LicensebyState

Ohio to Hawaii: residential contractor license reciprocity

No credit· Start overVerified September 17, 2026· 15 sources

Ohio does not issue a statewide residential contractor license, so there is nothing to transfer. Here is Hawaii's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

Out-of-state experience credited toward the four years, full Hawaii examination (every state)

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

The Board answers the question directly in its own FAQ: Hawaii has no reciprocity agreements with other states, and all applicants meet the same licensing and examination requirements. There is no verification-of-licensure form, no examination waiver and no NASCLA route, and a license held elsewhere is never exchanged for a Hawaii one. What an out-of-state builder does carry across is the work behind the license. The qualifying person must show four full years of supervisory experience within the past ten years in the classification applied for, and years spent supervising under another state's license count in full: the Board asks for proof of licensure, and an out-of-state contractor who held a license in that state is one of the people who may sign an experience certificate. The paperwork is the same for everyone. At least three notarized experience certificates, at least one for each classification and no two in a classification from the same person, plus a Chronological History of Projects listing every job, the trades subcontracted and the actual on-site supervision time. The Board reviews complete applications at its monthly meeting, then approves the applicant to sit the Hawaii examinations, which must be passed within six months.

Both examination parts are taken for the Class B general building classification: part I on Hawaii building, safety, health, labor and lien law and the administrative principles of contracting, part II on trade knowledge in the classification. Seventy-five percent is the pass mark for each part. The Board's examination page says the examinations moved to PSI Services LLC in January 2023, while the October 2025 requirement sheets still name Prometric; the examination approval letter names the testing agency, the examinations the applicant is eligible for and the date they must be passed by. HAR 16-77-41 excuses an examination only where the applicant previously qualified by written examination within four years and is applying in the same classification, which is about a lapsed Hawaii credential rather than an out-of-state one. Applying for the Class B license at the same time as a Class C specialty license needs a separate part II examination and a separate project list for each classification.

At a glance

Trade exam
Required
Law / code exam
Required
Out-of-state hours
Count toward eligibility

What you must already have

  • Four full years of supervisory experience within the ten years immediately before the application, in the classification applied for, at the level of journeyman, foreman, supervisor or contractor, counting only time actually spent on site supervising and directing employees.HRS 444-11(a)(2) lets the Board accept experience acquired on a self-employed or unlicensed basis where it can be verified. Technical training may be approved as acceptable experience but never counts for more than one year. Design time, ordering materials and scheduling around rain-outs or deliveries do not count.
  • Supervisory years worked under another state's contractor license count toward the four years. The Board asks an applicant with licensed experience elsewhere to provide proof of licensure, and an out-of-state contractor who held a license in that state may sign an experience certificate. The proof of licensure does not replace the certificates or the project list.
  • You must have no disciplinary action or unresolved complaints on your record.
  • The qualifying person must be at least eighteen and, unless applying as a sole proprietor, must be employed by the licensed contracting entity as its Responsible Managing Employee. The principal RME must be in residence in Hawaii while the entity's license is in effect or a project is under construction, and a licensee must keep a physical place of business in the State; a post office box is not accepted.

