LicensebyState

Oklahoma to North Carolina: residential contractor license reciprocity

No credit· Start overVerified September 17, 2026· 7 sources

Oklahoma does not issue a statewide residential contractor license, so there is nothing to transfer. Here is North Carolina's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

Residential Contractor license by examination (states without a waiver agreement)

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

An out-of-state residential builder arriving from a state that has no examination waiver agreement with North Carolina gets no credit for the license held elsewhere. The applicant entity files the online application, names a qualifier, shows financial responsibility for the limitation it wants, clears the background check and supplies character references, and the qualifier then sits the North Carolina Residential Contractor examination: 90 questions, 210 minutes, 70% to pass, open book against the North Carolina State Building Code and the Board law and rule references. Because North Carolina requires no trade experience for a general contractor license, documented out-of-state hours neither shorten nor replace any step. The Board does not publish a processing time; the application portal and the Board at (919) 571-4183 are where to ask.

There is no separate Business and Law examination on this path: North Carolina law, licensing, liens, erosion and sedimentation control and building code questions sit inside the Residential Contractor examination itself, and 21 NCAC 12A .0402(b) requires every applicant to be tested on the Board’s laws and rules. The standalone Business and Law examination is the one required of applicants who come in on an out-of-state examination waiver or on the NASCLA examination. The Board accepts the NASCLA Accredited Examination for the Building classification, not the Residential classification, so it is authored on the general level of this page. Licenses expire on the first day of January after issue and renew at $75, $100 or $125 by limitation. Ask the Board to confirm which examinations you owe before you pay PSI.

At a glance

Trade exam
Required
Law / code exam
Not required
Out-of-state hours
Do not count

What you must already have

  • The qualifier is at least 18 years old and possesses good moral character as determined by the Board (G.S. 87-10). North Carolina sets no minimum trade experience or apprenticeship hours for a general contractor license.

What you'll do to get licensed in North Carolina

  1. 1Trade exam. Pass the destination's trade exam. North Carolina Residential Contractor examination administered by PSI Services LLC after the Board approves the application and issues an eligibility letter: 90 questions, 210 minutes, 70% to pass, open book. One examination is required for each classification sought (21 NCAC 12A .0403). There is no published waiting period between attempts within a 12-month window..
  2. 2Application fee. Pay the application fee ($75). Nonrefundable application fee set by the limitation requested: $75 for a limited license, $100 for an intermediate license and $125 for an unlimited license (G.S. 87-10(a1); 21 NCAC 12A .0304(a)). The amount shown is the limited-license fee..
  3. 3Exam fee. Pay the exam fee ($79). $79 per examination, paid to PSI Services LLC when the examination is scheduled. One fee for each examination taken..
  4. 4Financial responsibility. Show financial responsibility of at least $17,000. Evidence of financial responsibility for the entity that will hold the license. Current assets must exceed current liabilities by at least $17,000 for a limited license (or total net worth of at least $80,000), $75,000 for an intermediate license, or $150,000 for an unlimited license. Intermediate and unlimited applicants must show the figure in an agreed-upon procedures report on the Board form or an audited financial statement prepared by a CPA or independent accountant. Statements must be no more than twelve months old and conform to GAAP (21 NCAC 12A .0204). The amount shown is the limited-license working capital figure..
  5. 5Surety bond. Post a surety bond ($175,000) (if applicable). Optional alternative to the working capital or net worth figure: a continuous surety bond of $175,000 for a limited license, $500,000 for an intermediate license or $1,000,000 for an unlimited license, from a surety authorized in North Carolina and rated Superior or Excellent by A.M. Best. Proof is filed with the application and with every annual renewal, and the bond must stay in force until the licensee can show the required working capital (21 NCAC 12A .0204(e))..
  6. 6Background check. Complete a background check. Criminal background check through the third-party vendor the Board names, paid directly to the vendor. Every qualifier submits to the check, along with the sole proprietor, the president of a corporation, all managers and members of an LLC, or all partners of a partnership (21 NCAC 12A .0303(b))..
  7. 7Business license. Obtain a business license. The license is issued to a legal entity, so the individual, corporation, LLC or partnership that will contract must be formed and, if organized outside North Carolina, authorized to transact business in the State before the license is issued (G.S. 87-10.1)..
  8. 8Insurance. Carry the required insurance (if applicable). The Board states there is no insurance or bonding requirement for a general contractor license itself. North Carolina workers compensation law still applies to the business independently of licensure, and owners, lenders and general contractors commonly require general liability coverage by contract..
  9. 9Continuing education. Complete continuing education. Renewal condition rather than an entry requirement: at least one qualifier on a building, residential or unclassified license must complete eight hours of Board-approved continuing education each year, made up of a two-hour mandatory course and six elective hours, with up to four elective hours carried forward (G.S. 87-10.2)..
  10. 10Other. Letters of character reference required by 21 NCAC 12A .0303(a)(9) and .0308, certified copies of court records for any criminal convictions of the applicant or its qualifiers, and disclosure of disciplinary history with this or any other licensing agency..

