Pennsylvania to North Carolina: general contractor license reciprocity
Pennsylvania does not issue a statewide general contractor license, so there is nothing to transfer. Here is North Carolina's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
NASCLA Accredited Examination in place of the North Carolina Building Contractor examination
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
North Carolina does not recognize an out-of-state general contractor license on its own, but it does accept the NASCLA Accredited Examination for Commercial General Building Contractors in place of its own Building Contractor trade examination. That route is open to anyone regardless of which state licensed them: sit the NASCLA examination before applying, then file the North Carolina application with the NASCLA pass letter and transcript purchase receipt attached and take the North Carolina Business and Law examination. Everything else still applies in full, including the financial responsibility figure for the limitation requested, the background check, character references and entity registration. An applicant who does not hold the NASCLA credential and comes from a state without a waiver agreement simply takes the North Carolina Building Contractor examination instead: 90 questions, 200 minutes, 70% to pass. North Carolina requires no trade experience for licensure, so out-of-state years do not shorten any step.
The Board confirms NASCLA acceptance on its own contractor FAQ and in 21 NCAC 12A .0303(c), which names the NASCLA examination alongside an origin state examination as the qualifying exam. The FAQ states acceptance for the Building classification; it does not say the NASCLA examination is accepted for the Residential classification. The NASCLA examination is bought and scheduled from NASCLA, not from the Board or PSI, and it is taken before the North Carolina application is filed. Without NASCLA and without a waiver agreement, substitute the North Carolina Building Contractor examination for the waived trade examination below; the Business and Law examination is then part of that classification examination rather than a separate sitting.
At a glance
- Trade exam
- Waived
- Law / code exam
- Required
- Out-of-state hours
- Do not count
What you must already have
- You must have passed a licensing exam in Pennsylvania that the destination considers comparable.NASCLA Accredited Examination for Commercial General Building Contractors, passed before the North Carolina application is filed. The Board asks for the NASCLA pass letter and the transcript purchase receipt to be attached to the application.
- The qualifier is at least 18 years old and possesses good moral character as determined by the Board (G.S. 87-10). North Carolina sets no minimum trade experience or apprenticeship hours for a general contractor license.
What you'll do to get licensed in North Carolina
- 1Law / code exam. Pass a law, rules, or code exam. North Carolina Business and Law examination: 40 questions, 90 minutes, 70% to pass, covering erosion and sedimentation control, licensing, liens, contracts, project management, safety and business practices. Required of applicants who qualify on the NASCLA examination rather than the North Carolina Building Contractor examination..
- 2Trade exam. Pass the destination's trade exam (if applicable). Not required if the NASCLA Accredited Examination has been passed. Otherwise the North Carolina Building Contractor examination applies: 90 questions, 200 minutes, 70% to pass, open book, administered by PSI Services LLC after the Board issues an eligibility letter..
- 3Application fee. Pay the application fee ($75). Nonrefundable application fee set by the limitation requested: $75 for a limited license, $100 for an intermediate license and $125 for an unlimited license (G.S. 87-10(a1); 21 NCAC 12A .0304(a)). The amount shown is the limited-license fee..
- 4Exam fee. Pay the exam fee ($79). $79 per examination, paid to PSI Services LLC when the examination is scheduled. The NASCLA examination itself is bought from NASCLA and is not covered by this fee..
- 5Financial responsibility. Show financial responsibility of at least $17,000. Evidence of financial responsibility for the entity that will hold the license. Current assets must exceed current liabilities by at least $17,000 for a limited license (or total net worth of at least $80,000), $75,000 for an intermediate license, or $150,000 for an unlimited license. Intermediate and unlimited applicants must show the figure in an agreed-upon procedures report on the Board form or an audited financial statement prepared by a CPA or independent accountant. Statements must be no more than twelve months old and conform to GAAP (21 NCAC 12A .0204). The amount shown is the limited-license working capital figure..
