Do I have to take the Wisconsin master HVAC technician exam if I'm licensed in New York?

Yes. Wisconsin requires the trade exam on this path.

What does it cost to get a Wisconsin master HVAC technician license from New York?

Published fees on this path total $195, not counting exam vendor fees or bonds.

Do my New York work hours count in Wisconsin?

Yes. Documented out-of-state experience counts toward Wisconsin's eligibility requirements.

Does it work the other way, from Wisconsin to New York?

Not necessarily. Reciprocity is directed. Going from Wisconsin to New York, the mechanism is not applicable.

New York to Wisconsin: master HVAC technician license reciprocity

No credit· Start overVerified September 15, 2026· 9 sources

New York does not issue a statewide master HVAC technician license, so there is nothing to transfer. Here is Wisconsin's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

Out-of-state HVAC contractor or master (all states; no Wisconsin reciprocity)

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

Wisconsin has no reciprocity or endorsement path for HVAC credentials from any state; an applicant licensed elsewhere applies for the HVAC Qualifier certification exactly as a new candidate. Out-of-state experience counts: Form 3122 accepts at least 1,000 hours per year for four years of experience supervising or performing the design, installation, servicing or maintenance of HVAC systems wherever it was earned, documented on the Form 3122T experience table with witness signatures, or four years of HVAC-related education, or a combination. The applicant applies in the LicensE portal, pays the $15 application fee and exam fee, is made eligible to test, and must pass the open-book DSPS HVAC Qualifier exam (70% passing score, 4-hour seat time, $95 at Pearson VUE) before paying the $60 certification fee. Wisconsin has no separate law or business exam for the qualifier. A business that will contract for HVAC work must also hold the HVAC Contractor registration ($15 application plus $160 registration fee), which requires no exam.

SPS 305 Table 305.02 lists a $25 examination fee, while DSPS's Pearson VUE schedule lists $95 payable to Pearson VUE for the 4-hour HVAC Qualifier exam; DSPS's trades exam page says exams at Pearson centers carry a marginally higher fee than DSPS-administered sittings. Both figures are recorded. DSPS lists a 4-year renewal cycle for the qualifier; SPS 305 Table 305.07 still shows 2 years.

At a glance

Trade exam: Required
Law / code exam: Not required
Out-of-state hours: Count toward eligibility

What you must already have

You must document at least 4,000 hours of qualifying work experience.At least 1,000 hours per year for at least 4 years of experience in supervising or performing the design, installation, servicing or maintenance of HVAC systems or equipment; four years of HVAC-related schooling, or a combination of experience and education, is accepted instead (SPS 305.71(3)).

What you'll do to get licensed in Wisconsin

1Application fee. Pay the application fee ($15). HVAC Qualifier application fee (SPS 305 Table 305.02), paid in LicensE.
2Exam fee. Pay the exam fee ($25). HVAC Qualifier examination fee under SPS 305 Table 305.02 (DSPS-administered sitting).
3Exam fee. Pay the exam fee ($95). Total candidate fee payable to Pearson VUE for the 4-hour computer-based HVAC Qualifier exam (DSPS 2024 trade exam fee schedule).
4Trade exam. Pass the destination's trade exam. Wisconsin HVAC Qualifier examination (open book, 70% to pass, 4 hours; references limited to SPS 320-325/341/345, SMACNA, ASHRAE Fundamentals, NFPA 54, IBC, IECC, IMC, IFGC and IEBC with Wisconsin amendments).
5License fee. Pay the license or certificate fee ($60). HVAC Qualifier certification fee after passing the exam (SPS 305 Table 305.02); renewal $100 every 4 years.
6Other. EPA Section 608 technician certification (Type I/II/III/Universal) to handle refrigerants; federal, does not expire. SPS 305.70 notes the federal requirement; it is not a DSPS prerequisite for the qualifier exam.
7Business license. Obtain a business license ($175) (if applicable). HVAC Contractor registration for the business that contracts for HVAC work ($15 application fee plus $160 registration fee; renewal $40 every 4 years); no exam.

Published fees on this path total $195, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

Exam fee · $25
Exam fee · $95
Trade exam
Other

Business registration

If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.

