LicensebyState

South Dakota to Virginia: residential contractor license reciprocity

No credit· Start overVerified September 17, 2026· 16 sources

South Dakota does not issue a statewide residential contractor license, so there is nothing to transfer. Here is Virginia's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

Out-of-state residential builders: experience transfers, the RBC exam does not

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

Virginia has no general reciprocity or license-recognition route into the contractor license for residential builders arriving from a state other than North Carolina or Ohio, so the firm applies as a new applicant. What does transfer is experience: the application asks for every contractor license, certification and registration the business, its qualified individual, its designated employee and its responsible management hold outside Virginia, and the Board will review a current out-of-state license as proof of the one, three or five years of residential building experience its class requires. To have it counted, the out-of-state board must supply a Certification or Letter of Good Standing giving the license number, the initial date of licensure, the expiration date, how the license was obtained (examination, reciprocity and so on) and any closed disciplinary actions. The qualified individual still sits the Virginia RBC technical examination with PSI after the Board pre-approves the Experience Verification Form, a Class A or Class B firm's designated employee still sits the business examination, and the eight-hour pre-license education course is still required. The Board's universal license recognition program covers Virginia's individual tradesman and other personal credentials, not the Class A, B or C contractor license, so it is not a route to this license.

The class letter is about contract value, not about houses versus commercial work: a residential builder can hold any of Class A, B or C with the RBC classification, and the fees, net worth and experience figures below change with the class. Virginia also requires the firm to register with the State Corporation Commission and to comply with the local license requirements of every county, city and town where it works. The Board's agreement list also carries an Ohio entry, pairing Ohio's Business and Law examination with Virginia's Advanced and General law examinations, but on the Board's own agreements document that sentence belongs to the Ohio master electrician entry and the arrangement is an electrical one; it does not reach the Class A, B or C building classifications, and Ohio does not license residential or general building contractors at the state level in any case. The Board publishes only the existence of its agreements, not their terms; call (804) 367-8511 or email [email protected] before assuming an out-of-state credential will be accepted.

At a glance

Trade exam
Required
Law / code exam
Required
Out-of-state hours
Count toward eligibility
Typical processing
About 30 days

What you must already have

  • The qualified individual must have one year (Class C), three years (Class B) or five years (Class A) of experience in residential building contracting; experience earned in another state counts18VAC50-22-40, -50 and -60 set the ladder by license class; the Board pre-approves the Experience Verification Form before the qualified individual may sit the RBC technical examination.
  • Your South Dakota license must be active and in good standing.Certification or Letter of Good Standing showing license number, initial date of licensure, expiration date, means of obtaining licensure and all closed disciplinary actions.
  • You must have no disciplinary action or unresolved complaints on your record.

What you'll do to get licensed in Virginia

  1. 1Application fee. Pay the application fee ($274.50). Class C initial license fee on the current application form, which combines the $235 fee in 18VAC50-22-100, the $25 Contractor Transaction Recovery Fund assessment and the technology fee of $7.25 per year. The same form charges $419.50 for Class B and $439.50 for Class A. Fees are not refundable..
  2. 2Financial responsibility. Show financial responsibility of at least $15,000 (if applicable). Class B applicants must document at least $15,000 of net worth or equity and Class A applicants at least $45,000, using the Board's Financial Statement Form with supporting documentation, a CPA-reviewed financial statement or a CPA audit. Class C has no financial requirement..
  3. 3Surety bond. Post a surety bond ($50,000) (if applicable). A $50,000 surety bond on the Board's Surety Bond Form may be filed instead of the net worth documentation for a Class A or Class B license..
  4. 4Trade exam. Pass the destination's trade exam. Virginia Residential Building (RBC) technical examination for the qualified individual, administered by PSI after the Board pre-approves the application and Experience Verification Form..
  5. 5Law / code exam. Pass a law, rules, or code exam. PSI contractor business examination for the designated employee of a Class A or Class B firm: the General and Virginia portions for Class B, and the Advanced, General and Virginia portions for Class A. Class C licenses have no designated employee and no business examination..
  6. 6Exam fee. Pay the exam fee ($85). Paid directly to PSI: $85 for a qualified individual specialty examination such as RBC, and for the designated employee's business examination $40 for one portion, $72 for two or $85 for three. Examination fees are set by the Board's vendor contract and may not exceed $200 per element..
  7. 7Other. Eight hours of Board-approved pre-license education, completed by the designated employee or a member of responsible management for Class A and Class B, or by a member of responsible management for Class C. The Board approves the courses but providers set their own prices..
  8. 8Other. Certification or Letter of Good Standing from each out-of-state board, prepared by that board, if an out-of-state license is being submitted for experience credit or under an examination agreement. (if applicable).
  9. 9Business license. Obtain a business license. Registration of the business entity with the Virginia State Corporation Commission, including out-of-state businesses, plus compliance with the business license requirements of every county, city and town where the firm performs work..
  10. 10Background check. Complete a background check (if applicable). An original criminal history record dated within 90 days is required from each jurisdiction where any person listed on the application has a felony conviction, or a non-marijuana misdemeanor conviction within the last three years..
  11. 11License fee. Pay the license or certificate fee ($250). Class C renewal every two years: the $220 renewal fee in 18VAC50-22-140 plus the $30 Recovery Fund assessment. Class B renewal is $260 and Class A $270, each plus the $30 assessment. Licenses expire two years from the last day of the month in which they were issued..