What you'll do to get licensed in Hawaii

  1. 1Law / code exam. Pass a law, rules, or code exam. Part I of the contractor examination: the building, safety, health, labor and lien laws of Hawaii and the basic administrative principles of the contracting business. Seventy-five percent is needed to pass. It is never waived for an out-of-state applicant. The Board strongly recommends obtaining a copy of the contractor licensing law and rules before sitting it..
  2. 2Trade exam. Pass the destination's trade exam. Part II of the contractor examination: trade knowledge in the classification requested, here Class B general building. Seventy-five percent is needed to pass. The applicant registers with the testing agency only after the Board approves the application and issues an examination approval letter, and must pass both parts within six months or file a new application and fee. A failed part may be retaken for a further fee inside that six-month window..
  3. 3Application fee. Pay the application fee ($50). $50 nonrefundable application fee for each application filed, payable to Commerce and Consumer Affairs. More than one classification may be requested on a single application, but a contracting entity and its Responsible Managing Employee file separate applications and pay the fee separately, so an inbound company and its qualifying person pay $50 each. A further $10 contractors education fund fee accompanies every application, and a dishonored payment carries a $25 service charge..
  4. 4Exam fee. Pay the exam fee. Examination fees are paid directly to the testing agency when the approved applicant registers, and are charged for each part taken. The Board's published FAQ lists $75 per part, with most classifications taking both parts, but that document dates from before the examinations moved to PSI Services LLC, so confirm the current amount with PSI on (833) 333-4754 before registering. An interpreter, if the Board approves one, adds $100 to the examination fee..
  5. 5License fee. Pay the license or certificate fee. The Board assesses the license fee after the application is approved and the examinations are passed, telling the applicant the exact amount at that point. Its published FAQ gives $663 for a contracting entity or sole proprietor licensed in the first year of the two-year cycle and $494 in the second, and $438 or $334 on the same split for a Responsible Managing Employee, so budget for both. Licenses run to September 30 of the next even-numbered year whatever date they were issued. On-time renewal currently costs $338 for an entity or sole proprietor, $208 for an RME and $160 for an inactive license, plus $5 education fund and $10 recovery fund fees..
  6. 6Financial responsibility. Show financial responsibility. A current financial statement, dated within one year, that is compiled, reviewed or audited and accompanied by an independent accountant's report from a CPA or public accountant holding a current permit to practice; an accountant licensed in another state attaches a copy of that license. For compiled and reviewed statements the applicant also signs the Board's own Financial Statement form CT-02 whether or not the accountant used it. The Board publishes no minimum net worth or working capital figure: it weighs the statement together with the credit reports and the tax clearance to decide whether the applicant has financial integrity, and whether to impose a bond. RMEs do not file a financial statement; the entity or sole proprietor does..
  7. 7Surety bond. Post a surety bond (if applicable). A surety bond is not automatic in Hawaii. The Board may require one as proof of financial integrity, and sets the amount case by case; the bond form leaves the penal sum blank. Where one is imposed, it runs to the State of Hawaii on form CT-09, is conditioned on compliance with HRS chapter 444 and on paying employees' wages, is continuous, and can be canceled by the surety only on thirty days' written notice. Both the applicant and the surety notarize it. After a licensee has maintained the bond for at least a year it may ask the Board to waive it on proof of financial integrity, supported by current credit reports, financial statements and a tax clearance..
  8. 8Insurance. Carry the required insurance. A certificate of comprehensive liability and property damage insurance with minimum limits of $100,000 bodily injury each person, $300,000 bodily injury each occurrence and $50,000 property damage each occurrence, plus a workers' compensation certificate from a carrier authorized in Hawaii or proof of self-insurance or exclusion. An out-of-state contractor may use a non-admitted carrier where the producer qualifies for an exemption under HRS 431:9A-104(b)(6). Coverage must be continuous for the life of the license: a lapse forfeits both the entity and the RME license automatically, and if it is not restored within sixty days both must apply as new applicants. Certificates are filed fastest through the Board's online insurance submittal system..
  9. 9Business license. Obtain a business license. The contracting entity must be registered with the DCCA Business Registration Division before it can be licensed: a Hawaii corporation or LLC files a stamped copy of its articles, a foreign corporation its certificate of authority and a partnership its registration statement, and an entity registered for more than a year attaches a Certificate of Good Standing issued within the past year. Any trade name must be separately registered and a filed-stamped copy supplied. A current Hawaii tax clearance, issued within six months, is filed with the application and again at every renewal, and the name on it must match the license name exactly..
  10. 10Background check. Complete a background check. A current and complete credit report for each officer, partner, manager or member, issued not more than six months earlier and covering at least the previous five years, showing each current and past debt, its status and any public records; a summary or a bare credit score is not accepted. Where a partner or member is itself a business, the credit reports of its officers or a comprehensive business credit report are filed instead. The RME files a credit report with the RME application as well..
  11. 11Continuing education. Complete continuing education (if applicable). Hawaii imposes no continuing education requirement on contractors. Renewal by September 30 of each even-numbered year instead turns on continued financial integrity: a current tax clearance or payment arrangement, a statement about any liens, undisputed debts or judgments, proof that workers' compensation and liability coverage have been maintained without a break, and proof that any bond the Board imposed is current..
  12. 12Other. The application, fee and every supporting document must reach the Board's Honolulu office on or before the first Tuesday of the month before the meeting at which it will be considered; the Board meets monthly except in December, and faxed or emailed copies are not accepted. An application is abandoned if licensure is not completed within a year of filing or the examinations are not passed after eligibility, and the Board keeps a denied application for two years. A Social Security number must be given or the application is treated as deficient..

