Nevada to Wyoming: master electrician license reciprocity
Nevada does not issue a statewide master electrician license, so there is nothing to transfer. Here is Wyoming's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Licensure by examination with out-of-state experience (states without a master reciprocal agreement)
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
Only Idaho, South Dakota and Iowa masters can reciprocate; a master electrician from any other state (including the fourteen journeyman-only reciprocal states) applies for the Wyoming master exam. Out-of-state experience counts toward the 16,000-hour requirement when documented by notarized employer letters or the Work Verification Form, notarized union letters, or official letters from other licensing boards, and the department may accept a current license from a state board with equal or stricter work-history requirements as proof of hours; 8,000 of the hours must have been as a licensed journeyman. The applicant must also show 576 hours of approved classroom instruction (or the 20,000-hour exemption), pass the exam with 75%, and pay the $200 license fee. W.S. 35-9-126(d) permits a discretionary reciprocal license for any out-of-state license earned by an equal or greater exam, but the department applies reciprocity only to its listed agreement states.
Exam vendor and exam fee are not published on the licensing page (fees are paid to the testing facility; statutory cap $300).
At a glance
- Trade exam
- Required
- Law / code exam
- Not required
- Out-of-state hours
- Count toward eligibility
- Typical processing
- About 15 days
What you must already have
- You must document at least 16,000 hours of qualifying work experience.Eight years in the electrical wiring industry across residential, commercial and industrial work, of which 8,000 hours were as a licensed journeyman electrician
- Held a journeyman electrician license for four years (8,000 hours)
- 576 hours of electrically related classroom instruction from an approved apprenticeship program, or 10 years / 20,000 hours as a licensed journeyman or master approved by the Chief Electrical Inspector
What you'll do to get licensed in Wyoming
- 1Trade exam. Pass the destination's trade exam. Wyoming Master Electrician examination, open book on the current NEC, 75% to pass.
- 2Exam fee. Pay the exam fee. Examination fee paid to the testing facility (amount not published on the licensing page; statutory cap $300).
- 3License fee. Pay the license or certificate fee ($200). Initial Master Electrician license fee paid after uploading the exam pass letter (plus 2.5% card processing fee).
- 4Other. Government-issued ID verification in the eLicense portal, work verification documents and apprenticeship education transcripts.
Published fees on this path total $200, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Trade exam
- Exam fee
How Wyoming licenses master electricians
Wyoming master electrician · “Master Electrician”
Statewide license
Wyoming issues a statewide Master Electrician license through the Department of Fire Prevention and Electrical Safety. To sit for the master exam an applicant documents eight years (16,000 hours) of work in the electrical wiring industry, of which four years (8,000 hours) were as a licensed journeyman, plus 576 hours of approved classroom instruction (or the 20,000-hour exemption), and must score 75% on the open-book NEC exam. The initial license fee is $200; the license runs three years, expiring July 1, and renews for $100 with 16 hours of approved continuing education, 8 of them on the NEC. A master electrician may serve as master of record for only one electrical contractor (W.S. 35-9-126). Wyoming has master-level reciprocity agreements with Idaho, South Dakota and Iowa only.
Why Nevada has nothing to transfer
Nevada master electrician
Licensed by cities and counties
Nevada does not issue a master electrician license. The state-level electrical credential is a classification C-2 Electrical Contracting license from the Nevada State Contractors Board (NSCB), which is a business license issued to a sole proprietor, partnership, corporation or LLC and qualified by a named individual, not a license held by the electrician personally. A master-level personal card exists only at the local level: Clark County, the City of Las Vegas and the City of Reno recognize a 'Master Electrician' category, obtained by passing the ICC G16 Master Electrician exam at 75% and holding an ESP-issued Nevada Electrical Qualifications Card, and Clark County code allows a master electrician or electrical qualified individual to satisfy the contractor's on-site supervision duty. None of these jurisdictions publish reciprocity for an out-of-state master license. To contract independently, an arriving master electrician must obtain a C-2 license: the qualifying individual needs four years of experience as a journeyman, foreman, supervising employee or contractor within the past 15 years, must pass the PSI-administered Nevada Business and Law exam and the C-2 trade exam, and the business must pay the $300 application fee and $600 biennial license fee, submit a financial statement and background check, and post a bond of $1,000 to $500,000 set by the Board. Under licensure by endorsement (NAC 624.600 and 624.615) the C-2 trade exam and experience certification are waived for a qualified individual who has held an active electrical contractor license with no discipline for the past four years in Arizona (CR-11), California (C-10), Connecticut (E1), Louisiana (9 Electrical Work), North Carolina (Unlimited Electrical) or Tennessee (CE Electrical), while Florida (EC) and West Virginia (A Electrical) licensees get experience credit but must take the Nevada trade exam; the Business and Law exam is never waived.