Published fees on this path total $154, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Trade exam
  • Exam fee · $79

Surety bond

A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.

  • Surety bond · $175,000 · if applicable

Business registration

If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.

  • Business license

Liability insurance

Some states require proof of general liability or workers' compensation coverage at licensing time.

  • Insurance · if applicable

Continuing education

Renewals usually need approved CE hours, often on the latest NEC. Reciprocal licensees are rarely exempt.

  • Continuing education

How North Carolina licenses residential contractors

North Carolina residential contractor · “General Contractor, Residential classification (Limited, Intermediate or Unlimited)

Statewide license

Verified September 17, 2026· 5 sources

Issued by North Carolina Licensing Board for General Contractors

North Carolina licenses residential building contractors statewide through the North Carolina Licensing Board for General Contractors. A license is required for any single undertaking costing $40,000 or more, and the Residential classification covers construction and demolition of residential units built to the North Carolina Residential Building Code, together with the ancillary site work, driveways, sidewalks and water and wastewater systems and certain specialty work on those units. The license belongs to the business, not the person: it is issued to an individual, corporation, LLC or partnership and is qualified by a named qualifier, an owner, officer, member or responsible managing employee who personally passes the examination, so an inbound contractor applies as or for the entity that will sign contracts. Every license also carries a monetary limitation driven by financial responsibility rather than by skill: Limited allows single projects up to $750,000, Intermediate up to $1,500,000 and Unlimited has no project cap. North Carolina sets no minimum experience or apprenticeship hours, so out-of-state years do not shorten anything, and the Board says it does not have full reciprocity with any state; what it does have is examination waiver agreements with a short list of named states.

Moving to North CarolinaLeaving North Carolina

Why Oklahoma has nothing to transfer

Oklahoma residential contractor · “Residential building contractor license or registration (city-issued)

Licensed by cities and counties

Verified September 17, 2026· 14 sources

Issued by No state authority for building contractors; cities register residential builders

Oklahoma issues no statewide residential building, home builder or home improvement contractor license, and the Construction Industries Board says so on its own home page: "General Contractors are not currently required to have a state license in Oklahoma for general contracting. However, trade licenses/registrations are required for performing, or offering to perform, licensed/registered trade work. Further, local jurisdictions should be contacted for any local requirements." What the CIB does regulate is plumbing, electrical, mechanical, roofing, building and construction inspectors, and home inspectors. One of those is genuinely statewide for a residential contractor: roofing. Under the Roofing Contractor Registration Act, resident and non-resident roofing contractors alike must hold a CIB roofing contractor registration before they engage in or offer roofing services anywhere in Oklahoma, which costs $75, runs through a named qualifying party and needs at least $500,000 of liability insurance; failing to register is a misdemeanor. Everything else about housing is local. Oklahoma City registers a Building Contractor (Residential Only) for $100 on insurance alone, Edmond issues a separate residential building contractor license conditioned on current general liability and workers' compensation, and Broken Arrow registers general contractors on a $50,000 liability certificate. Tulsa and Norman license only the trades and leave the homebuilder to pull permits without a city contractor credential. None of these involves an exam, a bond, experience or a financial statement, and none of them gives credit for a license held in another state, so an inbound residential builder registers in each city where permits will be pulled, registers with the CIB if roofing is in scope, and makes sure any plumbing, electrical or mechanical work is performed under the right CIB license.

