LicensebyState

Kentucky to North Carolina: residential contractor license reciprocity

No credit· Start overVerified September 17, 2026· 7 sources

Kentucky does not issue a statewide residential contractor license, so there is nothing to transfer. Here is North Carolina's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

Residential Contractor license by examination (states without a waiver agreement)

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

An out-of-state residential builder arriving from a state that has no examination waiver agreement with North Carolina gets no credit for the license held elsewhere. The applicant entity files the online application, names a qualifier, shows financial responsibility for the limitation it wants, clears the background check and supplies character references, and the qualifier then sits the North Carolina Residential Contractor examination: 90 questions, 210 minutes, 70% to pass, open book against the North Carolina State Building Code and the Board law and rule references. Because North Carolina requires no trade experience for a general contractor license, documented out-of-state hours neither shorten nor replace any step. The Board does not publish a processing time; the application portal and the Board at (919) 571-4183 are where to ask.

There is no separate Business and Law examination on this path: North Carolina law, licensing, liens, erosion and sedimentation control and building code questions sit inside the Residential Contractor examination itself, and 21 NCAC 12A .0402(b) requires every applicant to be tested on the Board’s laws and rules. The standalone Business and Law examination is the one required of applicants who come in on an out-of-state examination waiver or on the NASCLA examination. The Board accepts the NASCLA Accredited Examination for the Building classification, not the Residential classification, so it is authored on the general level of this page. Licenses expire on the first day of January after issue and renew at $75, $100 or $125 by limitation. Ask the Board to confirm which examinations you owe before you pay PSI.

At a glance

Trade exam
Required
Law / code exam
Not required
Out-of-state hours
Do not count

What you must already have

  • The qualifier is at least 18 years old and possesses good moral character as determined by the Board (G.S. 87-10). North Carolina sets no minimum trade experience or apprenticeship hours for a general contractor license.

What you'll do to get licensed in North Carolina

  1. 1Trade exam. Pass the destination's trade exam. North Carolina Residential Contractor examination administered by PSI Services LLC after the Board approves the application and issues an eligibility letter: 90 questions, 210 minutes, 70% to pass, open book. One examination is required for each classification sought (21 NCAC 12A .0403). There is no published waiting period between attempts within a 12-month window..
  2. 2Application fee. Pay the application fee ($75). Nonrefundable application fee set by the limitation requested: $75 for a limited license, $100 for an intermediate license and $125 for an unlimited license (G.S. 87-10(a1); 21 NCAC 12A .0304(a)). The amount shown is the limited-license fee..
  3. 3Exam fee. Pay the exam fee ($79). $79 per examination, paid to PSI Services LLC when the examination is scheduled. One fee for each examination taken..
  4. 4Financial responsibility. Show financial responsibility of at least $17,000. Evidence of financial responsibility for the entity that will hold the license. Current assets must exceed current liabilities by at least $17,000 for a limited license (or total net worth of at least $80,000), $75,000 for an intermediate license, or $150,000 for an unlimited license. Intermediate and unlimited applicants must show the figure in an agreed-upon procedures report on the Board form or an audited financial statement prepared by a CPA or independent accountant. Statements must be no more than twelve months old and conform to GAAP (21 NCAC 12A .0204). The amount shown is the limited-license working capital figure..
  5. 5Surety bond. Post a surety bond ($175,000) (if applicable). Optional alternative to the working capital or net worth figure: a continuous surety bond of $175,000 for a limited license, $500,000 for an intermediate license or $1,000,000 for an unlimited license, from a surety authorized in North Carolina and rated Superior or Excellent by A.M. Best. Proof is filed with the application and with every annual renewal, and the bond must stay in force until the licensee can show the required working capital (21 NCAC 12A .0204(e))..
  6. 6Background check. Complete a background check. Criminal background check through the third-party vendor the Board names, paid directly to the vendor. Every qualifier submits to the check, along with the sole proprietor, the president of a corporation, all managers and members of an LLC, or all partners of a partnership (21 NCAC 12A .0303(b))..
  7. 7Business license. Obtain a business license. The license is issued to a legal entity, so the individual, corporation, LLC or partnership that will contract must be formed and, if organized outside North Carolina, authorized to transact business in the State before the license is issued (G.S. 87-10.1)..
  8. 8Insurance. Carry the required insurance (if applicable). The Board states there is no insurance or bonding requirement for a general contractor license itself. North Carolina workers compensation law still applies to the business independently of licensure, and owners, lenders and general contractors commonly require general liability coverage by contract..
  9. 9Continuing education. Complete continuing education. Renewal condition rather than an entry requirement: at least one qualifier on a building, residential or unclassified license must complete eight hours of Board-approved continuing education each year, made up of a two-hour mandatory course and six elective hours, with up to four elective hours carried forward (G.S. 87-10.2)..
  10. 10Other. Letters of character reference required by 21 NCAC 12A .0303(a)(9) and .0308, certified copies of court records for any criminal convictions of the applicant or its qualifiers, and disclosure of disciplinary history with this or any other licensing agency..

