Texas to Virginia: residential contractor license reciprocity
Texas does not issue a statewide residential contractor license, so there is nothing to transfer. Here is Virginia's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Out-of-state residential builders: experience transfers, the RBC exam does not
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
Virginia has no general reciprocity or license-recognition route into the contractor license for residential builders arriving from a state other than North Carolina or Ohio, so the firm applies as a new applicant. What does transfer is experience: the application asks for every contractor license, certification and registration the business, its qualified individual, its designated employee and its responsible management hold outside Virginia, and the Board will review a current out-of-state license as proof of the one, three or five years of residential building experience its class requires. To have it counted, the out-of-state board must supply a Certification or Letter of Good Standing giving the license number, the initial date of licensure, the expiration date, how the license was obtained (examination, reciprocity and so on) and any closed disciplinary actions. The qualified individual still sits the Virginia RBC technical examination with PSI after the Board pre-approves the Experience Verification Form, a Class A or Class B firm's designated employee still sits the business examination, and the eight-hour pre-license education course is still required. The Board's universal license recognition program covers Virginia's individual tradesman and other personal credentials, not the Class A, B or C contractor license, so it is not a route to this license.
The class letter is about contract value, not about houses versus commercial work: a residential builder can hold any of Class A, B or C with the RBC classification, and the fees, net worth and experience figures below change with the class. Virginia also requires the firm to register with the State Corporation Commission and to comply with the local license requirements of every county, city and town where it works. The Board's agreement list also carries an Ohio entry, pairing Ohio's Business and Law examination with Virginia's Advanced and General law examinations, but on the Board's own agreements document that sentence belongs to the Ohio master electrician entry and the arrangement is an electrical one; it does not reach the Class A, B or C building classifications, and Ohio does not license residential or general building contractors at the state level in any case. The Board publishes only the existence of its agreements, not their terms; call (804) 367-8511 or email [email protected] before assuming an out-of-state credential will be accepted.
At a glance
- Trade exam
- Required
- Law / code exam
- Required
- Out-of-state hours
- Count toward eligibility
- Typical processing
- About 30 days
What you must already have
- The qualified individual must have one year (Class C), three years (Class B) or five years (Class A) of experience in residential building contracting; experience earned in another state counts18VAC50-22-40, -50 and -60 set the ladder by license class; the Board pre-approves the Experience Verification Form before the qualified individual may sit the RBC technical examination.
- Your Texas license must be active and in good standing.Certification or Letter of Good Standing showing license number, initial date of licensure, expiration date, means of obtaining licensure and all closed disciplinary actions.
- You must have no disciplinary action or unresolved complaints on your record.
What you'll do to get licensed in Virginia
- 1Application fee. Pay the application fee ($274.50). Class C initial license fee on the current application form, which combines the $235 fee in 18VAC50-22-100, the $25 Contractor Transaction Recovery Fund assessment and the technology fee of $7.25 per year. The same form charges $419.50 for Class B and $439.50 for Class A. Fees are not refundable..
- 2Financial responsibility. Show financial responsibility of at least $15,000 (if applicable). Class B applicants must document at least $15,000 of net worth or equity and Class A applicants at least $45,000, using the Board's Financial Statement Form with supporting documentation, a CPA-reviewed financial statement or a CPA audit. Class C has no financial requirement..
- 3Surety bond. Post a surety bond ($50,000) (if applicable). A $50,000 surety bond on the Board's Surety Bond Form may be filed instead of the net worth documentation for a Class A or Class B license..
- 4Trade exam. Pass the destination's trade exam. Virginia Residential Building (RBC) technical examination for the qualified individual, administered by PSI after the Board pre-approves the application and Experience Verification Form..
- 5Law / code exam. Pass a law, rules, or code exam. PSI contractor business examination for the designated employee of a Class A or Class B firm: the General and Virginia portions for Class B, and the Advanced, General and Virginia portions for Class A. Class C licenses have no designated employee and no business examination..
