LicensebyState

Oklahoma to North Carolina: general contractor license reciprocity

No credit· Start overVerified September 17, 2026· 9 sources

Oklahoma does not issue a statewide general contractor license, so there is nothing to transfer. Here is North Carolina's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

NASCLA Accredited Examination in place of the North Carolina Building Contractor examination

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

North Carolina does not recognize an out-of-state general contractor license on its own, but it does accept the NASCLA Accredited Examination for Commercial General Building Contractors in place of its own Building Contractor trade examination. That route is open to anyone regardless of which state licensed them: sit the NASCLA examination before applying, then file the North Carolina application with the NASCLA pass letter and transcript purchase receipt attached and take the North Carolina Business and Law examination. Everything else still applies in full, including the financial responsibility figure for the limitation requested, the background check, character references and entity registration. An applicant who does not hold the NASCLA credential and comes from a state without a waiver agreement simply takes the North Carolina Building Contractor examination instead: 90 questions, 200 minutes, 70% to pass. North Carolina requires no trade experience for licensure, so out-of-state years do not shorten any step.

The Board confirms NASCLA acceptance on its own contractor FAQ and in 21 NCAC 12A .0303(c), which names the NASCLA examination alongside an origin state examination as the qualifying exam. The FAQ states acceptance for the Building classification; it does not say the NASCLA examination is accepted for the Residential classification. The NASCLA examination is bought and scheduled from NASCLA, not from the Board or PSI, and it is taken before the North Carolina application is filed. Without NASCLA and without a waiver agreement, substitute the North Carolina Building Contractor examination for the waived trade examination below; the Business and Law examination is then part of that classification examination rather than a separate sitting.

At a glance

Trade exam
Waived
Law / code exam
Required
Out-of-state hours
Do not count

What you must already have

  • You must have passed a licensing exam in Oklahoma that the destination considers comparable.NASCLA Accredited Examination for Commercial General Building Contractors, passed before the North Carolina application is filed. The Board asks for the NASCLA pass letter and the transcript purchase receipt to be attached to the application.
  • The qualifier is at least 18 years old and possesses good moral character as determined by the Board (G.S. 87-10). North Carolina sets no minimum trade experience or apprenticeship hours for a general contractor license.

What you'll do to get licensed in North Carolina

  1. 1Law / code exam. Pass a law, rules, or code exam. North Carolina Business and Law examination: 40 questions, 90 minutes, 70% to pass, covering erosion and sedimentation control, licensing, liens, contracts, project management, safety and business practices. Required of applicants who qualify on the NASCLA examination rather than the North Carolina Building Contractor examination..
  2. 2Trade exam. Pass the destination's trade exam (if applicable). Not required if the NASCLA Accredited Examination has been passed. Otherwise the North Carolina Building Contractor examination applies: 90 questions, 200 minutes, 70% to pass, open book, administered by PSI Services LLC after the Board issues an eligibility letter..
  3. 3Application fee. Pay the application fee ($75). Nonrefundable application fee set by the limitation requested: $75 for a limited license, $100 for an intermediate license and $125 for an unlimited license (G.S. 87-10(a1); 21 NCAC 12A .0304(a)). The amount shown is the limited-license fee..
  4. 4Exam fee. Pay the exam fee ($79). $79 per examination, paid to PSI Services LLC when the examination is scheduled. The NASCLA examination itself is bought from NASCLA and is not covered by this fee..
  5. 5Financial responsibility. Show financial responsibility of at least $17,000. Evidence of financial responsibility for the entity that will hold the license. Current assets must exceed current liabilities by at least $17,000 for a limited license (or total net worth of at least $80,000), $75,000 for an intermediate license, or $150,000 for an unlimited license. Intermediate and unlimited applicants must show the figure in an agreed-upon procedures report on the Board form or an audited financial statement prepared by a CPA or independent accountant. Statements must be no more than twelve months old and conform to GAAP (21 NCAC 12A .0204). The amount shown is the limited-license working capital figure..
  6. 6Surety bond. Post a surety bond ($175,000) (if applicable). Optional alternative to the working capital or net worth figure: a continuous surety bond of $175,000 for a limited license, $500,000 for an intermediate license or $1,000,000 for an unlimited license, from a surety authorized in North Carolina and rated Superior or Excellent by A.M. Best. Proof is filed with the application and with every annual renewal, and the bond must stay in force until the licensee can show the required working capital (21 NCAC 12A .0204(e))..
  7. 7Background check. Complete a background check. Criminal background check through the third-party vendor the Board names, paid directly to the vendor. Every qualifier submits to the check, along with the sole proprietor, the president of a corporation, all managers and members of an LLC, or all partners of a partnership (21 NCAC 12A .0303(b))..
  8. 8Business license. Obtain a business license. The license is issued to a legal entity, so the individual, corporation, LLC or partnership that will contract must be formed and, if organized outside North Carolina, authorized to transact business in the State before the license is issued (G.S. 87-10.1)..
  9. 9Insurance. Carry the required insurance (if applicable). The Board states there is no insurance or bonding requirement for a general contractor license itself. North Carolina workers compensation law still applies to the business independently of licensure, and owners, lenders and general contractors commonly require general liability coverage by contract..
  10. 10Continuing education. Complete continuing education. Renewal condition rather than an entry requirement: at least one qualifier on a building, residential or unclassified license must complete eight hours of Board-approved continuing education each year, made up of a two-hour mandatory course and six elective hours, with up to four elective hours carried forward (G.S. 87-10.2)..
  11. 11Other. Letters of character reference required by 21 NCAC 12A .0303(a)(9) and .0308, certified copies of court records for any criminal convictions of the applicant or its qualifiers, and disclosure of disciplinary history with this or any other licensing agency..