Published fees on this path total $50, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Law / code exam
  • Trade exam
  • Exam fee

Surety bond

A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.

  • Surety bond · if applicable

Liability insurance

Some states require proof of general liability or workers' compensation coverage at licensing time.

  • Insurance

Business registration

If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.

  • Business license

Continuing education

Renewals usually need approved CE hours, often on the latest NEC. Reciprocal licensees are rarely exempt.

  • Continuing education · if applicable

How Hawaii licenses residential contractors

Hawaii residential contractor · “Class B General Building Contractor (no separate residential class)

Statewide license

Verified September 17, 2026· 9 sources

Issued by Hawaii Contractors License Board (DCCA Professional and Vocational Licensing Division)

Hawaii has no residential contractor license. The Contractors License Board, in the Department of Commerce and Consumer Affairs, classifies every contractor into exactly three branches under HRS 444-7: Class A general engineering, Class B general building and Class C specialty. Houses fall inside Class B, which covers any structure built for the support, shelter and enclosure of persons or property whose construction uses more than two unrelated building trades, so a homebuilder in Hawaii holds the same license as a commercial builder and this page points at Class B for both levels. Two limits are worth knowing. A Class B license does not let the holder take a contract that needs only one or two unrelated trades unless the holder also carries the matching Class C specialty license, and it never covers electrical or plumbing work, which needs both the C-13 or C-37 classification and an individually licensed electrician or plumber. The license is entity-held and qualified by a named person: a corporation, partnership, joint venture, LLC or LLP is licensed only while it employs a licensed Responsible Managing Employee, the RME sits the examinations and proves the experience, and the two file separate applications and pay separate fees. An individual who will trade in their own name applies instead as a licensed sole proprietor.

Moving to HawaiiLeaving Hawaii

Why Ohio has nothing to transfer

Ohio residential contractor · “Home improvement / remodeling contractor license or registration (city-issued)

Licensed by cities and counties

Verified September 17, 2026· 22 sources

Issued by No state authority; cities and counties license and register residential contractors

Ohio issues no statewide residential building, home builder or home improvement contractor license. The Ohio Construction Industry Licensing Board (OCILB), in the Department of Commerce, licenses individual contractors in five commercial trades only - electrical, HVAC, refrigeration, plumbing and hydronics - and its own page states that "all local building and health departments regulate residential contractors"; the Department of Commerce says plainly that "while residential contractors are not required to be licensed by the state, local building departments throughout Ohio may have their own verification or licensing requirements." Housing work is therefore licensed or registered jurisdiction by jurisdiction, and the rules vary a great deal: Columbus and Toledo run real competency licenses built on the ICC Ohio home improvement and building contractor examination (exam ID 767-OH-GC), documented experience and a board hearing, while Cleveland, Cincinnati and Akron require registration backed by insurance, bonding or workers' compensation but no exam, and Dayton registers only the trades. A remodeler moving to Ohio has no state license to transfer and no state reciprocity to apply for, so the practical work is qualifying or registering in each place where they pull permits and carrying the insurance each one demands. The credential that actually travels is the ICC contractor examination rather than another state's license. Anyone who self-performs electrical, HVAC, refrigeration, plumbing or hydronics work still needs the matching OCILB state license, and Ohio's only statewide residential construction statute, R.C. Chapter 4722, governs written contracts and down payments on home construction service contracts over $25,000 rather than licensing anyone.

