LicensebyState

South Dakota to Alaska: residential contractor license reciprocity

No credit· Start overVerified September 17, 2026· 12 sources

South Dakota does not issue a statewide residential contractor license, so there is nothing to transfer. Here is Alaska's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

Registration and residential endorsement earned from scratch (every state)

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

A builder arriving in Alaska with a contractor license from another state gets no credit for it. Alaska's contractor law, AS 08.18 and 12 AAC 21, contains no reciprocity provision, no endorsement of out-of-state credentials and no examination waiver, the division publishes no verification-of-licensure form, and Alaska is not one of the states that accepts the NASCLA Accredited Examination in place of its own. Every applicant follows the same two steps: the business registers as a General Contractor with Residential Endorsement with its bond, insurance and fees, and the person who will hold the endorsement completes the 16-hour cold climate course and passes the Alaska residential contractor endorsement examination through PSI. That examination is open-reference, 100 questions in 240 minutes with 70 percent to pass, and it is built around arctic structural and thermal construction, so it tests material that a license from a warmer state will not have covered. The division does not require board approval to sit the examination and does not publish a processing time; it says an application generally takes several weeks once the complete packet is in.

12 AAC 21.680(3) accepts a passing score on the PSI residential contractor endorsement examination 'or other examination approved by the department', and AS 08.18.025(b)(4) accepts the Alaska craftsman home program 'or its equivalent' or a postsecondary course in arctic engineering 'or its equivalent'. Neither the division's website nor its forms name any other approved examination or any specific equivalent course beyond the three providers listed on Form 08-4161, so an applicant holding an out-of-state residential builder credential or a cold-climate building course from elsewhere should write to [email protected] or call (907) 465-2050 and ask whether it will be accepted before paying PSI. Alaska sets no minimum trade experience or apprenticeship hours for a contractor registration at any tier, so documented out-of-state years shorten nothing.

At a glance

Trade exam
Required
Law / code exam
Not required
Out-of-state hours
Do not count

What you must already have

  • Your qualifying exam must have been passed within the last 1 year.AS 08.18.025(b)(3) and 12 AAC 21.680(3). PSI also states that examination results are valid for one year. If the endorsement later lapses for more than two years the examination must be passed again, and after five years a completely new application is required (12 AAC 21.695).
  • You must have no disciplinary action or unresolved complaints on your record.
  • The endorsement is held by a person and assigned to a registered general contractor. The holder must be the sole proprietor, one of the partners, an employee, authorized board member or officer of the corporation, or an employee or authorized member of the LLC, and may be assigned to no more than two general contractors.12 AAC 21.690. If the general contractor the endorsement is assigned to fails to renew or is deactivated, the division reissues the endorsement as unassigned and the holder may reassign it to another registered general contractor on the division's assignment form (#08-4465).
  • Alaska sets no minimum trade experience, apprenticeship or supervisory hours for a contractor registration or for the residential contractor endorsement. Nothing in the application asks how long the applicant has worked in construction.

