Tennessee to Wyoming: master electrician license reciprocity
Tennessee does not issue a statewide master electrician license, so there is nothing to transfer. Here is Wyoming's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Licensure by examination with out-of-state experience (states without a master reciprocal agreement)
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
Only Idaho, South Dakota and Iowa masters can reciprocate; a master electrician from any other state (including the fourteen journeyman-only reciprocal states) applies for the Wyoming master exam. Out-of-state experience counts toward the 16,000-hour requirement when documented by notarized employer letters or the Work Verification Form, notarized union letters, or official letters from other licensing boards, and the department may accept a current license from a state board with equal or stricter work-history requirements as proof of hours; 8,000 of the hours must have been as a licensed journeyman. The applicant must also show 576 hours of approved classroom instruction (or the 20,000-hour exemption), pass the exam with 75%, and pay the $200 license fee. W.S. 35-9-126(d) permits a discretionary reciprocal license for any out-of-state license earned by an equal or greater exam, but the department applies reciprocity only to its listed agreement states.
Exam vendor and exam fee are not published on the licensing page (fees are paid to the testing facility; statutory cap $300).
At a glance
- Trade exam
- Required
- Law / code exam
- Not required
- Out-of-state hours
- Count toward eligibility
- Typical processing
- About 15 days
What you must already have
- You must document at least 16,000 hours of qualifying work experience.Eight years in the electrical wiring industry across residential, commercial and industrial work, of which 8,000 hours were as a licensed journeyman electrician
- Held a journeyman electrician license for four years (8,000 hours)
- 576 hours of electrically related classroom instruction from an approved apprenticeship program, or 10 years / 20,000 hours as a licensed journeyman or master approved by the Chief Electrical Inspector
What you'll do to get licensed in Wyoming
- 1Trade exam. Pass the destination's trade exam. Wyoming Master Electrician examination, open book on the current NEC, 75% to pass.
- 2Exam fee. Pay the exam fee. Examination fee paid to the testing facility (amount not published on the licensing page; statutory cap $300).
- 3License fee. Pay the license or certificate fee ($200). Initial Master Electrician license fee paid after uploading the exam pass letter (plus 2.5% card processing fee).
- 4Other. Government-issued ID verification in the eLicense portal, work verification documents and apprenticeship education transcripts.
Published fees on this path total $200, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Trade exam
- Exam fee
How Wyoming licenses master electricians
Wyoming master electrician · “Master Electrician”
Statewide license
Wyoming issues a statewide Master Electrician license through the Department of Fire Prevention and Electrical Safety. To sit for the master exam an applicant documents eight years (16,000 hours) of work in the electrical wiring industry, of which four years (8,000 hours) were as a licensed journeyman, plus 576 hours of approved classroom instruction (or the 20,000-hour exemption), and must score 75% on the open-book NEC exam. The initial license fee is $200; the license runs three years, expiring July 1, and renews for $100 with 16 hours of approved continuing education, 8 of them on the NEC. A master electrician may serve as master of record for only one electrical contractor (W.S. 35-9-126). Wyoming has master-level reciprocity agreements with Idaho, South Dakota and Iowa only.
Why Tennessee has nothing to transfer
Tennessee master electrician
Licensed by cities and counties
Tennessee does not issue a master electrician license. The state-level credential for electrical contracting is a contractor license with the CE (electrical) classification from the Board for Licensing Contractors, which is issued to a business (sole proprietorship, partnership, LLC or corporation) that names a qualifying agent, and which is required for any electrical project of $25,000 or more. To obtain it the qualifying agent passes the Tennessee Business & Law exam and the CE trade exam (Prov), and the business files a reviewed or audited CPA financial statement (or, from July 1, 2026, a surety bond) that sets its monetary limit, proves general liability and workers' compensation insurance, and pays a $250 application fee ($200 biennial renewal). The Board has trade-exam-waiver agreements under which a contractor licensed in Alabama, Louisiana, Mississippi, North Carolina, Ohio, South Carolina or West Virginia, or one who passed the NASCLA electrical exam, skips the CE trade exam but still takes the Business & Law exam and meets every other requirement; the Board stresses that these 'do NOT allow using another state's license in Tennessee'. Master electrician licenses proper exist only at the local level in the jurisdictions that run their own inspection programs: Nashville (Metro Master Electrician, six years of experience), Memphis/Shelby County (Master Electrician, four years as a journeyman), Chattanooga (Class I electrical contractor, three years as a journeyman) and other exempt jurisdictions, each with its own exam and fees and none publishing reciprocity for out-of-state masters. An out-of-state master electrician who only wants to work for an employer needs no state license; to pull permits for small jobs they need the local master license or an LLE where accepted, and to contract for work of $25,000 or more they need the state CE contractor license.
How local licensing works in Tennessee
State CE contractor license (business level). Required statewide for electrical projects of $25,000 and up and accepted by every local jurisdiction for permits, but it is a business license, not a personal master credential. Requirements: qualifying agent (owner, officer or full-time employee) passes the Tennessee Business & Law exam and the Electrical (CE) trade exam administered by Prov; reviewed or audited financial statement less than 12 months old (or a contractors' surety bond at 50% of the requested limit from July 1, 2026) setting a monetary limit of 10 times the lesser of working capital or net worth ($300,000 of each for an unlimited limit); general liability insurance scaled to the limit; workers' compensation or exemption; $250 initial fee, $200 renewal every two years; exam scores valid about two years. Trade exam waiver (the only state reciprocity): a contractor licensed in Alabama, Louisiana, Mississippi, North Carolina, Ohio, South Carolina or West Virginia whose board verifies a comparable electrical exam on the Request for Contractor License Verification form, or who passed the NASCLA Electrical exam, files that verification in place of the CE trade exam score. The Business & Law exam is never waived, applicants with discipline, open complaints or felonies are ineligible, and the waiver cannot be used for the LLE. Arkansas's agreement covers only building classifications, not electrical.
