Pennsylvania to Wisconsin: master HVAC technician license reciprocity
Pennsylvania does not issue a statewide master HVAC technician license, so there is nothing to transfer. Here is Wisconsin's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Out-of-state HVAC contractor or master (all states; no Wisconsin reciprocity)
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
Wisconsin has no reciprocity or endorsement path for HVAC credentials from any state; an applicant licensed elsewhere applies for the HVAC Qualifier certification exactly as a new candidate. Out-of-state experience counts: Form 3122 accepts at least 1,000 hours per year for four years of experience supervising or performing the design, installation, servicing or maintenance of HVAC systems wherever it was earned, documented on the Form 3122T experience table with witness signatures, or four years of HVAC-related education, or a combination. The applicant applies in the LicensE portal, pays the $15 application fee and exam fee, is made eligible to test, and must pass the open-book DSPS HVAC Qualifier exam (70% passing score, 4-hour seat time, $95 at Pearson VUE) before paying the $60 certification fee. Wisconsin has no separate law or business exam for the qualifier. A business that will contract for HVAC work must also hold the HVAC Contractor registration ($15 application plus $160 registration fee), which requires no exam.
SPS 305 Table 305.02 lists a $25 examination fee, while DSPS's Pearson VUE schedule lists $95 payable to Pearson VUE for the 4-hour HVAC Qualifier exam; DSPS's trades exam page says exams at Pearson centers carry a marginally higher fee than DSPS-administered sittings. Both figures are recorded. DSPS lists a 4-year renewal cycle for the qualifier; SPS 305 Table 305.07 still shows 2 years.
At a glance
- Trade exam
- Required
- Law / code exam
- Not required
- Out-of-state hours
- Count toward eligibility
What you must already have
- You must document at least 4,000 hours of qualifying work experience.At least 1,000 hours per year for at least 4 years of experience in supervising or performing the design, installation, servicing or maintenance of HVAC systems or equipment; four years of HVAC-related schooling, or a combination of experience and education, is accepted instead (SPS 305.71(3)).
What you'll do to get licensed in Wisconsin
- 1Application fee. Pay the application fee ($15). HVAC Qualifier application fee (SPS 305 Table 305.02), paid in LicensE.
- 2Exam fee. Pay the exam fee ($25). HVAC Qualifier examination fee under SPS 305 Table 305.02 (DSPS-administered sitting).
- 3Exam fee. Pay the exam fee ($95). Total candidate fee payable to Pearson VUE for the 4-hour computer-based HVAC Qualifier exam (DSPS 2024 trade exam fee schedule).
- 4Trade exam. Pass the destination's trade exam. Wisconsin HVAC Qualifier examination (open book, 70% to pass, 4 hours; references limited to SPS 320-325/341/345, SMACNA, ASHRAE Fundamentals, NFPA 54, IBC, IECC, IMC, IFGC and IEBC with Wisconsin amendments).
- 5License fee. Pay the license or certificate fee ($60). HVAC Qualifier certification fee after passing the exam (SPS 305 Table 305.02); renewal $100 every 4 years.
- 6Other. EPA Section 608 technician certification (Type I/II/III/Universal) to handle refrigerants; federal, does not expire. SPS 305.70 notes the federal requirement; it is not a DSPS prerequisite for the qualifier exam.
- 7Business license. Obtain a business license ($175) (if applicable). HVAC Contractor registration for the business that contracts for HVAC work ($15 application fee plus $160 registration fee; renewal $40 every 4 years); no exam.
Published fees on this path total $195, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Exam fee · $25
- Exam fee · $95
- Trade exam
- Other
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Business license · $175 · if applicable
How Wisconsin licenses master HVAC technicians
Wisconsin master HVAC technician · “HVAC Qualifier”
Statewide license
Issued by Wisconsin Department of Safety and Professional Services (DSPS), Division of Industry Services
Wisconsin's highest person-held HVAC credential is the HVAC Qualifier certification issued by DSPS under Wis. Stat. 101.178(3) and SPS 305.71, which this file treats as the master level. It is issued to an individual who documents at least 1,000 hours per year for four years of experience supervising or performing the design, installation, servicing or maintenance of HVAC systems (or four years of HVAC-related schooling, or a combination) and passes the open-book DSPS exam (70% to pass, 4 hours, $95 at Pearson VUE); the credential is renewed every four years for $100 with no continuing education. Certification is voluntary: the mandatory credential is the business-level HVAC Contractor registration, but a business that employs a qualifier is a 'certified HVAC business' that no city or village may require to obtain a local certification, license or other approval. DSPS publishes no reciprocity agreements and no licensure-by-endorsement route for HVAC qualifiers; the experience requirement is not restricted to Wisconsin, so out-of-state work counts toward eligibility, but every applicant takes the Wisconsin exam. Federal EPA Section 608 certification is separately required to handle refrigerants.
