LicensebyState

Texas to Iowa: residential contractor license reciprocity

No credit· Start overVerified September 17, 2026· 10 sources

Texas does not issue a statewide residential contractor license, so there is nothing to transfer. Here is Iowa's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

Everyone registers the same way; an out-of-state contractor license transfers nothing

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

A residential contractor licensed in another state registers in Iowa exactly as a first-time applicant does, and holding that license neither helps nor hinders the application. DIAL does not review, verify or credit out-of-state credentials for contractor registration, and it has nothing to waive: Iowa's contractor registration law and its rules impose no examination, no experience requirement and no competency test, and neither the statute, the rules nor the application asks about another state's license. Iowa also does not participate in the NASCLA Accredited Examination program, because it holds no contractor examination for that examination to replace. Coming from out of state changes only one thing, and it costs money rather than saving it: a contractor whose principal place of business is in another state must file a continuous $25,000 surety bond on DIAL's own bond form, issued by a surety licensed in Iowa, or show that the Iowa Department of Transportation has prequalified the business to bid on its projects. Opening a branch office in Iowa does not avoid the bond, and subcontractors are not covered by the general contractor's registration or bond - each files its own. The rest of the route is the same for everyone: obtain an Iowa unemployment insurance employer account number, file the workers' compensation certificate naming DIAL as certificate holder or a statement that coverage is not required, complete the application online or on paper, and pay $50 for one year or $150 for three.

The 30-day figure is the rule's own deadline: 481 IAC 465.7 gives the director 30 days from receipt of a completed application to issue the number, and the department's own guidance repeats that processing can take up to 30 days and that a contractor 'is not registered until a contractor registration number is issued.' Registration numbers are the letter C followed by six digits and are published in DIAL's public contractor lookup. The seven factors in 481 IAC 465.2 decide whether a business counts as out-of-state for bonding: where the home office is shown on government filings, where payroll is prepared, where business is transacted, where the officers or owners live and work, where the bank accounts are, where fixed business property is, and where management decisions are made. Contractor Registration can be reached on 515.242.5871 or at [email protected], DIAL, 6200 Park Avenue, Suite 100, Des Moines, IA 50321.

At a glance

Trade exam
Waived
Law / code exam
Not required
Out-of-state hours
Do not count
Typical processing
About 30 days

What you must already have

  • Registration is required of anyone who earns at least $2,000 a year from construction work in Iowa. A person who earns less than that, or who works only on their own real estate or property, is not a contractor under the law and does not register.Iowa Code 91C.1(1)(a) and 481 IAC 465.1. The definition of construction is adopted from 871 IAC 23.82(96) and is deliberately wide: it covers single-family housing construction, building alterations, land subdivision and development, remodeling, demolition and every special trade, and the department describes it as more than 400 categories.
  • Each construction business with its own federal identification number registers separately, a joint venture registers as an independent entity, and subcontractors are not covered by the general contractor's registration. Changing business form, for example from a sole proprietorship to a corporation, requires a new registration rather than an amendment.481 IAC 465.3, 465.4 and 465.5(3). Any other change in the information on file must be reported to DIAL within 15 working days, and changes to workers' compensation coverage within ten days before the change takes effect.
  • Iowa asks for no trade experience, apprenticeship hours, education, references or examination result, so documented years of homebuilding in another state neither shorten nor replace any step of registration.The complete application is listed at 481 IAC 465.4 and the complete conditions of registration at Iowa Code 91C.2. Neither includes a qualification of any kind.