- 6Surety bond. Post a surety bond ($175,000) (if applicable). Optional alternative to the working capital or net worth figure: a continuous surety bond of $175,000 for a limited license, $500,000 for an intermediate license or $1,000,000 for an unlimited license, from a surety authorized in North Carolina and rated Superior or Excellent by A.M. Best. Proof is filed with the application and with every annual renewal, and the bond must stay in force until the licensee can show the required working capital (21 NCAC 12A .0204(e))..
- 7Background check. Complete a background check. Criminal background check through the third-party vendor the Board names, paid directly to the vendor. Every qualifier submits to the check, along with the sole proprietor, the president of a corporation, all managers and members of an LLC, or all partners of a partnership (21 NCAC 12A .0303(b))..
- 8Business license. Obtain a business license. The license is issued to a legal entity, so the individual, corporation, LLC or partnership that will contract must be formed and, if organized outside North Carolina, authorized to transact business in the State before the license is issued (G.S. 87-10.1)..
- 9Insurance. Carry the required insurance (if applicable). The Board states there is no insurance or bonding requirement for a general contractor license itself. North Carolina workers compensation law still applies to the business independently of licensure, and owners, lenders and general contractors commonly require general liability coverage by contract..
- 10Continuing education. Complete continuing education. Renewal condition rather than an entry requirement: at least one qualifier on a building, residential or unclassified license must complete eight hours of Board-approved continuing education each year, made up of a two-hour mandatory course and six elective hours, with up to four elective hours carried forward (G.S. 87-10.2)..
- 11Other. Letters of character reference required by 21 NCAC 12A .0303(a)(9) and .0308, certified copies of court records for any criminal convictions of the applicant or its qualifiers, and disclosure of disciplinary history with this or any other licensing agency..
Published fees on this path total $154, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Law / code exam
- Trade exam · if applicable
- Exam fee · $79
Surety bond
A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.
- Surety bond · $175,000 · if applicable
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Business license
Liability insurance
Some states require proof of general liability or workers' compensation coverage at licensing time.
- Insurance · if applicable
Continuing education
Renewals usually need approved CE hours, often on the latest NEC. Reciprocal licensees are rarely exempt.
- Continuing education
How North Carolina licenses general contractors
North Carolina general contractor · “General Contractor, Building classification (Limited, Intermediate or Unlimited)”
Statewide license
Issued by North Carolina Licensing Board for General Contractors
The unlimited tier in North Carolina is the Building classification of the General Contractor license, issued by the North Carolina Licensing Board for General Contractors and required for any single undertaking costing $40,000 or more. The Building classification covers all building construction and demolition, commercial, industrial, institutional and residential alike, plus parking decks, site work and paving, storm drainage, retaining walls, recreational facilities and a list of specialty categories including concrete, masonry, roofing, metal erection, interior construction, swimming pools and asbestos. The Board also issues Highway, Public Utilities and Specialty classifications for work outside building construction, and separate North Carolina boards license the electrical, plumbing, heating and fire sprinkler trades. As with every classification, the license is held by a business and qualified by a named individual who passes the examination, and it carries a monetary limitation: Limited up to $750,000 per project, Intermediate up to $1,500,000, and Unlimited with no project cap, each set by the working capital, net worth or surety bond the applicant can show. North Carolina accepts the NASCLA Accredited Examination for this classification, and it holds examination waiver agreements with a short list of named states, but the Board states it does not have full reciprocity with any state.
Why Pennsylvania has nothing to transfer
Pennsylvania general contractor · “General Contractor License / Contractor License (city-issued)”
Licensed by cities and counties
Issued by No state contractor authority; city building and licensing departments
Pennsylvania issues no general, commercial or building contractor license, and the Department of Labor and Industry says so on its own contractor licensing page: "The Commonwealth of Pennsylvania currently has no licensure or certification requirements for most construction contractors (or their employees)." The statewide registration that does exist, the Home Improvement Contractor registration with the Office of Attorney General, is no help on commercial work, because the Home Improvement Consumer Protection Act reaches only private residences of one or two units and expressly excludes the construction of a new home, services for commercial or business use performed away from a private residence, and the conversion of commercial buildings to residential use. What Pennsylvania licenses at state level is a short list of specific activities: crane operators through the State Board of Crane Operators, asbestos and lead removal through Labor and Industry, and manufactured housing installers through the Manufactured Housing Improvement Act. Commercial building is controlled by the city instead. Philadelphia requires a Contractor License of any business doing construction, demolition or repair that does not need a specialized trade license, Pittsburgh requires a General Contractor License for all work under a Commercial Building Development Application, and Scranton requires a General Contractor License for multi-family residential of three or more units, commercial, demolition and industrial work. Because there is no state contractor examination, there is nothing for the NASCLA Accredited Examination to stand in place of: no Pennsylvania authority publishes acceptance of it, and none of the three city programs mentions it. There is likewise no reciprocity anywhere in Pennsylvania at this level, so a commercial contractor moving here applies city by city and carries the insurance each city demands.
