South Dakota to Alaska: general contractor license reciprocity
South Dakota does not issue a statewide general contractor license, so there is nothing to transfer. Here is Alaska's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Registration with nothing carried over from another state (every state)
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
Alaska has no reciprocity, endorsement or examination waiver for contractors, and it does not participate in the NASCLA Accredited Examination. In practice that costs an inbound general contractor very little at this level, because Alaska asks nobody for an examination or for trade experience: the General Contractor registration is granted on a completed application, a $25,000 bond, insurance and fees. A contractor holding a demanding license in another state and a contractor with no license at all therefore file the same form and pay the same $350. What does not transfer is the right to work on homes: the residential contractor endorsement on this page's residential level takes a cold climate course and an Alaska examination that no out-of-state credential replaces. The division does not publish a processing time, saying only that an application generally takes several weeks once the complete packet has been submitted; progress can be tracked in the MY LICENSE portal and the program is reachable at [email protected] or (907) 465-2050.
Registration is required before any bid is submitted, not merely before work starts (AS 08.18.011(a)), and a general contractor may not award work to an unregistered specialty contractor. A partnership or joint venture counts as registered if one of the general partners or venturers whose name appears in the trading name is registered. Mechanical and electrical contractor registrations are separate categories that additionally require a Mechanical Administrator or Electrical Administrator license under AS 08.40; they are covered by the mechanical trades pages rather than here. Application documents and verifications from other licensing jurisdictions go stale after 12 months under 12 AAC 02.915, and an application is treated as abandoned after 12 months without correspondence, with the application fee forfeited.
At a glance
- Trade exam
- Waived
- Law / code exam
- Not required
- Out-of-state hours
- Do not count
What you must already have
- None about the applicant's history. AS 08.18.021 asks only for the type of contracting activity, the names and addresses of the owner, partners or corporate officers and statutory agent, and a Social Security number. There is no minimum experience, no apprenticeship, no examination and no qualifying individual for a general contractor registration in Alaska.
What you'll do to get licensed in Alaska
- 1Application fee. Pay the application fee ($100). $100 nonrefundable application fee filed with the General Contractor Registration Application (#08-4815), online through MyAlaska or on paper. It is not refunded if the application is denied or abandoned..
- 2License fee. Pay the license or certificate fee ($250). $250 registration fee, making $350 due with the application. Registrations run two years and expire on September 30 of even-numbered years whatever date they were issued, except one issued within 90 days of an expiration date, which runs to the next cycle. Renewal is filed online through MY LICENSE and requires current bond and insurance..
- 3Surety bond. Post a surety bond ($25,000). $25,000 surety bond running to the State on the division's Surety Bond form (#08-4971) with the surety's power of attorney attached, signed by both the contractor and the surety. It answers for state and local taxes, for labor, material and equipment suppliers, and for judgments arising from negligent or improper work, breach of contract or damage to public facilities. It must stay in force for three years until canceled by the surety, the principal or the department. A cashier's check cash deposit, or a time certificate of deposit or savings passbook made out to the State of Alaska in trust for the contractor, may be filed instead. A specialty contractor posts $10,000 and a handyman contractor $5,000..
- 4Insurance. Carry the required insurance. Public liability and property damage insurance covering Alaska contracting operations, with limits of at least $20,000 for damage to property, $50,000 for injury including death to any one person and $100,000 for injury including death to more than one person. The division's own Certificate of Insurance Coverage form (#08-4977) or a certificate from the carrier is accepted. Workers' compensation from an Alaska-admitted carrier, or a self-insurance certificate, is required if the business uses employee labor or is a corporation or LLC. Bond and insurance documents must reach the division within 30 days of issuance and must show the business name exactly as it appears on the application, including the entity name and any DBA..
- 5Business license. Obtain a business license. A corporation, LLC or other registered entity must already be on file with the division's Corporations Section, with its Alaska entity number given on the application, before the contractor application is processed. A State of Alaska business license under AS 43.70 is then obtained after the professional registration is issued. Advertising, contracts, signs and documents must carry the registered contractor name, the registration number, the mailing address and the principal place of business, or send customers to a website that carries all of them..
- 6Contractor license. Hold or obtain a contractor license (if applicable). Choosing the right category matters more in Alaska than qualifying for it. A business whose work uses not more than three trades registers as a Specialty Contractor instead, and one whose projects each have an aggregate contract price of $10,000 or less, counting all labor and materials, may register as a Handyman Contractor. Splitting a larger job into contracts under $10,000 to reach the lower bond is expressly treated as evasion. Mechanical and electrical contractor registrations additionally require a licensed Mechanical Administrator or Electrical Administrator under AS 08.40..
