Colorado to Oklahoma: master HVAC technician license reciprocity
Colorado does not issue a statewide master HVAC technician license, so there is nothing to transfer. Here is Oklahoma's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Out-of-state master HVAC or mechanical contractor (all states; no published reciprocity partners)
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
No state has a published mechanical contractor reciprocity agreement with Oklahoma, so every out-of-state master HVAC technician or mechanical contractor uses the same route. Under OAC 158:50-9-4.1 an applicant from a state without a reciprocal agreement may request exam equivalency; if the Board has previously approved that jurisdiction's exam, the technical trade portion of the Oklahoma contractor exam is waived on a certified letter showing current good standing, the license category, a 70%+ exam score and no pending discipline, but the Mechanical Business and Law portion must still be passed. CIB does not publish the approved jurisdictions. Otherwise the applicant files the Application for Mechanical Examination with notarized experience affidavits and a copy of the out-of-state license, documents four years of verifiable experience in the category, pays $330, and must pass both portions of the contractor exam through PSI within three years of approval. To activate the license the contractor files a $5,000 bond and $50,000 general liability insurance with CIB; a contractor employed by a single business or public entity may instead file that employer's affidavit. Federal EPA Section 608 certification is required separately to handle refrigerants.
Even where a written contractor reciprocity agreement exists, OAC 158:50-9-6(e) grants only a journeyman license by reciprocity and requires the Oklahoma Business and Law portion before the contractor license issues; since no mechanical agreement is published, no agreement rows are recorded. Some third-party sites claim contractor reciprocity with Texas, Arkansas, Kansas or New Mexico, but no CIB page lists such an agreement.
At a glance
- Trade exam
- Required
- Law / code exam
- Required
- Out-of-state hours
- Count toward eligibility
What you must already have
- You must document at least 8,000 hours of qualifying work experience.Journeyman requirement of three years plus one additional year of verifiable experience in the mechanical trade, at 2,000 hours per year (OAC 158:50-9-1(b)(2)).
- Your Colorado license must be active and in good standing.
- You must have passed a licensing exam in Colorado that the destination considers comparable.
What you'll do to get licensed in Oklahoma
- 1Application fee. Pay the application fee ($30). Contractor application fee, non-refundable (OAC 158:50-9-2(b)).
- 2License fee. Pay the license or certificate fee ($300). Initial contractor license fee, submitted with the application; annual renewal $200.
- 3Trade exam. Pass the destination's trade exam. Technical trade portion of the Oklahoma HVACR Contractor exam (Unlimited or Limited) administered by PSI, 70% to pass; waived only under approved exam equivalency.
- 4Law / code exam. Pass a law, rules, or code exam. Oklahoma Mechanical Business and Law portion of the contractor exam (PSI), 70% to pass; never waived, including for reciprocity applicants.
- 5Exam fee. Pay the exam fee ($184). PSI fee of $92 per examination portion (two portions), non-refundable.
- 6Surety bond. Post a surety bond ($5,000). Continuous $5,000 corporate surety bond payable to the Oklahoma Construction Industries Board, filed before the license is activated (OAC 158:50-5-3(a)).
- 7Insurance. Carry the required insurance ($50,000). Commercial general liability insurance of at least $50,000 with CIB named as certificate holder (OAC 158:50-5-3(b)).
- 8Other. Compliance with workers' compensation insurance laws; the licensed contractor must be a permanent employee, owner, partner or officer of the mechanical firm responsible for its work.
- 9Other. Hold EPA Section 608 technician certification to handle refrigerant; federal law requires it, but it is not a condition of this state license (if applicable).
Published fees on this path total $514, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Trade exam
- Law / code exam
- Exam fee · $184
- Other · if applicable
Surety bond
A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.
- Surety bond · $5,000
Liability insurance
Some states require proof of general liability or workers' compensation coverage at licensing time.
- Insurance · $50,000
How Oklahoma licenses master HVAC technicians
Oklahoma master HVAC technician · “Mechanical Contractor (HVAC/R Unlimited or Limited)”
Statewide license
Issued by Oklahoma Construction Industries Board (CIB), Mechanical Division
Oklahoma has no 'master HVAC' license; its highest person-held HVAC credential is the Mechanical Contractor license, which CIB issues to an individual who passes the two-part contractor exam (technical trade and Mechanical Business and Law, 70% each, $92 per portion). This site maps the HVAC/R Unlimited (or Limited) Mechanical Contractor license to the master level. An applicant needs the journeyman qualifications plus one additional year, so four years (8,000 hours) of verifiable experience in the category, and pays $330 ($30 application plus $300 initial license). After passing, an inactive license issues until the contractor files a $5,000 corporate surety bond and a $50,000 commercial general liability certificate with CIB; an inactive contractor may work as a journeyman. Every mechanical firm must have a licensed contractor associated with and responsible for its work. OAC 158:50-9-6 lets CIB sign contractor reciprocity agreements, under which the applicant would still have to pass the Business and Law portion, but CIB publishes no mechanical partner states. Licenses renew annually ($200) with six hours of continuing education every 36 months.
