LicensebyState

Tennessee to Utah: master electrician license reciprocity

No credit· Start overVerified September 14, 2026· 7 sources

Tennessee does not issue a statewide master electrician license, so there is nothing to transfer. Here is Utah's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

Out-of-state applicants without an equivalent master license (standard route with out-of-state experience credit)

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

Applicants whose origin jurisdiction is not shown as equivalent on DOPL's master endorsement map must meet Utah's standard master qualifications: 8,000 hours of work experience as a licensed journeyman electrician (4,000 hours with an associate of applied science from an electrical trade school, or 2,000 hours as a licensed apprentice with an EAC/ABET-accredited bachelor's or master's degree in electrical engineering). Journeyman hours earned in another state count when documented on the Verification of Electrical Experience for Master Level Applicants form with official verification from that jurisdiction. The applicant must pass the Utah Master Electrician Law and Rule Exam (75% minimum) and the Utah Electrician Practical Exam (waived if already passed at the journeyman level), and pay the $116 application fee. Jurisdictions shown in light blue on the map issue contractor licenses; the individual who met the licensing requirements as the contractor's responsible person may instead qualify for endorsement.

At a glance

Trade exam
Required
Law / code exam
Required
Out-of-state hours
Count toward eligibility

What you must already have

  • You must document at least 8,000 hours of qualifying work experience.As a licensed journeyman electrician; reduced to 4,000 hours with an AAS from an electrical trade school, or 2,000 apprentice hours with an EAC/ABET-accredited electrical engineering degree.
  • Hours obtained outside Utah must be supported by official verification from the jurisdiction where they were obtained.

What you'll do to get licensed in Utah

  1. 1Application fee. Pay the application fee ($116). Non-refundable DOPL application-processing fee.
  2. 2Law / code exam. Pass a law, rules, or code exam. Utah Master Electrician Law and Rule Exam, 75% minimum, administered by Prov; exam fee paid to Prov.
  3. 3Trade exam. Pass the destination's trade exam. Utah Electrician Practical Exam (6 modules), administered by Prov; waived if previously passed at the journeyman level.

Published fees on this path total $116, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Law / code exam
  • Trade exam

How Utah licenses master electricians

Utah master electrician · “Master Electrician

Statewide license

Verified September 14, 2026· 5 sources

Issued by Utah Division of Professional Licensing (DOPL)

Utah issues a statewide Master Electrician license through DOPL under Utah Code 58-55 and Rule R156-55b. There are no signed master-level reciprocity agreements; out-of-state masters apply by endorsement under Utah Code 58-1-302 if DOPL's Endorsement to Utah: Master Electrician map lists their license as equivalent, they have held it at least one year, and it is active and in good standing. Unlike the journeyman level, every master applicant, including endorsement applicants, must pass the Utah Master Electrician Law and Rule Examination with a score of at least 75%. Several states issue only an electrical contractor license; DOPL may endorse the individual who qualified as the contractor's responsible person. Applicants without an equivalent license use verified out-of-state journeyman hours toward the standard route.

Moving to UtahLeaving Utah

Why Tennessee has nothing to transfer

Tennessee master electrician

Licensed by cities and counties

Verified September 15, 2026· 13 sources

Issued by Local code enforcement offices (Nashville, Memphis/Shelby County, Knoxville, Chattanooga and other exempt jurisdictions); state issues only the CE contractor license

Tennessee does not issue a master electrician license. The state-level credential for electrical contracting is a contractor license with the CE (electrical) classification from the Board for Licensing Contractors, which is issued to a business (sole proprietorship, partnership, LLC or corporation) that names a qualifying agent, and which is required for any electrical project of $25,000 or more. To obtain it the qualifying agent passes the Tennessee Business & Law exam and the CE trade exam (Prov), and the business files a reviewed or audited CPA financial statement (or, from July 1, 2026, a surety bond) that sets its monetary limit, proves general liability and workers' compensation insurance, and pays a $250 application fee ($200 biennial renewal). The Board has trade-exam-waiver agreements under which a contractor licensed in Alabama, Louisiana, Mississippi, North Carolina, Ohio, South Carolina or West Virginia, or one who passed the NASCLA electrical exam, skips the CE trade exam but still takes the Business & Law exam and meets every other requirement; the Board stresses that these 'do NOT allow using another state's license in Tennessee'. Master electrician licenses proper exist only at the local level in the jurisdictions that run their own inspection programs: Nashville (Metro Master Electrician, six years of experience), Memphis/Shelby County (Master Electrician, four years as a journeyman), Chattanooga (Class I electrical contractor, three years as a journeyman) and other exempt jurisdictions, each with its own exam and fees and none publishing reciprocity for out-of-state masters. An out-of-state master electrician who only wants to work for an employer needs no state license; to pull permits for small jobs they need the local master license or an LLE where accepted, and to contract for work of $25,000 or more they need the state CE contractor license.

How local licensing works in Tennessee

State CE contractor license (business level). Required statewide for electrical projects of $25,000 and up and accepted by every local jurisdiction for permits, but it is a business license, not a personal master credential. Requirements: qualifying agent (owner, officer or full-time employee) passes the Tennessee Business & Law exam and the Electrical (CE) trade exam administered by Prov; reviewed or audited financial statement less than 12 months old (or a contractors' surety bond at 50% of the requested limit from July 1, 2026) setting a monetary limit of 10 times the lesser of working capital or net worth ($300,000 of each for an unlimited limit); general liability insurance scaled to the limit; workers' compensation or exemption; $250 initial fee, $200 renewal every two years; exam scores valid about two years. Trade exam waiver (the only state reciprocity): a contractor licensed in Alabama, Louisiana, Mississippi, North Carolina, Ohio, South Carolina or West Virginia whose board verifies a comparable electrical exam on the Request for Contractor License Verification form, or who passed the NASCLA Electrical exam, files that verification in place of the CE trade exam score. The Business & Law exam is never waived, applicants with discipline, open complaints or felonies are ineligible, and the waiver cannot be used for the LLE. Arkansas's agreement covers only building classifications, not electrical.

