Minnesota to Virginia: master HVAC technician license reciprocity
Minnesota does not issue a statewide master HVAC technician license, so there is nothing to transfer. Here is Virginia's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Universal License Recognition or exam eligibility for out-of-state masters (all states except Maryland)
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
A master HVAC technician or individually licensed HVAC contractor from any state without a reciprocal agreement applies on the Tradesman Universal License Recognition form (A501-2710ULR) for a 'Licensed Master HVAC (HVA)' license, which DPOR issues without the Virginia trade examination when the current out-of-state license has been held for at least one year, was obtained by examination in a state that also required education, training or experience, and there are no unresolved complaints or pending investigations; every state board that has licensed the applicant must send a Certification of Licensure/Letter of Good Standing dated within 90 days directly to the Tradesmen Program, and DPOR reserves the right to require an exam specific to Virginia law (Va. Code 54.1-205). An applicant whose license is younger than one year, or was not obtained by exam, instead files the Tradesman Exam & License Application ($171.75): a current out-of-state journeyman or master HVAC license is one of the listed qualifications to sit the PSI master exam ($125), so no years of experience need be documented. Both forms charge $171.75, including the technology fee.
A state contractor license issued to a business (for example a Tennessee CMC-C or California C-20) may not satisfy ULR's requirement that the individual hold a license obtained by examination; the qualifying individual should ask DPOR whether the credential is treated as a personal license.
At a glance
- Trade exam
- Waived
- Law / code exam
- Not required
- Out-of-state hours
- Count toward eligibility
What you must already have
- You must have held your Minnesota license for at least 1 year.ULR route only: current out-of-state master HVAC license held at least one year
- Your Minnesota license must have been obtained by examination, not by reciprocity or grandfathering.
- Your Minnesota license must be active and in good standing.
- You must have no disciplinary action or unresolved complaints on your record.
What you'll do to get licensed in Virginia
- 1Application fee. Pay the application fee ($171.75). Tradesman Universal License Recognition application fee (form A501-2710ULR), including the $7.25-per-year technology fee; non-refundable.
- 2Other. Certification of Licensure/Letter of Good Standing from each state board where licensed, sent directly to the Board for Contractors - Tradesmen Program and dated within 90 days.
- 3Law / code exam. Pass a law, rules, or code exam (if applicable). DPOR may require an examination specific to Virginia law under Va. Code 54.1-205.
- 4Trade exam. Pass the destination's trade exam (if applicable). Only for applicants who do not meet the ULR criteria: PSI Virginia master HVAC exam ($125) via the Tradesman Exam & License Application ($171.75), for which an out-of-state journeyman or master license is itself the qualification.
- 5Continuing education. Complete continuing education. Three hours of board-approved International Mechanical Code continuing education each three-year license term.
- 6Contractor license. Hold or obtain a contractor license (if applicable). Class A, B or C Virginia contractor license from the Board for Contractors if contracting for work over $1,000.
- 7Other. Hold EPA Section 608 technician certification to handle refrigerant; federal law requires it, but it is not a condition of this state license (if applicable).
Published fees on this path total $171.75, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Law / code exam · if applicable
- Trade exam · if applicable
- Other · if applicable
Continuing education
Renewals usually need approved CE hours, often on the latest NEC. Reciprocal licensees are rarely exempt.
- Continuing education
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Contractor license · if applicable
How Virginia licenses master HVAC technicians
Virginia master HVAC technician · “Master Heating, Ventilation & Air Conditioning (HVA) Tradesman”
Statewide license
Issued by Virginia Board for Contractors, Tradesmen Program (DPOR)
Virginia issues a statewide Master HVAC tradesman license to individuals through the Board for Contractors' Tradesmen Program at DPOR. Under 18VAC50-30-39 a first-time applicant qualifies for the PSI master exam ($125) with one year of practical experience as a licensed journeyman, three years as a Virginia residential HVAC tradesman, or nine years of verified practical experience in the trade; the application fee on the 2026 form is $171.75 including the technology fee. A current journeyman or master HVAC license from another state is itself an accepted qualification to sit the master exam, and a licensee who has held an out-of-state license for at least one year may apply through Universal License Recognition and receive the master license without the Virginia trade exam. The Board's only HVAC reciprocity agreement is an examination reciprocity agreement with the Maryland HVACR Board covering journeyman and master licenses; the electrical agreements with Alabama, DC, Kentucky, North Carolina, Ohio and West Virginia do not extend to HVAC. The master tradesman license is a personal qualification; contracting for work over $1,000 requires a separate Class A, B or C contractor business license from the same Board. EPA Section 608 certification is required federally to handle refrigerants.
Why Minnesota has nothing to transfer
Minnesota master HVAC technician
Licensed by cities and counties
Minnesota issues no master HVAC, master refrigeration or HVAC contractor license. The only statewide requirement is the $25,000 mechanical contractor bond that a business files with the Department of Labor and Industry (DLI) under Minn. Stat. 326B.197 ($100 filing fee, valid two years) before contracting for gas, heating, ventilation, cooling, air conditioning, fuel burning or refrigeration work; DLI states that there is no state license for mechanical contractors or their employees and that cities may require licensure or a competency card. The master-level credential therefore exists only at the city level: Minneapolis issues Master Warm Air Ventilation and Master Refrigeration Certificates of Competency (four years of experience and education plus an ICC exam) and requires a master card holder behind each HVAC Class A or Refrigeration Systems Installer contractor license; Saint Paul issues Master Warm Air, Ventilation and Refrigeration competency cards and requires one for each Warm Air/Ventilation business trade license; Rochester licenses individual HVAC Master Installers after a city certificate of competency; Bloomington licenses mechanical contractors on a Minneapolis or Saint Paul card or its own test. An out-of-state master HVAC or mechanical contractor license has no state-level recognition and none of these cities publish a path that accepts it; Minneapolis and Saint Paul recognize each other's master cards. Federal EPA Section 608 certification is separately required of anyone handling refrigerants.
