LicensebyState

Illinois to South Carolina: residential contractor license reciprocity

No credit· Start overVerified September 17, 2026· 5 sources

Illinois does not issue a statewide residential contractor license, so there is nothing to transfer. Here is South Carolina's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

Residential Builder license by exam waiver or by examination (states without a named agreement)

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

A residential builder arriving from a state that is not on the Commission’s four-state list still has a waiver route: the Commission waives the Residential Builder technical portion of the examination for anyone who passed the NASCLA Accredited Examination for Commercial General Building Contractors within the past three years, and a copy of the exam transcript goes in with the application. The Business Management and Law portion of the examination and the work experience requirement are not waived on any route. Without the NASCLA credential the applicant sits both portions of the South Carolina Residential Builder examination through PSI, with eligibility good for one year and three attempts in a twelve-month period. Either way the Commission first reviews and approves the work experience, so file the $135 application with the experience affidavits, W-2s or 1099s, the credit report and the $15,000 bond, then pay the $220 license fee once approved. A license obtained on a technical exam waiver is a limited "Residential Builder Exam Waiver" license: mechanical trades work must be subcontracted to an appropriately licensed person or company, and to do that work yourself you must apply by examination instead.

A currently licensed South Carolina General Contractor with the Building (BD) or Limited Building (LB) classification, in good standing and active for a year or longer and obtained by examination, is the third waiver route; Commission staff verify that internally. S.C. Code Section 40-59-220(F) is written more broadly than the Commission’s published routes - it allows a license without examination for applicants licensed in good standing in other states the commission determines to have comparable examinations - but the published routes are the four named states, the South Carolina BD or LB license and the NASCLA exam. The Commission publishes no processing time; an application stays open one year from receipt. Ask at [email protected] or (803) 896-4696.

At a glance

Trade exam
Waived
Law / code exam
Required
Out-of-state hours
Count toward eligibility

What you must already have

  • You must have passed a licensing exam in Illinois that the destination considers comparable.The Commission’s own Residential Builder page and its application instructions both say the technical portion may be waived where the applicant "has passed the NASCLA Commercial General Building Contractor exam within the past 3 years", with a copy of the exam transcript submitted with the application. The NASCLA exam is an examination credential, not a license and not an agreement between two states: anyone may sit it in any participating jurisdiction. It does not waive the Business Management and Law portion, the experience requirement, the bond, the credit report or any fee.
  • Your qualifying exam must have been passed within the last 3 years.
  • At least one year of actual residential building experience performed within the past five years, under the supervision of a licensed residential builder or another appropriately licensed professional engaged in residential building construction. Experience earned outside South Carolina counts.Documented with copies of W-2s or 1099s from each employer and a Residential Builder Experience Affidavit completed by each supervisor or employer listed on the application; the details on the affidavits must match the application. S.C. Code Section 40-59-220(B) also lets the Commission accept other education or experience, or a combination, and the Commission invites a written explanation with supporting documents where the standard paperwork cannot be produced. The work experience requirement applies on the exam-waiver routes as well as on the examination route.

