LicensebyState

Indiana to Oregon: residential contractor license reciprocity

No credit· Start overVerified September 17, 2026· 13 sources

Indiana does not issue a statewide residential contractor license, so there is nothing to transfer. Here is Oregon's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

CCB application with the NASCLA examination in place of the pre-license training (every state)

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

Oregon runs no contractor reciprocity at all. OAR 812-006-0300(6) says in terms that there are no reciprocal agreements with other states or with organizations that test contractors, and nothing in ORS chapter 701 recognizes a license issued elsewhere, so a residential contractor license held in another state does not by itself waive or shorten any step here. What the Board does accept is the NASCLA Accredited Examination for Commercial General Building Contractors: under OAR 812-006-0310 an RMI who has passed it satisfies the 16-hour pre-license training requirement outright, whenever the exam was taken, and only has to sit the Oregon contractor test, with the pass proved by the RMI's entry in the NASCLA National Examination Database. That rule sits in the division governing every RMI and is not limited to a commercial endorsement, so it is available to an applicant taking the Residential General Contractor endorsement. An RMI without the NASCLA credential simply takes 16 hours of training from a CCB-approved provider first and then the same Oregon test. There is no trade or classification examination in Oregon at all: the only test is the Oregon contractor test on laws, rules and business practices, 80 scored questions in 180 minutes with 70 percent to pass, open book against the NASCLA Contractors Guide to Business, Law and Project Management for Oregon, and it is never waived. Everything after that is the same for an applicant from any state: registration with the Oregon Secretary of State, a $25,000 residential bond and at least $500,000 per occurrence of liability insurance filed on the Board's own forms, workers' compensation cover if the business has employees, and the $400 application fee.

Oregon requires no trade experience for a residential endorsement, so documented out-of-state years neither shorten nor replace any step at this level. Two other routes to RMI status exist but rarely help an inbound contractor: continuous association with an Oregon-licensed business from before 1 July 2000 with no lapse over 24 months, and a sole proprietor exemption under Oregon Laws 2018 chapter 46. Separately, OAR 812-003-0265 gives the spouse of an active-duty servicemember stationed in Oregon a temporary authorization of up to two years on a current out-of-state general, commercial or residential contractor license in good standing, proving competency by the NASCLA examination, the Oregon examination, or eight years of licensed contracting in another state, plus three hours of Board education and the usual fee, bond and insurance. The Board publishes no fee for the 16-hour pre-license training because each approved provider sets its own price; the provider list and the licensing call center on 503-378-4621 are where to ask. The license must be applied for within two years of passing the Oregon test.

At a glance

Trade exam
Waived
Law / code exam
Required
Out-of-state hours
Do not count
Typical processing
About 42 days

What you must already have

  • You must have passed a licensing exam in Indiana that the destination considers comparable.OAR 812-006-0310 accepts the pass whenever it was earned and proves it by the RMI's name appearing in the NASCLA National Examination Database, so no transcript is sent by the candidate. The NASCLA examination is an exam credential rather than a license or an interstate agreement, so it is open to a candidate from any state and gives no advantage tied to where the applicant is licensed now. It does not waive the Oregon contractor test, the bond, the insurance, the fee or any other requirement. An applicant without it takes 16 hours of approved training instead.
  • The business must designate at least one Responsible Managing Individual: an owner or an employee who exercises management or supervisory authority over the construction activities of the business. An RMI who is not an owner may serve only one licensee at a time, and a business that loses its RMI must appoint a replacement immediately or a temporary RMI for no more than 14 days, or the license is suspended.
  • You must have no disciplinary action or unresolved complaints on your record.ORS 701.098(1)(d). The application also requires five years of construction-related court judgments, administrative orders, pending complaints, convictions and indictments from any state, and unpaid construction debt blocks a new license for the business owners and for the RMI until it is satisfied.

