Wyoming to Iowa: journeyman HVAC technician license reciprocity
Wyoming does not issue a statewide journeyman HVAC technician license, so there is nothing to transfer. Here is Iowa's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Out-of-state journeyman (all states): Iowa exam required, licensure by verification for Iowa residents
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
Iowa has no reciprocity agreement for HVAC-refrigeration or mechanical licenses with any state, so every out-of-state journeyman follows the same path. An applicant who has established Iowa residency may apply for licensure by verification under Iowa Code 272C.12 and 481 IAC 430.4: the origin state sends a verification form directly to the board confirming the license is in good standing and was earned by meeting that state's experience requirements and exam, and the applicant provides proof of residency and a criminal history statement, but the board also requires proof of passing the applicable Iowa licensing examination and may issue a temporary license while the applicant takes it. A non-resident applies through the normal exam route: the $35 exam approval application, the Kirkwood-administered journeyperson HVAC/refrigeration exam ($119 per attempt, 75% to pass, approval valid one year), then the post-examination licensure application and a prorated three-year license fee ($180 for a full term). Exam eligibility requires either the U.S. DOL apprenticeship certificate of completion or a master-level license in the same discipline from another jurisdiction; DIAL's pages do not say that an out-of-state journeyman license alone substitutes for the DOL certificate. An Iowa resident arriving from a jurisdiction that did not license HVAC work may instead substitute three years of full-time experience in the last four years under 481 IAC 430.5. EPA Section 608 certification is federal and applies regardless of the Iowa license.
The exam fee is the amount Kirkwood Community College currently charges for every Iowa plumbing and mechanical exam; DIAL's own pages still show older figures. DIAL's published materials do not say whether an out-of-state journeyman license without a DOL apprenticeship certificate satisfies the apprenticeship requirement for a non-resident; ask the board at 866-280-1521. 481 IAC 430.4 makes the verification route residency-dependent. DIAL says to allow up to two weeks for an exam approval application to be processed.
At a glance
- Trade exam
- Required
- Law / code exam
- Not required
- Out-of-state hours
- Count toward eligibility
What you must already have
- Your Wyoming license must be active and in good standing.
- You must have no disciplinary action or unresolved complaints on your record.No revocation, voluntary surrender under investigation, unresolved discipline or pending complaint in any jurisdiction (272C.12(1)(e)-(g); 481 IAC 430.4(3)).
- Your Wyoming license must have been obtained by examination, not by reciprocity or grandfathering.
- Licensure by verification requires established Iowa residency or a military spouse's permanent change of station to Iowa (272C.12(1)(b); 481 IAC 430.4(2)(d))
- Exam eligibility for non-residents: four years as a U.S. DOL-registered apprentice (certificate of completion) or a master-level license in the same discipline from another jurisdiction (Iowa Code 105.18(2)(b); DIAL journey page)
What you'll do to get licensed in Iowa
- 1Application fee. Pay the application fee ($35). Examination approval application fee, per discipline (481 IAC 428.1(4)).
- 2Trade exam. Pass the destination's trade exam. Iowa Journeyperson HVAC/Refrigeration examination administered through Kirkwood Community College; 75% to pass; also required of licensure-by-verification applicants under 481 IAC 430.4(2)(e).
- 3Exam fee. Pay the exam fee ($119). Kirkwood Community College examination fee, per attempt, non-refundable.
- 4License fee. Pay the license or certificate fee ($180). Journey license fee for a full three-year term (July 1, 2026 to June 30, 2029), prorated one-sixth per six-month period for later issuance; same amount for a license by verification.
- 5Application fee. Pay the application fee ($25) (if applicable). Paper application fee if not filed through the online portal.
- 6Other. Hold EPA Section 608 technician certification to handle refrigerant; federal law requires it, but it is not a condition of this state license (if applicable).
Published fees on this path total $334, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Trade exam
- Exam fee · $119
- Other · if applicable
How Iowa licenses journeyman HVAC technicians
Iowa journeyman HVAC technician · “Journeyperson HVAC-Refrigeration”
Statewide license
Issued by Iowa Plumbing and Mechanical Systems Board, Department of Inspections, Appeals, and Licensing (DIAL)
Iowa issues statewide person-held HVAC licenses through the Plumbing and Mechanical Systems Board (PMSB), now housed in the Department of Inspections, Appeals, and Licensing (DIAL); Iowa Code chapter 105 preempts all city and county HVAC licensing. The journey-level credential is the Journeyperson HVAC-Refrigeration license, which covers HVAC and refrigeration work; a broader Journeyperson Mechanical license also covers sheet metal and hydronic work and is issued to anyone who passes both the HVAC-refrigeration and hydronic journeyperson exams. A new applicant needs four years as an apprentice in a U.S. Department of Labor-registered apprenticeship and must pass the Iowa journeyperson exam (75% to pass) administered through Kirkwood Community College. Iowa has no HVAC reciprocity agreement with any state; its only reciprocity agreement is with South Dakota for plumbers. An out-of-state journeyman who moves to Iowa can use licensure by verification, but the board still requires the Iowa discipline exam; a non-resident with only a journeyman license must document the DOL apprenticeship and pass the exam, while a non-resident holding a master-level HVAC license from another jurisdiction may sit the journeyperson exam without the apprenticeship. A limited no-exam Service Technician HVAC Specialty license exists for NATE-certified or trained technicians who only service appliances from the shutoff valve onward. Licenses run on a three-year cycle ending June 30, 2029, and renewal requires eight hours of continuing education per term.