Published fees on this path total $154, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Trade exam
  • Exam fee · $79

Surety bond

A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.

  • Surety bond · $175,000 · if applicable

Business registration

If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.

  • Business license

Liability insurance

Some states require proof of general liability or workers' compensation coverage at licensing time.

  • Insurance · if applicable

Continuing education

Renewals usually need approved CE hours, often on the latest NEC. Reciprocal licensees are rarely exempt.

  • Continuing education

How North Carolina licenses residential contractors

North Carolina residential contractor · “General Contractor, Residential classification (Limited, Intermediate or Unlimited)

Statewide license

Verified September 17, 2026· 5 sources

Issued by North Carolina Licensing Board for General Contractors

North Carolina licenses residential building contractors statewide through the North Carolina Licensing Board for General Contractors. A license is required for any single undertaking costing $40,000 or more, and the Residential classification covers construction and demolition of residential units built to the North Carolina Residential Building Code, together with the ancillary site work, driveways, sidewalks and water and wastewater systems and certain specialty work on those units. The license belongs to the business, not the person: it is issued to an individual, corporation, LLC or partnership and is qualified by a named qualifier, an owner, officer, member or responsible managing employee who personally passes the examination, so an inbound contractor applies as or for the entity that will sign contracts. Every license also carries a monetary limitation driven by financial responsibility rather than by skill: Limited allows single projects up to $750,000, Intermediate up to $1,500,000 and Unlimited has no project cap. North Carolina sets no minimum experience or apprenticeship hours, so out-of-state years do not shorten anything, and the Board says it does not have full reciprocity with any state; what it does have is examination waiver agreements with a short list of named states.

Moving to North CarolinaLeaving North Carolina

Why Kentucky has nothing to transfer

Kentucky residential contractor · “Building or residential contractor license or registration (city- or county-issued)

Licensed by cities and counties

Verified September 17, 2026· 14 sources

Issued by No state authority; cities and counties license or register residential building contractors

Kentucky issues no statewide residential building, home builder or home improvement contractor license, so an out-of-state residential builder has nothing at state level to transfer and no state reciprocity to apply for. What Kentucky does license is the trades: the Department of Housing, Buildings and Construction (HBC) says on its own home page that it "licenses/certifies plumbers, electricians, boiler contractors, sprinkler and/or fire alarm contractors and building inspectors", and its administrative regulations in Title 815 add heating, ventilation and air conditioning licensing, elevator safety, boilers and pressure vessels, manufactured homes and home inspectors. Anyone self-performing plumbing, electrical, HVAC, boiler or fire-protection work in Kentucky needs the matching HBC license whatever the local building rules say, and that is where the state-level reciprocity conversation belongs. Housing work itself is licensed jurisdiction by jurisdiction and the rules differ sharply: Louisville Metro issues a Building Type A - Residential contractor license with six hours of continuing education before each renewal, Lexington-Fayette registers a "general contractor, residential only" class under its Contractors Registration Ordinance, and the joint Bowling Green - Warren County Contractors Licensing Board issues a General Contractors License for remodeling and building. Owensboro and Covington sit at the other end: neither publishes a contractor competency license at all, and a builder there files an occupational business license and carries insurance instead. None of these credentials involves a trade or business-law exam, and none of them gives any weight to a license held in another state, so the practical work is registering in each place where permits will be pulled and carrying the insurance each one demands.