What you'll do to get licensed in Oregon

  1. 1Other. At least 16 hours of pre-license training on business practices and law from a CCB-approved education provider, taken by the RMI. It is required of every applicant except an RMI who has passed the NASCLA Accredited Examination for Commercial General Building Contractors, and except the two narrow RMI routes based on pre-2000 Oregon licensure or the sole proprietor exemption. Providers set their own prices, so the Board publishes no figure; the approved provider list is on the CCB site and the education team can be reached on 503-934-2227. (if applicable).
  2. 2Law / code exam. Pass a law, rules, or code exam. The Oregon contractor test, administered by PSI at test centers in Oregon and other states or by remote proctor: 80 scored questions in 180 minutes, plus 8 unscored questions and 20 minutes, with 70 percent needed to pass. It is open book against the NASCLA Contractors Guide to Business, Law and Project Management for Oregon Construction Contractors, 2nd edition, which may be highlighted, tabbed and annotated beforehand. The subjects are Oregon contractor laws and regulations, business structure, employees, subcontractors, contracts, lien law, bidding and estimating, project management, building codes, jobsite safety, environmental factors, exterior shell, financial management and tax basics. A failed test may be retaken without limit, though not the same version on consecutive attempts, and the license application must follow within two years of the pass..
  3. 3Exam fee. Pay the exam fee ($60). PSI examination fee, payable when the test is scheduled. It covers first-time and repeat takers and stays valid for one year from the date of payment..
  4. 4Application fee. Pay the application fee ($400). CCB license application fee for a new license, set at $400 for applications received from 1 July 2025. It covers the two-year license; renewal is a further $400 every two years, and changing or adding an endorsement later costs $20. Application fees are not refunded. A licensee who is a sole proprietor or general partner on active duty in the armed forces does not pay a renewal fee falling due during that service..
  5. 5Surety bond. Post a surety bond ($25,000). A $25,000 residential surety bond for the Residential General Contractor endorsement, filed with the application. The Board accepts only its own CCB Residential Surety Bond form signed by an authorized agent of the surety or an attorney-in-fact, bearing a bond number, and filed within 60 days of the date the surety executed it. A residential bond answers only for residential and small commercial work, so a contractor also taking a commercial endorsement posts a second, commercial bond. Other residential endorsements carry different figures: $20,000 for Residential Specialty and $15,000 for Residential Limited and the restricted residential endorsements..
  6. 6Insurance. Carry the required insurance ($500,000). General liability insurance of at least $500,000 per occurrence for the Residential General Contractor endorsement, covering products and completed operations, with the certificate naming Construction Contractors Board, PO Box 14140, Salem, OR 97309 as certificate holder. Proof is filed with the application and again at every renewal. Residential Specialty needs $300,000 and Residential Limited $100,000. A contractor holding both a residential and a commercial endorsement carries a single policy at the higher of the two amounts..
  7. 7Insurance. Carry the required insurance (if applicable). Workers' compensation coverage, required of any business that is non-exempt, meaning it has employees. A sole proprietor with no employees, and a business in which every owner, officer or member is a family member, may file as exempt; the Board defines family as parents, spouses, sisters, brothers, daughters, sons, daughters-in-law, sons-in-law and grandchildren. A non-exempt applicant supplies its carrier, policy number, Workers' Compensation Division compliance number and employer tax identification numbers, and any change between exempt and non-exempt status must be reported to the Board within 10 days..
  8. 8Business license. Obtain a business license. A business entity that is required to register with the Oregon Secretary of State's Corporation Division must be registered, active and in good standing before the license issues, and every assumed business name used by the applicant must be registered as that entity's assumed business name. An out-of-state entity registers in Oregon in the same way..
  9. 9Background check. Complete a background check. The RMI clears a background check after the application is filed. The application itself asks the business and its owners and officers to disclose, for the five years before the application and from any state, unsatisfied construction-related court judgments and administrative orders, pending complaints alleging money owed, and judgments of conviction or indictments for the crimes listed in ORS 701.098, along with unpaid workers' compensation penalties and unpaid employee wages. Unsatisfied construction debt keeps both the owners and the RMI from obtaining a new CCB license until it is paid..
  10. 10Continuing education. Complete continuing education (if applicable). Not required to obtain the license. Each two-year license period a residential contractor must have an owner, officer, RMI or employee complete at least eight hours of continuing education, being three hours on CCB laws, regulations and business practices plus five hours of other approved courses. A contractor who has not held an Oregon residential license at any point in the six years before the renewal date completes an additional eight hours, so a newly licensed arrival owes 16 hours before the first renewal. Contractors who also hold certain Oregon licenses, including architect, engineer, electrician and plumber, are exempt..
  11. 11Other. A contractor whose Oregon work will include boiler, electrical, elevator or plumbing installation also needs the matching Building Codes Division contractor license, and OAR 918-030-0015 requires an active CCB license before the division will issue or renew one. The CCB license comes first, and it does not replace the division license..