Why Pennsylvania has nothing to transfer
Pennsylvania master HVAC technician
Licensed by cities and counties
Pennsylvania issues no statewide master HVAC, mechanical or HVAC contractor license; none of the Department of State's licensing boards covers the trade, and the Attorney General's Home Improvement Contractor registration (required of businesses doing residential remodeling work, including HVAC replacement in existing homes) is a no-exam consumer-protection registration rather than a license. The master-level credential exists only in cities that have chosen to license the trade, under names that vary: Pittsburgh's Mechanical/HVAC Trade License (issued to an individual with four years of experience who has passed an ICC National Standard Master Mechanical exam; $120 in 2025, eight CE hours a year), Reading's Master Mechanical Heating Contractor license (two years as a licensed journeyman plus the ICC F29-N Master Mechanical exam; $90), Erie's master Mechanical and HVAC Installer licenses, and Scranton's Master Mechanical Contractor license. Philadelphia and Altoona require only a general contractor license (business-level, insurance and no exam) to pull mechanical permits, and Allentown and Harrisburg publish no HVAC license at all. There is no state-level recognition of an out-of-state master HVAC license, but Pittsburgh accepts any passed ICC master mechanical exam from any code year and, on the License Officer's review, equivalent exams from other states, and Reading issues a reciprocal master license ($190) to holders of an equivalent license from a first-, second- or third-class city or from a state with a state license and equal standards. A master from another state should expect to document experience, present an ICC master mechanical exam score, and apply separately in each city where they will pull permits.
How local licensing works in Pennsylvania
How local licensing works. With no state HVAC board, each Pennsylvania city that licenses the trade does so under its own ordinance. The credential that travels best between them is the ICC National Standard Master Mechanical examination, which Pittsburgh and Reading both use and which Reading's reciprocity practice implicitly relies on.
Philadelphia. No HVAC or mechanical trade license. Mechanical permits must be performed by a business holding the general Contractor License: $126 a year (including a $20 application fee), general liability of $500,000 per occurrence, $300,000 auto liability, workers' compensation, a Commercial Activity License and tax ID, tax compliance, and an OSHA 30 course for supervisors; there is no exam or experience requirement and no out-of-state provision. Ductwork on the job must be done by licensed sheet metal technicians or apprentices employed by the contractor. Businesses working only on existing one- or two-family homes may register as home improvement contractors instead.
Pittsburgh. The Department of Permits, Licenses and Inspections issues the Mechanical/HVAC Trade License to individuals ('Trade Licenses are issued to individuals, not to companies'), required to install, erect, enlarge, repair, alter, remove, convert or replace any mechanical system in the city (Pittsburgh Code 741). New applicants provide proof of passing the City-proctored Master Mechanical exam or an ICC Standard Master Mechanical exam for any code year, and a resume or employer statement showing four or more years of practical experience (notarized statement if self-employed). PLI's rules state that 'equivalent certification testing programs from states other than Pennsylvania shall be accepted as proof of compliance of the testing requirements upon review and determination of equivalence by the License Officer'. The 2025 fee is $120 (initial and renewal); licenses expire 365 days after issue and renewal requires eight hours of continuing education in the prior twelve months. Insurance ($1,000,000 per occurrence / $2,000,000 aggregate general liability plus workers' compensation) is not needed at application but must be on file before any permit is issued. Applications go through OneStopPGH.
