LicensebyState

Kansas to Utah: journeyman plumber license reciprocity

No credit· Start overVerified September 16, 2026· 8 sources

Kansas does not issue a statewide journeyman plumber license, so there is nothing to transfer. Here is Utah's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

Out-of-state applicants without an equivalent license (standard route with out-of-state experience credit)

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

If the origin jurisdiction is gray on DOPL's Endorsement to Utah: Journeyman Plumber map (California, Nevada, Arizona, Wyoming, Nebraska, Kansas, Missouri, Mississippi, Tennessee, North Carolina, South Carolina, Florida, Ohio, Pennsylvania and New York as of the 7/1/2020 map), the applicant must meet Utah's standard journeyman qualifications: completion of an approved apprenticeship program of at least 576 classroom hours plus 8,000 hours of licensed plumbing experience under a licensed journeyman or master, or 16,000 hours without the program. Hours earned outside Utah count when documented on the Verification of Plumbing Experience form by the employer together with official verification of the applicant's license from the jurisdiction where the hours were obtained; the map says city, county or non-equivalent state licenses 'may be used to assist with documentation of compliance with some Utah qualifications'. Since January 19, 2026 first-time candidates attach the experience form (and, for out-of-state trade-program graduates, official transcripts) to their Prov exam registration; no DOPL pre-approval is needed. The applicant then passes the Utah Plumber Written Exam and the Utah Plumber Practical Exam through Prov, and submits the DOPL application with the $116 fee after passing.

Hour thresholds conflict between DOPL pages: the apply page and the v20260420 application require 576 classroom hours plus 8,000 apprentice hours (or 16,000), while the Exam Information page lists testing eligibility as '7 semesters or the competency exam equivalence; and 6,000 hours' (or 16,000) and the 2020 map describes 4 years in a program or 8 years outside one. The 8,000-hour figure from the current application is used here.

At a glance

Trade exam
Required
Law / code exam
Not required
Out-of-state hours
Count toward eligibility

What you must already have

  • You must document at least 8,000 hours of qualifying work experience.8,000 hours as a licensed apprentice under a licensed journeyman or master plumber together with completion of an approved 576-classroom-hour apprenticeship program; otherwise 16,000 hours. At least 2,000 and no more than 3,000 hours may be credited per 12-month period.
  • Hours obtained outside Utah must be supported by official verification of the applicant's license from the jurisdiction where the hours were obtained, in addition to the employer-completed Verification of Plumbing Experience form.

What you'll do to get licensed in Utah

  1. 1Application fee. Pay the application fee ($116). Non-refundable DOPL application-processing fee (application v20260420).
  2. 2Trade exam. Pass the destination's trade exam. Utah Plumber Written (theory) Exam and Utah Plumber Practical Exam, administered by Prov; register directly with Prov and pay exam fees to Prov; pass before submitting the DOPL application.
  3. 3Other. Verification of Plumbing Experience form(s) completed by employers, official apprenticeship transcripts if using the 8,000-hour route, and official out-of-state license verification.
  4. 4Continuing education. Complete continuing education. 12 hours of approved CE per licensing cycle (8 core, 4 core or professional) to renew.

Published fees on this path total $116, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Trade exam

Continuing education

Renewals usually need approved CE hours, often on the latest NEC. Reciprocal licensees are rarely exempt.

  • Continuing education

How Utah licenses journeyman plumbers

Utah journeyman plumber · “Journeyman Plumber

Statewide license

Verified September 16, 2026· 6 sources

Issued by Utah Division of Professional Licensing (DOPL)

Utah issues a statewide Journeyman Plumber license through the Division of Professional Licensing (DOPL) under the Utah Construction Trades Licensing Act (Utah Code 58-55) and Rule R156-55c; DOPL also licenses Apprentice Plumbers, Residential Journeyman Plumbers (residential work only, 6,000 hours plus schooling or 12,000 hours) and Residential Master Plumbers. A new journeyman needs either completion of an approved apprenticeship program (576 classroom hours) plus 8,000 hours of licensed apprentice experience, or 16,000 hours, and must pass the Prov-administered Utah Plumber Written (theory) and Practical exams before applying; the DOPL application fee is $116 and exam fees are paid to Prov. Utah has no signed reciprocity agreements. Instead, under Utah Code 58-1-302 it licenses by endorsement anyone whose license appears in green on DOPL's Endorsement to Utah: Journeyman Plumber map, provided the license has been held at least one year and is active and in good standing; no Utah exam is required for journeyman endorsement. Applicants from jurisdictions without an equivalent statewide license use verified out-of-state hours toward the standard route. Renewal requires 12 hours of approved CE per licensing cycle (8 core).

Moving to UtahLeaving Utah

Why Kansas has nothing to transfer

Kansas journeyman plumber

Licensed by cities and counties

Verified September 16, 2026· 6 sources

Kansas has no statewide journeyman plumber license and no state plumbing board. K.S.A. 12-1508 and 12-1509 only set a framework for the counties and cities that choose to license plumbers: they must use the ICC, IAPMO or Prometric standard exams, require a 75% score, verify two years of field experience (up to one year creditable from a 930-hour trade-school program), charge a uniform fee and require 12 hours of continuing education every two years, half of it code education. A journeyman certificate of competency earned that way is valid proof of competency in every other Kansas county or city that licenses plumbers without additional examination, but each jurisdiction still issues its own license and collects its own fee. Sedgwick County/Wichita (MABCD) and Topeka license journeyman plumbers individually; Johnson County licenses only plumbing contractors (Class DP) and issues no journeyman card. No Kansas jurisdiction found in this pass accepts another state's journeyman license in place of the exam (MABCD states it 'does not reciprocate with state testing'), so an out-of-state journeyman transfers only a qualifying ICC, IAPMO or Prometric score they may already hold, plus documented hours.

