LicensebyState

Kentucky to North Carolina: general contractor license reciprocity

No credit· Start overVerified September 17, 2026· 9 sources

Kentucky does not issue a statewide general contractor license, so there is nothing to transfer. Here is North Carolina's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

NASCLA Accredited Examination in place of the North Carolina Building Contractor examination

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

North Carolina does not recognize an out-of-state general contractor license on its own, but it does accept the NASCLA Accredited Examination for Commercial General Building Contractors in place of its own Building Contractor trade examination. That route is open to anyone regardless of which state licensed them: sit the NASCLA examination before applying, then file the North Carolina application with the NASCLA pass letter and transcript purchase receipt attached and take the North Carolina Business and Law examination. Everything else still applies in full, including the financial responsibility figure for the limitation requested, the background check, character references and entity registration. An applicant who does not hold the NASCLA credential and comes from a state without a waiver agreement simply takes the North Carolina Building Contractor examination instead: 90 questions, 200 minutes, 70% to pass. North Carolina requires no trade experience for licensure, so out-of-state years do not shorten any step.

The Board confirms NASCLA acceptance on its own contractor FAQ and in 21 NCAC 12A .0303(c), which names the NASCLA examination alongside an origin state examination as the qualifying exam. The FAQ states acceptance for the Building classification; it does not say the NASCLA examination is accepted for the Residential classification. The NASCLA examination is bought and scheduled from NASCLA, not from the Board or PSI, and it is taken before the North Carolina application is filed. Without NASCLA and without a waiver agreement, substitute the North Carolina Building Contractor examination for the waived trade examination below; the Business and Law examination is then part of that classification examination rather than a separate sitting.

At a glance

Trade exam
Waived
Law / code exam
Required
Out-of-state hours
Do not count

What you must already have

  • You must have passed a licensing exam in Kentucky that the destination considers comparable.NASCLA Accredited Examination for Commercial General Building Contractors, passed before the North Carolina application is filed. The Board asks for the NASCLA pass letter and the transcript purchase receipt to be attached to the application.
  • The qualifier is at least 18 years old and possesses good moral character as determined by the Board (G.S. 87-10). North Carolina sets no minimum trade experience or apprenticeship hours for a general contractor license.

What you'll do to get licensed in North Carolina

  1. 1Law / code exam. Pass a law, rules, or code exam. North Carolina Business and Law examination: 40 questions, 90 minutes, 70% to pass, covering erosion and sedimentation control, licensing, liens, contracts, project management, safety and business practices. Required of applicants who qualify on the NASCLA examination rather than the North Carolina Building Contractor examination..
  2. 2Trade exam. Pass the destination's trade exam (if applicable). Not required if the NASCLA Accredited Examination has been passed. Otherwise the North Carolina Building Contractor examination applies: 90 questions, 200 minutes, 70% to pass, open book, administered by PSI Services LLC after the Board issues an eligibility letter..
  3. 3Application fee. Pay the application fee ($75). Nonrefundable application fee set by the limitation requested: $75 for a limited license, $100 for an intermediate license and $125 for an unlimited license (G.S. 87-10(a1); 21 NCAC 12A .0304(a)). The amount shown is the limited-license fee..
  4. 4Exam fee. Pay the exam fee ($79). $79 per examination, paid to PSI Services LLC when the examination is scheduled. The NASCLA examination itself is bought from NASCLA and is not covered by this fee..
  5. 5Financial responsibility. Show financial responsibility of at least $17,000. Evidence of financial responsibility for the entity that will hold the license. Current assets must exceed current liabilities by at least $17,000 for a limited license (or total net worth of at least $80,000), $75,000 for an intermediate license, or $150,000 for an unlimited license. Intermediate and unlimited applicants must show the figure in an agreed-upon procedures report on the Board form or an audited financial statement prepared by a CPA or independent accountant. Statements must be no more than twelve months old and conform to GAAP (21 NCAC 12A .0204). The amount shown is the limited-license working capital figure..
  6. 6Surety bond. Post a surety bond ($175,000) (if applicable). Optional alternative to the working capital or net worth figure: a continuous surety bond of $175,000 for a limited license, $500,000 for an intermediate license or $1,000,000 for an unlimited license, from a surety authorized in North Carolina and rated Superior or Excellent by A.M. Best. Proof is filed with the application and with every annual renewal, and the bond must stay in force until the licensee can show the required working capital (21 NCAC 12A .0204(e))..
  7. 7Background check. Complete a background check. Criminal background check through the third-party vendor the Board names, paid directly to the vendor. Every qualifier submits to the check, along with the sole proprietor, the president of a corporation, all managers and members of an LLC, or all partners of a partnership (21 NCAC 12A .0303(b))..
  8. 8Business license. Obtain a business license. The license is issued to a legal entity, so the individual, corporation, LLC or partnership that will contract must be formed and, if organized outside North Carolina, authorized to transact business in the State before the license is issued (G.S. 87-10.1)..
  9. 9Insurance. Carry the required insurance (if applicable). The Board states there is no insurance or bonding requirement for a general contractor license itself. North Carolina workers compensation law still applies to the business independently of licensure, and owners, lenders and general contractors commonly require general liability coverage by contract..
  10. 10Continuing education. Complete continuing education. Renewal condition rather than an entry requirement: at least one qualifier on a building, residential or unclassified license must complete eight hours of Board-approved continuing education each year, made up of a two-hour mandatory course and six elective hours, with up to four elective hours carried forward (G.S. 87-10.2)..
  11. 11Other. Letters of character reference required by 21 NCAC 12A .0303(a)(9) and .0308, certified copies of court records for any criminal convictions of the applicant or its qualifiers, and disclosure of disciplinary history with this or any other licensing agency..