Business license · $175 · if applicable

How Wisconsin licenses master HVAC technicians

Wisconsin master HVAC technician · “HVAC Qualifier”

Statewide license

Verified September 15, 2026· 7 sources

Issued by Wisconsin Department of Safety and Professional Services (DSPS), Division of Industry Services

Wisconsin's highest person-held HVAC credential is the HVAC Qualifier certification issued by DSPS under Wis. Stat. 101.178(3) and SPS 305.71, which this file treats as the master level. It is issued to an individual who documents at least 1,000 hours per year for four years of experience supervising or performing the design, installation, servicing or maintenance of HVAC systems (or four years of HVAC-related schooling, or a combination) and passes the open-book DSPS exam (70% to pass, 4 hours, $95 at Pearson VUE); the credential is renewed every four years for $100 with no continuing education. Certification is voluntary: the mandatory credential is the business-level HVAC Contractor registration, but a business that employs a qualifier is a 'certified HVAC business' that no city or village may require to obtain a local certification, license or other approval. DSPS publishes no reciprocity agreements and no licensure-by-endorsement route for HVAC qualifiers; the experience requirement is not restricted to Wisconsin, so out-of-state work counts toward eligibility, but every applicant takes the Wisconsin exam. Federal EPA Section 608 certification is separately required to handle refrigerants.

Moving to Wisconsin Leaving Wisconsin

Why New York has nothing to transfer

New York master HVAC technician

Licensed by cities and counties

Verified September 15, 2026· 22 sources

New York issues no statewide master HVAC, mechanical or HVAC contractor license; the Department of State licenses none of the construction trades, so the master-level credential exists only where a city or county has created one, and most have not. The only examined, person-holdable HVAC license in the state is Buffalo's Heating Contractor license from the Board of Heating Examiners (age 21, two years of heating installation experience, a quarterly written exam, a $10,000 bond, $1,000,000 liability insurance, $50 exam fee and $500 a year), which covers heating and process systems but not air-conditioning-only work. New York City has no HVAC or mechanical contractor license at all (the DOB licenses oil burner installers and the FDNY certifies refrigerating system operating engineers, but installation and service of HVAC systems needs no license), and the suburban counties regulate the trade through home improvement contractor licensing of the business: Westchester has required 'all HVAC professionals' to hold its home improvement license since July 1, 2025 ($750 application, no exam), Nassau's home improvement license ($650 for two years plus $50, five years of experience, no exam) covers central heating and air-conditioning work, and Suffolk's ($200 application and $200 a year, $500,000 insurance, no exam) covers HVAC ductwork. An out-of-state master HVAC license has no state-level recognition and none of these jurisdictions publishes reciprocity for it; a contractor from another state obtains the local business license (or, in Buffalo, sits the heating contractor exam) in each jurisdiction where they will work.

How local licensing works in New York

How local licensing works. With no state HVAC board, each jurisdiction that regulates the trade does so under its own code, usually as a business license with insurance and experience requirements rather than a trade exam. Buffalo is the exception with an examined heating contractor license.

New York City. The Department of Buildings issues no HVAC, mechanical or refrigeration contractor license; mechanical work is done under permits without a trade license, and the general contractor registration ($300 for three years) applies only to builders of one- to three-family homes. Oil-fired equipment must be installed by a DOB-licensed Oil Burner Equipment Installer (Class A or B; written exam $585, practical exam $530, $100 license for three years), and any refrigerating system that needs an FDNY permit must be supervised by a holder of the FDNY Q-01 Refrigerating System Operating Engineer Certificate of Qualification (EPA Universal certification, a 200-hour course or one year of qualifying experience or a boiler engineer, marine engineer or PE license; $60 plus $225 exam fees; three-year renewal $15). Neither recognizes out-of-state HVAC licenses.