How local licensing works in Kansas

How local licensing works. Kansas has no state plumbing license, board or application. Under K.S.A. 12-1508 to 12-1509 a county or city that licenses plumbers must accept only the ICC, IAPMO or Prometric standard plumbing exams (and may ask no other questions), require a 75% passing score, verify two years of field experience under a licensed journeyman or master (one year of which may be a trade-school program of at least 930 hours), set one uniform exam and license fee for all applicants, and require 12 hours of continuing education biennially or six annually with half in code education. A journeyman certificate of competency issued on a standard exam 'shall be valid proof of competency for licensure, without additional examination, in any county or city of the state', and the receiving jurisdiction must issue its own certificate for its uniform fee (K.S.A. 12-1509(b)-(c)). The Attorney General has opined that a city may not use home-rule power to add licensing requirements beyond the act (AG Op. 1999-42). Medical gas piping additionally requires ASSE Series 6000 certification (K.S.A. 12-1509(g)). Nothing in the act addresses licenses from other states.

Sedgwick County and Wichita (MABCD). Requires every journeyman plumber working in Wichita or unincorporated Sedgwick County to hold an MABCD trade certificate. Plumbing journeyman: one year of field experience plus one year of plumbing trade school, or two years of field experience (documented on company letterhead with a description of the work), and a 75% or better score on ICC K9R Plumbing with Gas, ICC 560 Journeyman Plumber with Gas or the IAPMO journeyman exam; submit Form 19A with the official passing letter, transcripts and experience proof and pay $35. Certificates run two years and renew for $35 with three trade-specific and three general CEUs per year (12 per cycle), with penalty hours if expired. MABCD no longer sponsors exams; candidates test through Pearson VUE (ICC) or IAPMO. Out-of-state treatment: 'MABCD does not reciprocate with state testing, only those exams listed below are approved for Sedgwick County.' An out-of-state journeyman license is not accepted as a substitute; the applicant needs a passing ICC K9R/560 or IAPMO score (many states' ICC national journeyman plumber exams are the same 560 series, but MABCD requires the official letter naming the exam) and documented hours.

Johnson County (Olathe, Overland Park, Lenexa, Shawnee and the other cities in the county program). Johnson County Contractor Licensing issues contractor licenses only; there is no journeyman plumber license. Plumbing work is done by a company holding a Class DP Plumbing Contractor license ($100 application plus $225 per license type, $225 annual renewal, $75 late fee from Feb. 1) whose qualifying individual has passed the ICC Master Plumbing with Gas exam (557/KGF). A journeyman arriving from another state works as an employee of a licensed DP contractor without any personal county license. Applications include the ICC passing certification or approved alternative education, liability and workers' compensation certificates, and can take up to 10 days. V art. 17 'Electrical, Mechanical and Plumbing Trade Licensing'; the Unified Government's Building Inspection trade licensing and Prometric testing program). What ports is (1) a passing score on an ICC, IAPMO or Prometric standard journeyman plumber exam, documented by an official letter, and (2) verifiable field experience of at least two years. With those, the applicant obtains a certificate from the first Kansas jurisdiction they work in and can then be licensed in any other Kansas county or city without retesting under K.S.A. 12-1509(b), paying each jurisdiction's fee and meeting its CE.

Moving to KansasLeaving Kansas

Common questions

Do I have to take the Utah journeyman plumber exam if I'm licensed in Kansas?
Yes. Utah requires the trade exam on this path.
What does it cost to get a Utah journeyman plumber license from Kansas?
Published fees on this path total $116, not counting exam vendor fees or bonds.
Do my Kansas work hours count in Utah?
Yes. Documented out-of-state experience counts toward Utah's eligibility requirements.
Does it work the other way, from Utah to Kansas?
Not necessarily. Reciprocity is directed. Going from Utah to Kansas, the mechanism is not applicable.

Sources

  1. Utah Code 58-55-302 - Qualifications for licensure (Utah Construction Trades Licensing Act) · Utah Code 58-55-302; 58-1-302 (license by endorsement) · Utah State Legislature · Statute · verified September 16, 2026
  2. Utah DOPL - Plumbing Exam Information · Utah Division of Professional Licensing (DOPL) · Agency Page · verified September 16, 2026
  3. Apply for a Journeyman Plumber License (DOPL) · Utah Division of Professional Licensing (DOPL) · Agency Page · verified September 16, 2026
  4. Utah DOPL - Plumbing licensing home page · Utah Division of Professional Licensing (DOPL) · Agency Page · verified September 16, 2026
  5. Utah DOPL - Plumbing Continuing Education · Utah Division of Professional Licensing (DOPL) · Agency Page · verified September 16, 2026
  6. Endorsement to Utah: Journeyman Plumber (state-by-state equivalency map) · Utah Code 58-55; 58-1-302 · Utah Division of Professional Licensing (DOPL) · Other · verified September 16, 2026
  7. Utah Plumber Application (JP / RJP / MP / RMP) with Verification of Plumbing Experience forms, checklist and instructions · Utah Admin. Code R156-1-301 (cited on the form) · Utah Division of Professional Licensing (DOPL) · Form · verified September 16, 2026
  8. Utah Admin. Code R156-55c - Plumber Licensing Act Rule · Utah Admin. Code R156-55c · Utah Office of Administrative Rules · Admin Rule · verified September 16, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related