Published fees on this path total $460, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Other · if applicable
  • Law / code exam
  • Exam fee · $60

Surety bond

A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.

  • Surety bond · $25,000

Liability insurance

Some states require proof of general liability or workers' compensation coverage at licensing time.

  • Insurance · $500,000
  • Insurance · if applicable

Business registration

If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.

  • Business license

Continuing education

Renewals usually need approved CE hours, often on the latest NEC. Reciprocal licensees are rarely exempt.

  • Continuing education · if applicable

How Oregon licenses residential contractors

Oregon residential contractor · “Construction contractor license with the Residential General Contractor (RGC) endorsement

Statewide license

Verified September 17, 2026· 6 sources

Issued by Oregon Construction Contractors Board (CCB)

Oregon licenses contractors statewide through the Construction Contractors Board, and under ORS 701.021 anyone who undertakes, offers to undertake or bids work as a contractor must hold a current CCB license and the endorsement that matches the work. The unusual part of Oregon's structure is that there is only one construction contractor license: what the applicant chooses is an endorsement, and the endorsement sets the bond and the insurance. The homes tier is the Residential General Contractor (RGC) endorsement, which allows an unlimited number of unrelated building trades on residential or small commercial structures and carries a $25,000 residential bond and general liability insurance of at least $500,000 per occurrence. Its narrower siblings are Residential Specialty ($20,000 bond, $300,000 insurance, one or two trades), Residential Limited ($15,000 and $100,000, for a business under $40,000 of gross sales a year and $5,000 a contract) and Residential Developer, and a license may carry one residential endorsement, one commercial endorsement, or one of each, in which case the contractor posts two bonds and carries one liability policy at the higher amount. The license is held by the business rather than by the person: a sole proprietor, partnership, LLC, corporation or trust applies, and it must at all times have at least one Responsible Managing Individual (RMI), an owner or employee who exercises management or supervisory authority over the construction activities and who has completed 16 hours of CCB-approved pre-license training and passed the Oregon contractor test. Oregon sets no net worth, working capital or financial statement test and no minimum trade experience for a residential endorsement, so a builder moving to Oregon applies as or for the business that will sign the contracts and names themselves as its RMI.

Moving to OregonLeaving Oregon

Why Indiana has nothing to transfer

Indiana residential contractor · “Residential Contractor / Residential General Contractor / Home Improvement Contractor (city- or county-issued)

Licensed by cities and counties

Verified September 17, 2026· 16 sources

Issued by No state authority; cities and counties license, register or exempt residential contractors