What you'll do to get licensed in South Carolina

  1. 1Trade exam. Pass the destination's trade exam (if applicable). Residential Builder technical portion of the South Carolina examination, administered by PSI at https://test-takers.psiexams.com/scrb/. It is required unless the applicant qualifies for a technical exam waiver through the NASCLA Commercial General Building Contractor exam passed within the past three years, a current examined license held a year or more in Alabama, Georgia, Mississippi or North Carolina, or a current South Carolina General Contractor license in the Building (BD) or Limited Building (LB) classification..
  2. 2Law / code exam. Pass a law, rules, or code exam. Business Management and Law portion of the South Carolina Residential Builder examination, administered by PSI at https://test-takers.psiexams.com/scrb/. It is required on every route, including both exam-waiver routes. Examination eligibility lasts one year and allows three attempts in a twelve-month period; after three failures the applicant waits twelve months (S.C. Code Section 40-59-220(E))..
  3. 3Exam fee. Pay the exam fee. Examination fees are paid directly to PSI. The Commission does not publish the amounts; they are in PSI’s South Carolina Residential Builder candidate information at https://test-takers.psiexams.com/scrb/, or ask the Commission at [email protected] or (803) 896-4696..
  4. 4Application fee. Pay the application fee ($135). Non-refundable $135 application fee, by check or money order payable to SCRBC, or paid online through the Commission’s electronic application. A returned-check fee of up to $30 may be charged. The application stays open for one year from the date it is received; if everything is not in by then the process starts over..
  5. 5License fee. Pay the license or certificate fee ($220). Residential Builder (RBB) license fee of $220, paid once the Commission approves the application. Renewal is $220, the renewal late fee is $50 and reinstatement of a lapsed license is $480..
  6. 6Surety bond. Post a surety bond ($15,000). Surety bond of at least $15,000 on the Commission’s approved form, required by S.C. Code Section 40-59-220(C). The individual’s name must be listed as principal; the bond cannot be in a company or business name. The original must carry the surety’s signature, the principal’s signature, a visible surety company seal and the attached power of attorney. DocuSign signatures and handwritten bonds are not accepted. The Commission publishes a list of surety companies authorized in South Carolina as a starting point..
  7. 7Financial responsibility. Show financial responsibility. A complete credit report from TransUnion, Equifax or Experian dated no more than 30 days before the application date, required by S.C. Code Section 40-59-250 and reviewed for liens and outstanding judgments. The application also asks you to list any outstanding judgments against you or entities you were associated with in the past five years. The Commission does not publish a minimum score, net worth or working capital figure for a Residential Builder license; ask at [email protected] or (803) 896-4696..
  8. 8Business license. Obtain a business license. Company details are only needed if you will trade under a company name. You must own at least 51 percent of the company to list it on your license; if you own less, the company applies separately for a residential business Certificate of Authorization. A South Carolina company attaches a Certificate of Existence (or Good Standing) from the SC Secretary of State and a company formed elsewhere attaches a Certificate of Authority, together with the articles of incorporation or organization and proof of ownership percentages..
  9. 9Other. Application paperwork: a copy of your driver’s license, state-issued ID, passport or military ID, a copy of your Social Security card, a notarized Verification of Lawful Presence form, legal name-change documents if applicable, and an explanatory statement with supporting documents for any "yes" answer on the disclosure questions..
  10. 10Other. Proof of the NASCLA Commercial General Building Contractor exam (a copy of your transcript) if you are using that waiver, plus a Verification of Licensure sent directly to the Commission by each state where you hold or have held a residential builder license or a license in a building-related profession..

Published fees on this path total $355, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Trade exam · if applicable
  • Law / code exam
  • Exam fee

Surety bond

A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.

  • Surety bond · $15,000

Business registration

If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.

  • Business license

How South Carolina licenses residential contractors

South Carolina residential contractor · “Residential Builder License (RBB); limited "Residential Builder Exam Waiver" license on the waiver routes

Statewide license

Verified September 17, 2026· 4 sources

Issued by South Carolina Residential Builders Commission (SC LLR)

South Carolina licenses residential builders statewide through the Residential Builders Commission, a separate body from the Contractor’s Licensing Board that handles commercial work. A residential builder is anyone who constructs or superintends the construction, repair or improvement of a residential building not over three floors high and with no more than sixteen units in any single apartment building, where the undertaking costs more than $5,000. Unlike the commercial license, this one is held by the person: the $15,000 surety bond must name the individual as principal and cannot be in a company name, and you may only put a company on your license if you own at least 51 percent of it, otherwise the company applies for its own residential business Certificate of Authorization. Entry needs one year of residential building experience within the past five years, a credit report, the bond and both parts of the PSI examination. The technical part can be waived three ways: a current South Carolina General Contractor license in the Building (BD) or Limited Building (LB) classification, a current examined license held a year or more in Alabama, Georgia, Mississippi or North Carolina, or the NASCLA Commercial General Building Contractor exam passed within the past three years. A license issued on any of those waiver routes is a limited one that does not allow the holder to perform the mechanical trades.

Moving to South CarolinaLeaving South Carolina

Why Illinois has nothing to transfer

Illinois residential contractor · “No statewide license; local titles include Chicago General Contractor Class D or E and Chicago Home Repair

Licensed by cities and counties

Verified September 17, 2026· 19 sources

Illinois issues no statewide residential contractor, home builder or remodeler license, and no state agency examines or qualifies people who build or remodel houses. What the State does license is narrower and worth knowing: the Department of Financial and Professional Regulation licenses roofing contractors under the Illinois Roofing Industry Licensing Act, where a limited license covers residential properties of eight units or less and an unlimited license covers residential, commercial and industrial roofs, and a municipality or county may not issue a building permit to a roofing contractor without proof of that state license. IDFPR also licenses architects, professional and structural engineers, land surveyors and alarm contractors, and the Department of Public Health licenses plumbers, plumbing contractors and irrigation contractors, but nowhere on IDFPR's list of regulated professions is there a general, residential or building contractor. Everything else is local: Illinois municipalities are home rule units and license or register residential contractors one jurisdiction at a time, with the City of Chicago's General Contractor license by far the most consequential. A builder moving to Illinois therefore has no state license to transfer and no reciprocity to apply for; the practical work is registering in each city or county where they will pull permits, carrying the insurance each one demands, and obtaining the state roofing license if the company will do roofing. Statewide consumer law still applies: the Home Repair and Remodeling Act requires a written contract for any home repair or remodeling job over $1,000 and the "Home Repair: Know Your Consumer Rights" pamphlet on every job.