How local licensing works in Minnesota
How local licensing works. Minnesota has no state mechanical or HVAC license and no state HVAC board. Under Minn. Stat. 326B.197 a business contracting for gas, heating, ventilation, cooling, air conditioning, fuel burning or refrigeration work files a $25,000 bond with DLI ($100 biennial filing fee); the bond is 'in lieu of all other bonds to any political subdivision' but does not replace city licenses, and DLI tells contractors they 'must comply with local licensing requirements'. Whether an individual must hold a master-level card depends on the city.
Minneapolis. Contractor licenses (HVAC Class A for installing, repairing or cleaning HVAC systems, HVAC Class B for cleaning only, Refrigeration Systems Installer, Gas Fitter) are issued by Business Licenses and Consumer Services and require the State of Minnesota $25,000 bond; the responsible person holds a Master Certificate of Competency under Minneapolis Code Chapter 278. Master Warm Air Ventilation and Master Refrigeration cards require four years (1,600 hours per year) of on-the-job experience and four years (576 hours) of trade-related education, eligibility approval by the Building Official (no fee), the ICC exam at Pearson VUE (80 questions, 75% to pass, $115; the refrigeration master exam is open book with a 3-hour limit) and a $30 card fee per trade. A Saint Paul card is accepted by reciprocity for $30 per trade. Master competency exams for Warm Air/Ventilation are given in January and July; reciprocal master cards are issued on a current Minneapolis card for $24 per trade.
Rochester. An HVAC Contractor license ($125 per year) requires a full-time licensed HVAC Master Installer; the Master Installer license ($60 per year) is issued to the individual after a City of Rochester certificate of competency ($25 per area of competency).
Bloomington. Mechanical contractor licenses (HVAC, gas installer, hot water/steam, oil burner, refrigeration) require a Minneapolis or Saint Paul Certificate of Competency or passing Bloomington's $35 open-book mechanical test on the 2020 Minnesota Mechanical and Fuel Gas Code, plus the DLI bond and a Minnesota tax ID.
Duluth. No city mechanical license; permits are issued to DLI-bonded mechanical contractors.
Out-of-state holders. No Minnesota city reviewed here publishes reciprocity or endorsement for another state's master HVAC or mechanical contractor license. A master arriving from another state can contract statewide by filing the DLI bond, and in Minneapolis, Saint Paul or Rochester must additionally document four years of experience and education and pass that city's master exam (a Minneapolis card then reciprocates to Saint Paul and is accepted in Bloomington).
Common questions
- Do I have to take the Virginia master HVAC technician exam if I'm licensed in Minnesota?
- No. The trade exam is waived on this path.
- How long do I need to have held my Minnesota license?
- At least 1 year before applying.
- What does it cost to get a Virginia master HVAC technician license from Minnesota?
- Published fees on this path total $171.75, not counting exam vendor fees or bonds.
- Do my Minnesota work hours count in Virginia?
- Yes. Documented out-of-state experience counts toward Virginia's eligibility requirements.
- Does it work the other way, from Virginia to Minnesota?
- Not necessarily. Reciprocity is directed. Going from Virginia to Minnesota, the mechanism is not applicable.
Sources
- EPA Section 608 Technician Certification Requirements · 40 CFR Part 82, Subpart F (Clean Air Act §608) · U.S. Environmental Protection Agency · Other · verified September 15, 2026
- 18VAC50-30-100 - Examination fees · 18VAC50-30-100 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 23, 2026
- 18VAC50-30-39 - Qualifications for examination approval for a tradesman license · 18VAC50-30-39 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 23, 2026
- 18VAC50-30-90 - Fees for licensure and certification · 18VAC50-30-90 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 23, 2026
- Virginia Board for Contractors - Reciprocal Licensing/Examination Agreements with Other Jurisdictions · Virginia Board for Contractors (DPOR) · Agreement Document · verified September 17, 2026
- Form A501-2710EXLIC - Tradesman Exam & License Application (v8, 07/01/2026) · Virginia Board for Contractors (DPOR) · Form · verified September 23, 2026
- DPOR Board for Contractors - Tradesman Licensing Information and Application Instructions · Va. Code 54.1-1128 through 54.1-1131 · Virginia Department of Professional and Occupational Regulation · Other · verified September 23, 2026
- Form A501-2710ULR - Tradesman Universal License Recognition Application (v4, 07/01/2026) · Virginia Board for Contractors (DPOR) · Form · verified September 23, 2026
- DPOR Board for Contractors - Tradesmen Program · Virginia Department of Professional and Occupational Regulation · Agency Page · verified September 23, 2026
- Universal License Recognition - Virginia DPOR · Virginia Department of Professional and Occupational Regulation · Agency Page · verified September 17, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.