New York to Iowa: journeyman HVAC technician license reciprocity
New York does not issue a statewide journeyman HVAC technician license, so there is nothing to transfer. Here is Iowa's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Out-of-state journeyman (all states): Iowa exam required, licensure by verification for Iowa residents
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
Iowa has no reciprocity agreement for HVAC-refrigeration or mechanical licenses with any state, so every out-of-state journeyman follows the same path. An applicant who has established Iowa residency may apply for licensure by verification under Iowa Code 272C.12 and 481 IAC 430.4: the origin state sends a verification form directly to the board confirming the license is in good standing and was earned by meeting that state's experience requirements and exam, and the applicant provides proof of residency and a criminal history statement, but the board also requires proof of passing the applicable Iowa licensing examination and may issue a temporary license while the applicant takes it. A non-resident applies through the normal exam route: the $35 exam approval application, the Kirkwood-administered journeyperson HVAC/refrigeration exam ($119 per attempt, 75% to pass, approval valid one year), then the post-examination licensure application and a prorated three-year license fee ($180 for a full term). Exam eligibility requires either the U.S. DOL apprenticeship certificate of completion or a master-level license in the same discipline from another jurisdiction; DIAL's pages do not say that an out-of-state journeyman license alone substitutes for the DOL certificate. An Iowa resident arriving from a jurisdiction that did not license HVAC work may instead substitute three years of full-time experience in the last four years under 481 IAC 430.5. EPA Section 608 certification is federal and applies regardless of the Iowa license.
The exam fee is the amount Kirkwood Community College currently charges for every Iowa plumbing and mechanical exam; DIAL's own pages still show older figures. DIAL's published materials do not say whether an out-of-state journeyman license without a DOL apprenticeship certificate satisfies the apprenticeship requirement for a non-resident; ask the board at 866-280-1521. 481 IAC 430.4 makes the verification route residency-dependent. DIAL says to allow up to two weeks for an exam approval application to be processed.
At a glance
- Trade exam
- Required
- Law / code exam
- Not required
- Out-of-state hours
- Count toward eligibility
What you must already have
- Your New York license must be active and in good standing.
- You must have no disciplinary action or unresolved complaints on your record.No revocation, voluntary surrender under investigation, unresolved discipline or pending complaint in any jurisdiction (272C.12(1)(e)-(g); 481 IAC 430.4(3)).
- Your New York license must have been obtained by examination, not by reciprocity or grandfathering.
- Licensure by verification requires established Iowa residency or a military spouse's permanent change of station to Iowa (272C.12(1)(b); 481 IAC 430.4(2)(d))
- Exam eligibility for non-residents: four years as a U.S. DOL-registered apprentice (certificate of completion) or a master-level license in the same discipline from another jurisdiction (Iowa Code 105.18(2)(b); DIAL journey page)
What you'll do to get licensed in Iowa
- 1Application fee. Pay the application fee ($35). Examination approval application fee, per discipline (481 IAC 428.1(4)).
- 2Trade exam. Pass the destination's trade exam. Iowa Journeyperson HVAC/Refrigeration examination administered through Kirkwood Community College; 75% to pass; also required of licensure-by-verification applicants under 481 IAC 430.4(2)(e).
- 3Exam fee. Pay the exam fee ($119). Kirkwood Community College examination fee, per attempt, non-refundable.
- 4License fee. Pay the license or certificate fee ($180). Journey license fee for a full three-year term (July 1, 2026 to June 30, 2029), prorated one-sixth per six-month period for later issuance; same amount for a license by verification.
- 5Application fee. Pay the application fee ($25) (if applicable). Paper application fee if not filed through the online portal.
- 6Other. Hold EPA Section 608 technician certification to handle refrigerant; federal law requires it, but it is not a condition of this state license (if applicable).
