South Dakota to North Carolina: general contractor license reciprocity
South Dakota does not issue a statewide general contractor license, so there is nothing to transfer. Here is North Carolina's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
NASCLA Accredited Examination in place of the North Carolina Building Contractor examination
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
North Carolina does not recognize an out-of-state general contractor license on its own, but it does accept the NASCLA Accredited Examination for Commercial General Building Contractors in place of its own Building Contractor trade examination. That route is open to anyone regardless of which state licensed them: sit the NASCLA examination before applying, then file the North Carolina application with the NASCLA pass letter and transcript purchase receipt attached and take the North Carolina Business and Law examination. Everything else still applies in full, including the financial responsibility figure for the limitation requested, the background check, character references and entity registration. An applicant who does not hold the NASCLA credential and comes from a state without a waiver agreement simply takes the North Carolina Building Contractor examination instead: 90 questions, 200 minutes, 70% to pass. North Carolina requires no trade experience for licensure, so out-of-state years do not shorten any step.
The Board confirms NASCLA acceptance on its own contractor FAQ and in 21 NCAC 12A .0303(c), which names the NASCLA examination alongside an origin state examination as the qualifying exam. The FAQ states acceptance for the Building classification; it does not say the NASCLA examination is accepted for the Residential classification. The NASCLA examination is bought and scheduled from NASCLA, not from the Board or PSI, and it is taken before the North Carolina application is filed. Without NASCLA and without a waiver agreement, substitute the North Carolina Building Contractor examination for the waived trade examination below; the Business and Law examination is then part of that classification examination rather than a separate sitting.
At a glance
- Trade exam
- Waived
- Law / code exam
- Required
- Out-of-state hours
- Do not count
What you must already have
- You must have passed a licensing exam in South Dakota that the destination considers comparable.NASCLA Accredited Examination for Commercial General Building Contractors, passed before the North Carolina application is filed. The Board asks for the NASCLA pass letter and the transcript purchase receipt to be attached to the application.
- The qualifier is at least 18 years old and possesses good moral character as determined by the Board (G.S. 87-10). North Carolina sets no minimum trade experience or apprenticeship hours for a general contractor license.
What you'll do to get licensed in North Carolina
- 1Law / code exam. Pass a law, rules, or code exam. North Carolina Business and Law examination: 40 questions, 90 minutes, 70% to pass, covering erosion and sedimentation control, licensing, liens, contracts, project management, safety and business practices. Required of applicants who qualify on the NASCLA examination rather than the North Carolina Building Contractor examination..
- 2Trade exam. Pass the destination's trade exam (if applicable). Not required if the NASCLA Accredited Examination has been passed. Otherwise the North Carolina Building Contractor examination applies: 90 questions, 200 minutes, 70% to pass, open book, administered by PSI Services LLC after the Board issues an eligibility letter..
- 3Application fee. Pay the application fee ($75). Nonrefundable application fee set by the limitation requested: $75 for a limited license, $100 for an intermediate license and $125 for an unlimited license (G.S. 87-10(a1); 21 NCAC 12A .0304(a)). The amount shown is the limited-license fee..
- 4Exam fee. Pay the exam fee ($79). $79 per examination, paid to PSI Services LLC when the examination is scheduled. The NASCLA examination itself is bought from NASCLA and is not covered by this fee..
- 5Financial responsibility. Show financial responsibility of at least $17,000. Evidence of financial responsibility for the entity that will hold the license. Current assets must exceed current liabilities by at least $17,000 for a limited license (or total net worth of at least $80,000), $75,000 for an intermediate license, or $150,000 for an unlimited license. Intermediate and unlimited applicants must show the figure in an agreed-upon procedures report on the Board form or an audited financial statement prepared by a CPA or independent accountant. Statements must be no more than twelve months old and conform to GAAP (21 NCAC 12A .0204). The amount shown is the limited-license working capital figure..
- 6Surety bond. Post a surety bond ($175,000) (if applicable). Optional alternative to the working capital or net worth figure: a continuous surety bond of $175,000 for a limited license, $500,000 for an intermediate license or $1,000,000 for an unlimited license, from a surety authorized in North Carolina and rated Superior or Excellent by A.M. Best. Proof is filed with the application and with every annual renewal, and the bond must stay in force until the licensee can show the required working capital (21 NCAC 12A .0204(e))..
- 7Background check. Complete a background check. Criminal background check through the third-party vendor the Board names, paid directly to the vendor. Every qualifier submits to the check, along with the sole proprietor, the president of a corporation, all managers and members of an LLC, or all partners of a partnership (21 NCAC 12A .0303(b))..
- 8Business license. Obtain a business license. The license is issued to a legal entity, so the individual, corporation, LLC or partnership that will contract must be formed and, if organized outside North Carolina, authorized to transact business in the State before the license is issued (G.S. 87-10.1)..