Indiana issues no statewide residential contractor, home builder or remodeler license. The Indiana Professional Licensing Agency's list of state-licensed professions covers plumbing, home inspectors, manufactured home installers, architects and surveyors and contains no residential or general building contractor credential, and the Indiana Department of Homeland Security's Division of Fire and Building Safety enforces the state building code and inspects boilers, elevators and fire safety devices without licensing builders. What Indiana licenses at state level is plumbing, through the Indiana Plumbing Commission at the PLA, plus manufactured home installation and home inspection; electricians and HVAC technicians are licensed by cities and counties too, so a builder who self-performs those trades still qualifies locally. Homebuilding is governed jurisdiction by jurisdiction, and the range is wide: Fort Wayne and Allen County, Evansville and Hammond each run a written competency examination for a residential builder, Indianapolis and South Bend require a bonded and insured company license or registration with no exam, and the Monroe County sign-up that covers Bloomington is voluntary and free. The Indiana Attorney General's own consumer fact sheet says that "licensing requirements vary from community to community" and tells homeowners to check with the city or county building department. A residential contractor moving to Indiana therefore has no state license to transfer and no reciprocity to apply for; the work is qualifying separately in each place where permits will be pulled, and state law separately requires any home improvement contract over $150 to be in writing.

How local licensing works in Indiana

How it works in Indiana. There is no state contractor board, no state application and no state exam, so each city or county writes its own contractor ordinance under the state building code. A residential builder must hold whatever credential the jurisdiction issues in every place where they pull permits, and a license from one Indiana jurisdiction does not carry into the next. The credentials fall into two very different kinds. In Fort Wayne and Allen County, Evansville and Hammond a person sits a written examination and is approved by a licensing board; in Indianapolis and South Bend the license is a business filing backed by a surety bond and insurance with no test at all; and in Monroe County, which covers Bloomington, signing up as a general contractor is optional. Nothing an arriving contractor holds from another state waives any of it, and none of the jurisdictions below publishes a route that converts an out-of-state residential builder license into a local one.

Indianapolis and Marion County. The Department of Business and Neighborhood Services issues a single General Contractor license that covers houses as well as commercial work; the same application form carries checkboxes for Electrical, General, HVAC, Plumbing and Wrecking. The packet is proof of business registration (Indiana Secretary of State, or a county DBA filing for a sole proprietor or partnership), a certificate of insurance naming the Consolidated City of Indianapolis and Marion County as certificate holder and additional insured with general liability of at least $500,000 for each occurrence of death or bodily injury and $100,000 for each occurrence of property damage, or $500,000 per occurrence combined, worker's compensation coverage or a Worker's Compensation Board exemption waiver, and a typed $10,000 license or permit surety bond naming "Consolidated City of Indianapolis and/or an Unknown Third Party" as obligee. Licenses expire on December 31 of even-numbered years and renew every two years; the new-license fee is prorated across the term ($247.00, $185.00 and $124.00 at the three stages published in the current packet) and renewal is $247.00. Up to five authorized agents may be listed free, with $63.00 for each additional agent, and every new license listing must attend an orientation class within 60 days of issuance. There is no examination, experience or qualifying-individual requirement on the General type. Contractor Licensing, 200 E. Washington St., Suite 107, (317) 327-1291, [email protected].

Fort Wayne and Allen County. The Allen County Building Department runs the most structured program in the state, under Allen County Code 6-1-3-3 and its Rules & Regulations. The residential tiers are the Residential Contractors License, "limited to building construction, remodeling, repair, or improvement of one or two-family residences not exceeding two stories in height," and the Home Improvement Contractors License, which covers "improving, remodeling, and repair of existing one- and two-family structures" plus unattached garages and accessory buildings but not additions. Each is a personal license that then qualifies one business registration, and the contractor must also register a full-time Superintendent as the responsible supervisor named on each building permit. The rules state that "examinations shall be required in order for applicants to obtain a license," prepared or administered by the Building Commissioner or an approved testing facility; the exam fee is set by the Commissioner and is not printed in the rules. Annual fees are $60.00 for the Residential Contractors license, $60.00 for Home Improvement Contractors and $25.00 for each Superintendent registration, and every license expires on December 31. A license that lapses for twelve months or more can be revived by paying the outstanding fees, but if the applicable code edition changed during the lapse the holder "must apply for a new license and retest." Allen County does have a reciprocity clause: licensing reciprocity is granted subject to the guidelines for the individual trade and still requires the applicant to meet the county's minimum qualifications, and the Building Commissioner may use discretion for an applicant who presents evidence of the necessary credentials. The guidelines themselves are not published in the rules, so ask the Building Department what it will accept before assuming an out-of-state credential counts.