- 6Exam fee. Pay the exam fee ($85). Paid directly to PSI: $85 for a qualified individual specialty examination such as RBC, and for the designated employee's business examination $40 for one portion, $72 for two or $85 for three. Examination fees are set by the Board's vendor contract and may not exceed $200 per element..
- 7Other. Eight hours of Board-approved pre-license education, completed by the designated employee or a member of responsible management for Class A and Class B, or by a member of responsible management for Class C. The Board approves the courses but providers set their own prices..
- 8Other. Certification or Letter of Good Standing from each out-of-state board, prepared by that board, if an out-of-state license is being submitted for experience credit or under an examination agreement. (if applicable).
- 9Business license. Obtain a business license. Registration of the business entity with the Virginia State Corporation Commission, including out-of-state businesses, plus compliance with the business license requirements of every county, city and town where the firm performs work..
- 10Background check. Complete a background check (if applicable). An original criminal history record dated within 90 days is required from each jurisdiction where any person listed on the application has a felony conviction, or a non-marijuana misdemeanor conviction within the last three years..
- 11License fee. Pay the license or certificate fee ($250). Class C renewal every two years: the $220 renewal fee in 18VAC50-22-140 plus the $30 Recovery Fund assessment. Class B renewal is $260 and Class A $270, each plus the $30 assessment. Licenses expire two years from the last day of the month in which they were issued..
Published fees on this path total $609.50, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Surety bond
A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.
- Surety bond · $50,000 · if applicable
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Trade exam
- Law / code exam
Continuing education
Renewals usually need approved CE hours, often on the latest NEC. Reciprocal licensees are rarely exempt.
- Other
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Business license
How Virginia licenses residential contractors
Virginia residential contractor · “Class A, B or C Contractor, Residential Building (RBC)”
Statewide license
Issued by Virginia Board for Contractors (DPOR)
Virginia licenses contractors through the Board for Contractors at the Department of Professional and Occupational Regulation, and the license is issued to a business entity rather than to a person. Every license carries two separate things: a class (A, B or C) that sets the dollar limit on the work, and one or more classifications or specialty designations that set the type of work. Class C covers a single contract or project over $1,000 but under $30,000 and under $250,000 of work in any 12 months; Class B covers $30,000 to under $150,000 per project and $250,000 to under $1 million a year, and requires $15,000 of documented net worth or equity; Class A has no monetary ceiling and requires $45,000 of net worth or equity. A $50,000 surety bond on the Board's form may be filed instead of the financial statement, and Class C has no financial requirement at all. Homes-only work is the Residential Building (RBC) classification, which covers dwellings and townhouses and their accessory structures and folds in concrete, home improvement, masonry, painting, roofing, landscape and swimming pool work on those properties, but never electrical, plumbing, HVAC or gas fitting and never commercial buildings; smaller repair and remodeling firms may instead take the Home Improvement (HIC) specialty. The firm names a qualified individual for each designation, who must have one year (Class C), three years (Class B) or five years (Class A) of experience in that work and must pass the Board's RBC technical examination, and Class A and Class B firms also name a designated employee who passes the PSI business examination. All classes need eight hours of Board-approved pre-license education, and licenses run two years from the last day of the month of issuance.
Why Texas has nothing to transfer
Texas residential contractor
Licensed by cities and counties
Texas issues no statewide residential contractor, home builder or remodeler license, and no state agency examines or qualifies people who build houses. The Texas Residential Construction Commission, which registered builders and remodelers from 2003, was abolished and its Act expired on September 1, 2009, and nothing replaced it. What Texas does license are individual trades: electricians and air conditioning and refrigeration contractors through the Texas Department of Licensing and Regulation, and plumbers through the Texas State Board of Plumbing Examiners, so a builder who self-performs that work needs the matching state license. Residential contracting itself is regulated, where at all, by cities through registration, insurance, bonding and permitting: San Antonio, Fort Worth, El Paso, Dallas and Austin all require a residential builder or home-improvement contractor to register before pulling a permit, while Houston states that general contractors are not required to be licensed. A builder moving to Texas therefore has no state license to transfer and no reciprocity to apply for; the practical work is registering in each city where they build, carrying the insurance and bonds those cities require, and hiring or becoming state-licensed trades. The one credential that does travel is a national ICC certification, which San Antonio accepts from the registration holder or a designated Certified Agent.