Published fees on this path total $154, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Law / code exam
  • Trade exam · if applicable
  • Exam fee · $79

Surety bond

A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.

  • Surety bond · $175,000 · if applicable

Business registration

If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.

  • Business license

Liability insurance

Some states require proof of general liability or workers' compensation coverage at licensing time.

  • Insurance · if applicable

Continuing education

Renewals usually need approved CE hours, often on the latest NEC. Reciprocal licensees are rarely exempt.

  • Continuing education

How North Carolina licenses general contractors

North Carolina general contractor · “General Contractor, Building classification (Limited, Intermediate or Unlimited)

Statewide license

Verified September 17, 2026· 6 sources

Issued by North Carolina Licensing Board for General Contractors

The unlimited tier in North Carolina is the Building classification of the General Contractor license, issued by the North Carolina Licensing Board for General Contractors and required for any single undertaking costing $40,000 or more. The Building classification covers all building construction and demolition, commercial, industrial, institutional and residential alike, plus parking decks, site work and paving, storm drainage, retaining walls, recreational facilities and a list of specialty categories including concrete, masonry, roofing, metal erection, interior construction, swimming pools and asbestos. The Board also issues Highway, Public Utilities and Specialty classifications for work outside building construction, and separate North Carolina boards license the electrical, plumbing, heating and fire sprinkler trades. As with every classification, the license is held by a business and qualified by a named individual who passes the examination, and it carries a monetary limitation: Limited up to $750,000 per project, Intermediate up to $1,500,000, and Unlimited with no project cap, each set by the working capital, net worth or surety bond the applicant can show. North Carolina accepts the NASCLA Accredited Examination for this classification, and it holds examination waiver agreements with a short list of named states, but the Board states it does not have full reciprocity with any state.

Moving to North CarolinaLeaving North Carolina

Why Kentucky has nothing to transfer

Kentucky general contractor · “General or commercial building contractor license or registration (city- or county-issued)

Licensed by cities and counties

Verified September 17, 2026· 13 sources

Issued by No state authority; cities and counties license or register commercial building contractors