Published fees on this path total $154, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Law / code exam
  • Trade exam · if applicable
  • Exam fee · $79

Surety bond

A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.

  • Surety bond · $175,000 · if applicable

Business registration

If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.

  • Business license

Liability insurance

Some states require proof of general liability or workers' compensation coverage at licensing time.

  • Insurance · if applicable

Continuing education

Renewals usually need approved CE hours, often on the latest NEC. Reciprocal licensees are rarely exempt.

  • Continuing education

How North Carolina licenses general contractors

North Carolina general contractor · “General Contractor, Building classification (Limited, Intermediate or Unlimited)

Statewide license

Verified September 17, 2026· 6 sources

Issued by North Carolina Licensing Board for General Contractors

The unlimited tier in North Carolina is the Building classification of the General Contractor license, issued by the North Carolina Licensing Board for General Contractors and required for any single undertaking costing $40,000 or more. The Building classification covers all building construction and demolition, commercial, industrial, institutional and residential alike, plus parking decks, site work and paving, storm drainage, retaining walls, recreational facilities and a list of specialty categories including concrete, masonry, roofing, metal erection, interior construction, swimming pools and asbestos. The Board also issues Highway, Public Utilities and Specialty classifications for work outside building construction, and separate North Carolina boards license the electrical, plumbing, heating and fire sprinkler trades. As with every classification, the license is held by a business and qualified by a named individual who passes the examination, and it carries a monetary limitation: Limited up to $750,000 per project, Intermediate up to $1,500,000, and Unlimited with no project cap, each set by the working capital, net worth or surety bond the applicant can show. North Carolina accepts the NASCLA Accredited Examination for this classification, and it holds examination waiver agreements with a short list of named states, but the Board states it does not have full reciprocity with any state.

Moving to North CarolinaLeaving North Carolina

Why Oklahoma has nothing to transfer

Oklahoma general contractor · “General or commercial building contractor license or registration (city-issued)

Licensed by cities and counties

Verified September 17, 2026· 14 sources

Issued by No state authority for building contractors; cities register general and commercial builders