What you'll do to get licensed in Alaska

  1. 1Trade exam. Pass the destination's trade exam. Alaska Residential Contractor Endorsement Examination, administered by PSI Services LLC: 100 questions, 240 minutes, 70 percent to pass. It is open reference, so code books and the Alaska Centralized Regulations may be brought into the test center along with a silent nonprinting calculator. Content runs from sitework, foundations, concrete, masonry, plan reading and carpentry to advanced cold climate home building techniques, American Wood Council framing fundamentals, seismic and wind loading, OSHA safety and the Alaska regulations for the residential endorsement. Division approval is not needed to sit it; the candidate registers with PSI directly and files the passing result with the endorsement application..
  2. 2Other. Proof of satisfactory completion, within the two years before the endorsement application, of the Alaska craftsman home program or its equivalent, or a postsecondary course in arctic engineering or its equivalent. The program page describes this as a 16-hour cold climate course. Form 08-4161 lists the providers the division has on record: At Your Pace Online LLC, Alaska Craftsman Home Program Inc and Wisdom and Associates Inc..
  3. 3Exam fee. Pay the exam fee ($150). $150 examination fee paid to PSI Services LLC when the examination is booked. It is nonrefundable and nontransferable and stays valid for one year from the date of payment. An examination review, if requested after a failure, costs a further $150 and lasts one hour. The figure comes from the candidate bulletin the division publishes, which is the 2017 edition, so confirm the current amount with PSI on (800) 733-9267 before paying..
  4. 4Application fee. Pay the application fee ($100). $100 nonrefundable application fee. It is charged twice on this route: once on the General Contractor with Residential Endorsement registration application (#08-4819) and once on the Contractor Residential Endorsement application (#08-4161), because the registration and the endorsement are separate filings. The fee is never refunded, including where an application is abandoned after 12 months without correspondence..
  5. 5License fee. Pay the license or certificate fee ($250). $250 registration fee, also charged separately on the registration and on the endorsement, making $350 due with each of the two applications. Construction contractor registrations and residential endorsements run on a two-year cycle and expire on September 30 of even-numbered years whatever date they were issued, except that one issued within 90 days of an expiration date runs to the next cycle..
  6. 6Surety bond. Post a surety bond ($20,000). $20,000 surety bond for a general contractor with a residential contractor endorsement who performs exclusively residential work; a general contractor who also takes commercial work posts $25,000. The bond runs to the State, covers taxes, labor and material claims and judgments for negligent or improper work, and must remain in effect for three years until canceled by the surety, the principal or the department. A cashier's check cash deposit, a time certificate of deposit or a savings passbook held in trust for the State may be filed instead, using the division's Assignment of Cash Deposit form. The bond document must reach the division within 30 days of issuance and must carry the business name exactly as it appears on the application, including any DBA..
  7. 7Insurance. Carry the required insurance. Public liability and property damage insurance covering Alaska contracting operations, with limits of at least $20,000 for damage to property, $50,000 for injury including death to any one person and $100,000 for injury including death to more than one person (AS 08.18.101). Workers' compensation coverage from a carrier admitted in Alaska, or a self-insurance certificate, is also required if the business uses employee labor or is a corporation or LLC. Like the bond, the certificate must reach the division within 30 days of issuance with the business name written exactly as on the application..
  8. 8Business license. Obtain a business license. A corporation, LLC or other registered entity must be on file with the division's Corporations Section, with its Alaska entity number on the application, before the contractor application is processed. A State of Alaska business license under AS 43.70 is obtained after the professional registration is issued; the registration does not take its place, and the DBA name on the two must match. All advertising, contracts and signage must then carry the contractor's registered name, registration number, mailing address and physical address, or direct customers to a website that carries them (AS 08.18.051)..
  9. 9Continuing education. Complete continuing education. A renewal condition rather than an entry requirement: a residential contractor endorsement holder documents 16 contact hours of approved continuing competency activity each licensing period. At a first renewal it is eight hours for each complete calendar year the endorsement was held, and nothing at all if it was held for less than a full calendar year. No more than eight hours may come from business topics such as management, marketing, finance, safety, CPR and first aid; up to 16 may come from technical topics such as construction codes, materials and energy, remodeling and construction techniques. The division audits a share of renewals, so certificates should be kept..
  10. 10Other. With the endorsement application: a notarized signature, an Authorization for Release of Records form (#08-4161a), the name and registration number of the licensed general contractor the endorsement will be assigned to, and a copy of the official PSI examination result. A United States Social Security number must be on file before any professional license is issued, or a signed exemption request form in its place..

Published fees on this path total $500, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Trade exam
  • Exam fee · $150

Continuing education

Renewals usually need approved CE hours, often on the latest NEC. Reciprocal licensees are rarely exempt.

  • Other
  • Continuing education

Surety bond

A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.

  • Surety bond · $20,000

Liability insurance

Some states require proof of general liability or workers' compensation coverage at licensing time.

  • Insurance

Business registration

If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.

  • Business license

How Alaska licenses residential contractors

Alaska residential contractor · “General Contractor with Residential Contractor Endorsement

Statewide license

Verified September 17, 2026· 6 sources

Issued by Alaska Division of Corporations, Business and Professional Licensing (Construction Contractors Program)

Alaska licenses homebuilders statewide through the Construction Contractors Program in the Division of Corporations, Business and Professional Licensing, part of the Department of Commerce, Community, and Economic Development. The credential comes in two pieces. The registration is held by the business: an individual, partnership, corporation or LLC registers as a General Contractor with Residential Endorsement, posts a $20,000 surety bond, files public liability and property damage insurance, and pays a $100 application fee and a $250 registration fee. The residential contractor endorsement itself is held by a person and assigned to that registered general contractor, and it is what unlocks residential work: no general contractor may build or bid a privately owned residential structure of one to four units, or alter one by more than 25 percent of its value, unless the contractor holds the endorsement or has an endorsement holder assigned to it. To earn the endorsement an individual completes a 16-hour cold climate course and passes the Alaska residential contractor endorsement examination on arctic structural and thermal construction. The endorsement holder must be the sole proprietor, a partner, an employee, director or officer of the corporation, or an employee or member of the LLC, and may be assigned to no more than two general contractors at a time.