How local licensing works in Illinois

How it works in Illinois. There is no state license, no state application and no state exam for residential contractors. Each municipality decides who may pull a residential building permit, so a contractor must be licensed or registered separately in every jurisdiction where they build, and a credential from one Illinois city is not valid in the next. Almost all of these local programs are about identity, insurance, bonding and fees rather than trade competence, and none of them reviews or credits a residential contractor license held in another state. Roofing is the exception in the other direction: the State license is mandatory everywhere in Illinois, and cities from Rockford to Joliet to Cook County check it at the permit counter.

Chicago. This is the license that matters. 'A City of Chicago general contractor license is required to perform most types of building construction, alteration, repair, and demolition work within the City of Chicago', and it is needed to bid on, undertake, hire or supervise, or control the means and methods of work requiring a building, sign or demolition permit. Licenses are issued to businesses, including sole proprietorships, in five classes set by project value - the fair market value of materials and labor supplied by all contractors and subcontractors across all concurrent and consecutive work at the same site. The two classes a homebuilder or remodeler usually needs are Class D, capped at $4 million with ordinary demolition and $2 million per occurrence of insurance, at a $900.00 license and renewal fee, and Class E, capped at $500,000 with no demolition and $1 million per occurrence, at $300.00. There is no exam, no experience review and no qualifying party. The application asks for a statement of financial solvency in the format supplied, proof of authority to do business in Illinois (not required for sole proprietors), an Assumed Name Certificate from the County Clerk if a trade name is used, proof of insurance for the class from an insurer authorized in Illinois and rated B+ or better by A.M. Best, and government photo identification for the controlling persons. Continental Testing Services processes the application and renewal by mail for the Department of Buildings; the license runs one year and 'is automatically inactivated if the associated insurance policy expires.' Reinstatement costs $100.00 per year or part year expired.

Chicago, work that does not need a permit. A business that fixes, replaces, alters, modernizes, improves or adds to residential property but does not need a building permit takes a Home Repair license from Business Affairs and Consumer Protection instead: $1,000.00 for a two-year term, with a certificate of insurance of at least $300,000 per occurrence, and the rule that 'Home Repair licensees may not pull building permits.' A general contractor license replaces it - 'a home repair license is not required for a business that holds a General Contractor license', though a general contractor doing residential work must still follow the home repair consumer protection rules, which include a written estimate before work, a written invoice on completion, prior approval before exceeding the estimate, and the license number on contracts, advertisements and vehicles. Acquiring vacant land to build a new home, or renovating more than half of an existing building's floor area, requires a separate Residential Real Estate Developer license.

Cook County (unincorporated areas). 'All contractors performing work in unincorporated Cook County are required to register with the Cook County Department of Building and Zoning.' Registration costs $150 per trade initially and $75 per trade annually, due by December 31, and needs a $1,000,000 general liability certificate naming Cook County Building and Zoning at 69 W. Washington, Suite 2830, Chicago as certificate holder, filed by the owner or a corporate officer with the Articles of Incorporation or the current Annual Domestic Report. Roofing registrants must submit the State of Illinois roofing license and demolition registrants an approved bond. There is no exam. Homeowners who live on the property get 'General' contractor registration free of charge. Use the county's CookViewer tool first to check whether a site is actually unincorporated. Contact [email protected] or 312-603-0512.

Aurora. The Division of Building and Permits registers a General contractor for a $200 fee. The packet is the Contractor Licensing Application, a certificate of insurance naming the City of Aurora as primary and non-contributory additional insured with $1,000,000 general aggregate and $500,000 per occurrence, workers' compensation in compliance with Illinois statute, and proof the business is registered with the Secretary of State or a county DBA certificate. There is no test for the General category - Aurora's municipal testing applies only to electrical and mechanical contractors, who may use ICC certifications or a license from an accepted testing municipality instead. Roofing registration is also $200 and requires the state license, and workers' compensation cannot be replaced by an employee affidavit for roofers. Outstanding or expired permits will block a renewal. Submit to [email protected]; 77 S Broadway, (630) 256-3130.