How local licensing works in Kentucky

How local licensing works. No Kentucky agency licenses residential builders or remodelers, and there is no state qualifying party, no state exam and no state reciprocity for this work. Each city and county decides for itself, so identify the building department with jurisdiction over the address before applying anywhere. A credential issued by one Kentucky jurisdiction does not carry into the next one, and none of the jurisdictions below grants anything for a license held in another state. Two statewide obligations apply wherever the project is: the HBC license for any self-performed plumbing, electrical, HVAC, boiler or fire-protection work, and compliance with the Kentucky Building Code adopted in 815 KAR Chapter 007.

Louisville Metro (Jefferson County). The Office of Construction Review issues the contractor licenses for the merged city-county. A builder chooses a term and then a scope. License A "lets you work on one or more permitted projects during a calendar year, which runs from January 1st to December 31st"; License B "allows you to work on only one permitted project during a calendar year." The scopes are Building A-Residential, Building A-Residential/Commercial, Building A-Commercial and Building B. Building Type A costs $125 a year and Building Type B $50 per permit, and "only one Building Type B license will be granted per person/company per renewal year." Six continuing education credit hours from a pre-approved list are required before renewal for Building A-R, Building A-RC and Building B, which is to say for everyone whose scope touches houses. The filing is a certificate of liability insurance naming the Office of Construction Review as certificate holder, workers' compensation and unemployment insurance or a signed and notarized affidavit that neither applies, an Occupational License Number from the Revenue Commission of Jefferson County on (502) 574-4860, and the application itself through the Metro business portal. Annual renewals must arrive with current liability insurance, the continuing education records for residential contractors, a workers' compensation form and a subcontractor list, and "any missing items will result in ALL items being returned." There is no exam, no experience requirement and no bond on the building categories; only the wrecking classes carry a written exam, a surety bond and a year of supervisory experience. Office of Construction Review, 444 S. 5th St., Suite 100, (502) 574-3321.

Lexington-Fayette Urban County. The Division of Building Inspection runs a Contractors Registration Ordinance: "this ordinance requires all contractors to register with the Building Inspection" and "unregistered contractors cannot obtain building permits." There are three classes under Ordinance 5-90(a). A general contractor, residential only "constructs up to 4-family homes (4-Plex), performs home remodeling, and may supervise, arrange, and/or perform more than two unrelated building trades or crafts." A general contractor covers everything larger. A specialty contractor "performs commercial, industrial, public works and residential construction and specializes in two or fewer unrelated building trades or crafts." Registration takes four steps: a $10 Home Office Certificate or a $25 Certificate of Occupancy if the business address is in Fayette County; an occupational business license from Revenue at 218 E. Main St., 2nd floor, (859) 258-3340; general liability insurance and workers' compensation with LFUCG as certificate holder, or the "Workers Comp Exempt" declaration on the application if neither applies; and the online Contractor Registration Application through the city's permitting portal with the occupational license and certificate of insurance uploaded. No exam, experience or bond is required for any of the three classes. The division's published fee schedule prices permits rather than registrations and lists no contractor registration fee, so ask Building Inspection for the current amount before filing. 101 E. Vine St., (859) 258-3770, [email protected].

Bowling Green and Warren County. A single joint Contractors Licensing Board licenses for both the city and the county under Ordinance 91-58 WC and Ordinance 91-25 BG. A General Contractors License is needed by anyone "doing any type of general contract work in Bowling Green / Warren County including pulling permits for building or remodeling, construction management, or if you would have two or more subcontractors per job", and costs $250. A Specialty Contractors License covers subcontract work or a job with at most one subcontractor, and costs $100. Both fees are non-refundable and renewals are annual, pro-rated for a mid-year filing. The filing is the application plus a certificate of insurance naming the board as certificate holder, with "a minimum requirement for General Liability Insurance [of] $100,000 per occurrence", workers' compensation coverage shown on the certificate or a notarized Affidavit of Exemption, and a notarized Partnership Agreement for a partnership. Licenses are non-transferable and "any change in ownership nullifies previous licenses." There is no exam and no experience review, and the board says so directly: "the Contractors Licensing Board does not warrant that you are otherwise qualified to perform your trade or specialty by the issuance of its license." A Bowling Green occupational license is also needed for work inside the city limits and a Warren County occupational license for work outside them. Contractors Licensing Board, 1141 State Street, Suite 200, 270-781-3530.