Published fees on this path total $334, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Trade exam
- Exam fee · $119
- Other · if applicable
How Iowa licenses journeyman HVAC technicians
Iowa journeyman HVAC technician · “Journeyperson HVAC-Refrigeration”
Statewide license
Issued by Iowa Plumbing and Mechanical Systems Board, Department of Inspections, Appeals, and Licensing (DIAL)
Iowa issues statewide person-held HVAC licenses through the Plumbing and Mechanical Systems Board (PMSB), now housed in the Department of Inspections, Appeals, and Licensing (DIAL); Iowa Code chapter 105 preempts all city and county HVAC licensing. The journey-level credential is the Journeyperson HVAC-Refrigeration license, which covers HVAC and refrigeration work; a broader Journeyperson Mechanical license also covers sheet metal and hydronic work and is issued to anyone who passes both the HVAC-refrigeration and hydronic journeyperson exams. A new applicant needs four years as an apprentice in a U.S. Department of Labor-registered apprenticeship and must pass the Iowa journeyperson exam (75% to pass) administered through Kirkwood Community College. Iowa has no HVAC reciprocity agreement with any state; its only reciprocity agreement is with South Dakota for plumbers. An out-of-state journeyman who moves to Iowa can use licensure by verification, but the board still requires the Iowa discipline exam; a non-resident with only a journeyman license must document the DOL apprenticeship and pass the exam, while a non-resident holding a master-level HVAC license from another jurisdiction may sit the journeyperson exam without the apprenticeship. A limited no-exam Service Technician HVAC Specialty license exists for NATE-certified or trained technicians who only service appliances from the shutoff valve onward. Licenses run on a three-year cycle ending June 30, 2029, and renewal requires eight hours of continuing education per term.
Why New York has nothing to transfer
New York journeyman HVAC technician
Licensed by cities and counties
New York has no statewide HVAC license at any level: the Department of State's Division of Licensing Services regulates 35 occupations and none of them is an HVAC, mechanical or refrigeration trade, and no other state agency licenses HVAC technicians. Journeyman-level HVAC licensing therefore exists only where a local ordinance creates it, and none of the large jurisdictions actually licenses an HVAC journeyman or technician: New York City's Department of Buildings issues no HVAC or mechanical license (its only adjacent person-held credentials are the Oil Burner Equipment Installer license and the FDNY's Q-01 Refrigerating System Operating Engineer certificate, which is an operator credential for permitted refrigeration plants), Buffalo licenses Heating Contractors rather than journeymen, Rochester licenses stationary engineers and refrigeration operators rather than installers, and Westchester, Nassau and Suffolk counties regulate HVAC through home improvement contractor licensing of businesses. A technician arriving with an out-of-state HVAC journeyman license has nothing to transfer it to; they work as an employee of whatever business holds the local contractor or home improvement license, and the only person-held credential they may need is federal EPA Section 608 certification (which the FDNY also requires, at the Universal level, of Q-01 applicants).
How local licensing works in New York
How local licensing works. New York licenses no HVAC workers at the state level, so cities and counties decide for themselves; in practice they license the contracting business (or, in Buffalo, the heating contractor) and leave individual technicians unlicensed.
New York City. The Department of Buildings' license list contains no HVAC or mechanical license; ventilation, air-conditioning and refrigeration installation is done under permits by contractors and their employees without any personal trade license. Two adjacent credentials exist: the DOB Oil Burner Equipment Installer license (Class A any oil-burning equipment, Class B domestic fuel oils 1-4; written exam $585 and practical exam $530, $100 license for three years) and the FDNY Q-01 Certificate of Qualification for Refrigerating System Operating Engineer, which must supervise any refrigerating system that needs an FDNY permit. Q-01 candidates need a high school diploma or GED, EPA Universal Technician Certification, and either a current NYC High Pressure Boiler Operating Engineer license, a Coast Guard marine engineer certificate or a PE license from any state, a 200-hour FDNY-approved refrigeration course, or one year of qualifying plant or service experience in the last three years; the two-part exam costs $60 plus $225 and the certificate renews every three years for $15. Neither credential recognizes out-of-state HVAC licenses.
Buffalo. Under City Code Chapter 238 no person may install, alter, repair, service or replace any heating or process system without a license from the Board of Heating Examiners; the license is the Heating Contractor license (Class I oil, gas or solid fuel; Class II gas or solid fuel; Class III wood-burning fireplaces and stoves), issued to an individual or a firm. There is no journeyman class; workers perform heating work under a licensed heating contractor. See the master level for requirements.
Rochester. Licenses electricians, plumbers and Stationary Engineers and Refrigeration Operators (classes R-4, R-3, R-2 for refrigeration operators, examined through ICC); no HVAC installer license.
Westchester County. Licenses master plumbers and electricians (with a journey-level plumber license) but no HVAC trade; since July 1, 2025 'all HVAC professionals' must be licensed through the Department of Consumer Protection, which is done through the home improvement contractor license of the business ($750 application fee, no exam).
Nassau and Suffolk counties. No HVAC or journeyman license; installation of 'central heating or air conditioning systems' (Nassau) and 'ductwork for heating, ventilation and air-conditioning systems' (Suffolk) is home improvement work requiring the business to hold a county home improvement license, and employees of a licensed contractor are exempt from licensing.