Evanston. 'All contractors performing work within City limits are required to register with the City, including but not limited to General Contractors, Electrical, Carpentry, Concrete, Excavation, Masonry, Landscaping, Fence, Roofing and Sign contractors.' General Contractor registration is $150 and trade registration $125, both renewable annually through the Citizen Portal. Insurance must be general liability of at least $300,000 per occurrence, bodily injury of at least $100,000 per occurrence, property damage of at least $100,000 per occurrence and workers' compensation at statutory minimums, with Evanston as certificate holder; sole proprietors and partnerships with no employees may file an affidavit in place of workers' compensation, and right-of-way work needs $1,000,000 per occurrence naming the city as additional insured. State-regulated contractors submit a copy of the state license. An owner-occupant of a single-unit residence may act as their own general contractor.

Joliet. 'All contractors performing work within the City of Joliet must have current registration on file prior to permit issuance. There are no forms or fees for registration, unless you are a Sign Erector or for HVAC Testing.' Registration is a certificate of insurance naming the City of Joliet as certificate holder, with minimum limits of $250,000 bodily injury per person, $500,000 bodily injury per occurrence and $250,000 property damage per occurrence, emailed to [email protected]. Roofing needs the Illinois State Roofer's License, plumbing the Illinois Plumbing Contractor Registration, irrigation the state irrigation license, siding a Vinyl Siding Installers certificate, and electrical and HVAC a license from one of the municipalities Joliet accepts. Electrical, plumbing and HVAC contractors also file a project-specific Letter of Intent, and all subcontractors must be listed on the permit application.

Rockford. 'General contractors are not required to be licensed.' Rockford requires a building permit for any structure over 120 square feet that is constructed, altered, enlarged, repaired or moved, and for all roofing work, and notes that 'roofing contractors are required to obtain a license from the State of Illinois Department of Professional Regulation.' Tent erectors and outdoor sign contractors need annual city licenses.

Springfield. The Building and Zoning Department's published list of applications contains electrical and mechanical contractor registrations and licenses and nothing else for contractors - there is no general contractor or home improvement registration. The city's building permit application collects the general contractor's name and address but asks for a license number only on the roofing line. Building and Zoning is at 300 South 7th Street, Room 304, (217) 789-2171.

Peoria. Peoria's Contractor Business Licenses cover only four activities - parking lot paving, sidewalk and driveway work, placing a dumpster or storage unit in the right-of-way, and sewer connections - at $25.00 or $60.00 a year with license and permit bonds of $5,000 or $10,000. Its trade licenses cover electrical and HVAC contractors at $150.00 each, issued to individuals rather than businesses and requiring an open-book ICC exam unless the applicant holds a Normal or Pekin license, plus boiler tender and stationary engineer licenses. There is no general building contractor or residential builder license in Peoria.

Everywhere else. Other Illinois municipalities set their own rules and most of them register rather than license residential builders. Ask the building or development services department of each city, village or county before contracting there, and confirm the current fee and insurance limits before buying coverage, because these are set locally and change independently.

Moving to IllinoisLeaving Illinois

Common questions

Do I have to take the South Carolina residential contractor exam if I'm licensed in Illinois?
The trade exam is waived, but South Carolina requires a law or code exam.
What does it cost to get a South Carolina residential contractor license from Illinois?
Published fees on this path total $355, not counting exam vendor fees or bonds.
Do my Illinois work hours count in South Carolina?
Yes. Documented out-of-state experience counts toward South Carolina's eligibility requirements.
Does it work the other way, from South Carolina to Illinois?
Not necessarily. Reciprocity is directed. Going from South Carolina to Illinois, the mechanism is not applicable.

Sources

  1. NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
  2. S.C. Code of Laws Title 40, Chapter 59 - Residential Builders and Residential Specialty Contractors · S.C. Code Ann. Sections 40-59-20, 40-59-30, 40-59-220, 40-59-230, 40-59-250, 40-59-410 · South Carolina Legislature · Statute · verified September 17, 2026
  3. South Carolina Residential Builders Commission - home page · South Carolina Department of Labor, Licensing and Regulation (LLR) · Agency Page · verified September 17, 2026
  4. SC Residential Builders Commission - Residential Builder License Application, Requirements and Instructions (Rev. 01/2026) · South Carolina Department of Labor, Licensing and Regulation (LLR) · Form · verified September 17, 2026
  5. SC Residential Builders Commission - Residential Builder License (licensure by exam, licensure by exam waiver, fees) · South Carolina Department of Labor, Licensing and Regulation (LLR) · Agency Page · verified September 17, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related