How local licensing works in Pennsylvania
How it works in Pennsylvania. No state board licenses, examines or qualifies building contractors, so there is no qualifying party, no state trade or business-law exam, no state bond, no financial-responsibility test and no state credential for another state's license to convert into. Cities that license do it under their own ordinances through a licenses and inspections department, and their credentials are valid only inside their own boundaries. Two of the three largest programs test nothing at all: they turn on insurance, tax compliance, identification and, in one case, a federal lead-safety certification. Only Scranton asks for a passing score, and even that has an experience-and-references alternative.
Philadelphia. A Contractor License from the Department of Licenses and Inspections "is required for any business doing work that: Involves construction, demolition, or repair [and] Does not require a specialized company license." Complete demolition, electrical, fire suppression and plumbing each need their own specialized license instead. The company must hold a Business Income and Receipts Tax ID and a Commercial Activity License, be current on all City taxes, and file a Certificate of Insurance showing general liability of $500,000 per occurrence, automobile liability of $300,000 and workers' compensation of $100,000 per accident, $100,000 per employee and a $500,000 policy limit. The one competency element is safety training: "You must identify the supervisors responsible for construction projects. A supervisor can only be employed by one company. They must also show proof of completion of an approved OSHA 30 safety training course taken within five years of application date." The license fee is $126 and the renewal fee is $126, with a non-refundable $20 application fee applied to the license fee and the balance due on approval; renewing more than 60 days late costs 1.5% of the license fee for every month since expiry. Renewal keeps the same conditions, except that a supervisor whose OSHA 30 certificate L&I has already accepted may take 30 hours of construction or demolition safety continuing education instead of retaking the course. Apply through eCLIPSE or at the Permit and License Center, 1401 John F. Kennedy Blvd.; applications are reviewed within five business days. The governing ordinance is Philadelphia Code Title 9-1004.
Pittsburgh. The Department of Permits, Licenses and Inspections issues just two contractor licenses, General Contractor and Sign Contractor, and they do not overlap. A General Contractor License is required for all work performed under a Commercial Building Development Application, for new one- or two-family dwellings, for renovations and additions to rental or investment residential properties, and for commercial and residential demolition permits. Bring a valid photo ID, a general liability certificate of at least $1,000,000 each occurrence and $2,000,000 general aggregate, a workers' compensation certificate, a Tax Compliance Letter from the City's Department of Finance, and an EPA Renovation, Repair and Painting certification in lead-safe construction practices, which lasts five years. The 2026 fee schedule prices the General Contractor license at $90.00 for the initial application and $90.00 for each annual renewal, with a $50.00 late fee. Licenses expire 365 days from the date of issuance, with a 60-day grace period and late fees from day 31, after which the license lapses and you start again. Applications are handled entirely through OneStopPGH; PLI is at 412 Boulevard of the Allies, 412-255-2175.