How local licensing works in Nevada
State level. NRS 624 and NAC 624 create only contractor licenses. NAC 624.200 defines classification C-2 Electrical Contracting (C-2a Electrical Wiring, C-2b Integrated Ceilings, C-2c Fire Detection, C-2d Low Voltage Systems, C-2e Lines to Transmit Electricity, C-2f Residential Wiring, C-2g Photovoltaics). The license belongs to the business; the individual who qualifies it must have four years of journeyman-or-higher experience within 15 years (NRS 624.260(6)) and pass the Business and Law and trade exams unless the trade exam is waived under NAC 624.600 for an endorsing-state exam approved under NAC 624.615. Fees: $300 application, $600 to issue or renew (NAC 624.130), PSI exam fees, bond $1,000-$500,000 (NRS 624.270).
Clark County. Clark County Code §22.02.260 recognizes a Master Electrician (all aspects of electrical work) alongside the journeyman categories; a master or the contractor's qualified individual is responsible for supervision, inspection and code conformance of the contractor's permitted work, and a master found not to meet the NSCB qualified-individual standard is not recognized until re-examined. The exam is the ICC G16 Master Electrician (75% under the ESP program) and the card is issued by ESP with 30 CEU hours per three-year renewal, including an 8-hour NEC update. The code's only equivalency is for certificates from the accepted testing agency or other Nevada political subdivisions within Clark County.
City of Las Vegas and City of Henderson. Las Vegas Administrative Code §306 uses the same master electrician / qualified individual / journeyman supervision rule and the ESP card; Henderson is listed by ESP as requiring the card but its ordinance was not verified.
City of Reno. Reno's published journeyman program covers the ICC G17/G18 exams; the ESP presentation lists Reno as a participating jurisdiction for master cards as well, but Reno's own page does not describe a separate master card.
Out-of-state holders. No local jurisdiction publishes a waiver of the ICC master exam for an out-of-state master license. The practical route is to pass the ICC G16 exam and obtain the ESP card, or, if contracting, to apply for a C-2 license through NSCB, where the endorsement charts above may waive the trade exam.
- Clark County (Department of Building and Fire Prevention)
- City of Las Vegas (Department of Building and Safety)
- City of Henderson (per ESP program notice; ordinance not verified)
- City of Reno (Development Services)
Common questions
- Do I have to take the Wyoming master electrician exam if I'm licensed in Nevada?
- Yes. Wyoming requires the trade exam on this path.
- What does it cost to get a Wyoming master electrician license from Nevada?
- Published fees on this path total $200, not counting exam vendor fees or bonds.
- Do my Nevada work hours count in Wyoming?
- Yes. Documented out-of-state experience counts toward Wyoming's eligibility requirements.
- How long does the application take?
- The board's published or typical processing time is about 15 days.
- Does it work the other way, from Wyoming to Nevada?
- Not necessarily. Reciprocity is directed. Going from Wyoming to Nevada, the mechanism is not applicable.
Sources
- Wyoming Statutes Title 35, Chapter 9, Article 1 - Department of Fire Prevention and Electrical Safety · W.S. 35-9-126(a), 35-9-126(d), 35-9-129 · Wyoming Legislature · Statute · verified September 15, 202635-9-126(a): applicants for master and journeyman licenses apply to the chief electrical inspector, pass the examination and pay the license fee; a master license expires July 1 and a journeyman license January 1 in the third year after issue; up to 4,000 hours of electrical school credit toward work experience. 35-9-126(d): the department may issue a reciprocal license to an applicant who obtained an out-of-state or foreign license through an examination equal to or exceeding Wyoming's. 35-9-129: fee caps - master $200, journeyman $100, temporary permit $50, examination $300.
- Wyoming State Fire Marshal's Office - Fire Council and Electrical Board · Wyoming Department of Fire Prevention and Electrical Safety · Agency Page · verified September 15, 2026The five-member Electrical Board appointed by the governor adopts the rules for licensing master and journeyman electricians, technicians, apprentices, temporary permits and reciprocal licenses.
- Wyoming State Fire Marshal's Office - Electrical Safety Home Page · Wyoming Department of Fire Prevention and Electrical Safety · Agency Page · verified September 15, 2026Effective April 1, 2025 a 2.5% processing fee (minimum $1) is added to card payments; Wyoming currently enforces the 2023 NEC with the 2026 NEC effective July 1, 2026; links the licensing portal and the statutes and rules.
- Wyoming Department of Fire Prevention and Electrical Safety - Licensing · W.S. 35-9-101 et seq. · Wyoming State Fire Marshal's Office, Electrical Safety Division · Agency Page · verified September 15, 2026The only statewide construction-trade licensing program in Wyoming; the page lists apprentice, low-voltage/limited technician, journeyman and master electrician licenses and electrical/low-voltage contractor licenses. It contains no HVAC, mechanical or refrigeration license. The one HVAC-related state credential is the LM-H Limited Technician license, which covers the electrical wiring of HVAC systems only.
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.