- 7Other. A signed application naming the DBA and every owner and principal officer or member, and a United States Social Security number on file with the division or a signed exemption request in its place. A business that believes it falls outside the chapter may file the division's Request for Exemption from Construction Contractors Regulation (#08-4809) rather than guessing..
Published fees on this path total $350, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Surety bond
A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.
- Surety bond · $25,000
Liability insurance
Some states require proof of general liability or workers' compensation coverage at licensing time.
- Insurance
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Business license
How Alaska licenses general contractors
Alaska general contractor · “General Contractor (registration without residential endorsement)”
Statewide license
Alaska's unlimited tier is the General Contractor certificate of registration issued by the Construction Contractors Program at the Division of Corporations, Business and Professional Licensing. It covers commercial work and operations that use three or more trades or that supervise mechanical and specialty subcontractors, and it carries no dollar limit. It is important to understand what this registration is and is not: AS 08.18 sets no examination, no experience and no qualifying individual for it, so it is a registration backed by money rather than a test of skill, and the only competency credential in the Alaska contractor scheme is the residential contractor endorsement that sits on top of it. The registration belongs to the business, which files a $25,000 surety bond or an equivalent cash deposit, public liability and property damage insurance, workers' compensation where employees are used, a $100 application fee and a $250 registration fee. Below this tier sit the Specialty Contractor registration, limited to work using not more than three trades and bonded at $10,000, and the Handyman Contractor registration, limited to projects with an aggregate contract price of $10,000 or less and bonded at $5,000. A general contractor may not build, remodel or bid residential work on a one-to-four-unit dwelling above 25 percent of the structure's value without the residential contractor endorsement.
Why South Dakota has nothing to transfer
South Dakota general contractor
Licensed by cities and counties
South Dakota has no state general, commercial or building contractor license and no state board that examines or qualifies builders, so there is nothing at state level for an out-of-state general contractor's license to transfer into. The Department of Labor and Regulation's occupational licensing list has an Electrical Commission, a Plumbing Commission and a Board of Technical Professions for architects and engineers, and no contractor board, so the credentials that matter at state level are the electrical and plumbing licenses held by the subcontractors and the design professionals who stamp the drawings. Commercial building is governed locally, and most of the state's larger cities license less at this level than at the residential one: Sioux Falls states that it 'does not require Commercial Building Contractors to be licensed at this time', Aberdeen says commercial contractors are not required to be licensed through the city because commercial projects are designed and overseen by architects and engineers, and Brookings publishes a residential contractor license and no commercial equivalent. Rapid City is the exception, licensing a Class A general contractor for construction of all types of structures on the ICC National Standard General Building Contractor (A) examination. Every contractor, commercial included, must hold a free contractor's excise tax license from the Department of Revenue before starting work anywhere in the state, and the 2% contractor's excise tax falls on the prime contractor's gross receipts.
How local licensing works in South Dakota
How it works in South Dakota. No South Dakota agency issues a general, commercial, building or unlimited contractor license, and there is no state qualifying party, business-and-law examination or financial responsibility test. Commercial construction is controlled through the building permit and the plan review, and by the state's requirement that commercial projects be designed and overseen by licensed architects and engineers. The one thing the state does require of every commercial contractor is a contractor's excise tax license from the Department of Revenue: 'an individual must be licensed before starting work in South Dakota. All contractors must be licensed regardless of the amount of the receipts they have or the amount of tax due.' It is free, it is applied for online, and the 2% contractor's excise tax is imposed on the gross receipts of the prime contractor. Get it first; cities ask for the card.
Rapid City. This is the one city of the four that licenses commercial builders, and its Class A license is the most demanding contractor credential in South Dakota. Class A is the 'General Contractor' class, 'for construction of any and All types of structures', and it is issued on the ICC National Standard General Building Contractor (A) examination, known as the G11, taken through Pearson VUE: 4.5 hours, 90 multiple-choice questions, open book, based on the 2018 International Building Code and the 2018 International Residential Code, with an examination fee of $115.00 and testing at the Career Learning Center, 730 E Watertown St. The license itself is $200 initially and $100 to renew, runs three years and carries six hours of continuing education per period. Every applicant files a certificate of insurance naming the City of Rapid City as certificate holder, and no other form is accepted, with minimum general aggregate liability of $1,000,000, $300,000 fire damage and $1,000,000 each occurrence, plus a workers' compensation certificate or a signed statement of non-participation. A copy of the South Dakota excise tax certificate is part of the packet, and an electrical contractor class separately requires proof of a South Dakota electrical contractor's license. No verifiable experience is required for Class A, and the packet offers no waiver, credit or reciprocity for a contractor license held in another city or another state: a licensee who lets the license lapse beyond the one-year grace period must reapply and pass the examination again. Building Services is on (605) 394-4120.