How local licensing works in Oklahoma

How local licensing works. Oklahoma has no state homebuilder or remodeler license, no state qualifying party for building work and no state reciprocity for it. Statewide residential and commercial building codes are adopted by the Oklahoma Uniform Building Code Commission and enforced by local building departments, so the contractor rules come from each city. Identify the city or county with jurisdiction over the address, register there, and expect to repeat the filing in the next jurisdiction. Two state obligations follow the contractor everywhere: a CIB roofing contractor registration for any roofing work, and a CIB plumbing, electrical or mechanical license for any of that work that is self-performed.

Roofing is the statewide exception. The Roofing Contractor Registration Act "creates a procedure whereby resident and nonresident roofing contractors are required to obtain a valid registration from the CIB in order to engage in or offer to engage in roofing-related services in the State of Oklahoma", and "failure to register is a misdemeanor punishable by a fine of up to $500.00." Registration is $75 initially and $75 to renew each year, and requires a general liability certificate of at least $500,000 naming the Construction Industries Board as certificate holder and specifically covering roofing work, proof of workers' compensation coverage or exemption, the business name registered with the Oklahoma Secretary of State, entity formation documents, and an affidavit of lawful presence. A qualifying party must be at least 18, must be an owner, officer, member or general partner, and must be "actively engaged in the work undertaken by the registrant." Registrations are non-transferable. A residential-only roofer stops there: "roofing contractors who do not perform commercial roofing contractor work and only perform residential roofing contractor work do not need to obtain a commercial endorsement."

Oklahoma City. Development Services registers contractors under Chapter 12 of the Municipal Code. The residential category is Building Contractor (Residential Only), defined as "any person contracting to make or provide any beneficial or valuable change or addition, betterment, enhancement, or amelioration of upon or to any new, proposed or existing structure on private property for which a building permit is required." The filing is a general liability certificate of at least $50,000 per occurrence, workers' compensation of at least $100,000 per occurrence or an Oklahoma Workers' Compensation Commission Affidavit of Exempt Status, an immigration affidavit where applicable, and a $100 registration fee. There is no bond, exam or experience requirement. Electrical, mechanical and plumbing contractors register separately and must show a current CIB state license first; boiler contractors must hold Oklahoma Department of Labor licensure. Development Services, 420 W. Main St., (405) 297-2525.

Tulsa. The Development Services Permit Center "permits all development within the city and registers the licenses of trade contractors", and the city's own guide states that "the State of Oklahoma licenses trade contractors (electrical, fire, mechanical, and plumbing) who must then register with the City of Tulsa." Registration is done on an Account Information and Contractor Registration form whose trade list includes Building, Mechanical, Plumbing, Electrical, commercial fire sprinkler, fire alarm, house moving, demolition, fire extinguisher and suppression systems, and sidewalk, driveway and paving cut work; the state control number field is marked "if applicable", and the account carries an undertaking to provide general liability insurance naming the City of Tulsa as an additional insured with 30 days' notice of cancellation. There is no exam, bond, experience or financial requirement on the form, and the city no longer registers journeymen, apprentices or sign and electrical sign contractors. Permits that require a contractor license must be applied for through the contractor's own portal login. A Residential Fast-Track Program gives one-business-day issuance of residential interior remodel permits for $500 plus the permit fees, by appointment. Permit Center, 175 E. 2nd Street, 4th Floor, (918) 596-9456.