- 9Insurance. Carry the required insurance (if applicable). The Board states there is no insurance or bonding requirement for a general contractor license itself. North Carolina workers compensation law still applies to the business independently of licensure, and owners, lenders and general contractors commonly require general liability coverage by contract..
- 10Continuing education. Complete continuing education. Renewal condition rather than an entry requirement: at least one qualifier on a building, residential or unclassified license must complete eight hours of Board-approved continuing education each year, made up of a two-hour mandatory course and six elective hours, with up to four elective hours carried forward (G.S. 87-10.2)..
- 11Other. Letters of character reference required by 21 NCAC 12A .0303(a)(9) and .0308, certified copies of court records for any criminal convictions of the applicant or its qualifiers, and disclosure of disciplinary history with this or any other licensing agency..
Published fees on this path total $154, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Law / code exam
- Trade exam · if applicable
- Exam fee · $79
Surety bond
A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.
- Surety bond · $175,000 · if applicable
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Business license
Liability insurance
Some states require proof of general liability or workers' compensation coverage at licensing time.
- Insurance · if applicable
Continuing education
Renewals usually need approved CE hours, often on the latest NEC. Reciprocal licensees are rarely exempt.
- Continuing education
How North Carolina licenses general contractors
North Carolina general contractor · “General Contractor, Building classification (Limited, Intermediate or Unlimited)”
Statewide license
Issued by North Carolina Licensing Board for General Contractors
The unlimited tier in North Carolina is the Building classification of the General Contractor license, issued by the North Carolina Licensing Board for General Contractors and required for any single undertaking costing $40,000 or more. The Building classification covers all building construction and demolition, commercial, industrial, institutional and residential alike, plus parking decks, site work and paving, storm drainage, retaining walls, recreational facilities and a list of specialty categories including concrete, masonry, roofing, metal erection, interior construction, swimming pools and asbestos. The Board also issues Highway, Public Utilities and Specialty classifications for work outside building construction, and separate North Carolina boards license the electrical, plumbing, heating and fire sprinkler trades. As with every classification, the license is held by a business and qualified by a named individual who passes the examination, and it carries a monetary limitation: Limited up to $750,000 per project, Intermediate up to $1,500,000, and Unlimited with no project cap, each set by the working capital, net worth or surety bond the applicant can show. North Carolina accepts the NASCLA Accredited Examination for this classification, and it holds examination waiver agreements with a short list of named states, but the Board states it does not have full reciprocity with any state.
Why South Dakota has nothing to transfer
South Dakota general contractor
Licensed by cities and counties
South Dakota has no state general, commercial or building contractor license and no state board that examines or qualifies builders, so there is nothing at state level for an out-of-state general contractor's license to transfer into. The Department of Labor and Regulation's occupational licensing list has an Electrical Commission, a Plumbing Commission and a Board of Technical Professions for architects and engineers, and no contractor board, so the credentials that matter at state level are the electrical and plumbing licenses held by the subcontractors and the design professionals who stamp the drawings. Commercial building is governed locally, and most of the state's larger cities license less at this level than at the residential one: Sioux Falls states that it 'does not require Commercial Building Contractors to be licensed at this time', Aberdeen says commercial contractors are not required to be licensed through the city because commercial projects are designed and overseen by architects and engineers, and Brookings publishes a residential contractor license and no commercial equivalent. Rapid City is the exception, licensing a Class A general contractor for construction of all types of structures on the ICC National Standard General Building Contractor (A) examination. Every contractor, commercial included, must hold a free contractor's excise tax license from the Department of Revenue before starting work anywhere in the state, and the 2% contractor's excise tax falls on the prime contractor's gross receipts.
How local licensing works in South Dakota
How it works in South Dakota. No South Dakota agency issues a general, commercial, building or unlimited contractor license, and there is no state qualifying party, business-and-law examination or financial responsibility test. Commercial construction is controlled through the building permit and the plan review, and by the state's requirement that commercial projects be designed and overseen by licensed architects and engineers. The one thing the state does require of every commercial contractor is a contractor's excise tax license from the Department of Revenue: 'an individual must be licensed before starting work in South Dakota. All contractors must be licensed regardless of the amount of the receipts they have or the amount of tax due.' It is free, it is applied for online, and the 2% contractor's excise tax is imposed on the gross receipts of the prime contractor. Get it first; cities ask for the card.