Buffalo. City Code Chapter 238 makes it unlawful for any person to install, erect, alter, repair, service, reset or replace any heating or process system without a license from the Board of Heating Examiners; the separate City contractor license 'does not allow for plumbing, heating, cooling or electrical work'. Applicants must be at least 21 and have two years of practical experience installing heating equipment, a recognized school course plus one year, or be a graduate engineer; they submit photo ID, employer letters and a list of twenty completed installations to the Office of Fuel Devices, and if approved sit the Heating Contractor's Examination (offered roughly every three months, covering local ordinances and ASHRAE material). Classes: I (oil, gas or solid fuel), II (gas or solid fuel), III (wood-burning fireplaces and stoves). Fees: $50 non-refundable testing fee, $500 license, $500 annual renewal; a $10,000 bond to the City and certificates of $1,000,000 general liability and workers' compensation insurance are required. The license may be held by an individual, partnership or corporation. No reciprocity provision.

Rochester. Licenses stationary engineers and refrigeration operators (plant operation), electricians and plumbers; no HVAC contractor license.

Westchester County. The June 2025 amendment to the Consumer Protection Code requires 'all HVAC professionals' to be licensed through the Department of Consumer Protection as of July 1, 2025; the vehicle is the county Home Improvement Contractor license ($750 application fee effective January 1, 2026, $100 optional expedite, roughly 60 business days of document verification and background investigation, no exam). The county's examined trade licenses cover only plumbers and electricians.

Nassau County. Contractors installing or replacing 'central heating or air conditioning systems' in residential property need the county Home Improvement license: five years of recent verifiable experience, an establishment in New York State, liability, property damage and workers' compensation insurance, $650 for a two-year license plus a one-time $50 restitution fund contribution, $110 late renewal fee; no exam.

Suffolk County. Home improvement contracting expressly includes 'ductwork for heating, ventilation and air-conditioning systems'; the county Home Improvement license requires public liability and property damage insurance of at least $500,000 per occurrence and workers' compensation, a $200 application fee and $200 annual license fee ($50 temporary 90-day license); employees of licensed contractors are exempt; no exam.

Out-of-state holders. No New York jurisdiction publishes a reciprocity or endorsement path for out-of-state HVAC contractor or master licenses. Buffalo requires its own exam; the counties require their own business license regardless of any license held elsewhere; New York City requires no HVAC license at all.

Moving to New York Leaving New York

Common questions

Do I have to take the Wisconsin master HVAC technician exam if I'm licensed in New York?: Yes. Wisconsin requires the trade exam on this path.
What does it cost to get a Wisconsin master HVAC technician license from New York?: Published fees on this path total $195, not counting exam vendor fees or bonds.
Do my New York work hours count in Wisconsin?: Yes. Documented out-of-state experience counts toward Wisconsin's eligibility requirements.
Does it work the other way, from Wisconsin to New York?: Not necessarily. Reciprocity is directed. Going from Wisconsin to New York, the mechanism is not applicable.