Out-of-state holders. No jurisdiction in New York publishes a reciprocity or endorsement path for out-of-state HVAC journeyman licenses because none issues such a license.
- New York City (Department of Buildings)
- New York City (FDNY Q-01 Refrigerating System Operating Engineer)
- Buffalo (Board of Heating Examiners, Office of Fuel Devices)
- Rochester (Licensed Trades)
- Westchester County (Department of Consumer Protection)
- Nassau County (Office of Consumer Affairs)
- Suffolk County (Consumer Affairs)
Common questions
- Do I have to take the Iowa journeyman HVAC technician exam if I'm licensed in New York?
- Yes. Iowa requires the trade exam on this path.
- What does it cost to get a Iowa journeyman HVAC technician license from New York?
- Published fees on this path total $334, not counting exam vendor fees or bonds.
- Do my New York work hours count in Iowa?
- Yes. Documented out-of-state experience counts toward Iowa's eligibility requirements.
- Does it work the other way, from Iowa to New York?
- Not necessarily. Reciprocity is directed. Going from Iowa to New York, the mechanism is not applicable.
Sources
- EPA Section 608 Technician Certification Requirements · 40 CFR Part 82, Subpart F (Clean Air Act §608) · U.S. Environmental Protection Agency · Other · verified September 15, 2026
- Iowa Code Chapter 105 - Plumbers, Mechanical Professionals, and Contractors (2026) · Iowa Code 105.2, 105.17, 105.18, 105.19, 105.20, 105.21 · Iowa Legislature · Statute · verified September 23, 2026
- Iowa Code §272C.12 - Licensure of persons licensed in other jurisdictions · Iowa Code §272C.12 · Iowa Legislature · Statute · verified September 15, 2026
- DIAL - Plumbing & Mechanical Systems Examination · Iowa Department of Inspections, Appeals, and Licensing (DIAL), Plumbing and Mechanical Systems Board · Agency Page · verified September 23, 2026
- DIAL - Plumbing & Mechanical Systems License Period & Fees · 481 IAC ch. 428 · Iowa Department of Inspections, Appeals, and Licensing (DIAL), Plumbing and Mechanical Systems Board · Agency Page · verified September 23, 2026
- DIAL - Journey Level License (plumbing, mechanical, HVAC, refrigeration, sheet metal, hydronic) · Iowa Department of Inspections, Appeals, and Licensing (DIAL), Plumbing and Mechanical Systems Board · Agency Page · verified September 23, 2026
- DIAL - Plumbing & Mechanical Systems Licensure (program home) · Iowa Department of Inspections, Appeals, and Licensing (DIAL), Plumbing and Mechanical Systems Board · Agency Page · verified September 23, 2026
- DIAL - Post-Examination Licensure · Iowa Department of Inspections, Appeals, and Licensing (DIAL), Plumbing and Mechanical Systems Board · Agency Page · verified September 23, 2026
- DIAL - Service Technician HVAC Specialty License · Iowa Department of Inspections, Appeals, and Licensing (DIAL), Plumbing and Mechanical Systems Board · Agency Page · verified September 15, 2026
- Iowa Administrative Code 481 Chapter 428 - Plumbing and Mechanical Systems Board Licensure Fees · 481 IAC 428.1 · Iowa Department of Inspections, Appeals, and Licensing · Admin Rule · verified September 23, 2026
- Iowa Administrative Code 481 Chapter 429 - Plumbing and Mechanical Systems Board Application, Licensure, and Examination · 481 IAC 429.2, 429.6 · Iowa Department of Inspections, Appeals, and Licensing · Admin Rule · verified September 23, 2026
- Iowa Administrative Code 481 Chapter 430 - Plumbing and Mechanical Systems Board Alternative Licensure Pathways · 481 IAC 430.3, 430.4, 430.5 · Iowa Department of Inspections, Appeals, and Licensing · Admin Rule · verified September 23, 2026
- Kirkwood Community College - State Disciplines (Iowa plumbing and mechanical examinations) · Kirkwood Community College, the Plumbing and Mechanical Systems Board's contracted exam provider · Form · verified September 23, 2026
- Iowa Plumbing and Mechanical Systems Board - Application for License by Reciprocity (Reciprocity App 03/2020) · Iowa Plumbing and Mechanical Systems Board · Form · verified September 15, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.