Kentucky has no statewide general, commercial or unlimited building contractor license, so there is nothing at state level for an out-of-state general contractor's license to transfer into, no qualifying party to designate with the state and no NASCLA route to take. The Department of Housing, Buildings and Construction licenses the trades instead - its home page says it "licenses/certifies plumbers, electricians, boiler contractors, sprinkler and/or fire alarm contractors and building inspectors", and 815 KAR adds HVAC licensing, elevator safety, boilers and pressure vessels, manufactured homes and home inspectors, with no chapter for building contractors anywhere in the title. Commercial building is controlled through local permitting, and the requirements are administrative rather than technical. Louisville Metro issues a Building Type A - Commercial license for $125 a year on a liability certificate, a workers' compensation filing and a Jefferson County occupational license number, with no exam and no bond. Lexington-Fayette registers a general contractor who "performs commercial, industrial, public works, and/or residential construction of larger than four-family homes" under its Contractors Registration Ordinance, and unregistered contractors cannot obtain building permits there. Bowling Green and Warren County run a joint Contractors Licensing Board whose $250 General Contractors License covers construction management and permit pulling, while telling applicants plainly that the license does not warrant that they are qualified. Owensboro and Covington require only an occupational business license and insurance. A commercial builder arriving in Kentucky therefore registers jurisdiction by jurisdiction and makes sure the plumbing, electrical, HVAC, boiler and fire-protection scope is performed under the correct HBC state licenses.

How local licensing works in Kentucky

How local licensing works. Kentucky has no state general contractor board, no state business-and-law exam for builders and no statewide reciprocity for commercial construction. Every rule that binds a general contractor is either a trade license from the Department of Housing, Buildings and Construction, the Kentucky Building Code in 815 KAR Chapter 007, or a local ordinance. Find the building department with jurisdiction over the site first, then register there before bidding. A registration in one Kentucky jurisdiction is worth nothing in the next, and an out-of-state general contractor license is worth nothing in any of them.

Louisville Metro (Jefferson County). The Office of Construction Review licenses building contractors for the merged city-county. License A covers "one or more permitted projects during a calendar year" and License B a single permitted project; the work scopes are Building A-Residential, Building A-Residential/Commercial, Building A-Commercial and Building B. Building Type A is "for building contractors seeking to obtain multiple permits within Louisville Jefferson County" at $125 a year on a term running 1 January to 31 December; Building Type B is $50 and is limited to one permit per person or company per renewal year. The filing is a certificate of liability insurance with the Office of Construction Review as certificate holder, workers' compensation and unemployment insurance or a notarized affidavit where the contractor has no covered employees, an Occupational License Number from the Revenue Commission of Jefferson County, and the application through the Metro business portal. The six-hour continuing education requirement attaches to the scopes that include housing - Building A-R, Building A-RC and Building B - so a contractor registered purely as Building A-Commercial is the one building class without it. Renewals must include a subcontractor list. There is no exam, experience review, bond or financial statement on any building class. 444 S. 5th St., Suite 100, (502) 574-3321.

Lexington-Fayette Urban County. The Division of Building Inspection registers every contractor under the Contractors Registration Ordinance, and "unregistered contractors cannot obtain building permits." The commercial class, under Ordinance 5-90(a)(1), is the general contractor, who "performs commercial, industrial, public works, and/or residential construction of larger than four-family homes (4-plex); and may supervise, arrange, and/or perform wholly or partly more than two building trades or crafts." A firm that concentrates on one or two trades registers as a specialty contractor instead. The filing is a Home Office Certificate ($10) or Certificate of Occupancy ($25) where the business address is in Fayette County, an occupational business license from Revenue, general liability and workers' compensation insurance with LFUCG named as certificate holder, and the online Contractor Registration Application with those two documents uploaded. No exam, experience or bond is required. The published Building Inspection fee schedule covers permits and lists no contractor registration fee, so confirm the amount with the division. 101 E. Vine St., (859) 258-3770.

Bowling Green and Warren County. One joint Contractors Licensing Board serves the city and the county under Ordinance 91-58 WC and Ordinance 91-25 BG. The General Contractors License, $250 and non-refundable, is required of anyone "doing any type of general contract work in Bowling Green / Warren County including pulling permits for building or remodeling, construction management, or if you would have two or more subcontractors per job." The Specialty Contractors License is $100 and covers subcontract work or a job with at most one subcontractor. Insurance is the substantive test: a certificate naming the board as certificate holder with general liability of at least $100,000 per occurrence, workers' compensation shown on the certificate or a notarized Affidavit of Exemption, and a notarized Partnership Agreement for partnerships. Licenses are non-transferable, renewals are annual and pro-rated mid-year, and a change of ownership voids the license. There is no exam or experience requirement; the board states that it "does not warrant that you are otherwise qualified to perform your trade or specialty by the issuance of its license." A city occupational license is needed for work inside Bowling Green and a county one for work outside it. 1141 State Street, Suite 200, 270-781-3530.