Sources

EPA Section 608 Technician Certification Requirements · 40 CFR Part 82, Subpart F (Clean Air Act §608) · U.S. Environmental Protection Agency · Other · verified September 15, 2026Federal requirement in every state: technicians who maintain, service, repair or dispose of equipment that could release refrigerants into the atmosphere must be certified (Type I small appliances, Type II high-pressure, Type III low-pressure, Universal). Apprentices under direct supervision are exempt. Certification does not expire; the core exam must be proctored for Universal certification. State HVAC boards commonly require it before licensure, but it is not itself a state license.
DSPS Form 3122 - HVAC Qualifier Certification Application Information (Rev. 1/8/2024) · Wis. Admin. Code SPS 305.71 · Wisconsin Department of Safety and Professional Services · Form · verified September 15, 2026Eligibility for the exam: (a) at least 1,000 hours per year for at least 4 years of experience supervising or performing the design, installation, servicing or maintenance of HVAC systems or equipment, documented on Form 3122T with witness signatures; (b) at least 4 years of attendance in a school of mechanical engineering or an accredited college, technical, vocational or apprenticeship HVAC program; or (c) any combination of four years. Applicants apply and pay in LicensE, are made eligible to test after review, and pay another exam fee after a failure. The form has no category for licensure by reciprocity or endorsement and does not restrict experience to Wisconsin. Read with pdftotext after download.
Wisconsin DSPS - HVAC Contractor (registration program page) · Wis. Admin. Code SPS 305.70 · Wisconsin Department of Safety and Professional Services · Agency Page · verified September 15, 2026'No person, entity or business may engage or offer to engage in installing or servicing heating, ventilating or air conditioning equipment unless the person, entity or business holds a registration issued by the Department as a registered HVAC Contractor' (Form 3121). Exemptions: servicing equipment in property the applicant owns, work in an owner-occupied dwelling, and the electrical or plumbing work associated with HVAC. The registration has no exam or experience requirement and no reciprocity provision.
Wisconsin DSPS - HVAC Qualifier Exam Information · Wisconsin Department of Safety and Professional Services · Agency Page · verified September 15, 2026'The exam is open book, and the passing score is 70%.' Allowed references are limited to nine items: SPS 320-325, 341 and 345 with printed notes in one binder, the 2020 SMACNA duct manual, 2013 ASHRAE Fundamentals, 2021 NFPA 54 (gas piping), the 2021 IBC, IECC, IMC, IFGC and IEBC with Wisconsin amendments. HVAC code changes took effect October 1, 2025. No exam waiver for out-of-state credentials is mentioned.
Wisconsin DSPS - HVAC Qualifier (program page) · Wis. Admin. Code SPS 305.71; Wis. Stat. 101.178(3)(c) · Wisconsin Department of Safety and Professional Services · Agency Page · verified September 15, 2026States that 'an individual may obtain ... an HVAC Qualifier certification from the Department relative to the business of installing or servicing heating, ventilating or air conditioning equipment' and that a business using a qualifier is a certified HVAC business that 'may not be required to obtain a local certification, license, or other approval'. Applications go through the LicensE portal (Form 3122). Exams taken on or after May 16, 2018 include the current Commercial Building Code. The page says nothing about reciprocity or out-of-state credentials.
DSPS - Trades Renewal Dates and Fees · Wisconsin Department of Safety and Professional Services · Other · verified September 15, 2026HVAC Qualifier: 4-year credential renewing from date of issuance, renewal fee $100, no CE, reinstatement $200. HVAC Contractor: 4-year registration from date of issuance, renewal $40, reinstatement $200. (SPS 305 Table 305.07 still lists a 2-year term for these credentials; DSPS's current schedule is used here.) Read with pdftotext after download.
DSPS - Pearson VUE Computer-Based Trade Exam Fee Schedule (2024) · Wisconsin Department of Safety and Professional Services · Other · verified September 15, 2026HVAC Qualifier exam: 4 hours seat time, total candidate fee payable to Pearson VUE $95.00. Read with pdftotext after download.
Wis. Admin. Code ch. SPS 305 - Licenses, Certifications and Registrations (Register August 2025) · SPS 305.02 Table 305.02; SPS 305.70; SPS 305.71 · Wisconsin Legislative Reference Bureau · Admin Rule · verified September 15, 2026Table 305.02: HVAC Contractor registration $15 application fee and $160 registration fee; HVAC Qualifier certification $15 application fee, $25 examination fee, $60 certification fee. SPS 305.70: HVAC contractor registration is mandatory for any person, entity or business installing or servicing HVAC equipment and is applied for by the owner, partner or chief executive; a note reminds that federal Section 608 technician certification is required for refrigerant work. SPS 305.71: an individual may obtain an HVAC qualifier certification by meeting the 4-year experience/education standard, passing the exam under SPS 305.09 and paying the certification fee; a business that uses a qualifier is a 'certified HVAC business' that cannot be required to obtain local approval. The chapter contains no reciprocity or credential-by-endorsement provision for HVAC. Read with pdftotext after download.
Wis. Stat. 101.178 - Heating, ventilating and air conditioning contractors (registration and certification) · Wis. Stat. 101.178(2), (3) · Wisconsin State Legislature · Statute · verified September 15, 2026Sub. (2): 'No person may engage in the business of installing or servicing heating, ventilating or air conditioning equipment unless the person registers with the department.' Sub. (3) directs DSPS to establish a voluntary certification program whose applicants must pass a department examination, and bars political subdivisions from requiring their own certification or approval of state-certified HVAC businesses except for local requirements that predate November 1, 1993 (with grandfathering of existing contractors). No reciprocity provision.

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page