Published fees on this path total $609.50, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Surety bond

A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.

  • Surety bond · $50,000 · if applicable

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Trade exam
  • Law / code exam

Continuing education

Renewals usually need approved CE hours, often on the latest NEC. Reciprocal licensees are rarely exempt.

  • Other

Business registration

If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.

  • Business license

How Virginia licenses residential contractors

Virginia residential contractor · “Class A, B or C Contractor, Residential Building (RBC)

Statewide license

Verified September 17, 2026· 11 sources

Issued by Virginia Board for Contractors (DPOR)

Virginia licenses contractors through the Board for Contractors at the Department of Professional and Occupational Regulation, and the license is issued to a business entity rather than to a person. Every license carries two separate things: a class (A, B or C) that sets the dollar limit on the work, and one or more classifications or specialty designations that set the type of work. Class C covers a single contract or project over $1,000 but under $30,000 and under $250,000 of work in any 12 months; Class B covers $30,000 to under $150,000 per project and $250,000 to under $1 million a year, and requires $15,000 of documented net worth or equity; Class A has no monetary ceiling and requires $45,000 of net worth or equity. A $50,000 surety bond on the Board's form may be filed instead of the financial statement, and Class C has no financial requirement at all. Homes-only work is the Residential Building (RBC) classification, which covers dwellings and townhouses and their accessory structures and folds in concrete, home improvement, masonry, painting, roofing, landscape and swimming pool work on those properties, but never electrical, plumbing, HVAC or gas fitting and never commercial buildings; smaller repair and remodeling firms may instead take the Home Improvement (HIC) specialty. The firm names a qualified individual for each designation, who must have one year (Class C), three years (Class B) or five years (Class A) of experience in that work and must pass the Board's RBC technical examination, and Class A and Class B firms also name a designated employee who passes the PSI business examination. All classes need eight hours of Board-approved pre-license education, and licenses run two years from the last day of the month of issuance.

Moving to VirginiaLeaving Virginia

Why South Dakota has nothing to transfer

South Dakota residential contractor

Licensed by cities and counties

Verified September 17, 2026· 11 sources

South Dakota issues no state residential contractor, home builder or remodeler license, and no state board examines or qualifies people who build houses. The Department of Labor and Regulation's list of occupational licensing agencies contains an Electrical Commission, a Plumbing Commission and a Board of Technical Professions for architects and engineers, and no contractor board of any kind, so a builder who self-performs electrical or plumbing work needs the matching state license and everything else is local. Cities decide who may build houses inside their limits, and the four largest programs are quite different from one another: Sioux Falls requires a Residential Building Contractor's license with its own written examination, a $20,000 compliance bond and $300,000 of liability insurance; Rapid City issues a Class B residential contractor license on a city examination; Aberdeen licenses residential contractors after an open-book examination and a City Council vote; Brookings issues an annual residential contractor license on insurance and a $75 fee with no examination at all. Separately from any of that, every contractor working anywhere in South Dakota must hold a contractor's excise tax license from the Department of Revenue before starting work, which is free and is a tax registration rather than a test of skill. A builder moving to South Dakota therefore has no state license to transfer and no state reciprocity to apply for: the work is registering for the excise tax license and then qualifying city by city, and only Aberdeen offers any credit for a license held elsewhere.