Nashville (Metro Codes and Building Safety). The Mechanical, Plumbing, and Electrical Examiners and Appeals Board issues the Metropolitan Master Electrician certificate. Applicants need six years of experience (an electrical engineering degree may substitute), employer verification letters, a character letter and approval by the Chief Electrical Inspector, then pass the Prov-administered Metro master exam with 70%. The application asks whether the applicant holds a master license in another city or state and how long, but no exam waiver is described. Nashville registers state CE contractors separately.

Memphis / Shelby County (Office of Construction Code Enforcement). The Master Electrician license (Sec. 1305 of the joint electrical code) requires age 24 and either an electrical engineering degree plus two years of installation experience or four certified years as a journeyman; application in person with three industry recommendations, 30-day investigation, exam before the Electrical Code Advisory Board on theory, installation, the NEC and local codes. Fees: exam $150, initial license $100, active renewal $150. A separate Electrical Contractor license ($150 exam, $150 license, $150 registration) must be held by or employ a master; state-certified CE contractors register for $150 instead of testing. No reciprocity provision appears in the code.

Chattanooga (Land Development Office). The Class I electrical license is the contractor/master credential: three or more years as a journeyman or plant electrician (or three years as a Class II residential contractor, a prior Class I license, a Tennessee PE license, or equivalent), city examination, $415 per two-year term. A Board of Electrical Examiners oversees testing; no reciprocity is mentioned.

Knoxville (Plans Review & Inspections). Knoxville is on the state's exempt list and requires a city registration to pull permits; a state CE contractor registers directly. Details of Knoxville's own electrical contractor/master exam and fees are not published on the pages found (865-215-4311).

Out-of-state holders. No Tennessee city or the state endorses another state's master license as such. The realistic paths are: (1) obtain the state CE contractor license, using the trade-exam waiver if licensed in AL, LA, MS, NC, OH, SC or WV or NASCLA-tested, which every jurisdiction accepts; or (2) apply for the local master license in each exempt jurisdiction where you will work, documenting the experience required there and passing the local exam.

Moving to TennesseeLeaving Tennessee

Common questions

Do I have to take the Utah master electrician exam if I'm licensed in Tennessee?
Yes. Utah requires the trade exam on this path, plus a law or code exam.
What does it cost to get a Utah master electrician license from Tennessee?
Published fees on this path total $116, not counting exam vendor fees or bonds.
Do my Tennessee work hours count in Utah?
Yes. Documented out-of-state experience counts toward Utah's eligibility requirements.
Does it work the other way, from Utah to Tennessee?
Not necessarily. Reciprocity is directed. Going from Utah to Tennessee, the mechanism is not applicable.

Sources

  1. Utah DOPL - Electrical Exam Information · Utah Division of Professional Licensing (DOPL) · Agency Page · verified September 14, 2026Journeyman: Utah Journeyman Electrician Written Exam + Utah Electrician Practical Exam (6 modules). Master: Utah Master Electrician Law and Rule Exam + Utah Electrician Practical Exam. Exams administered by Prov; fee amounts are published by Prov, not on this page.
  2. Master Electrician - Apply for a License · Utah Division of Professional Licensing (DOPL) · Agency Page · verified September 14, 2026States: 'All applicants will be required to pass the Utah Master Electrician Law and Rule examination.'
  3. Master Electrician - Out of State Applicants Applying by Endorsement · Utah Division of Professional Licensing (DOPL) · Agency Page · verified September 14, 2026
  4. Utah Electrician Application (JE / RJE / ME / RME) with checklist and instructions · Utah Division of Professional Licensing (DOPL) · Form · verified September 14, 2026Form version v20260716. $116.00 non-refundable application-processing fee for all applicants. Endorsement checklist: official verification showing active licensure in good standing for at least one year from a jurisdiction designated as equivalent; master endorsement applicants must pass the Utah Master Electrician Law and Rule Examination at 75% or greater. Hours obtained outside Utah count with official verification from that jurisdiction.
  5. Endorsement to Utah: Master Electrician (state-by-state equivalency map) · Utah Code 58-55; 58-1-302 · Utah Division of Professional Licensing (DOPL) · Other · verified September 14, 2026Map last updated 7/27/2020. Green = equivalent license; yellow = additional documentation needed (AK); light blue = contractor license where the responsible individual may qualify; gray = no equivalent statewide license.
  6. Licensure By Endorsement Verification Form (LE-58-V-App) · Utah Division of Professional Licensing (DOPL) · Form · verified September 14, 2026Completed by the origin state; records method of licensure (exam date and score, apprenticeship or hours) and disciplinary history.
  7. Utah Admin. Code R156-55b Electricians Licensing Act Rule - 2025 amendment text (Utah State Bulletin 2025-11, Filing 57162) · Utah Admin. Code R156-55b-302a, R156-55b-302b · Utah Division of Professional Licensing (DOPL) · Admin Rule · verified September 14, 2026Rule text as amended in 2025 (anticipated effective 7/22/2025). R156-55b-302a: journeyman = 576-hour program over at least 48 months plus 8,000 apprentice hours, or 16,000 apprentice hours; master = 8,000 journeyman hours (or 4,000 with AAS, or 2,000 apprentice hours with ABET EE degree). R156-55b-302b: journeyman passes Written Exam (75%) and Practical Exam; master passes Law and Rule Exam (75%). The eRules page at adminrules.utah.gov could not be retrieved.

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related