How local licensing works in Texas
How it works in Texas. There is no state license, no state application and no state exam for residential contractors. Cities control who may pull a residential building permit, and each city sets its own rules, so a builder registers separately in every jurisdiction where they work. Registration is about identity, insurance, bonding and (in one city) a national certification - not about trade competence testing, and not about what license you held in your last state. Nothing an out-of-state residential contractor holds gives a discount on any of it.
San Antonio. Development Services runs the most demanding residential program in the state, under Chapter 10-115 of the Code of Ordinances, with two registrations. A Residential Building Contractor registration covers 'the constructing, structural alteration, or enlarging any one or two-family detached dwelling' (new homes, additions, foundations, roofing, pools and spas, fences, minor repairs). It requires an FBI criminal history record dated within 30 days of submittal, liability insurance of at least $500,000 per occurrence, $1,000,000 aggregate and $500,000 aggregate for products and completed operations with the City of San Antonio as certificate holder, and a certification: 'either the registration holder or one agent affiliated with the contractor must obtain a Residential ICC Certification or other certifications approved by the Building Official; or the company has a minimum of 5 years of continued registration with no violations ... suspensions, or revocation.' The fee is $170 and the term is two years. A Home Improvement Contractor registration covers 'nonstructural repair, replacement, remodeling, alteration, conversion, or modernization to any existing building', needs the same FBI background check and insurance of at least $300,000 per occurrence and $600,000 aggregate, costs $150 for two years, and carries no certification requirement. Both applications ask whether the applicant has lost or been suspended from home improvement or residential building privileges in any Texas jurisdiction. Apply through the BuildSA portal or in person at 1901 S. Alamo Street; customer service is (210) 207-1111.
Dallas. Building Inspection registers general contractors on one form, and its own note defines the category broadly: 'A General Contractor includes, but is not limited to, the following: residential general contractor, commercial general contractor, roofing contractor, fence contractor, foundation contractor, demolition contractor and pool contractor.' The form states an annual registration or renewal fee of $120.00 and requires a contracting company addressed inside the city limits to give a Certificate of Occupancy number or have a home office form on file. The responsible party assigns PINs to the company staff allowed to sign permit applications. There is no exam and no experience requirement. Registrations are renewed in person at a Building Inspection office or online through DallasNow; call (214) 948-4480.
Fort Worth. Development Services requires that 'any firm, business, individual or organization obtaining a permit related to the building, mechanical, plumbing or electrical provisions' of the city codes hold a valid Contractor Registration, with a carve-out for a single-family homeowner working on their own residence. A residential builder registers as a Building Contractor: the completed application plus a copy of a valid driver's license, $168.75, expiring one year from the date of issuance. No trade license, exam or experience documentation is required for that type. Customer service is 817-392-2222.
El Paso. Planning and Inspections registers a General Contractor for 'New Residential, Additions, Alterations, and Roofing' as well as commercial work. The packet is an Assumed Name Certificate or corporate documents, the Contractor Registration Application, a certificate of general liability insurance of at least $100,000 with the City of El Paso as certificate holder, and a blanket building construction bond - the current application states $50,000 for general contractors, while the city's requirements sheet lists $25,000 (confirm the amount with the One Stop Shop before buying the bond). A $10,000 blanket bond covers a defined list of minor work such as fences, tents, temporary signs and patch-and-paint. The requirements sheet lists a $102.00 annual fee. The application 'must be filed annually to be eligible to obtain permits from the City of El Paso in accordance with Section 18.02.104.5 of the El Paso City Code.' One Stop Shop, 811 Texas Avenue, 915-212-0104.
Austin. Development Services is explicit that 'in Texas, anyone can be a General Contractor, including homeowners, and a state license is not required', but the general contractor named on a building permit must first register with Building and Trade Contractor Services through an Austin Build + Connect (AB+C) portal account, submitting the web registration form and a Letter of Authorization. General contractors register once and update only when their name, address or authorized agents change; the city publishes no fee for the registration.