Why Colorado has nothing to transfer
Colorado master HVAC technician
Licensed by cities and counties
Colorado issues no state master HVAC, mechanical or contractor license; the state licenses only electricians and plumbers, and mechanical licensing is left entirely to cities, counties and regional building departments. The master-level credential is therefore a local supervisor certificate or mechanical contractor license. Denver issues person-held Heating and Ventilating Class A and Class B and Refrigeration Class A and Class B supervisor certificates (6 to 8 years of experience plus the ICC F29 Master Mechanical or F32 Residential Mechanical exam, $60 for three years) and then licenses the mechanical contractor that employs the certificate holder ($250 for three years). The Pikes Peak Regional Building Department licenses Mechanical Contractors in classes H-A commercial, H-B residential and H-C specialty classes on the ICC W29 Master Mechanical, W32 Residential Mechanical or N33 Master Gas Pipe Fitter exams ($100 per license plus a $50 application fee). Neither jurisdiction recognizes out-of-state licenses: Denver does not reciprocate certificates from other counties or states and PPRBD accepts no out-of-state exams, so an arriving master HVAC contractor documents experience locally and passes the ICC exam required by each jurisdiction where they will pull permits.
How local licensing works in Colorado
How local licensing works. With no state mechanical license, each Colorado jurisdiction licenses mechanical contractors under its own code, nearly always on ICC National Standard exams (Pearson VUE, $100 each). PPRBD's notice says that 'often, contractors who work in several areas must pass an exam in each jurisdiction,' although many jurisdictions honor the same ICC certificate.
Denver. Licensing is a two-step process. First the individual obtains a supervisor certificate: Heating and Ventilating Class A (commercial and residential heating, ventilation and cooling up to 50 tons; 8 years of experience, 4 as a journeyman and 4 in design or supervision; ICC #F29 National Standard Master Mechanical), Heating and Ventilating Class B residential only (6 years; ICC #F32 National Standard Residential Mechanical), Heating, Ventilating, A/C residential only (6 years each in heating/ventilation and refrigeration; ICC #F32; refrigeration up to 5 tons), Refrigeration Class A (8 years; ICC #F29) or Refrigeration Class B residential only (6 years; ICC #F32). Experience is documented with notarized letters from employers or clients for projects completed within the last 10 years, and the ICC pass letter is due within 90 days of approval. Supervisor certificates cost $60 and renew every 3 years. Second, the business applies for a mechanical contractor license ($250, 3 years), which must be held by or employ a certificate holder. Denver 'does not accept or reciprocate contractor licenses and/or certificates from other counties or states.'
Colorado Springs and El Paso County (PPRBD). Mechanical Contractor licenses: H-A Mechanical Commercial (ICC W29 Master Mechanical), H-B Mechanical Residential (ICC W32 Residential Mechanical), H-C1 Gas Piping (ICC N33 Master Gas Pipe Fitter), H-C2 Commercial Refrigeration, H-C3 Residential Maintenance/Repair and H-C4 Residential Remodeling, each with a $100 license fee, plus a $50 application fee, references documenting relevant experience, a liability insurance certificate naming PPRBD (minimums in RBC201.7) and a name-based judicial record check; the Licensing Committee and Board of Review act on each application monthly. PPRBD accepts ICC National Standardized or ICC Colorado Standard exams passed on or after January 1, 2016 and 'no out-of-state exams will be accepted.'
Other jurisdictions. Only Denver and PPRBD were verified for this entry; other Colorado cities and counties license mechanical contractors under similar ICC-based ordinances and should be checked individually.
Out-of-state holders. No Colorado jurisdiction checked publishes reciprocity or endorsement for another state's master HVAC or mechanical contractor license. The practical route is to pass the ICC National Standard Master Mechanical (or Residential Mechanical) exam once and apply in each jurisdiction, each of which separately verifies experience.
Common questions
- Do I have to take the Oklahoma master HVAC technician exam if I'm licensed in Colorado?
- Yes. Oklahoma requires the trade exam on this path, plus a law or code exam.
- What does it cost to get a Oklahoma master HVAC technician license from Colorado?
- Published fees on this path total $514, not counting exam vendor fees or bonds.
- Do my Colorado work hours count in Oklahoma?
- Yes. Documented out-of-state experience counts toward Oklahoma's eligibility requirements.
- Does it work the other way, from Oklahoma to Colorado?
- Not necessarily. Reciprocity is directed. Going from Oklahoma to Colorado, the mechanism is not applicable.
Sources
- EPA Section 608 Technician Certification Requirements · 40 CFR Part 82, Subpart F (Clean Air Act §608) · U.S. Environmental Protection Agency · Other · verified September 15, 2026
- Oklahoma CIB - Active Contractor Requirements (bond and insurance) · Oklahoma Construction Industries Board · Agency Page · verified September 23, 2026
- Oklahoma CIB - Mechanical Industry · Oklahoma Construction Industries Board · Agency Page · verified September 23, 2026
- Oklahoma CIB - Mechanical Application Information and Application for Mechanical Examination · Oklahoma Construction Industries Board · Form · verified September 23, 2026
- Oklahoma CIB - Mechanical Contractor · Oklahoma Construction Industries Board · Agency Page · verified September 23, 2026
- Oklahoma CIB - Mechanical Forms · Oklahoma Construction Industries Board · Agency Page · verified September 23, 2026
- Oklahoma Mechanical Licensing Act, 59 O.S. §§ 1850.1 et seq. · 59 O.S. §§ 1850.6, 1850.7, 1850.8, 1850.8A · Oklahoma Construction Industries Board · Statute · verified September 23, 2026
- OAC Title 158, Chapter 50 - Mechanical Industry Regulations (permanent rules effective 10/1/2020) · OAC 158:50-5-2, 158:50-5-3, 158:50-9-1, 158:50-9-2, 158:50-9-4.1, 158:50-9-6, 158:50-9-7 · Oklahoma Construction Industries Board · Admin Rule · verified September 23, 2026
- State of Oklahoma Electrical, Mechanical, Roofing and Plumbing Examinations Candidate Information Bulletin (PSI) · PSI Services for the Oklahoma Construction Industries Board · Form · verified September 23, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.