Why Wyoming has nothing to transfer
Wyoming journeyman HVAC technician
Licensed by cities and counties
Wyoming has no statewide HVAC, refrigeration or mechanical license at any level; the only state trade-licensing program is the Department of Fire Prevention and Electrical Safety's electrician program, whose closest credential is the LM-H Limited Technician license for the electrical wiring of HVAC systems. Licensing of HVAC journeymen exists only where a city ordinance creates it. Cheyenne, Casper, Laramie and Gillette each license HVAC/mechanical journeymen (and apprentices) individually, all built on the ICC National Standard mechanical exams (Casper names G31-N/G29-N) and four years of documented apprentice-level experience, while Rock Springs only registers contractors with proof of insurance and licenses no individuals. None of these cities publishes reciprocity with other states' HVAC licenses: Casper's and Gillette's reciprocity provisions apply only to other Wyoming jurisdictions, Cheyenne's Board may grant reciprocity 'as the Board determines appropriate' and treats even in-state licenses case by case, and Laramie's building official may issue a certificate without examination to the holder of a certificate from any other governmental agency whose exam is judged at least equal. In practice an out-of-state journeyman brings their ICC mechanical exam certificate (or takes it through Pearson VUE) and applies in each city where they will work. EPA Section 608 certification is federal and required everywhere refrigerants are handled; Cheyenne and Gillette require it expressly for refrigeration licenses.
How local licensing works in Wyoming
How local licensing works. Wyoming licenses electricians at the state level but not HVAC, refrigeration, sheet metal or plumbing workers, so HVAC licensing is entirely a matter of city ordinance and varies by city. The state's reciprocity statute cited by the cities covers only licenses from other Wyoming jurisdictions.
Cheyenne. The Contractor Licensing Board licenses HVAC and refrigeration contractors (Class C1, tested) and requires every employee on an HVAC or refrigeration job site to hold a master, journeyman or apprentice license. A journeyman must document 4 years/8,000 hours as a licensed apprentice (or certified equivalent training) with third-party verification and pass a current ICC, NICET or NASCLA exam from the Board's list (paid to the testing agency); a residential plumbing/mechanical journeyman needs 2 years/4,000 hours. Fees: $50 application plus $30 initial, $15 renewal; apprentices $25 + $25. Refrigeration applicants must submit EPA Type II, III or Universal certification. A 30-day temporary work authorization is available to trade employees registered for the exam. Reciprocity (3.3.2): the Board may grant reciprocity with other jurisdictions as it determines appropriate and may accept a test exceeding the published exams from someone holding a current equivalent license elsewhere, but no partner list is published.
Casper. The Community Development Department issues Mechanical Journeyman licenses ($25 new, $15 renewal) to applicants who show completion of a federally recognized mechanical apprenticeship or the equivalent of four years in a Casper-licensed mechanical shop and proof of passing ICC G31-N, G29-N or equivalent; applications with notarized experience affidavits and exam proof go to the Chief Building Official, and the fee and insurance follow approval. Reciprocal licenses ($50/$25) exist only for holders of a current license from another Wyoming jurisdiction with comparable testing.
Laramie. Code Administration issues journeyman, master and apprentice certificates of qualification in mechanical, refrigeration and gas service; a mechanical journeyman needs 4 years as an apprentice (refrigeration and gas service 3) and passes the building official's exam (ICC-based, 2024 cycle; $5 application fee per exam). In lieu of the exam the building official may issue a certificate to anyone presenting a valid certificate from any other governmental agency whose exam the board of examiners considers at least equal, which is the only city provision that can reach an out-of-state license. Applications are filed through the Civic Access portal.
Gillette. Class D HVAC contractors must employ a Master of Record, and all master, journeyman and apprentice HVAC technicians are licensed individually by the Building Inspection Division. A Journeyman HVAC Mechanical license requires four years of approved experience and passing ICC exam results ($25 annual); apprentices need thirty days with a Gillette-licensed HVAC contractor ($5). Journeyman refrigeration technicians additionally need ESCO/EPA 608 certification. Since July 1, 2024 the Board of Examiners grants fee-free reciprocity only to active licenses from other Wyoming local governments; proof of the ICC mechanical exam satisfies all testing.