How local licensing works in South Dakota

How it works in South Dakota. There is no state contractor license, no state application and no state examination, so nothing carries automatically from one South Dakota city to the next, let alone from another state. What every contractor does need before starting work anywhere in the state is a contractor's excise tax license from the Department of Revenue: 'an individual must be licensed before starting work in South Dakota' and 'all contractors must be licensed regardless of the amount of the receipts they have or the amount of tax due.' There is no fee for it, the excise tax itself is 2% of a prime contractor's gross receipts, and three of the four cities below want to see a copy of the license card before they will issue a city license. Get that first, then take each city in turn.

Sioux Falls. Building Services 'requires a Residential Building Contractor's License of all contractors doing work on residential 1- & 2-family dwellings and townhomes within the city limits', and the examples it gives run from sheds, decks, shingles and sheetrock to basement finishing and new construction. The license is held through a named Construction Supervisor, who must first pass the Construction Supervisor Examination: a timed open-book test on the City of Sioux Falls Residential Code Handbook, offered monthly, 50 questions, 'You must get 80% or higher to pass the test, therefore a maximum of 10 of the 50 questions may be incorrect.' The examination fee is $75.00 and the handbook is $10.00. 'Upon application the Construction Supervisor must submit a $20,000 Compliance Bond, a minimum of $300,000 general liability insurance and the appropriate license fees within 90 days of examination.' Licenses run three years, one hour of continuing education is required in each cycle, and a license expired more than twelve months means sitting the examination again unless an inactive license was maintained. On out-of-state credentials the city is blunt: 'No, the city of Sioux Falls does not reciprocate any licenses. You will still need to take and pass examination before applying for the license.' The city does not print the license fee itself on the page, so ask licensing on 605-367-8672 what to send with the bond and the certificate. Sioux Falls also issues a separate Residential Roofing & Repair Contractor license and separate electrical, mechanical, plumbing, fireplace, refrigeration, irrigation, right-of-way and sign licenses.

Rapid City. Building Services licenses a Class B contractor 'for construction of detached single-family houses, attached single family houses and two-family dwellings', on a city-administered open-book examination based on the 2018 International Residential Code and the Rapid City amendments, 54 multiple choice questions in three hours, sat at City Hall. The license costs $200 initially and $100 to renew, runs three years and carries six hours of continuing education per period. Every applicant files a certificate of insurance naming the City of Rapid City as certificate holder and nothing else is accepted, with minimum general aggregate liability of $1,000,000, $300,000 fire damage and $1,000,000 each occurrence, plus a workers' compensation certificate or a signed statement of non-participation for an owner or partnership with no employees. A copy of the state excise tax certificate goes in the packet. Roofing is a separate Class R license, also $200 for three years, on a 12-question examination. A licensee who misses renewal has a one-year grace period, after which the license lapses and the examination must be taken again. Building Services is on (605) 394-4120.

Aberdeen. The city is explicit that location makes no difference to whether you need its license: 'Whether you are based in the City of Aberdeen itself, a different city within South Dakota, or you are based out of a completely different state all together, you must be licensed through the City of Aberdeen.' The examination is 50 questions, open book, two hours, with a passing score of 70%, studied from The Contractors Handbook at $15, and '$35 fee will be charged every time an exam is attempted or passed.' Aberdeen is the one place in the state that gives any weight to a license held elsewhere: 'the examination requirement may be waived if proof of prior licensing from recognized jurisdictions is approved by the City of Aberdeen's Building Official.' No jurisdiction is named on the handout, so bring the license and the licensing authority's own documentation and ask the Building Official first. After passing or being waived, the applicant files a $200 first-time fee covering three years, proof of liability insurance, proof of workers' compensation insurance if applicable, and a copy of the excise tax license, and is then approved by the City Council, which meets Monday evenings; paperwork is due by noon the previous Wednesday and permits may be drawn only after the vote. Renewal is $150 every three years. Building Inspection is at City Hall, 123 South Lincoln Street, 3rd Floor, 605-626-7017.

