compensation, an assignment form listing everyone authorized to sign permit applications, and a federal tax ID. The fee is $125.00 plus surcharges, $131.25 a year, for up to three years; same-day processing is $208 extra. There is no exam and no bond. A company operating under more than one business name needs a separate registration for each legal entity, and where a company holds several OCILB licenses through different people, each license holder registers separately. 805 Central Avenue, Suite 500, (513) 352-3271.

Akron and Summit County. Akron requires "all contractors regardless of trade to register as a contractor if the work they are performing requires a permit to do the work", on a contractor registration application with an Akron Tax Registration Number, a certificate of liability insurance, state licenses where the trade needs one, and workers' compensation coverage unless there are no employees. No exam or fee is published. Ohio Building Code permits for Akron projects come from the Summit County Department of Building Standards, which since March 2024 has run "a permit-based process" in place of annual contractor registration: "the $135 annual fee for contractors and the requirement for a $10,000 bond are now eliminated", while "contractors will still be required to provide liability insurance, State license if applicable, and a Tax ID Number", and commercial application fees rose by $10. Akron Plans & Permits, 1030 E. Tallmadge Ave., 330-375-2010; Summit County Building Standards, same address, 330-630-7280.

Toledo. Toledo licenses Electrical, Mechanical, Plumbing, Fire, Home Improvement and Remodeling, Sign and Sidewalk contractors, plus journeymen and apprentices in the electrical, HVAC, plumbing and refrigeration trades. There is no commercial or general building contractor license, so a commercial builder in Toledo pulls permits without a city contractor credential while the trades hold theirs. All Toledo licenses renew annually and expire December 31. Division of Building Inspection, One Government Center, Suite 1600, 419-245-1220.

Dayton. The Division of Building Inspection publishes registration and bond forms only for electrical, plumbing, warm air heating and pipe-laying contractors. Dayton has no general or building contractor registration; a commercial builder works through the registered trades. Building Inspection, 937-333-3979; One Stop Center, 371 West Second Street, 937-333-3883.

Cuyahoga County. A Division of Building Standards was created in 2025 to serve partner communities with contractor registration, plan review, permitting and inspections, with registration "completed through a secure online portal" on its site. The partner community list is still being announced and "an approved fee schedule will be released by December 1, 2026", so check the state's building department look-up tool for a specific address before assuming which department has jurisdiction. [email protected].

What does and does not travel. An out-of-state general contractor license, a NASCLA Accredited Examination and out-of-state project experience carry no weight in any of these jurisdictions, because none of them tests or qualifies commercial builders at all. What does matter is holding, or employing someone who holds, the OCILB license for each of the five state-licensed trades in scope, then registering that license with the city as well. OCILB's own reciprocity list is the only place an out-of-state license shortens the path, and every entry on it - Alabama, Arkansas, Kentucky, Louisiana, Mississippi, North Carolina, South Carolina, Tennessee, Texas, Virginia and West Virginia - is scoped to the electrical, HVAC, refrigeration, plumbing or hydronics trades, so those routes belong on this site's electrical, HVAC and plumbing pages rather than here.

Moving to OhioLeaving Ohio

Common questions

Do I have to take the Hawaii general contractor exam if I'm licensed in Ohio?
Yes. Hawaii requires the trade exam on this path, plus a law or code exam.
What does it cost to get a Hawaii general contractor license from Ohio?
Published fees on this path total $50, not counting exam vendor fees or bonds.
Do my Ohio work hours count in Hawaii?
Yes. Documented out-of-state experience counts toward Hawaii's eligibility requirements.
Does it work the other way, from Hawaii to Ohio?
Not necessarily. Reciprocity is directed. Going from Hawaii to Ohio, the mechanism is not applicable.

Sources

  1. Contractors License Board Application Forms and Publications - DCCA Hawaii · Hawaii DCCA, Professional and Vocational Licensing Division · Agency Page · verified September 17, 2026
  2. Contractors License Board - Hawaii Department of Commerce and Consumer Affairs · Hawaii DCCA, Professional and Vocational Licensing Division · Agency Page · verified September 17, 2026
  3. Bond Form - Contractors License (form CT-09, rev. 09/2013) · Hawaii DCCA, Contractors License Board · Form · verified September 17, 2026
  4. Description of Contractor License Classifications - Hawaii Contractors License Board · Hawaii DCCA, Contractors License Board · Other · verified September 17, 2026
  5. Contractors License Board Examination - Application Deadline and Examination Dates · Hawaii DCCA, Professional and Vocational Licensing Division · Agency Page · verified September 17, 2026
  6. Contractor Frequently Asked Questions - Hawaii Contractors License Board · Hawaii DCCA, Professional and Vocational Licensing Division · Faq · verified September 17, 2026
  7. Contractors Financial Statement (prescribed form CT-02, rev. 11/2017) · Hawaii DCCA, Contractors License Board · Form · verified September 17, 2026
  8. Requirements for License - Contractor, Entity (Form CT-00, rev. 10/2025) · Hawaii DCCA, Contractors License Board · Form · verified September 17, 2026
  9. Requirements for License - Contractor, Responsible Managing Employee (Form CT-00(A), rev. 10/2025) · Hawaii DCCA, Contractors License Board · Form · verified September 17, 2026
  10. Requirements for License - Contractor, Sole Proprietor (rev. 10/2025) · Hawaii DCCA, Contractors License Board · Form · verified September 17, 2026
  11. Hawaii Administrative Rules Title 16, Chapter 77 - Contractors · HAR 16-77-6, 16-77-8, 16-77-11, 16-77-12, 16-77-28, 16-77-32, 16-77-33, 16-77-35, 16-77-39 to 16-77-46, 16-77-54, 16-77-55, 16-77-71, 16-77-76, 16-77-89 · Hawaii DCCA, Contractors License Board · Admin Rule · verified September 17, 2026
  12. HRS 444-11 - No license issued when (contractor qualifications) · HRS 444-11 · Hawaii State Legislature · Statute · verified September 17, 2026
  13. HRS 444-7 - Classification (contractors) · HRS 444-7 · Hawaii State Legislature · Statute · verified September 17, 2026
  14. HRS 444-9 - Licenses required (contractors) · HRS 444-9 · Hawaii State Legislature · Statute · verified September 17, 2026
  15. NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related