How local licensing works in Ohio

How local licensing works. Ohio has roughly 800 certified building departments, and each city, county or township decides for itself whether residential contractors are licensed, registered or left alone. A credential from one Ohio jurisdiction does not carry into the next one, and none of the jurisdictions below grants anything for a license held in another state. Use the Board of Building Standards jurisdiction map at com.ohio.gov/JurisdictionMap to find out which department has authority over a given address before applying anywhere.

Columbus. Building and Zoning Services licenses residential work under Chapter 4114 of the Columbus Building Code. A Home Improvement General Contractor license covers structural work on existing one-, two- and three-family dwellings and their accessory structures. It requires "a score of 70% or higher for 767 Ohio Home Improvement Contractor" (the ICC exam, booked through the International Code Council on (877) 783-3926), a "minimum of three (3) full years of hands-on experience in the one (1), two (2), and three (3) family home improvement field", and approval by the Board of Review of General and Home Improvement Contractors, which meets on the first Wednesday of each month and needs the notarized application at least seven days beforehand. A Home Improvement Limited Contractor license covers roofing, siding, decking, waterproofing, fencing, driveway approaches and similar specialized work and requires one full year of hands-on experience in that field plus board approval. A builder putting up new houses registers instead as a General Contractor, which covers "all permits to build new 1, 2, or 3 family, multi-family (4 or more dwelling units), and commercial structures" and needs a $25,000 bond on the city's bond form and liability insurance of at least $300,000 for damages to a single person and $500,000 per occurrence, with no exam. The 2026 fee schedule sets a $300 application fee for the board-reviewed licenses (including Home Improvement Contractor and HIC-Limited) and a $350 annual license and registration fee; a change of assignment is $100. Registrations expire at the end of the twelfth month from issuance. Building and Zoning Services, 111 North Front Street, (614) 645-7433, [email protected].

Toledo. The Division of Building Inspection licenses "contractors engaged in the business of making improvements to residential structures regulated by the Residential Code of Ohio" under Toledo Municipal Code Chapter 1313, in two tiers. A Certified Remodeling Contractor "may engage in all residential construction, alterations and renovations" and must first pass the ICC Building Contractor C examination (exam ID 767-OH-GC, delivered by Pearson VUE, nearest center in Maumee) and then the City of Toledo Certified Remodeling Exam covering Chapters 11 and 13 of the Municipal Code. A Limited Remodeling Contractor is "restricted to residential improvements such as roof and window replacement, siding application, installation of insulation, fencing, and swimming pools greater than 24 inches in depth" and sits only the city exam, which covers Chapter 13 and the 2024 International Residential Code. Both exams are open book. Applications go first to the city's Board of Control for Home Improvement and Remodeling Contractors, which decides whether the applicant may test, and the applicant must document one of four qualifications: a two-year degree in construction management, architecture or engineering; a licensed journeyman certificate in a construction trade; five years working in general building construction under a licensed remodeler, homebuilder or general contractor, evidenced by a notarized employer statement and five years of tax records; or five years self-employed on construction projects, evidenced by a notarized resume and five years of tax records. Three unrelated references and a full employment history are filed with the application. The fee is $200, of which $175 is refunded if the Board of Control finds the applicant unqualified to test. After passing, a Certificate of Compliance from the Division of Taxation is required before the license issues, and holders must carry liability insurance "in the amount of $100,000 to $300,000." Licenses renew annually and expire December 31; ten hours of continuing education are required each year. One Government Center, Suite 1600, 419-245-1220.