Rock Springs. Contractors register with the Building Inspection Office ($125, certificate of insurance); no individual HVAC licenses or exams exist.
Out-of-state holders. No Wyoming city publishes a reciprocity or endorsement path for another state's HVAC journeyman license. The portable credential is the ICC National Standard mechanical exam (Journeyman G31-N or Master G29-N), which Cheyenne, Casper, Laramie and Gillette all accept; an out-of-state journeyman who already holds an ICC certificate can generally apply directly, and one who tested on a state-specific exam should expect to take the ICC exam or, in Laramie, ask the board of examiners to treat the origin exam as equal.
Common questions
- Do I have to take the Iowa journeyman HVAC technician exam if I'm licensed in Wyoming?
- Yes. Iowa requires the trade exam on this path.
- What does it cost to get a Iowa journeyman HVAC technician license from Wyoming?
- Published fees on this path total $334, not counting exam vendor fees or bonds.
- Do my Wyoming work hours count in Iowa?
- Yes. Documented out-of-state experience counts toward Iowa's eligibility requirements.
- Does it work the other way, from Iowa to Wyoming?
- Not necessarily. Reciprocity is directed. Going from Iowa to Wyoming, the mechanism is not applicable.
Sources
- EPA Section 608 Technician Certification Requirements · 40 CFR Part 82, Subpart F (Clean Air Act §608) · U.S. Environmental Protection Agency · Other · verified September 15, 2026
- Iowa Code Chapter 105 - Plumbers, Mechanical Professionals, and Contractors (2026) · Iowa Code 105.2, 105.17, 105.18, 105.19, 105.20, 105.21 · Iowa Legislature · Statute · verified September 23, 2026
- Iowa Code §272C.12 - Licensure of persons licensed in other jurisdictions · Iowa Code §272C.12 · Iowa Legislature · Statute · verified September 15, 2026
- DIAL - Plumbing & Mechanical Systems Examination · Iowa Department of Inspections, Appeals, and Licensing (DIAL), Plumbing and Mechanical Systems Board · Agency Page · verified September 23, 2026
- DIAL - Plumbing & Mechanical Systems License Period & Fees · 481 IAC ch. 428 · Iowa Department of Inspections, Appeals, and Licensing (DIAL), Plumbing and Mechanical Systems Board · Agency Page · verified September 23, 2026
- DIAL - Journey Level License (plumbing, mechanical, HVAC, refrigeration, sheet metal, hydronic) · Iowa Department of Inspections, Appeals, and Licensing (DIAL), Plumbing and Mechanical Systems Board · Agency Page · verified September 23, 2026
- DIAL - Plumbing & Mechanical Systems Licensure (program home) · Iowa Department of Inspections, Appeals, and Licensing (DIAL), Plumbing and Mechanical Systems Board · Agency Page · verified September 23, 2026
- DIAL - Post-Examination Licensure · Iowa Department of Inspections, Appeals, and Licensing (DIAL), Plumbing and Mechanical Systems Board · Agency Page · verified September 23, 2026
- DIAL - Service Technician HVAC Specialty License · Iowa Department of Inspections, Appeals, and Licensing (DIAL), Plumbing and Mechanical Systems Board · Agency Page · verified September 15, 2026
- Iowa Administrative Code 481 Chapter 428 - Plumbing and Mechanical Systems Board Licensure Fees · 481 IAC 428.1 · Iowa Department of Inspections, Appeals, and Licensing · Admin Rule · verified September 23, 2026
- Iowa Administrative Code 481 Chapter 429 - Plumbing and Mechanical Systems Board Application, Licensure, and Examination · 481 IAC 429.2, 429.6 · Iowa Department of Inspections, Appeals, and Licensing · Admin Rule · verified September 23, 2026
- Iowa Administrative Code 481 Chapter 430 - Plumbing and Mechanical Systems Board Alternative Licensure Pathways · 481 IAC 430.3, 430.4, 430.5 · Iowa Department of Inspections, Appeals, and Licensing · Admin Rule · verified September 23, 2026
- Kirkwood Community College - State Disciplines (Iowa plumbing and mechanical examinations) · Kirkwood Community College, the Plumbing and Mechanical Systems Board's contracted exam provider · Form · verified September 23, 2026
- Iowa Plumbing and Mechanical Systems Board - Application for License by Reciprocity (Reciprocity App 03/2020) · Iowa Plumbing and Mechanical Systems Board · Form · verified September 15, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.