Nashville (Metro Codes and Building Safety). The Mechanical, Plumbing, and Electrical Examiners and Appeals Board issues the Metropolitan Master Electrician certificate. Applicants need six years of experience (an electrical engineering degree may substitute), employer verification letters, a character letter and approval by the Chief Electrical Inspector, then pass the Prov-administered Metro master exam with 70%. The application asks whether the applicant holds a master license in another city or state and how long, but no exam waiver is described. Nashville registers state CE contractors separately.
Memphis / Shelby County (Office of Construction Code Enforcement). The Master Electrician license (Sec. 1305 of the joint electrical code) requires age 24 and either an electrical engineering degree plus two years of installation experience or four certified years as a journeyman; application in person with three industry recommendations, 30-day investigation, exam before the Electrical Code Advisory Board on theory, installation, the NEC and local codes. Fees: exam $150, initial license $100, active renewal $150. A separate Electrical Contractor license ($150 exam, $150 license, $150 registration) must be held by or employ a master; state-certified CE contractors register for $150 instead of testing. No reciprocity provision appears in the code.
Chattanooga (Land Development Office). The Class I electrical license is the contractor/master credential: three or more years as a journeyman or plant electrician (or three years as a Class II residential contractor, a prior Class I license, a Tennessee PE license, or equivalent), city examination, $415 per two-year term. A Board of Electrical Examiners oversees testing; no reciprocity is mentioned.
Knoxville (Plans Review & Inspections). Knoxville is on the state's exempt list and requires a city registration to pull permits; a state CE contractor registers directly. Details of Knoxville's own electrical contractor/master exam and fees are not published on the pages found (865-215-4311).
Out-of-state holders. No Tennessee city or the state endorses another state's master license as such. The realistic paths are: (1) obtain the state CE contractor license, using the trade-exam waiver if licensed in AL, LA, MS, NC, OH, SC or WV or NASCLA-tested, which every jurisdiction accepts; or (2) apply for the local master license in each exempt jurisdiction where you will work, documenting the experience required there and passing the local exam.
- Nashville / Davidson County (Metro Codes and Building Safety)
- Memphis / Shelby County (Office of Construction Code Enforcement)
- Knoxville (Plans Review & Inspections)
- Chattanooga (Land Development Office)
- Hamilton County
- Clarksville
- Murfreesboro
- Franklin
- Jackson
- Kingsport
Common questions
- Do I have to take the Wyoming master electrician exam if I'm licensed in Tennessee?
- Yes. Wyoming requires the trade exam on this path.
- What does it cost to get a Wyoming master electrician license from Tennessee?
- Published fees on this path total $200, not counting exam vendor fees or bonds.
- Do my Tennessee work hours count in Wyoming?
- Yes. Documented out-of-state experience counts toward Wyoming's eligibility requirements.
- How long does the application take?
- The board's published or typical processing time is about 15 days.
- Does it work the other way, from Wyoming to Tennessee?
- Not necessarily. Reciprocity is directed. Going from Wyoming to Tennessee, the mechanism is not applicable.
Sources
- Wyoming Statutes Title 35, Chapter 9, Article 1 - Department of Fire Prevention and Electrical Safety · W.S. 35-9-126(a), 35-9-126(d), 35-9-129 · Wyoming Legislature · Statute · verified September 15, 202635-9-126(a): applicants for master and journeyman licenses apply to the chief electrical inspector, pass the examination and pay the license fee; a master license expires July 1 and a journeyman license January 1 in the third year after issue; up to 4,000 hours of electrical school credit toward work experience. 35-9-126(d): the department may issue a reciprocal license to an applicant who obtained an out-of-state or foreign license through an examination equal to or exceeding Wyoming's. 35-9-129: fee caps - master $200, journeyman $100, temporary permit $50, examination $300.
- Wyoming State Fire Marshal's Office - Fire Council and Electrical Board · Wyoming Department of Fire Prevention and Electrical Safety · Agency Page · verified September 15, 2026The five-member Electrical Board appointed by the governor adopts the rules for licensing master and journeyman electricians, technicians, apprentices, temporary permits and reciprocal licenses.
- Wyoming State Fire Marshal's Office - Electrical Safety Home Page · Wyoming Department of Fire Prevention and Electrical Safety · Agency Page · verified September 15, 2026Effective April 1, 2025 a 2.5% processing fee (minimum $1) is added to card payments; Wyoming currently enforces the 2023 NEC with the 2026 NEC effective July 1, 2026; links the licensing portal and the statutes and rules.
- Wyoming Department of Fire Prevention and Electrical Safety - Licensing · W.S. 35-9-101 et seq. · Wyoming State Fire Marshal's Office, Electrical Safety Division · Agency Page · verified September 15, 2026The only statewide construction-trade licensing program in Wyoming; the page lists apprentice, low-voltage/limited technician, journeyman and master electrician licenses and electrical/low-voltage contractor licenses. It contains no HVAC, mechanical or refrigeration license. The one HVAC-related state credential is the LM-H Limited Technician license, which covers the electrical wiring of HVAC systems only.
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.