Moving to AlaskaLeaving Alaska

Why South Dakota has nothing to transfer

South Dakota residential contractor

Licensed by cities and counties

Verified September 17, 2026· 11 sources

South Dakota issues no state residential contractor, home builder or remodeler license, and no state board examines or qualifies people who build houses. The Department of Labor and Regulation's list of occupational licensing agencies contains an Electrical Commission, a Plumbing Commission and a Board of Technical Professions for architects and engineers, and no contractor board of any kind, so a builder who self-performs electrical or plumbing work needs the matching state license and everything else is local. Cities decide who may build houses inside their limits, and the four largest programs are quite different from one another: Sioux Falls requires a Residential Building Contractor's license with its own written examination, a $20,000 compliance bond and $300,000 of liability insurance; Rapid City issues a Class B residential contractor license on a city examination; Aberdeen licenses residential contractors after an open-book examination and a City Council vote; Brookings issues an annual residential contractor license on insurance and a $75 fee with no examination at all. Separately from any of that, every contractor working anywhere in South Dakota must hold a contractor's excise tax license from the Department of Revenue before starting work, which is free and is a tax registration rather than a test of skill. A builder moving to South Dakota therefore has no state license to transfer and no state reciprocity to apply for: the work is registering for the excise tax license and then qualifying city by city, and only Aberdeen offers any credit for a license held elsewhere.

How local licensing works in South Dakota

How it works in South Dakota. There is no state contractor license, no state application and no state examination, so nothing carries automatically from one South Dakota city to the next, let alone from another state. What every contractor does need before starting work anywhere in the state is a contractor's excise tax license from the Department of Revenue: 'an individual must be licensed before starting work in South Dakota' and 'all contractors must be licensed regardless of the amount of the receipts they have or the amount of tax due.' There is no fee for it, the excise tax itself is 2% of a prime contractor's gross receipts, and three of the four cities below want to see a copy of the license card before they will issue a city license. Get that first, then take each city in turn.

Sioux Falls. Building Services 'requires a Residential Building Contractor's License of all contractors doing work on residential 1- & 2-family dwellings and townhomes within the city limits', and the examples it gives run from sheds, decks, shingles and sheetrock to basement finishing and new construction. The license is held through a named Construction Supervisor, who must first pass the Construction Supervisor Examination: a timed open-book test on the City of Sioux Falls Residential Code Handbook, offered monthly, 50 questions, 'You must get 80% or higher to pass the test, therefore a maximum of 10 of the 50 questions may be incorrect.' The examination fee is $75.00 and the handbook is $10.00. 'Upon application the Construction Supervisor must submit a $20,000 Compliance Bond, a minimum of $300,000 general liability insurance and the appropriate license fees within 90 days of examination.' Licenses run three years, one hour of continuing education is required in each cycle, and a license expired more than twelve months means sitting the examination again unless an inactive license was maintained. On out-of-state credentials the city is blunt: 'No, the city of Sioux Falls does not reciprocate any licenses. You will still need to take and pass examination before applying for the license.' The city does not print the license fee itself on the page, so ask licensing on 605-367-8672 what to send with the bond and the certificate. Sioux Falls also issues a separate Residential Roofing & Repair Contractor license and separate electrical, mechanical, plumbing, fireplace, refrigeration, irrigation, right-of-way and sign licenses.

Rapid City. Building Services licenses a Class B contractor 'for construction of detached single-family houses, attached single family houses and two-family dwellings', on a city-administered open-book examination based on the 2018 International Residential Code and the Rapid City amendments, 54 multiple choice questions in three hours, sat at City Hall. The license costs $200 initially and $100 to renew, runs three years and carries six hours of continuing education per period. Every applicant files a certificate of insurance naming the City of Rapid City as certificate holder and nothing else is accepted, with minimum general aggregate liability of $1,000,000, $300,000 fire damage and $1,000,000 each occurrence, plus a workers' compensation certificate or a signed statement of non-participation for an owner or partnership with no employees. A copy of the state excise tax certificate goes in the packet. Roofing is a separate Class R license, also $200 for three years, on a 12-question examination. A licensee who misses renewal has a one-year grace period, after which the license lapses and the examination must be taken again. Building Services is on (605) 394-4120.