Owensboro and Daviess County. There is no contractor license here. The Owensboro Metropolitan Planning Commission's Building & Electrical Division issues building, electrical, HVAC, sign and parking lot permits and certificates of occupancy for Owensboro-Daviess County under the Kentucky Building Code and the National Electrical Code, and issues no contractor credential; demolition permits come from City of Owensboro Public Works. A commercial builder registers with the city's Occupational License Division before doing business inside the city limits, with a minimum license fee of $75 at registration. 101 East 4th Street, 270-687-5600.

Covington and Kenton County (Northern Kentucky). Planning and Development Services of Kenton County is the building department, and it requires that "all contractors must obtain and maintain a Kenton County occupational license and provide proof of Kentucky workers' compensation insurance coverage", plus the HBC state license "for electrical, HVAC, plumbing, and fire suppression work", with copies of all of it on file "before any permits can be issued." There is no general contractor license, exam or bond. In Covington a zoning permit precedes the building permit, and a certificate of appropriateness is needed first inside a historic preservation overlay. PDS, 1840 Simon Kenton Way, Suite 3400, Covington, 859-331-8980.

What does and does not travel. An out-of-state general contractor license, a NASCLA Accredited Examination and out-of-state project experience carry no weight in any Kentucky jurisdiction, because none of them tests or qualifies commercial builders. Kentucky is not a NASCLA participating state, and no Kentucky city on this page accepts an examination in place of its own filing. What does matter is holding, or employing someone who holds, the Department of Housing, Buildings and Construction license for each state-licensed trade in scope - plumbing, electrical, HVAC, boilers, fire sprinklers and fire alarms - because those licenses are statewide, are the only Kentucky construction credentials with reciprocity rules of their own, and are separately demanded by several of the local building departments above.

Moving to KentuckyLeaving Kentucky

Common questions

Do I have to take the North Carolina general contractor exam if I'm licensed in Kentucky?
The trade exam is waived, but North Carolina requires a law or code exam.
What does it cost to get a North Carolina general contractor license from Kentucky?
Published fees on this path total $154, not counting exam vendor fees or bonds.
Do my Kentucky work hours count in North Carolina?
No. North Carolina does not credit out-of-state hours on this path.
Does it work the other way, from North Carolina to Kentucky?
Not necessarily. Reciprocity is directed. Going from North Carolina to Kentucky, the mechanism is not applicable.

Sources

  1. NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
  2. N.C.G.S. 87-10 - Application for license; examination; certificate; renewal · N.C.G.S. 87-10(a), (a1), (b), (c), (c1), (e) · North Carolina General Assembly · Statute · verified September 17, 2026
  3. N.C.G.S. 87-15.1 - Reciprocity of licensing · N.C.G.S. 87-15.1 · North Carolina General Assembly · Statute · verified September 17, 2026
  4. Classifications and limitations - NC Licensing Board for General Contractors · North Carolina Licensing Board for General Contractors · Agency Page · verified September 17, 2026
  5. FAQ for Contractors - NC Licensing Board for General Contractors · North Carolina Licensing Board for General Contractors · Faq · verified September 17, 2026
  6. Laws and Regulations Applicable to General Contracting in the State of North Carolina (2026 edition) · 21 NCAC 12A .0202, .0204, .0303, .0304, .0402, .0403, .0404 · North Carolina Licensing Board for General Contractors · Admin Rule · verified September 17, 2026
  7. License applicants - NC Licensing Board for General Contractors · North Carolina Licensing Board for General Contractors · Agency Page · verified September 17, 2026
  8. Licensure Application Questions - License Type Selector (online application preview) · North Carolina Licensing Board for General Contractors · Form · verified September 17, 2026
  9. State of North Carolina Licensing Board for General Contractors - Candidate Information Bulletin · PSI Services LLC for the North Carolina Licensing Board for General Contractors · Other · verified September 17, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related