Oklahoma has no statewide general, commercial or unlimited building contractor license, and the Construction Industries Board publishes that finding itself: "General Contractors are not currently required to have a state license in Oklahoma for general contracting", with the rider that trade licenses and registrations are still required for licensed trade work and that local jurisdictions should be contacted for local requirements. The CIB regulates plumbing, electrical, mechanical, roofing, building and construction inspectors, and home inspectors, and nothing else; the Oklahoma Uniform Building Code Commission adopts the statewide building codes that local departments enforce. The one statewide credential a general contractor may still need in its own right is the CIB roofing contractor registration, which reaches resident and non-resident contractors alike and carries a commercial endorsement with a PSI examination, a $230 initial fee and $1,000,000 of liability insurance for commercial roofing. Commercial building itself is a city matter and the requirements are administrative. Edmond states that "a general building contractor's license is required for permit submittal" and issues one on an email filing, Broken Arrow registers general contractors on a $50,000 liability certificate and a workers' compensation filing, and Tulsa registers contractor accounts by trade with an insurance undertaking. Oklahoma City is the notable gap: its only building category is Building Contractor (Residential Only), so a commercial builder there registers no general credential at all, and Norman licenses only trade, sign and structure moving contractors. None of these carries a trade or business-law exam, a bond, a qualifying party or a financial statement, and there is no NASCLA route because Oklahoma has no state board to accept one.

How local licensing works in Oklahoma

How local licensing works. No Oklahoma agency licenses general or commercial building contractors, so there is no state application to file, no state qualifying party and no state examination. The Construction Industries Board's own FAQ puts it plainly - "General Contractors are not currently required to have a state license in Oklahoma" - and directs contractors to check "the jurisdiction in which you are interested in performing construction related work", noting that other agencies such as the Corporation Commission, the Oklahoma Department of Labor and the Oklahoma Liquefied Petroleum Gas Board license other construction-related areas. Statewide commercial and residential building codes come from the Oklahoma Uniform Building Code Commission and are enforced locally.

Roofing, and only roofing, is a statewide registration. A commercial builder self-performing roofing needs a CIB roofing contractor registration plus a commercial endorsement. The registration is $75 initially and annually, needs at least $500,000 of general liability insurance naming the board as certificate holder, workers' compensation coverage or exemption, Secretary of State business-name registration, entity documents and an affidavit of lawful presence, and runs through a qualifying party who is an owner, officer, member or general partner actively engaged in the work. The commercial endorsement costs $230 initially and $100 to renew, requires a roofing registration in good standing first, raises the liability minimum to $1,000,000, and requires a PSI examination once the application is approved. Commercial roofers also complete four hours of approved continuing education every 36 months. Registration is non-transferable and applies to non-resident contractors as much as to Oklahoma firms.

Oklahoma City. There is no general or commercial building registration. The city's contractor registration categories are Boiler, Building Contractor (Residential Only), Electrical, Fence, House Moving, Insulation, Mechanical, Plumbing, Prequalified Contractor and Sidewalk Contractor (both through Public Works), and Sign. A commercial builder pulls permits without a city contractor credential, while the electrical, mechanical and plumbing scope goes to contractors registered on current CIB state licenses and boiler work to a contractor licensed by the Oklahoma Department of Labor. Prequalification through Public Works is a procurement matter for city contracts rather than a building credential. Development Services, 420 W. Main St., (405) 297-2525.

Tulsa. The Permit Center "registers the licenses of trade contractors" and issues trade permits; the city's guide to doing business states that "in Oklahoma there is no general license required to start or own a business or to operate as a general contractor" and that the state-licensed trades - electrical, fire, mechanical and plumbing - "must then register with the City of Tulsa." Registration is an account filing on the Account Information and Contractor Registration form, whose trade checkboxes include Building alongside the state-licensed trades, demolition, house moving, fire protection systems, and sidewalk, driveway and paving cut work; the last of those "requires an Annual Contractor's Contract with City of Tulsa." The state control number is requested only "if applicable", and the substantive undertaking is to carry general liability insurance naming the City of Tulsa as an additional insured with 30 days' written notice of cancellation. Stationary engineers are the one credential Tulsa tests itself, on a certificate of competency. Pre-development meetings cost $350 for the Infrastructure Development Process route and $350 for the Code Compliance route, each credited against later fees. Permit Center, 175 E. 2nd Street, 4th Floor, (918) 596-9456; fee ordinance Title 49.

Norman. Norman licenses trade contractors, sign contractors and structure movers and nothing else. A Trade Contractor license for electrical, mechanical or plumbing work requires a current active CIB state license, shown active on the CIB website, plus photo ID, renewed annually by 31 March. A Sign Contractor license requires a $2,000 surety bond or certificate of deposit on the city's bond form. A Structure Moving license requires casualty insurance of at least $100,000 and proof of unified carrier registration or an intrastate license. There is no general or commercial building contractor license, so a commercial builder works through the online permitting portal and the licensed trades. Development Services, (405) 366-5339.