What you'll do to get licensed in Iowa

  1. 1Application fee. Pay the application fee ($50). Contractor registration fee: $50 per year, or $150 for a three-year registration. The fee is not refundable. A self-employed contractor who does not pay more than $2,000 a year to employ other people and does not work with or for other contractors in the same phase of construction is exempt from the fee and files a fee exemption form instead, but still registers and must file a new exemption form at each renewal. Registration is renewed every year; DIAL sends a renewal form by mail or email the month before expiry, and a contractor who renews on time keeps the same registration number. Credit card and ACH payments are not accepted over the phone..
  2. 2Surety bond. Post a surety bond ($25,000). Out-of-state contractor bond: a $25,000 surety bond, on DIAL's own bond form, from a surety company licensed to do business in Iowa, required of every contractor whose principal place of business is in another state. Keeping a branch office in Iowa does not avoid it, and subcontractors must post their own. The bond runs to the State of Iowa, is continuous until the surety cancels it on at least 30 days' written notice, and runs concurrently with the annual registration term. It guarantees payment of taxes, unemployment compensation contributions, penalties, interest and related fees owed to the state, and only the State of Iowa and its agencies may claim against it. In place of the bond, a contractor may file a letter showing that the Iowa Department of Transportation has prequalified it to bid on department projects. When work in Iowa ends, the surety asks DIAL in writing to release the bond..
  3. 3Insurance. Carry the required insurance. Workers' compensation: a certificate of insurance from the carrier showing coverage and its effective dates and naming the Department of Inspections, Appeals, and Licensing as certificate holder. A self-insured employer files the commissioner of insurance's release under Iowa Code 87.11 instead, and a contractor with no employees files a statement that it is not required to carry coverage. The insurer must notify DIAL when a policy is cancelled, and the contractor must notify DIAL ten days before any change in coverage. Losing coverage is grounds for revoking the registration..
  4. 4Business license. Obtain a business license. An Iowa unemployment insurance employer account number issued by the unemployment insurance services division of Iowa Workforce Development, obtained before applying. Every contractor needs one, in state or out of state, even with no employees. The application also requires a federal employer identification number for a business entity, or the owner's Social Security number for a sole proprietor, and the business's NAICS code or a description of its principal products and services..
  5. 5Other. The registration application itself, filed online through DIAL's contractor registration portal or on the department's paper form, giving the business name, the mailing address of the principal place of business, the business telephone number, the type of entity, and the name, address, telephone number and position of every corporate officer or of each owner. DIAL issues a registration number within 30 days of a complete application, and no construction work may be performed in Iowa before the number is issued..
  6. 6Other. Separate trade licensing where the work calls for it. Contractor registration does not authorize plumbing, mechanical, HVAC, refrigeration, sheet metal or hydronic work: those require a contractor license from the Iowa Plumbing and Mechanical Systems Board under Iowa Code chapter 105, applied for on a joint application that produces both the license and the contractor registration number, so a licensed plumbing or mechanical business does not file a separate registration application. Electrical work requires a license from the Iowa Electrical Examining Board under chapter 103. Asbestos, lead-based paint, elevator, boiler and alarm and fire protection work each carry their own DIAL credential as well..
  7. 7Other. Local permits and any local requirements. A city or county building official may not issue a construction permit to a contractor who is required to hold a contractor registration number and does not have one, so the registration must be in hand before pulling permits. DIAL directs contractors to contact the city or county government for each project to find out what else that jurisdiction requires. Registration is also a precondition for being awarded a contract to perform work for the state or a state agency..

Published fees on this path total $50, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Surety bond

A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.

  • Surety bond · $25,000

Liability insurance

Some states require proof of general liability or workers' compensation coverage at licensing time.

  • Insurance

Business registration

If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.

  • Business license

How Iowa licenses residential contractors

Iowa residential contractor · “Construction Contractor Registration

Statewide license

Verified September 17, 2026· 6 sources

Issued by Iowa Department of Inspections, Appeals, and Licensing (DIAL), Contractor Registration

Iowa does not license residential building contractors. It registers them, and the registration is the only statewide credential a homebuilder or remodeler needs: there is no trade examination, no business-and-law examination, no experience or apprenticeship requirement, no financial statement and no named qualifying party anywhere in Iowa Code chapter 91C or in 481 Iowa Administrative Code chapter 465. Registration is with the Department of Inspections, Appeals, and Licensing, which took the program over from Iowa Workforce Development in the 2023 state government reorganization. The duty is broad and the threshold is low: every individual and business performing construction work in Iowa must register if they earn at least $2,000 a year from construction, and only people who earn less than that, or who work solely on their own real estate, are outside the law. The same registration covers houses, apartments and commercial buildings alike, because Iowa draws no residential/commercial line and issues no classes, tiers or dollar limits - the definition of construction it borrows from the employment security rules expressly reaches single-family housing construction, building alterations, land subdivision and development, and general contractors of every kind. The registration belongs to the business rather than to a person, so a builder moving to Iowa registers the sole proprietorship, partnership, corporation or LLC that will sign contracts, and each business with its own federal identification number registers separately. What Iowa asks for instead of qualifications is tax and workers' compensation compliance: an Iowa unemployment insurance employer account number, proof of workers' compensation coverage or a statement that none is required, a $50 annual fee, and - for any contractor whose principal place of business is outside Iowa - a $25,000 surety bond. Iowa does hold real competency licenses in the trades, through the Electrical Examining Board under chapter 103 and the Plumbing and Mechanical Systems Board under chapter 105, and those are separate credentials with their own exams.