Owensboro and Daviess County. There is no Owensboro contractor license. The Owensboro Metropolitan Planning Commission's Building & Electrical Division "issues all building and electrical permits required by the Kentucky Building Code and National Electrical Code" for Owensboro-Daviess County, along with HVAC, sign and parking lot permits and certificates of occupancy, and it issues no contractor credential of any kind. What a builder needs instead is the city's business registration: "any person, partnership, corporation, or other legal entity must register with the Occupational License Division prior to conducting business inside the city limits", with "a minimum license fee of seventy-five ($75.00) dollars due with registration." New construction draws at least three field inspections - footer and foundation, framing and final - before a certificate of occupancy issues. Occupational License Division, 101 East 4th Street, 270-687-5600.

Covington and Kenton County (Northern Kentucky). Planning and Development Services of Kenton County is the building department for Covington and the surrounding communities, and its rule is short: "when completing work within Kenton County, all contractors must obtain and maintain a Kenton County occupational license and provide proof of Kentucky workers' compensation insurance coverage. In addition, the Kentucky Department of Housing, Buildings, and Construction requires a license for electrical, HVAC, plumbing, and fire suppression work. Contractors must provide copies of all these items before any permits can be issued." There is no residential builder license, exam or bond. In Covington itself a zoning permit from the city, and a certificate of appropriateness where a historic preservation overlay applies, must come before PDS will issue the building permit. PDS, 1840 Simon Kenton Way, Suite 3400, Covington, 859-331-8980; building permits 859-957-2408.

Storm-damaged communities. The Attorney General's Office of Consumer Protection runs joint emergency contractor registration programs with the City of Mayfield and Graves County, the City of Princeton and Caldwell County, the City of Dawson Springs and Hopkins County, and the City of Bremen and Muhlenberg County, "to register contractors looking to assist storm victims." The program "requires contractors to register prior to doing business", and registrants are issued placards that must be displayed on the job site and in the vehicle. It is a consumer-protection registration aimed at transient storm-chasers rather than a skill license, and it applies only in those communities. Details on (502) 871-2424.

Everywhere else. The remaining Kentucky cities and counties each set their own rules, from a full licensing board like Bowling Green's to nothing beyond an occupational license and proof of insurance. Ask the local building department what it requires before bidding, and expect to repeat the filing in each jurisdiction.

Moving to KentuckyLeaving Kentucky

Common questions

Do I have to take the North Carolina residential contractor exam if I'm licensed in Kentucky?
Yes. North Carolina requires the trade exam on this path.
What does it cost to get a North Carolina residential contractor license from Kentucky?
Published fees on this path total $154, not counting exam vendor fees or bonds.
Do my Kentucky work hours count in North Carolina?
No. North Carolina does not credit out-of-state hours on this path.
Does it work the other way, from North Carolina to Kentucky?
Not necessarily. Reciprocity is directed. Going from North Carolina to Kentucky, the mechanism is not applicable.

Sources

  1. N.C.G.S. 87-10 - Application for license; examination; certificate; renewal · N.C.G.S. 87-10(a), (a1), (b), (c), (c1), (e) · North Carolina General Assembly · Statute · verified September 17, 2026
  2. Classifications and limitations - NC Licensing Board for General Contractors · North Carolina Licensing Board for General Contractors · Agency Page · verified September 17, 2026
  3. FAQ for Contractors - NC Licensing Board for General Contractors · North Carolina Licensing Board for General Contractors · Faq · verified September 17, 2026
  4. Laws and Regulations Applicable to General Contracting in the State of North Carolina (2026 edition) · 21 NCAC 12A .0202, .0204, .0303, .0304, .0402, .0403, .0404 · North Carolina Licensing Board for General Contractors · Admin Rule · verified September 17, 2026
  5. License applicants - NC Licensing Board for General Contractors · North Carolina Licensing Board for General Contractors · Agency Page · verified September 17, 2026
  6. Licensure Application Questions - License Type Selector (online application preview) · North Carolina Licensing Board for General Contractors · Form · verified September 17, 2026
  7. State of North Carolina Licensing Board for General Contractors - Candidate Information Bulletin · PSI Services LLC for the North Carolina Licensing Board for General Contractors · Other · verified September 17, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related