Evansville. The Building Commission licenses a Residential General Contractor, defined as a person in the business of "wrecking, constructing, installing, repairing, remodeling, or servicing any structural or nonstructural portions of any one- or two-family dwellings and residential or agricultural building, including residential roof coverings and site work." The route is a real qualification: submit the application with three letters of recommendation proving at least four years of experience in the field, wait for board approval to test, then schedule and pay for the exam through Ivy Tech at (812) 429-9852. The exam is open book with tabbed and highlighted references, and 70 percent passes for the contractor categories. A provisional license issues on payment plus proof of insurance and bond, and the Licensing and Disciplinary Board gives final approval on the fourth Thursday of the month. A Residential General Contractor carries general liability insurance of at least $500,000, a $25,000 surety bond on the Commission's own form and worker's compensation coverage or an affidavit of exemption, all within six months of passing the exam. Fees on the published schedule are $210.00 new, $150.00 renewal and $285.00 for a two-year renewal. A homeowner may permit work on their own residence without a license, but footing, foundation, framing and roofing subcontracted outside the immediate family must go to a licensed contractor.

South Bend and St. Joseph County. "All contractors, including subcontractors, must be registered or licensed with the Building Department in order to perform work in St. Joseph County and City of South Bend," except an owner-occupant working on their own single-family dwelling. There is one Building Contractor Registration covering houses and commercial work alike. It is a paperwork registration: the Pre-Licensing Registration Form, a $5,000 surety bond and the $125 registration fee, processed at the counter the same day. No exam, experience or reference requirement applies to it - the only categories the city reviews are Electrical and HVAC, which need a full application packet, a $50 application review fee and ten business days. Building Department, 215 S. Dr. Martin Luther King, Jr., Suite 100, [email protected], 574.235.9554.

Hammond and Lake County. Hammond tests residential builders. The Inspections Department issues a Residential General contractor license, and the exams "are given on the first Monday of the month at 10:00 a.m. at the Hammond Sportsplex" - open book, calculators allowed, one hour, 70 percent to pass, on the 2018 IRC with Indiana amendments or the 2020 Indiana Residential Code. The non-refundable examination fee is $100, with a $50 re-examination fee after a missed sitting, and the application must arrive a week before the test date together with a $20 limited criminal history report from the Hammond Police Department. Attendance at the Building Contractors Board, 6:00 p.m. on the first Monday of every month, is mandatory for approval. After approval the licensee files a certificate of insurance naming the City of Hammond with liability of 100,000/300,000 bodily injury and 50,000 property damage, worker's compensation or a waiver, and a $5,000 license and permit bond written in the name of the "Board of Lake County Commissioners, all Cities, Towns and Municipalities of Lake County, Indiana" and recorded at the Lake County Recorder's Office in Crown Point. The license fee is $200.00 initially and $100.00 on renewal, due between January 1 and January 31; licenses expire December 31 and are void if not renewed by June 30. An out-of-state corporation must also file a Certificate of Foreign Registration with the Indiana Secretary of State. The application asks in which localities you are already licensed, but holding a license elsewhere does not excuse the test.