Sioux Falls. The city's position is one sentence long: 'The City of Sioux Falls does not require Commercial Building Contractors to be licensed at this time.' What it requires instead is that each individual project goes through plan review and obtains the proper permits. Note that apartment buildings count as commercial for construction purposes even though they are residential in use, so a multifamily builder falls outside the residential license as well. The electrical, mechanical, plumbing, refrigeration, sign and right-of-way trades are separately licensed by the city, and right-of-way contractors must be bonded and insured before working in a city right-of-way. Plans examiners are on 605-367-8248 and building inspectors on 605-367-8251.
Aberdeen. 'Because the majority of commercial construction projects are required to be designed and overseen by design professionals (i.e. Professional Architects and Professional Engineers), Commercial Contractors are not required to be licensed through the City of Aberdeen. Commercial Contractors are required to obtain a South Dakota Excise Tax License.' Electricians are licensed by the state, with state permits and state inspections in Aberdeen; plumbers are licensed by the state but permitted and inspected by city inspectors. Building Inspection is at City Hall, 123 South Lincoln Street, 3rd Floor, 605-626-7017.
Brookings. Community Development issues a residential contractor license, a plumber license, building permits and rental licenses, and publishes no commercial or general building contractor license; all work must conform to the International Building Code and electrical and plumbing work must be done by trades licensed by the state and the city. Because the city publishes no commercial contractor application, confirm what is expected of a commercial builder with Community Development on (605) 692-6629 before bidding. Building permits also apply on nonagricultural land in the joint jurisdictional area about three miles beyond the city.
Everywhere else. Other South Dakota cities set their own permit and licensing rules, and the further from the larger cities you go the more likely it is that a permit and proof of insurance are all that is asked. Check with each building official, and hold the state excise tax license wherever you work.
- Rapid City (Building Services Division - Class A General Contractor license and ICC G11 examination)
- Sioux Falls (Building Services - no license required for commercial building contractors)
- Aberdeen (Building Inspection - commercial contractors not licensed by the city; excise tax license required)
- Brookings (Community Development - residential contractor license only; no commercial contractor license published)
Common questions
- Do I have to take the Alaska general contractor exam if I'm licensed in South Dakota?
- No. The trade exam is waived on this path.
- What does it cost to get a Alaska general contractor license from South Dakota?
- Published fees on this path total $350, not counting exam vendor fees or bonds.
- Do my South Dakota work hours count in Alaska?
- No. Alaska does not credit out-of-state hours on this path.
- Does it work the other way, from Alaska to South Dakota?
- Not necessarily. Reciprocity is directed. Going from Alaska to South Dakota, the mechanism is not applicable.
Sources
- Construction Contractor Professional Licensing - Bond and Insurance Quick Facts · Alaska Department of Commerce, Community, and Economic Development (CBPL) · Other · verified September 17, 2026
- Construction Contractors - Alaska Division of Corporations, Business and Professional Licensing · Alaska Department of Commerce, Community, and Economic Development (CBPL) · Agency Page · verified September 17, 2026
- Construction Contractors FAQs - Alaska Division of Corporations, Business and Professional Licensing · Alaska Department of Commerce, Community, and Economic Development (CBPL) · Faq · verified September 17, 2026
- Applications and Forms - Alaska Construction Contractors Program · Alaska Department of Commerce, Community, and Economic Development (CBPL) · Agency Page · verified September 17, 2026
- Statutes and Regulations - Construction Contractors (AS 08.18 and 12 AAC 21), September 2023 · AS 08.18.011, .013, .021, .024, .025, .031, .041, .051, .071, .101; 12 AAC 21.650, .660, .680, .690, .695, .700 · Alaska Department of Commerce, Community, and Economic Development (CBPL) · Admin Rule · verified September 17, 2026
- Form 08-4815 - General Contractor Registration Application (rev. 09/03/2025) · Alaska Department of Commerce, Community, and Economic Development (CBPL) · Form · verified September 17, 2026
- License Expiration Dates - Alaska Division of Corporations, Business and Professional Licensing · Alaska Department of Commerce, Community, and Economic Development (CBPL) · Agency Page · verified September 17, 2026
- National Organizations - Alaska Construction Contractors Program · Alaska Department of Commerce, Community, and Economic Development (CBPL) · Agency Page · verified September 17, 2026
- Form 08-4818 - Specialty Contractor Registration Application (rev. 09/03/2025) · Alaska Department of Commerce, Community, and Economic Development (CBPL) · Form · verified September 17, 2026
- NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.