Scranton. Code Enforcement requires a General Contractor License for "any other work done on a multi-family residential (3+ units), commercial, demolition, industrial, et. al." The license is issued to a named individual rather than a company, runs the calendar year, and takes two possible routes. Option A is the minimum paperwork plus "Exam Results demonstrating a passing score on a UCC exam or ICC exam in the relevant subject" - for a builder, the ICC General Construction Contractor category - and costs $225.00. Option B replaces the exam with four years of practical experience documented by W-2s or 1099s (or two years plus four years of relevant post-secondary education, counting each year of education as half a year of experience) and three reference letters: one from a contractor who employed the applicant, one from an ICC- or UCC-certified inspector who has inspected the applicant's work, and one from a licensed design professional. Option B costs $250.00. Renewal is $175.00 with a $50.00 late fee, due before your first permit of the calendar year or by March 31, whichever comes first. Everyone files identification, an indemnification statement, a disclosure statement covering litigation and any license revocation or suspension "by the City or any other jurisdiction," general liability, property damage and public liability insurance of $500,000 per person and $1,000,000 per occurrence, workers' compensation or an affidavit of no employees, an unsworn affidavit under 18 Pa.C.S. § 4904, and a Single Tax Office registration number. Scranton enforces the 2018 ICC series.
Allegheny County. The county licenses no contractors. Its permits and licenses are road and bridge, dog, food facility, lead and asbestos abatement, marriage, passports, plumbing, swimming pool and facility rentals, so outside Pittsburgh city limits a commercial contractor deals with the municipality's own code office.
Everywhere else. Most Pennsylvania municipalities enforce the Uniform Construction Code through permits, plan review and third-party inspection agencies without licensing contractors at all, and the Act allows them to charge a reasonable fee for that. Check each municipality's code office before bidding.
Arriving from another state. Nothing transfers. There is no state application to file, no endorsement or reciprocity route to ask about, and no Pennsylvania authority that accepts the NASCLA Accredited Examination or any other out-of-state contractor examination in place of a requirement, because the Commonwealth sets no examination requirement at all. The practical work is registering the business in Pennsylvania, buying the liability and workers' compensation cover each city specifies, getting the supervisor's OSHA 30 card for Philadelphia and the EPA lead-safe certification for Pittsburgh, and applying separately in every city where you will pull permits. If you also do home improvement work on one- and two-unit homes, register with the Office of Attorney General as well; that requirement is described at the residential level.
Common questions
- Do I have to take the North Carolina general contractor exam if I'm licensed in Pennsylvania?
- The trade exam is waived, but North Carolina requires a law or code exam.
- What does it cost to get a North Carolina general contractor license from Pennsylvania?
- Published fees on this path total $154, not counting exam vendor fees or bonds.
- Do my Pennsylvania work hours count in North Carolina?
- No. North Carolina does not credit out-of-state hours on this path.
- Does it work the other way, from North Carolina to Pennsylvania?
- Not necessarily. Reciprocity is directed. Going from North Carolina to Pennsylvania, the mechanism is not applicable.
Sources
- NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
- N.C.G.S. 87-10 - Application for license; examination; certificate; renewal · N.C.G.S. 87-10(a), (a1), (b), (c), (c1), (e) · North Carolina General Assembly · Statute · verified September 17, 2026
- N.C.G.S. 87-15.1 - Reciprocity of licensing · N.C.G.S. 87-15.1 · North Carolina General Assembly · Statute · verified September 17, 2026
- Classifications and limitations - NC Licensing Board for General Contractors · North Carolina Licensing Board for General Contractors · Agency Page · verified September 17, 2026
- FAQ for Contractors - NC Licensing Board for General Contractors · North Carolina Licensing Board for General Contractors · Faq · verified September 17, 2026
- Laws and Regulations Applicable to General Contracting in the State of North Carolina (2026 edition) · 21 NCAC 12A .0202, .0204, .0303, .0304, .0402, .0403, .0404 · North Carolina Licensing Board for General Contractors · Admin Rule · verified September 17, 2026
- License applicants - NC Licensing Board for General Contractors · North Carolina Licensing Board for General Contractors · Agency Page · verified September 17, 2026
- Licensure Application Questions - License Type Selector (online application preview) · North Carolina Licensing Board for General Contractors · Form · verified September 17, 2026
- State of North Carolina Licensing Board for General Contractors - Candidate Information Bulletin · PSI Services LLC for the North Carolina Licensing Board for General Contractors · Other · verified September 17, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.