Cleveland. The Department of Building & Housing states that "to build or rehabilitate Cleveland homes, contractors must be bonded, insured, and registered", and that "contractors must be registered with the City of Cleveland within their trade in order to obtain permits. Separate permits are required for each separate trade, i.e. general, plumbing, HVAC, electrical, and elevator." Registration runs under Chapter 3107 of the Codified Ordinances, Registration of Contractors, which provides for both a Certificate of Registration and a Limited Certificate of Registration and sets separate qualifications for each. The city publishes a General Contractor Registration Application package in the Contractor Packages section of its construction permitting resources page; the bond amount, insurance limits and fee are set out in that package and in Chapter 3107 rather than on the department's web pages, so confirm them with Building & Housing on 216-664-2910 before filing. Registration status can be checked on 216-664-2884. Electrical, plumbing and HVAC contractors must hold the OCILB state license before the city will register them.

Cincinnati. The Department of Buildings & Inspections registers contractors under Chapter 1106 of the Municipal Code in three classes, two of which reach housing. A Home Improvement Contractor registration covers "all contractors that are involved in repair, remodeling, alteration, improvement, or addition to any building used as a private residence in one, two and three family structures." A Building Construction Contractor registration covers everything else, and expressly "include[s] contractors that engage in the construction of new one, two and three family dwellings" as well as specialties such as demolition, carpentry, masonry and glazing. The filing is the signed application, a certificate of liability insurance from an Ohio-licensed insurer with "minimum liability limits of one hundred thousand dollars ($100,000) for damages to a single person, and three hundred thousand dollars ($300,000) for one (1) occurrence", proof of Ohio workers' compensation, an assignment form naming everyone allowed to sign permit applications, and a federal tax ID or Social Security number. The fee is $125.00 plus a 3% technology surcharge, a 1% financial recovery fee and a 1% training surcharge, a total of $131.25 a year, and a registration may be bought for up to three years; same-day processing costs $208 more and mid-term changes $78. There is no exam, experience or bond requirement. An owner of a one-, two- or three-family dwelling is exempt where they personally perform the work and will occupy the home for at least a year. Working unregistered draws a $750 citation for a first offense. 805 Central Avenue, Suite 500, (513) 352-3271.

Akron and Summit County. Akron's rule is short: "the City of Akron requires all contractors regardless of trade to register as a contractor if the work they are performing requires a permit to do the work." The filing is the contractor registration application, an Akron Tax Registration Number, a certificate of liability insurance, any state licenses the trade requires, and proof of workers' compensation unless there are no employees. There is no exam and no published registration fee. The building permits themselves come from the Summit County Department of Building Standards, which in March 2024 replaced annual contractor registration with a permit-based process: "the $135 annual fee for contractors and the requirement for a $10,000 bond are now eliminated", though "contractors will still be required to provide liability insurance, State license if applicable, and a Tax ID Number." The same code change requires that property owners working on homes they do not and will not occupy have a qualified contractor take responsibility for the installations. Akron Plans & Permits, 1030 E. Tallmadge Ave., 330-375-2010; registration questions 330-375-2037. Summit County Building Standards, same address, 330-630-7280.

Dayton. The Division of Building Inspection publishes registration and bond forms only for electrical, plumbing, warm air heating and pipe-laying contractors, with separate plumbing journeyman and apprentice forms. There is no Dayton registration for a remodeler or a homebuilder as such; a residential builder pulls permits and hires or employs the registered trades. Building Inspection, 937-333-3979; One Stop Center, 371 West Second Street, second floor, 937-333-3883.

Cuyahoga County. The county created a Division of Building Standards in 2025 "with the mission of improving compliance with State of Ohio Board of Building Standards for both residential and commercial/non-residential construction within the County." It will provide contractor registration, plan review, permitting and inspections for partner communities, with registration "completed through a secure online portal" on its website; the partner community list is still being announced and an approved fee schedule is due by December 1, 2026. The county notes that it "does not offer formal endorsement, evaluation, or recommendation of any contractors or construction services" and directs residents to the state's building department look-up tool for their address. [email protected].