Broken Arrow. The Community Permitting and Licensing Division issues residential and commercial building permits and registers contractors through the Citizen Self Service portal. The General Contractor Registration form requires only a current general liability insurance certificate with the business name and address, the City of Broken Arrow named as certificate holder and minimum $50,000 coverage; a current workers' compensation certificate or an Affidavit of Exemption from the Oklahoma Workers' Compensation Commission; the city named as certificate holder on every certificate; and a copy of the contractor's driver's license. No exam, bond, experience or state license is required, and no fee is printed on the form, so confirm the amount with the division. 220 S. First Street, 918-259-2400 ext. 2359.

Edmond. Building & Fire Code Services states that "a general building contractor's license is required for permit submittal" and opens a new one on an email giving the company name, mailing address, contact phone number and portal email. Residential building contractors hold a separate license and "must maintain current general liability and workman's compensation for permit submittal." Trade contractors "are required to hold active city and state licenses" and file their CIB license and driver's license; trade licenses expire 31 July, renew through the portal from July through August, and lapse on 1 September if unpaid. No exam, bond, experience requirement or fee is published for the general building license, so confirm what is payable before submitting. 22 E. Main Street, Edmond, (405) 359-4780, permits.edmondok.gov.

What does and does not travel. An out-of-state general contractor license, a NASCLA Accredited Examination and out-of-state project experience carry no weight anywhere in Oklahoma, because no Oklahoma authority tests or qualifies commercial builders and Oklahoma is not a NASCLA participating state. What does travel is the CIB credential set: the roofing contractor registration, which the Roofing Contractor Registration Act applies to non-resident contractors by name, and the plumbing, electrical and mechanical licenses that several of the cities above demand before they will register a trade contractor. Those routes, including the board's published arrangements with other states, belong on this site's plumbing, electrical and HVAC pages rather than here.

Moving to OklahomaLeaving Oklahoma

Common questions

Do I have to take the North Carolina general contractor exam if I'm licensed in Oklahoma?
The trade exam is waived, but North Carolina requires a law or code exam.
What does it cost to get a North Carolina general contractor license from Oklahoma?
Published fees on this path total $154, not counting exam vendor fees or bonds.
Do my Oklahoma work hours count in North Carolina?
No. North Carolina does not credit out-of-state hours on this path.
Does it work the other way, from North Carolina to Oklahoma?
Not necessarily. Reciprocity is directed. Going from North Carolina to Oklahoma, the mechanism is not applicable.

Sources

  1. NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
  2. N.C.G.S. 87-10 - Application for license; examination; certificate; renewal · N.C.G.S. 87-10(a), (a1), (b), (c), (c1), (e) · North Carolina General Assembly · Statute · verified September 17, 2026
  3. N.C.G.S. 87-15.1 - Reciprocity of licensing · N.C.G.S. 87-15.1 · North Carolina General Assembly · Statute · verified September 17, 2026
  4. Classifications and limitations - NC Licensing Board for General Contractors · North Carolina Licensing Board for General Contractors · Agency Page · verified September 17, 2026
  5. FAQ for Contractors - NC Licensing Board for General Contractors · North Carolina Licensing Board for General Contractors · Faq · verified September 17, 2026
  6. Laws and Regulations Applicable to General Contracting in the State of North Carolina (2026 edition) · 21 NCAC 12A .0202, .0204, .0303, .0304, .0402, .0403, .0404 · North Carolina Licensing Board for General Contractors · Admin Rule · verified September 17, 2026
  7. License applicants - NC Licensing Board for General Contractors · North Carolina Licensing Board for General Contractors · Agency Page · verified September 17, 2026
  8. Licensure Application Questions - License Type Selector (online application preview) · North Carolina Licensing Board for General Contractors · Form · verified September 17, 2026
  9. State of North Carolina Licensing Board for General Contractors - Candidate Information Bulletin · PSI Services LLC for the North Carolina Licensing Board for General Contractors · Other · verified September 17, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related