Moving to IowaLeaving Iowa

Why Texas has nothing to transfer

Texas residential contractor

Licensed by cities and counties

Verified September 17, 2026· 15 sources

Texas issues no statewide residential contractor, home builder or remodeler license, and no state agency examines or qualifies people who build houses. The Texas Residential Construction Commission, which registered builders and remodelers from 2003, was abolished and its Act expired on September 1, 2009, and nothing replaced it. What Texas does license are individual trades: electricians and air conditioning and refrigeration contractors through the Texas Department of Licensing and Regulation, and plumbers through the Texas State Board of Plumbing Examiners, so a builder who self-performs that work needs the matching state license. Residential contracting itself is regulated, where at all, by cities through registration, insurance, bonding and permitting: San Antonio, Fort Worth, El Paso, Dallas and Austin all require a residential builder or home-improvement contractor to register before pulling a permit, while Houston states that general contractors are not required to be licensed. A builder moving to Texas therefore has no state license to transfer and no reciprocity to apply for; the practical work is registering in each city where they build, carrying the insurance and bonds those cities require, and hiring or becoming state-licensed trades. The one credential that does travel is a national ICC certification, which San Antonio accepts from the registration holder or a designated Certified Agent.

How local licensing works in Texas

How it works in Texas. There is no state license, no state application and no state exam for residential contractors. Cities control who may pull a residential building permit, and each city sets its own rules, so a builder registers separately in every jurisdiction where they work. Registration is about identity, insurance, bonding and (in one city) a national certification - not about trade competence testing, and not about what license you held in your last state. Nothing an out-of-state residential contractor holds gives a discount on any of it.

San Antonio. Development Services runs the most demanding residential program in the state, under Chapter 10-115 of the Code of Ordinances, with two registrations. A Residential Building Contractor registration covers 'the constructing, structural alteration, or enlarging any one or two-family detached dwelling' (new homes, additions, foundations, roofing, pools and spas, fences, minor repairs). It requires an FBI criminal history record dated within 30 days of submittal, liability insurance of at least $500,000 per occurrence, $1,000,000 aggregate and $500,000 aggregate for products and completed operations with the City of San Antonio as certificate holder, and a certification: 'either the registration holder or one agent affiliated with the contractor must obtain a Residential ICC Certification or other certifications approved by the Building Official; or the company has a minimum of 5 years of continued registration with no violations ... suspensions, or revocation.' The fee is $170 and the term is two years. A Home Improvement Contractor registration covers 'nonstructural repair, replacement, remodeling, alteration, conversion, or modernization to any existing building', needs the same FBI background check and insurance of at least $300,000 per occurrence and $600,000 aggregate, costs $150 for two years, and carries no certification requirement. Both applications ask whether the applicant has lost or been suspended from home improvement or residential building privileges in any Texas jurisdiction. Apply through the BuildSA portal or in person at 1901 S. Alamo Street; customer service is (210) 207-1111.

Dallas. Building Inspection registers general contractors on one form, and its own note defines the category broadly: 'A General Contractor includes, but is not limited to, the following: residential general contractor, commercial general contractor, roofing contractor, fence contractor, foundation contractor, demolition contractor and pool contractor.' The form states an annual registration or renewal fee of $120.00 and requires a contracting company addressed inside the city limits to give a Certificate of Occupancy number or have a home office form on file. The responsible party assigns PINs to the company staff allowed to sign permit applications. There is no exam and no experience requirement. Registrations are renewed in person at a Building Inspection office or online through DallasNow; call (214) 948-4480.

Fort Worth. Development Services requires that 'any firm, business, individual or organization obtaining a permit related to the building, mechanical, plumbing or electrical provisions' of the city codes hold a valid Contractor Registration, with a carve-out for a single-family homeowner working on their own residence. A residential builder registers as a Building Contractor: the completed application plus a copy of a valid driver's license, $168.75, expiring one year from the date of issuance. No trade license, exam or experience documentation is required for that type. Customer service is 817-392-2222.