Rapid City. This is the one city of the four that licenses commercial builders, and its Class A license is the most demanding contractor credential in South Dakota. Class A is the 'General Contractor' class, 'for construction of any and All types of structures', and it is issued on the ICC National Standard General Building Contractor (A) examination, known as the G11, taken through Pearson VUE: 4.5 hours, 90 multiple-choice questions, open book, based on the 2018 International Building Code and the 2018 International Residential Code, with an examination fee of $115.00 and testing at the Career Learning Center, 730 E Watertown St. The license itself is $200 initially and $100 to renew, runs three years and carries six hours of continuing education per period. Every applicant files a certificate of insurance naming the City of Rapid City as certificate holder, and no other form is accepted, with minimum general aggregate liability of $1,000,000, $300,000 fire damage and $1,000,000 each occurrence, plus a workers' compensation certificate or a signed statement of non-participation. A copy of the South Dakota excise tax certificate is part of the packet, and an electrical contractor class separately requires proof of a South Dakota electrical contractor's license. No verifiable experience is required for Class A, and the packet offers no waiver, credit or reciprocity for a contractor license held in another city or another state: a licensee who lets the license lapse beyond the one-year grace period must reapply and pass the examination again. Building Services is on (605) 394-4120.
Sioux Falls. The city's position is one sentence long: 'The City of Sioux Falls does not require Commercial Building Contractors to be licensed at this time.' What it requires instead is that each individual project goes through plan review and obtains the proper permits. Note that apartment buildings count as commercial for construction purposes even though they are residential in use, so a multifamily builder falls outside the residential license as well. The electrical, mechanical, plumbing, refrigeration, sign and right-of-way trades are separately licensed by the city, and right-of-way contractors must be bonded and insured before working in a city right-of-way. Plans examiners are on 605-367-8248 and building inspectors on 605-367-8251.
Aberdeen. 'Because the majority of commercial construction projects are required to be designed and overseen by design professionals (i.e. Professional Architects and Professional Engineers), Commercial Contractors are not required to be licensed through the City of Aberdeen. Commercial Contractors are required to obtain a South Dakota Excise Tax License.' Electricians are licensed by the state, with state permits and state inspections in Aberdeen; plumbers are licensed by the state but permitted and inspected by city inspectors. Building Inspection is at City Hall, 123 South Lincoln Street, 3rd Floor, 605-626-7017.
Brookings. Community Development issues a residential contractor license, a plumber license, building permits and rental licenses, and publishes no commercial or general building contractor license; all work must conform to the International Building Code and electrical and plumbing work must be done by trades licensed by the state and the city. Because the city publishes no commercial contractor application, confirm what is expected of a commercial builder with Community Development on (605) 692-6629 before bidding. Building permits also apply on nonagricultural land in the joint jurisdictional area about three miles beyond the city.
Everywhere else. Other South Dakota cities set their own permit and licensing rules, and the further from the larger cities you go the more likely it is that a permit and proof of insurance are all that is asked. Check with each building official, and hold the state excise tax license wherever you work.
- Rapid City (Building Services Division - Class A General Contractor license and ICC G11 examination)
- Sioux Falls (Building Services - no license required for commercial building contractors)
- Aberdeen (Building Inspection - commercial contractors not licensed by the city; excise tax license required)
- Brookings (Community Development - residential contractor license only; no commercial contractor license published)
Common questions
- Do I have to take the North Carolina general contractor exam if I'm licensed in South Dakota?
- The trade exam is waived, but North Carolina requires a law or code exam.
- What does it cost to get a North Carolina general contractor license from South Dakota?
- Published fees on this path total $154, not counting exam vendor fees or bonds.
- Do my South Dakota work hours count in North Carolina?
- No. North Carolina does not credit out-of-state hours on this path.
- Does it work the other way, from North Carolina to South Dakota?
- Not necessarily. Reciprocity is directed. Going from North Carolina to South Dakota, the mechanism is not applicable.
Sources
- NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
- N.C.G.S. 87-10 - Application for license; examination; certificate; renewal · N.C.G.S. 87-10(a), (a1), (b), (c), (c1), (e) · North Carolina General Assembly · Statute · verified September 17, 2026
- N.C.G.S. 87-15.1 - Reciprocity of licensing · N.C.G.S. 87-15.1 · North Carolina General Assembly · Statute · verified September 17, 2026
- Classifications and limitations - NC Licensing Board for General Contractors · North Carolina Licensing Board for General Contractors · Agency Page · verified September 17, 2026
- FAQ for Contractors - NC Licensing Board for General Contractors · North Carolina Licensing Board for General Contractors · Faq · verified September 17, 2026
- Laws and Regulations Applicable to General Contracting in the State of North Carolina (2026 edition) · 21 NCAC 12A .0202, .0204, .0303, .0304, .0402, .0403, .0404 · North Carolina Licensing Board for General Contractors · Admin Rule · verified September 17, 2026
- License applicants - NC Licensing Board for General Contractors · North Carolina Licensing Board for General Contractors · Agency Page · verified September 17, 2026
- Licensure Application Questions - License Type Selector (online application preview) · North Carolina Licensing Board for General Contractors · Form · verified September 17, 2026
- State of North Carolina Licensing Board for General Contractors - Candidate Information Bulletin · PSI Services LLC for the North Carolina Licensing Board for General Contractors · Other · verified September 17, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.