Reading. The Master Mechanical Heating Contractor license ($90 a year) requires a valid mechanical journeyman license, at least two years employed as a mechanical journeyman by a registered mechanical contractor, and a passing ICC F29-N Master Mechanical exam (or its successor). A reciprocal master license ($190, including a one-time reciprocation fee and the annual fee) may be issued to the holder of an equivalent license from a first-, second- or third-class U.S. city issued by an equivalent board of examiners with standards equal to Reading's; the applicant attaches the other jurisdiction's current requirements. As of 7/7/2023 Reading lists reciprocity with Harrisburg, Philadelphia, Scranton, Lancaster and Pittsburgh and with 'most, if not all, surrounding states with a state license'.
Erie. Master licenses are required for Mechanical and HVAC Installers, with a separate Refrigeration license, and 'Only Master License holders are able to obtain a permit'; applications are reviewed by the Trades Licensing Board, which also handles temporary licenses. The ordinance defines the Master Mechanical Contractor as one who contracts to install, erect, alter, extend, maintain or repair heating and ventilation, air-conditioning and refrigeration systems, process piping and sheet metal work. Fees, insurance and any reciprocity provisions could not be opened.
Scranton. Issues a Master Mechanical Contractor license through a combined master electrical/mechanical/plumbing/general contractor application; the application's terms could not be opened. Reading treats Scranton as a reciprocal city.
Altoona. HVAC contractors need a city business license, and for commercial work a City of Altoona Contractor's License with liability and workers' compensation insurance; residential work requires only the state Home Improvement Contractor registration.
Allentown and Harrisburg. Neither publishes an HVAC or mechanical license (Allentown licenses electricians, plumbers and sheet metal workers; Harrisburg licenses electricians, plumbers and low-voltage installers).
Out-of-state holders. Pittsburgh's acceptance of any ICC master mechanical exam (and, on review, equivalent out-of-state exams) and Reading's reciprocal license are the only published accommodations; neither waives the experience documentation or local fees. Everywhere else the out-of-state license is irrelevant and the contractor obtains the local business-level license.
- Philadelphia (Department of Licenses and Inspections)
- Pittsburgh (Department of Permits, Licenses and Inspections)
- Reading (Building and Trades)
- Erie (Bureau of Building Standards and Safety)
- Scranton (Code Enforcement)
- Altoona (Codes and Inspections)
- Allentown (Building Standards and Safety)
- Harrisburg (Bureau of Codes)
Common questions
- Do I have to take the Wisconsin master HVAC technician exam if I'm licensed in Pennsylvania?
- Yes. Wisconsin requires the trade exam on this path.
- What does it cost to get a Wisconsin master HVAC technician license from Pennsylvania?
- Published fees on this path total $195, not counting exam vendor fees or bonds.
- Do my Pennsylvania work hours count in Wisconsin?
- Yes. Documented out-of-state experience counts toward Wisconsin's eligibility requirements.
- Does it work the other way, from Wisconsin to Pennsylvania?
- Not necessarily. Reciprocity is directed. Going from Wisconsin to Pennsylvania, the mechanism is not applicable.
Sources
- EPA Section 608 Technician Certification Requirements · 40 CFR Part 82, Subpart F (Clean Air Act §608) · U.S. Environmental Protection Agency · Other · verified September 15, 2026Federal requirement in every state: technicians who maintain, service, repair or dispose of equipment that could release refrigerants into the atmosphere must be certified (Type I small appliances, Type II high-pressure, Type III low-pressure, Universal). Apprentices under direct supervision are exempt. Certification does not expire; the core exam must be proctored for Universal certification. State HVAC boards commonly require it before licensure, but it is not itself a state license.
- DSPS Form 3122 - HVAC Qualifier Certification Application Information (Rev. 1/8/2024) · Wis. Admin. Code SPS 305.71 · Wisconsin Department of Safety and Professional Services · Form · verified September 15, 2026Eligibility for the exam: (a) at least 1,000 hours per year for at least 4 years of experience supervising or performing the design, installation, servicing or maintenance of HVAC systems or equipment, documented on Form 3122T with witness signatures; (b) at least 4 years of attendance in a school of mechanical engineering or an accredited college, technical, vocational or apprenticeship HVAC program; or (c) any combination of four years. Applicants apply and pay in LicensE, are made eligible to test after review, and pay another exam fee after a failure. The form has no category for licensure by reciprocity or endorsement and does not restrict experience to Wisconsin. Read with pdftotext after download.