Brookings. Community Development issues a residential contractor license on paperwork alone. The requirements are the application, a $75 fee, an excise tax number, a copy of workers' compensation insurance and 'a copy of current General Commercial Liability Insurance Certificate stating the sum of not less than $500,000 for each occurrence.' There is no examination and no bond. The license year is the calendar year, January 1 to December 31, and it 'must be renewed in order to continue any current project or prior to starting any new project'; a contractor with a job in progress who lets it expire pays double the fee. The license is neither refundable nor transferable. Building permits are required in the city and on nonagricultural land in the joint jurisdictional area roughly three miles out. Community Development is at 520 3rd Street, Suite 140, (605) 692-6629.

Everywhere else. Smaller South Dakota cities set their own rules and many require only a permit and proof of insurance. Ask the building official in each city you intend to work in, and remember that the excise tax license is required statewide whether or not the city licenses anybody.

Moving to South DakotaLeaving South Dakota

Common questions

Do I have to take the Virginia residential contractor exam if I'm licensed in South Dakota?
Yes. Virginia requires the trade exam on this path, plus a law or code exam.
What does it cost to get a Virginia residential contractor license from South Dakota?
Published fees on this path total $609.50, not counting exam vendor fees or bonds.
Do my South Dakota work hours count in Virginia?
Yes. Documented out-of-state experience counts toward Virginia's eligibility requirements.
How long does the application take?
The board's published or typical processing time is about 30 days.
Does it work the other way, from Virginia to South Dakota?
Not necessarily. Reciprocity is directed. Going from Virginia to South Dakota, the mechanism is not applicable.

Sources

  1. 18VAC50-22-100 - Fees · 18VAC50-22-100; Va. Code § 54.1-1119 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
  2. 18VAC50-22-110 - Renewal required · 18VAC50-22-110 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
  3. 18VAC50-22-140 - Renewal fees · 18VAC50-22-140 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
  4. 18VAC50-22-20 - Definitions of license classifications · 18VAC50-22-20 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
  5. 18VAC50-22-30 - Definitions of specialty services · 18VAC50-22-30 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
  6. 18VAC50-22-40 - Requirements for a Class C license · 18VAC50-22-40 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
  7. 18VAC50-22-50 - Requirements for a Class B license · 18VAC50-22-50 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
  8. 18VAC50-22-60 - Requirements for a Class A license · 18VAC50-22-60 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
  9. 18VAC50-22-70 - Qualifications for licensure by reciprocity or substantial equivalency · 18VAC50-22-70 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
  10. 18VAC50-22-80 - Examination fees · 18VAC50-22-80 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
  11. Va. Code 54.1-1100 - Definitions (Class A, Class B and Class C contractors) · Va. Code § 54.1-1100 · Virginia General Assembly (LIS) · Statute · verified September 17, 2026
  12. Form A501-27LIC - Contractor Licensing Information and Application Instructions (v18, 08/01/2026) · Virginia Board for Contractors (DPOR) · Form · verified September 17, 2026
  13. Form A501-27EXINFO - Board for Contractors, Requirements for Qualified Individuals (v10, 09/01/2025) · Virginia Board for Contractors (DPOR) · Form · verified September 17, 2026
  14. DPOR Board for Contractors - program page (licensing, education and exams, reciprocal agreements) · Virginia Department of Professional and Occupational Regulation · Agency Page · verified September 17, 2026
  15. Virginia Board for Contractors - Reciprocal Licensing/Examination Agreements with Other Jurisdictions · Virginia Board for Contractors (DPOR) · Agreement Document · verified September 17, 2026
  16. DPOR - Universal License Recognition · Va. Code 54.1-204, 54.1-205 · Virginia Department of Professional and Occupational Regulation · Agency Page · verified September 17, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related