Norman. The city licenses three things and a homebuilder is not one of them. Trade Contractor licenses for electrical, mechanical and plumbing require a current active CIB state license in hand and shown active on the CIB site, plus a driver's license or state ID; they renew annually on notices mailed in mid-February with a 31 March due date. A Sign Contractor license requires a $2,000 corporate surety bond or certificate of deposit on the city's own bond form, renewed annually. A Structure Moving license requires a casualty insurance certificate of at least $100,000 and proof of unified carrier registration or an intrastate license. A residential builder in Norman applies for permits through the online portal and carries no separate city contractor license. Development Services, (405) 366-5339.

Broken Arrow. The Community Permitting and Licensing Division handles residential and commercial building permits, sign permits, zoning cases and contractor registration through the Citizen Self Service portal. The city's General Contractor Registration form asks for four things and nothing else: a current general liability insurance certificate showing the business name and address, naming the City of Broken Arrow as certificate holder, with minimum $50,000 coverage; a current workers' compensation certificate or an Affidavit of Exemption; the City of Broken Arrow named as certificate holder on every certificate of insurance; and a copy of the contractor's driver's license. There is no exam, bond, experience requirement or state license prerequisite, and the form prints no fee, so confirm the current amount before filing. Community Development, P.O. Box 610, Broken Arrow, OK 74013, 918.259-8333, [email protected].

Edmond. Building & Fire Code Services is the one Oklahoma jurisdiction on this page that separates the two tiers explicitly. "Residential building contractors must maintain current general liability and workman's compensation for permit submittal", and a new residential building contractor license is opened by emailing the office the company name, mailing address, contact phone number, current general liability insurance, current workers' compensation and the portal email. A general building contractor license is a separate credential. Trade contractors "are required to hold active city and state licenses" and file their current CIB license and driver's license. Trade licenses expire on 31 July each year, renew from July through August through the portal, and lapse on 1 September if unpaid. No exam, bond or experience requirement is published for either building license. 22 E. Main Street, Edmond, (405) 359-4780.

Everywhere else. Smaller Oklahoma cities and rural counties vary from a full registration program to nothing beyond a building permit. Where a jurisdiction has not adopted a state-recognized code, does not require permits and employs no inspector, a contractor installing, modifying or altering plumbing, electrical or mechanical systems must file a Notification of Work Without Permit with the CIB instead.

Moving to OklahomaLeaving Oklahoma

Common questions

Do I have to take the North Carolina residential contractor exam if I'm licensed in Oklahoma?
Yes. North Carolina requires the trade exam on this path.
What does it cost to get a North Carolina residential contractor license from Oklahoma?
Published fees on this path total $154, not counting exam vendor fees or bonds.
Do my Oklahoma work hours count in North Carolina?
No. North Carolina does not credit out-of-state hours on this path.
Does it work the other way, from North Carolina to Oklahoma?
Not necessarily. Reciprocity is directed. Going from North Carolina to Oklahoma, the mechanism is not applicable.

Sources

  1. N.C.G.S. 87-10 - Application for license; examination; certificate; renewal · N.C.G.S. 87-10(a), (a1), (b), (c), (c1), (e) · North Carolina General Assembly · Statute · verified September 17, 2026
  2. Classifications and limitations - NC Licensing Board for General Contractors · North Carolina Licensing Board for General Contractors · Agency Page · verified September 17, 2026
  3. FAQ for Contractors - NC Licensing Board for General Contractors · North Carolina Licensing Board for General Contractors · Faq · verified September 17, 2026
  4. Laws and Regulations Applicable to General Contracting in the State of North Carolina (2026 edition) · 21 NCAC 12A .0202, .0204, .0303, .0304, .0402, .0403, .0404 · North Carolina Licensing Board for General Contractors · Admin Rule · verified September 17, 2026
  5. License applicants - NC Licensing Board for General Contractors · North Carolina Licensing Board for General Contractors · Agency Page · verified September 17, 2026
  6. Licensure Application Questions - License Type Selector (online application preview) · North Carolina Licensing Board for General Contractors · Form · verified September 17, 2026
  7. State of North Carolina Licensing Board for General Contractors - Candidate Information Bulletin · PSI Services LLC for the North Carolina Licensing Board for General Contractors · Other · verified September 17, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related