- Wisconsin DSPS - HVAC Contractor (registration program page) · Wis. Admin. Code SPS 305.70 · Wisconsin Department of Safety and Professional Services · Agency Page · verified September 15, 2026'No person, entity or business may engage or offer to engage in installing or servicing heating, ventilating or air conditioning equipment unless the person, entity or business holds a registration issued by the Department as a registered HVAC Contractor' (Form 3121). Exemptions: servicing equipment in property the applicant owns, work in an owner-occupied dwelling, and the electrical or plumbing work associated with HVAC. The registration has no exam or experience requirement and no reciprocity provision.
- Wisconsin DSPS - HVAC Qualifier Exam Information · Wisconsin Department of Safety and Professional Services · Agency Page · verified September 15, 2026'The exam is open book, and the passing score is 70%.' Allowed references are limited to nine items: SPS 320-325, 341 and 345 with printed notes in one binder, the 2020 SMACNA duct manual, 2013 ASHRAE Fundamentals, 2021 NFPA 54 (gas piping), the 2021 IBC, IECC, IMC, IFGC and IEBC with Wisconsin amendments. HVAC code changes took effect October 1, 2025. No exam waiver for out-of-state credentials is mentioned.
- Wisconsin DSPS - HVAC Qualifier (program page) · Wis. Admin. Code SPS 305.71; Wis. Stat. 101.178(3)(c) · Wisconsin Department of Safety and Professional Services · Agency Page · verified September 15, 2026States that 'an individual may obtain ... an HVAC Qualifier certification from the Department relative to the business of installing or servicing heating, ventilating or air conditioning equipment' and that a business using a qualifier is a certified HVAC business that 'may not be required to obtain a local certification, license, or other approval'. Applications go through the LicensE portal (Form 3122). Exams taken on or after May 16, 2018 include the current Commercial Building Code. The page says nothing about reciprocity or out-of-state credentials.
- DSPS - Trades Renewal Dates and Fees · Wisconsin Department of Safety and Professional Services · Other · verified September 15, 2026HVAC Qualifier: 4-year credential renewing from date of issuance, renewal fee $100, no CE, reinstatement $200. HVAC Contractor: 4-year registration from date of issuance, renewal $40, reinstatement $200. (SPS 305 Table 305.07 still lists a 2-year term for these credentials; DSPS's current schedule is used here.) Read with pdftotext after download.
- DSPS - Pearson VUE Computer-Based Trade Exam Fee Schedule (2024) · Wisconsin Department of Safety and Professional Services · Other · verified September 15, 2026HVAC Qualifier exam: 4 hours seat time, total candidate fee payable to Pearson VUE $95.00. Read with pdftotext after download.
- Wis. Admin. Code ch. SPS 305 - Licenses, Certifications and Registrations (Register August 2025) · SPS 305.02 Table 305.02; SPS 305.70; SPS 305.71 · Wisconsin Legislative Reference Bureau · Admin Rule · verified September 15, 2026Table 305.02: HVAC Contractor registration $15 application fee and $160 registration fee; HVAC Qualifier certification $15 application fee, $25 examination fee, $60 certification fee. SPS 305.70: HVAC contractor registration is mandatory for any person, entity or business installing or servicing HVAC equipment and is applied for by the owner, partner or chief executive; a note reminds that federal Section 608 technician certification is required for refrigerant work. SPS 305.71: an individual may obtain an HVAC qualifier certification by meeting the 4-year experience/education standard, passing the exam under SPS 305.09 and paying the certification fee; a business that uses a qualifier is a 'certified HVAC business' that cannot be required to obtain local approval. The chapter contains no reciprocity or credential-by-endorsement provision for HVAC. Read with pdftotext after download.
- Wis. Stat. 101.178 - Heating, ventilating and air conditioning contractors (registration and certification) · Wis. Stat. 101.178(2), (3) · Wisconsin State Legislature · Statute · verified September 15, 2026Sub. (2): 'No person may engage in the business of installing or servicing heating, ventilating or air conditioning equipment unless the person registers with the department.' Sub. (3) directs DSPS to establish a voluntary certification program whose applicants must pass a department examination, and bars political subdivisions from requiring their own certification or approval of state-certified HVAC businesses except for local requirements that predate November 1, 1993 (with grandfathering of existing contractors). No reciprocity provision.
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.