Everywhere else. The remaining hundreds of Ohio municipalities, townships and county building departments each set their own rules, from a full licensing board to nothing beyond a permit and proof of insurance. Identify the department with jurisdiction over the address first, then ask what it registers. Whatever the local answer, the statewide obligations are the same: an OCILB license for any self-performed electrical, HVAC, refrigeration, plumbing or hydronics work, and a written contract meeting R.C. Chapter 4722 for any home construction service contract over $25,000.

Moving to OhioLeaving Ohio

Common questions

Do I have to take the Hawaii residential contractor exam if I'm licensed in Ohio?
Yes. Hawaii requires the trade exam on this path, plus a law or code exam.
What does it cost to get a Hawaii residential contractor license from Ohio?
Published fees on this path total $50, not counting exam vendor fees or bonds.
Do my Ohio work hours count in Hawaii?
Yes. Documented out-of-state experience counts toward Hawaii's eligibility requirements.
Does it work the other way, from Hawaii to Ohio?
Not necessarily. Reciprocity is directed. Going from Hawaii to Ohio, the mechanism is not applicable.

Sources

  1. Contractors License Board Application Forms and Publications - DCCA Hawaii · Hawaii DCCA, Professional and Vocational Licensing Division · Agency Page · verified September 17, 2026
  2. Contractors License Board - Hawaii Department of Commerce and Consumer Affairs · Hawaii DCCA, Professional and Vocational Licensing Division · Agency Page · verified September 17, 2026
  3. Bond Form - Contractors License (form CT-09, rev. 09/2013) · Hawaii DCCA, Contractors License Board · Form · verified September 17, 2026
  4. Description of Contractor License Classifications - Hawaii Contractors License Board · Hawaii DCCA, Contractors License Board · Other · verified September 17, 2026
  5. Contractors License Board Examination - Application Deadline and Examination Dates · Hawaii DCCA, Professional and Vocational Licensing Division · Agency Page · verified September 17, 2026
  6. Contractor Frequently Asked Questions - Hawaii Contractors License Board · Hawaii DCCA, Professional and Vocational Licensing Division · Faq · verified September 17, 2026
  7. Contractors Financial Statement (prescribed form CT-02, rev. 11/2017) · Hawaii DCCA, Contractors License Board · Form · verified September 17, 2026
  8. Requirements for License - Contractor, Entity (Form CT-00, rev. 10/2025) · Hawaii DCCA, Contractors License Board · Form · verified September 17, 2026
  9. Requirements for License - Contractor, Responsible Managing Employee (Form CT-00(A), rev. 10/2025) · Hawaii DCCA, Contractors License Board · Form · verified September 17, 2026
  10. Requirements for License - Contractor, Sole Proprietor (rev. 10/2025) · Hawaii DCCA, Contractors License Board · Form · verified September 17, 2026
  11. Hawaii Administrative Rules Title 16, Chapter 77 - Contractors · HAR 16-77-6, 16-77-8, 16-77-11, 16-77-12, 16-77-28, 16-77-32, 16-77-33, 16-77-35, 16-77-39 to 16-77-46, 16-77-54, 16-77-55, 16-77-71, 16-77-76, 16-77-89 · Hawaii DCCA, Contractors License Board · Admin Rule · verified September 17, 2026
  12. HRS 444-11 - No license issued when (contractor qualifications) · HRS 444-11 · Hawaii State Legislature · Statute · verified September 17, 2026
  13. HRS 444-7 - Classification (contractors) · HRS 444-7 · Hawaii State Legislature · Statute · verified September 17, 2026
  14. HRS 444-9 - Licenses required (contractors) · HRS 444-9 · Hawaii State Legislature · Statute · verified September 17, 2026
  15. NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related