Houston. Houston requires nothing of a residential builder. Its Residential Permitting 101 guide states that 'the building permit may be purchased by the owner, agent, contractor. General Contractors are not required to be licensed', and the plan review page repeats that 'a general contractor's license is not required to obtain building permits.' What Houston does require is that the trades register their state licenses with the city: a TDLR-licensed Master Electrician, a TDLR Class A or B air conditioning contractor and a TSBPE-licensed Master Plumber must each be registered with the City of Houston before buying a trade permit, and a sidewalk or driveway permit needs a contractor with a $2,000 surety bond.
Everywhere else. Smaller Texas cities and unincorporated county areas vary widely; many require only a permit and proof of insurance, and counties generally have no building-permit authority at all outside a city's limits and extraterritorial jurisdiction. Check the building or development services department of each city before contracting there.
- San Antonio (Development Services - Residential Building Contractor and Home Improvement Contractor registration)
- Dallas (Building Inspection - General Contractor registration)
- Fort Worth (Development Services - Building Contractor registration)
- El Paso (Planning and Inspections - General Contractor registration)
- Austin (Development Services - Building and Trade Contractor Services registration)
- Houston (Houston Permitting Center - no general contractor license required; trade registration only)
Common questions
- Do I have to take the Virginia residential contractor exam if I'm licensed in Texas?
- Yes. Virginia requires the trade exam on this path, plus a law or code exam.
- What does it cost to get a Virginia residential contractor license from Texas?
- Published fees on this path total $609.50, not counting exam vendor fees or bonds.
- Do my Texas work hours count in Virginia?
- Yes. Documented out-of-state experience counts toward Virginia's eligibility requirements.
- How long does the application take?
- The board's published or typical processing time is about 30 days.
- Does it work the other way, from Virginia to Texas?
- Not necessarily. Reciprocity is directed. Going from Virginia to Texas, the mechanism is not applicable.
Sources
- 18VAC50-22-100 - Fees · 18VAC50-22-100; Va. Code § 54.1-1119 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
- 18VAC50-22-110 - Renewal required · 18VAC50-22-110 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
- 18VAC50-22-140 - Renewal fees · 18VAC50-22-140 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
- 18VAC50-22-20 - Definitions of license classifications · 18VAC50-22-20 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
- 18VAC50-22-30 - Definitions of specialty services · 18VAC50-22-30 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
- 18VAC50-22-40 - Requirements for a Class C license · 18VAC50-22-40 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
- 18VAC50-22-50 - Requirements for a Class B license · 18VAC50-22-50 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
- 18VAC50-22-60 - Requirements for a Class A license · 18VAC50-22-60 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
- 18VAC50-22-70 - Qualifications for licensure by reciprocity or substantial equivalency · 18VAC50-22-70 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
- 18VAC50-22-80 - Examination fees · 18VAC50-22-80 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
- Va. Code 54.1-1100 - Definitions (Class A, Class B and Class C contractors) · Va. Code § 54.1-1100 · Virginia General Assembly (LIS) · Statute · verified September 17, 2026
- Form A501-27LIC - Contractor Licensing Information and Application Instructions (v18, 08/01/2026) · Virginia Board for Contractors (DPOR) · Form · verified September 17, 2026
- Form A501-27EXINFO - Board for Contractors, Requirements for Qualified Individuals (v10, 09/01/2025) · Virginia Board for Contractors (DPOR) · Form · verified September 17, 2026
- DPOR Board for Contractors - program page (licensing, education and exams, reciprocal agreements) · Virginia Department of Professional and Occupational Regulation · Agency Page · verified September 17, 2026
- Virginia Board for Contractors - Reciprocal Licensing/Examination Agreements with Other Jurisdictions · Virginia Board for Contractors (DPOR) · Agreement Document · verified September 17, 2026
- DPOR - Universal License Recognition · Va. Code 54.1-204, 54.1-205 · Virginia Department of Professional and Occupational Regulation · Agency Page · verified September 17, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.