Bloomington and Monroe County. Building permits for Bloomington come from the Monroe County Building Department at 501 N. Morton Street, and the county's licensing program is aimed at the trades rather than at builders. Monroe County licenses Plumbing Journeymen and Plumbing Contractors and Master and Residential Electricians, but its general contractor record is a sign-up, not a license: "this application is voluntary and includes a sign up of General Contractors in the Monroe County area ... there are no fees or attachments required to sign up." Licensees who do hold a county credential must carry public liability and property damage insurance naming Monroe County as an additional assured, at $500,000 combined single limit or $500,000 per occurrence for injury or death and $100,000 for property damage, plus worker's compensation unless they have no employees. Building Department, (812) 349-2580; counter hours for licenses and payments are 9-11 am and 1-3 pm.

Everywhere else. Indiana's other cities and counties set their own rules, and many smaller jurisdictions require only a building permit and proof of insurance. Ask the building or inspections department in each place before contracting there, and remember the statewide consumer rule that applies no matter where you are licensed: a home improvement contract over $150 must be in writing and must state the price, payment schedule, a detailed description of the work and materials, estimated start and completion dates and the contractor's name, address and signature.

Moving to IndianaLeaving Indiana

Common questions

Do I have to take the Oregon residential contractor exam if I'm licensed in Indiana?
The trade exam is waived, but Oregon requires a law or code exam.
What does it cost to get a Oregon residential contractor license from Indiana?
Published fees on this path total $460, not counting exam vendor fees or bonds.
Do my Indiana work hours count in Oregon?
No. Oregon does not credit out-of-state hours on this path.
How long does the application take?
The board's published or typical processing time is about 42 days.
Does it work the other way, from Oregon to Indiana?
Not necessarily. Reciprocity is directed. Going from Oregon to Indiana, the mechanism is not applicable.

Sources

  1. NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
  2. CCB Frequently Asked Questions (application), updated 3/2026 · Oregon Construction Contractors Board · Faq · verified September 17, 2026
  3. Construction Contractors Board - Continuing education · Oregon Construction Contractors Board · Agency Page · verified September 17, 2026
  4. CCB License Endorsements chart (11/2024) · Oregon Construction Contractors Board · Other · verified September 17, 2026
  5. Oregon Construction Contractors Board Examination Candidate Information Bulletin (PSI) · Oregon Construction Contractors Board / PSI Services LLC · Other · verified September 17, 2026
  6. Construction Contractors Board - How to get a CCB license (9 steps) · Oregon Construction Contractors Board · Agency Page · verified September 17, 2026
  7. CCB Sole Proprietorship License Application · Oregon Construction Contractors Board · Form · verified September 17, 2026
  8. Construction Contractors Board - Licensing (bonds, insurance, public works bond) · Oregon Construction Contractors Board · Agency Page · verified September 17, 2026
  9. OAR chapter 812, division 3 - Construction Contractors Board licensing · OAR 812-003-0131, 812-003-0142, 812-003-0152, 812-003-0153, 812-003-0260, 812-003-0265, 812-003-0270 · Oregon Secretary of State · Admin Rule · verified September 17, 2026
  10. OAR chapter 812, division 6 - Responsible Managing Individual, pre-licensure training, and testing · OAR 812-006-0100, 812-006-0110, 812-006-0150, 812-006-0160, 812-006-0300, 812-006-0310, 812-006-0450 · Oregon Secretary of State · Admin Rule · verified September 17, 2026
  11. OAR chapter 812, division 22 - Continuing education for residential contractors · OAR 812-022-0010, 812-022-0020 · Oregon Secretary of State · Admin Rule · verified September 17, 2026
  12. OAR 918-030-0015 - Contractor licenses (Building Codes Division requires a CCB license) · OAR 918-030-0015 · Oregon Secretary of State · Admin Rule · verified September 17, 2026
  13. ORS chapter 701 - Construction Contractors and Contracts (2025 edition) · ORS 701.005(16)-(17), 701.021, 701.042, 701.046, 701.050, 701.056, 701.063, 701.068, 701.073, 701.081, 701.084, 701.091, 701.098, 701.122 · Oregon Legislature · Statute · verified September 17, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related