Aberdeen. The city is explicit that location makes no difference to whether you need its license: 'Whether you are based in the City of Aberdeen itself, a different city within South Dakota, or you are based out of a completely different state all together, you must be licensed through the City of Aberdeen.' The examination is 50 questions, open book, two hours, with a passing score of 70%, studied from The Contractors Handbook at $15, and '$35 fee will be charged every time an exam is attempted or passed.' Aberdeen is the one place in the state that gives any weight to a license held elsewhere: 'the examination requirement may be waived if proof of prior licensing from recognized jurisdictions is approved by the City of Aberdeen's Building Official.' No jurisdiction is named on the handout, so bring the license and the licensing authority's own documentation and ask the Building Official first. After passing or being waived, the applicant files a $200 first-time fee covering three years, proof of liability insurance, proof of workers' compensation insurance if applicable, and a copy of the excise tax license, and is then approved by the City Council, which meets Monday evenings; paperwork is due by noon the previous Wednesday and permits may be drawn only after the vote. Renewal is $150 every three years. Building Inspection is at City Hall, 123 South Lincoln Street, 3rd Floor, 605-626-7017.

Brookings. Community Development issues a residential contractor license on paperwork alone. The requirements are the application, a $75 fee, an excise tax number, a copy of workers' compensation insurance and 'a copy of current General Commercial Liability Insurance Certificate stating the sum of not less than $500,000 for each occurrence.' There is no examination and no bond. The license year is the calendar year, January 1 to December 31, and it 'must be renewed in order to continue any current project or prior to starting any new project'; a contractor with a job in progress who lets it expire pays double the fee. The license is neither refundable nor transferable. Building permits are required in the city and on nonagricultural land in the joint jurisdictional area roughly three miles out. Community Development is at 520 3rd Street, Suite 140, (605) 692-6629.

Everywhere else. Smaller South Dakota cities set their own rules and many require only a permit and proof of insurance. Ask the building official in each city you intend to work in, and remember that the excise tax license is required statewide whether or not the city licenses anybody.

Moving to South DakotaLeaving South Dakota

Common questions

Do I have to take the Alaska residential contractor exam if I'm licensed in South Dakota?
Yes. Alaska requires the trade exam on this path.
What does it cost to get a Alaska residential contractor license from South Dakota?
Published fees on this path total $500, not counting exam vendor fees or bonds.
Do my South Dakota work hours count in Alaska?
No. Alaska does not credit out-of-state hours on this path.
Does it work the other way, from Alaska to South Dakota?
Not necessarily. Reciprocity is directed. Going from Alaska to South Dakota, the mechanism is not applicable.

Sources

  1. Construction Contractor Professional Licensing - Bond and Insurance Quick Facts · Alaska Department of Commerce, Community, and Economic Development (CBPL) · Other · verified September 17, 2026
  2. Construction Contractors - Alaska Division of Corporations, Business and Professional Licensing · Alaska Department of Commerce, Community, and Economic Development (CBPL) · Agency Page · verified September 17, 2026
  3. Construction Contractors FAQs - Alaska Division of Corporations, Business and Professional Licensing · Alaska Department of Commerce, Community, and Economic Development (CBPL) · Faq · verified September 17, 2026
  4. Applications and Forms - Alaska Construction Contractors Program · Alaska Department of Commerce, Community, and Economic Development (CBPL) · Agency Page · verified September 17, 2026
  5. Statutes and Regulations - Construction Contractors (AS 08.18 and 12 AAC 21), September 2023 · AS 08.18.011, .013, .021, .024, .025, .031, .041, .051, .071, .101; 12 AAC 21.650, .660, .680, .690, .695, .700 · Alaska Department of Commerce, Community, and Economic Development (CBPL) · Admin Rule · verified September 17, 2026
  6. Form 08-4819 - General Contractor with Residential Endorsement Registration Application (rev. 09/03/2025) · Alaska Department of Commerce, Community, and Economic Development (CBPL) · Form · verified September 17, 2026
  7. License Expiration Dates - Alaska Division of Corporations, Business and Professional Licensing · Alaska Department of Commerce, Community, and Economic Development (CBPL) · Agency Page · verified September 17, 2026
  8. National Organizations - Alaska Construction Contractors Program · Alaska Department of Commerce, Community, and Economic Development (CBPL) · Agency Page · verified September 17, 2026
  9. Alaska Residential Contractor Endorsement Examination - PSI Candidate Information Bulletin · PSI Services LLC for the Alaska Division of Corporations, Business and Professional Licensing · Other · verified September 17, 2026
  10. Form 08-4161 - Contractor Residential Endorsement Application (rev. 04/19/2024) · Alaska Department of Commerce, Community, and Economic Development (CBPL) · Form · verified September 17, 2026
  11. Residential Endorsement Exam Information - Alaska Construction Contractors Program · Alaska Department of Commerce, Community, and Economic Development (CBPL) · Agency Page · verified September 17, 2026
  12. NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related