El Paso. Planning and Inspections registers a General Contractor for 'New Residential, Additions, Alterations, and Roofing' as well as commercial work. The packet is an Assumed Name Certificate or corporate documents, the Contractor Registration Application, a certificate of general liability insurance of at least $100,000 with the City of El Paso as certificate holder, and a blanket building construction bond - the current application states $50,000 for general contractors, while the city's requirements sheet lists $25,000 (confirm the amount with the One Stop Shop before buying the bond). A $10,000 blanket bond covers a defined list of minor work such as fences, tents, temporary signs and patch-and-paint. The requirements sheet lists a $102.00 annual fee. The application 'must be filed annually to be eligible to obtain permits from the City of El Paso in accordance with Section 18.02.104.5 of the El Paso City Code.' One Stop Shop, 811 Texas Avenue, 915-212-0104.

Austin. Development Services is explicit that 'in Texas, anyone can be a General Contractor, including homeowners, and a state license is not required', but the general contractor named on a building permit must first register with Building and Trade Contractor Services through an Austin Build + Connect (AB+C) portal account, submitting the web registration form and a Letter of Authorization. General contractors register once and update only when their name, address or authorized agents change; the city publishes no fee for the registration.

Houston. Houston requires nothing of a residential builder. Its Residential Permitting 101 guide states that 'the building permit may be purchased by the owner, agent, contractor. General Contractors are not required to be licensed', and the plan review page repeats that 'a general contractor's license is not required to obtain building permits.' What Houston does require is that the trades register their state licenses with the city: a TDLR-licensed Master Electrician, a TDLR Class A or B air conditioning contractor and a TSBPE-licensed Master Plumber must each be registered with the City of Houston before buying a trade permit, and a sidewalk or driveway permit needs a contractor with a $2,000 surety bond.

Everywhere else. Smaller Texas cities and unincorporated county areas vary widely; many require only a permit and proof of insurance, and counties generally have no building-permit authority at all outside a city's limits and extraterritorial jurisdiction. Check the building or development services department of each city before contracting there.

Moving to TexasLeaving Texas

Common questions

Do I have to take the Iowa residential contractor exam if I'm licensed in Texas?
No. The trade exam is waived on this path.
What does it cost to get a Iowa residential contractor license from Texas?
Published fees on this path total $50, not counting exam vendor fees or bonds.
Do my Texas work hours count in Iowa?
No. Iowa does not credit out-of-state hours on this path.
How long does the application take?
The board's published or typical processing time is about 30 days.
Does it work the other way, from Iowa to Texas?
Not necessarily. Reciprocity is directed. Going from Iowa to Texas, the mechanism is not applicable.

Sources

  1. Iowa Code 103A.20 - State building code; permits, duty to issue · Iowa Code 103A.20(1)(b) · Iowa Legislature · Statute · verified September 17, 2026
  2. Iowa Code chapter 91C - Construction Contractors (full chapter text) · Iowa Code ch. 91C · Iowa Legislature · Statute · verified September 17, 2026
  3. DIAL Contractor Registration - Out-of-State Contractor Bond Form · Iowa Code ch. 91C · Iowa Department of Inspections, Appeals, and Licensing · Form · verified September 17, 2026
  4. DIAL - Contractor Registration (who must register, fee, out-of-state bond, FAQ) · Iowa Code ch. 91C · Iowa Department of Inspections, Appeals, and Licensing · Agency Page · verified September 17, 2026
  5. DIAL - Electrical Licensing (Iowa Electrical Examining Board) · Iowa Code ch. 103 · Iowa Department of Inspections, Appeals, and Licensing · Agency Page · verified September 17, 2026
  6. Iowa Contractor Registration - checklist and frequently asked questions brochure · Iowa Code ch. 91C · Iowa Department of Inspections, Appeals, and Licensing (Division of Labor) · Faq · verified September 17, 2026
  7. 481 Iowa Administrative Code chapter 465 - Construction Contractor Registration · 481 IAC ch. 465 · Iowa Legislature / Iowa Department of Inspections, Appeals, and Licensing · Admin Rule · verified September 17, 2026
  8. 871 IAC 23.82(96) - Definition of construction employer (scope of "construction" for contractor registration) · 871 IAC 23.82(96) · Iowa Legislature / Iowa Workforce Development · Admin Rule · verified September 17, 2026
  9. NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
  10. NASCLA Accredited Examination for Commercial General Building Contractors - participating state agencies · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related